Labshake search
Citations for Eppendorf :
1 - 50 of 481 citations for 7 Chloro N 3 chloro 4 fluorophenyl 6 nitro 4 quinazolinamine since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Microbiology 2021Quote: ... centrifuged at 7000 RPM for 7 min at 4 °C (Eppendorf model 5804R). The supernatant was discarded ...
-
bioRxiv - Cell Biology 2022Quote: Samples were incubated on a rotator for 5 min at 4°C and then centrifuged at 500g for 5 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3). Supernatant was removed and pellet was resuspended in sort buffer [1mM EDTA (Invitrogen ...
-
bioRxiv - Cell Biology 2022Quote: ... Sorted nuclei were then centrifuged at 1000 g for 15 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3), and supernatant was removed ...
-
bioRxiv - Genomics 2022Quote: ... Beads and proteins were incubated for 3 hours at 4°C (Eppendorf ThermoMixer, 1,300 rpm). Beads were then washed four times with lysis buffer and recovered in 40 µl of laemmli buffer (50 mM Tris-Cl pH 6.8 ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C for 5 minutes (Eppendorf centrifuge 5810 R, Rotor S-4-104). Cell pellets were washed with 5 mL D-PBS and centrifugation was repeated ...
-
bioRxiv - Biochemistry 2021Quote: ... cell cultures were collected by centrifugation at 3,300 rpm for 3 min at 4°C (using Eppendorf centrifuge 5810R equipped with the A-4-62 rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the expelled homogenate was palleted by centrifugation for 3 min (at 300 g at 4°C) (Eppendorf). The pellet was discarded ...
-
bioRxiv - Neuroscience 2020Quote: The homogenates were pelleted at 400xg for 6 minutes at 4°C in a swing-bucket rotor centrifuge (Eppendorf). The supernatants were removed and 1 ml ice-cold DPBS (pH 7.3-7.4 ...
-
bioRxiv - Physiology 2022Quote: ... plasma was spun at 4°C (4 min, 4000g force, Eppendorf 5804R, Mississauga, ON), decanted and stored at −80°C for subsequent ELISAs ...
-
bioRxiv - Biochemistry 2021Quote: ... Unreacted dye was removed by two passages over an equilibrated Bio-spin® 6 column filled with Bio-gel P-6 media in labeling buffer and centrifuged in a tabletop centrifuge (Eppendorf 5810 R, rotor A-4-62) at 1500 rpm for 3 min ...
-
bioRxiv - Molecular Biology 2023Quote: ... Yeast were centrifuged at 3,000 rpm for 3 min in an A-4-62 swing bucket rotor (Eppendorf) and resuspended in 20 ml 1 M sorbitol and incubated at 4 °C overnight (<18 h) ...
-
bioRxiv - Neuroscience 2023Quote: ... The tubes were centrifuged at 3000 x g for 6 min at 4 °C and the conditioned media was transferred to a Protein LoBind tube (Eppendorf) (media fraction) ...
-
A DNA-based optical nanosensor for in vivo imaging of acetylcholine in the peripheral nervous systembioRxiv - Bioengineering 2020Quote: The DNA scaffold was self-assembled by incubating 5 DNA oligonucleotides following a temperature gradient from 95 °C to 4 °C for 6 h in a thermocycler (Mastercycler® nexus X2, Eppendorf) in Tris-EDTA buffer (TE buffer ...
-
bioRxiv - Neuroscience 2020Quote: ... and rotor (Eppendorf #S-4-72). Upon end of centrifugation ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 C (Eppendorf Centrifuge 5418 R). Proteins in the clear supernatant (protein extract ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 C (Eppendorf Centrifuge 5418 R). 15 µg of recombinant FAMOSS-streptavidin/streptavidin was added to supernatant and incubated 1h on ice with rotation ...
-
bioRxiv - Biophysics 2023Quote: ... with a micromanipulator InjectMan 4 (Eppendorf). The injection needles Femtotip II (Eppendorf ...
-
bioRxiv - Synthetic Biology 2024Quote: ... in a MasterCycler RealPlex 4 (Eppendorf). Each 20 μL qPCR reaction contained 90 ng of cDNA ...
-
bioRxiv - Biochemistry 2020Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, Eppendorf #A-4-81 rotor) to remove intact cells and debris ...
-
bioRxiv - Genomics 2023Quote: ... and centrifuged at 3,200 g and 4°C using a swinging-bucket rotor (Eppendorf A-4-81) for 5 mins ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Synthetic Biology 2022Quote: The concentration and quality of the plasmid solutions were determined by diluting 1 ul of plasmid solution in 4 ul of Tris EDTA buffer and loading 3 ul of the diluted solution on a μCuvette G1 (Eppendorf). Optical densities were measured at 260 nm and 280 nm using a BioSpectrophotometer and Fluorimeter (Eppendorf) ...
-
bioRxiv - Cell Biology 2019Quote: ... The lysate was centrifuged at 4°C at 3220 g for 15 min (Eppendorf #A-4-81 rotor) to remove intact cells and debris ...
-
bioRxiv - Immunology 2020Quote: ... (Eppendorf Centrifuge 5810R, rotor A-4-62) at room temperature ...
-
bioRxiv - Cell Biology 2021Quote: ... in a Realplex 4 PCR machine (Eppendorf), and values were normalized to rpl-32 as an internal control ...
-
bioRxiv - Biophysics 2022Quote: ... and a micro-manipulator (Injectman 4; Eppendorf). Injection pipettes were prepared from siliconized (Sigmacote ...
-
bioRxiv - Cell Biology 2023Quote: ... in a realplex 4 qPCR cycler (Eppendorf). To calculate the relative mtDNA levels ...
-
bioRxiv - Physiology 2019Quote: ... The remaining homogenate was heated for 10 min at 70°C and spun for 3 min at top speed at 4°C (Eppendorf 5415R). The supernatant was transferred to a new tube and heated for 10 min at 70°C ...
-
bioRxiv - Cancer Biology 2022Quote: ... Samples were vigorously vortex-mixed for 3 min and centrifuged at 14,000 rpm for 10 min at 4 °C (Eppendorf 5804 R). The clear supernatant was then transferred to a separate vial ...
-
bioRxiv - Plant Biology 2022Quote: ... annealing at 51 °C for 30 s and extension 72 °C for 30 s for 25 cycles by final extension 72 °C for 3 min and reaction hold at 4 °C in a thermocycler (Gradient thermocycler® Eppendorf). Amplified gene products were sequenced using the Sanger sequencing method ...
-
bioRxiv - Neuroscience 2023Quote: ... They were then resuspended to a concentration of ∼800-3000 nuclei per uL across 3-4 x twin.tec™ 96 Well LoBind PCR Plates (Eppendorf, 0030129512) in NSB ...
-
bioRxiv - Biochemistry 2022Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) to remove intact cells and debris ...
-
bioRxiv - Cell Biology 2020Quote: ... This isolation method included a penultimate centrifugation step in Eppendorf polypropylene conical tubes (10,000 x g for 30 min at 4°C, in Eppendorf rotor F-34-6-38) that allowed the removal/isolation of larger microvesicles ...
-
bioRxiv - Biochemistry 2020Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, Eppendorf #A-4-81 rotor) and washed with ice-cold 50 mL Binding buffer composed of 10 mM imidazole (pH 7.4) ...
-
bioRxiv - Microbiology 2021Quote: ... The samples were immediately cooled on ice and centrifuged for 12 min at 4°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf). The cell pellets were stored at −20°C until RNA extraction.
-
bioRxiv - Microbiology 2021Quote: ... The cells were transferred into anaerobic 50 mL reaction tubes inside the anaerobic chamber and harvested outside of the anaerobic chamber for 12 min at 4°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf). The supernatant was discarded inside the anaerobic chamber and the pellet was resuspended in fresh RCM medium to an OD600 of 5-10 ...
-
bioRxiv - Genomics 2019Quote: ... incubated for 5 min at 4 °C with rotation and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 μL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Bioengineering 2019Quote: For extract preparation each 4 mL of cell cultures from tp 48h of HDC run 1 were spun down for 10 min at 4000 g and 4 °C (Centrifuge 5804R, Rotor A-4-44, Eppendorf). Pellets were resuspended in fresh 1 mL ‘thylakoid buffer’ (50 mM HEPES-NaOH ...
-
bioRxiv - Systems Biology 2021Quote: ... Total volume of 20 mL from each culture was transferred to a 50 mL Falcon® filled with ice and was immediately centrifuged at 3000 rpm for 3 min at 4 °C (Eppendorf centrifuge). Next the supernatant was discarded and the cell pellet was snap frozen into liquid nitrogen and stored at -80 °C ...
-
bioRxiv - Systems Biology 2021Quote: For the extraction of total proteome 10 mL of each culture were transferred into ice-cold 15 mL Falcon® tubes which were centrifuged immediately at 3000 rpm for 3 min at 4 °C (Eppendorf centrifuge). The supernatant from the centrifugation was discarded and the cell pellets were washed once with 1 mL of cold PBS buffer ...
-
bioRxiv - Plant Biology 2023Quote: ... The primers were annealed at 95°C for 4 min followed by 70°C for 3 min in a thermocycler (Eppendorf, Hamburg, Germany). The reaction was allowed to cool slowly to room temperature ...
-
bioRxiv - Cell Biology 2022Quote: ... and InjectMan®4 micromanipulator (Cat#. 5192000035, Eppendorf) using external continuous pressure ...
-
bioRxiv - Immunology 2021Quote: ... at 10.000 rpm and 4°C (Eppendorf 5804R), for the removal of residual titanium [16].
-
bioRxiv - Cell Biology 2022Quote: ... for 10 minutes at 4°C (Eppendorf, Germany), and supernatants were transferred into fresh tubes to be evaporated to dryness in a CentreVap concentrator at 40°C (Labconco ...
-
bioRxiv - Bioengineering 2024Quote: ... 15 min at 4°C (Eppendorf, Hamburg, Germany). duRNA was generated through equimolar annealing of trRNA/crRNA in duplex buffer (IDT) ...
-
bioRxiv - Cell Biology 2019Quote: ... The resin was pelleted down by centrifugation at 4°C at 1258 g for 5 min (Eppendorf #A-4-81 rotor) and washed with 25 ml ice-cold binding buffer [10 mM imidazole ...
-
bioRxiv - Molecular Biology 2022Quote: ... Cell pellets of OD600 = 3-6 units (as measured using an Eppendorf BioPhotometer) were resuspended in 300 µL of 20 % TCA and 100 µL of acid-washed glass beads ...
-
bioRxiv - Biophysics 2020Quote: ... The cell suspension was subsequently centrifuged for 30 min at 4°C and 3250 × g (Eppendorf Swing-bucket rotor A-4-62). The supernatant was discarded ...