Labshake search
Citations for Eppendorf :
1 - 50 of 394 citations for 6 Chloro 4 methylpicolinonitrile since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2021Quote: ... Unreacted dye was removed by two passages over an equilibrated Bio-spin® 6 column filled with Bio-gel P-6 media in labeling buffer and centrifuged in a tabletop centrifuge (Eppendorf 5810 R, rotor A-4-62) at 1500 rpm for 3 min ...
-
bioRxiv - Neuroscience 2020Quote: The homogenates were pelleted at 400xg for 6 minutes at 4°C in a swing-bucket rotor centrifuge (Eppendorf). The supernatants were removed and 1 ml ice-cold DPBS (pH 7.3-7.4 ...
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Neuroscience 2023Quote: ... The tubes were centrifuged at 3000 x g for 6 min at 4 °C and the conditioned media was transferred to a Protein LoBind tube (Eppendorf) (media fraction) ...
-
A DNA-based optical nanosensor for in vivo imaging of acetylcholine in the peripheral nervous systembioRxiv - Bioengineering 2020Quote: The DNA scaffold was self-assembled by incubating 5 DNA oligonucleotides following a temperature gradient from 95 °C to 4 °C for 6 h in a thermocycler (Mastercycler® nexus X2, Eppendorf) in Tris-EDTA buffer (TE buffer ...
-
bioRxiv - Cell Biology 2020Quote: ... This isolation method included a penultimate centrifugation step in Eppendorf polypropylene conical tubes (10,000 x g for 30 min at 4°C, in Eppendorf rotor F-34-6-38) that allowed the removal/isolation of larger microvesicles ...
-
bioRxiv - Molecular Biology 2023Quote: ... and 6–6 droplets for the remaining days) were inoculated into 150-mm Petri dishes (Eppendorf, Hamburg, Germany), and the cells were allowed to attach to the surface for 2 h in a CO2 incubator (5% CO2 and 90% humidity) ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C for 5 minutes (Eppendorf centrifuge 5810 R, Rotor S-4-104). Cell pellets were washed with 5 mL D-PBS and centrifugation was repeated ...
-
bioRxiv - Bioengineering 2020Quote: The cjFFs were transfected at P4-6 with Multiporator (Eppendorf) according to the protocol provided by the manufacturer ...
-
bioRxiv - Neuroscience 2021Quote: ... with an fixed angled-rotor (FA-45-6-30, Eppendorf) and the virus pellet was resuspended in OPC-Sato medium for 1 hour at 4°C on a shaker ...
-
bioRxiv - Physiology 2022Quote: ... plasma was spun at 4°C (4 min, 4000g force, Eppendorf 5804R, Mississauga, ON), decanted and stored at −80°C for subsequent ELISAs ...
-
bioRxiv - Neuroscience 2020Quote: ... and rotor (Eppendorf #S-4-72). Upon end of centrifugation ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 C (Eppendorf Centrifuge 5418 R). Proteins in the clear supernatant (protein extract ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 C (Eppendorf Centrifuge 5418 R). 15 µg of recombinant FAMOSS-streptavidin/streptavidin was added to supernatant and incubated 1h on ice with rotation ...
-
bioRxiv - Synthetic Biology 2024Quote: ... in a MasterCycler RealPlex 4 (Eppendorf). Each 20 μL qPCR reaction contained 90 ng of cDNA ...
-
bioRxiv - Biophysics 2023Quote: ... with a micromanipulator InjectMan 4 (Eppendorf). The injection needles Femtotip II (Eppendorf ...
-
bioRxiv - Cell Biology 2022Quote: ... 100 μL droplets were inoculated into 6-well plates (Eppendorf, Hamburg, Germany). After allowing the cells to adhere to the surface for 2 hours in a CO2 incubator (37°C ...
-
bioRxiv - Biochemistry 2021Quote: ... for 6 h at 37 °C at 800 rpm (shaking incubator, Eppendorf). After RNAse A was removed by centrifugation ...
-
bioRxiv - Biochemistry 2020Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, Eppendorf #A-4-81 rotor) to remove intact cells and debris ...
-
bioRxiv - Genomics 2023Quote: ... and centrifuged at 3,200 g and 4°C using a swinging-bucket rotor (Eppendorf A-4-81) for 5 mins ...
-
bioRxiv - Cell Biology 2019Quote: ... The lysate was centrifuged at 4°C at 3220 g for 15 min (Eppendorf #A-4-81 rotor) to remove intact cells and debris ...
-
bioRxiv - Immunology 2020Quote: ... (Eppendorf Centrifuge 5810R, rotor A-4-62) at room temperature ...
-
bioRxiv - Cell Biology 2021Quote: ... in a Realplex 4 PCR machine (Eppendorf), and values were normalized to rpl-32 as an internal control ...
-
bioRxiv - Biophysics 2022Quote: ... and a micro-manipulator (Injectman 4; Eppendorf). Injection pipettes were prepared from siliconized (Sigmacote ...
-
bioRxiv - Cell Biology 2023Quote: ... in a realplex 4 qPCR cycler (Eppendorf). To calculate the relative mtDNA levels ...
-
bioRxiv - Molecular Biology 2022Quote: ... Cell pellets of OD600 = 3-6 units (as measured using an Eppendorf BioPhotometer) were resuspended in 300 µL of 20 % TCA and 100 µL of acid-washed glass beads ...
-
bioRxiv - Developmental Biology 2023Quote: ... Organoids were transferred to a 6 cm ultra-low-attachment dish (Eppendorf, 30701011) containing Tyrode’s solution (Sigma ...
-
bioRxiv - Biochemistry 2022Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) to remove intact cells and debris ...
-
bioRxiv - Biochemistry 2020Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, Eppendorf #A-4-81 rotor) and washed with ice-cold 50 mL Binding buffer composed of 10 mM imidazole (pH 7.4) ...
-
bioRxiv - Microbiology 2021Quote: ... The samples were immediately cooled on ice and centrifuged for 12 min at 4°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf). The cell pellets were stored at −20°C until RNA extraction.
-
bioRxiv - Microbiology 2021Quote: ... The cells were transferred into anaerobic 50 mL reaction tubes inside the anaerobic chamber and harvested outside of the anaerobic chamber for 12 min at 4°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf). The supernatant was discarded inside the anaerobic chamber and the pellet was resuspended in fresh RCM medium to an OD600 of 5-10 ...
-
bioRxiv - Genomics 2019Quote: ... incubated for 5 min at 4 °C with rotation and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 μL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Bioengineering 2019Quote: For extract preparation each 4 mL of cell cultures from tp 48h of HDC run 1 were spun down for 10 min at 4000 g and 4 °C (Centrifuge 5804R, Rotor A-4-44, Eppendorf). Pellets were resuspended in fresh 1 mL ‘thylakoid buffer’ (50 mM HEPES-NaOH ...
-
bioRxiv - Cell Biology 2020Quote: ... or western blot analysis (200 000 cells in 6-well plates (Eppendorf, cat# 0030720113) were left to attach for 48h ...
-
bioRxiv - Cell Biology 2021Quote: ... Cells were then seeded in a Matrigel-coated 6-well plate (Eppendorf, cat # 0030720113) to 2.5×106 cells/well with dual SMAD inhibitor media supplemented with Dorsomorphin (1μM ...
-
bioRxiv - Cell Biology 2022Quote: ... and InjectMan®4 micromanipulator (Cat#. 5192000035, Eppendorf) using external continuous pressure ...
-
bioRxiv - Immunology 2021Quote: ... at 10.000 rpm and 4°C (Eppendorf 5804R), for the removal of residual titanium [16].
-
bioRxiv - Cell Biology 2022Quote: ... for 10 minutes at 4°C (Eppendorf, Germany), and supernatants were transferred into fresh tubes to be evaporated to dryness in a CentreVap concentrator at 40°C (Labconco ...
-
bioRxiv - Bioengineering 2024Quote: ... 15 min at 4°C (Eppendorf, Hamburg, Germany). duRNA was generated through equimolar annealing of trRNA/crRNA in duplex buffer (IDT) ...
-
bioRxiv - Cell Biology 2019Quote: ... The resin was pelleted down by centrifugation at 4°C at 1258 g for 5 min (Eppendorf #A-4-81 rotor) and washed with 25 ml ice-cold binding buffer [10 mM imidazole ...
-
bioRxiv - Cancer Biology 2021Quote: ... 3-6 pooled tissue biopsies were moved into a precooled 1.5 mL tube (Eppendorf, Germany) containing 300µL digestion cocktail consisting of Gibco RPMI 1640 (Thermo Fisher Scientific ...
-
bioRxiv - Bioengineering 2019Quote: ... centrifuging for 5 min at 400 rcf (RT, Eppendorf 5430; Rotor: F-35-6-30), re-suspension in fresh medium and transfer to cultivation flask.
-
bioRxiv - Biochemistry 2021Quote: ... cells were seeded into 6-well or 12-well polystyrene coated plates (Eppendorf; EP0030720130, EP0030721012) at a density of 0.3 x 106 cells mL−1 or 0.1 x 106 cells mL−1 ...
-
bioRxiv - Biophysics 2020Quote: ... The cell suspension was subsequently centrifuged for 30 min at 4°C and 3250 × g (Eppendorf Swing-bucket rotor A-4-62). The supernatant was discarded ...
-
bioRxiv - Biochemistry 2022Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) and washed with ice-cold 50 mL Binding buffer composed of 10mM imidazole (pH 7.4) ...
-
bioRxiv - Biochemistry 2022Quote: ... 4 °C for 10 sec (5424-R Eppendorf microfuge) and the pellet was resuspended with 400 μl TES Solution (10 mM Tris-HCl ...
-
bioRxiv - Biophysics 2021Quote: ... 20°C for 4 hours (Thermomixer 5355 R, Eppendorf). After incubation ...
-
bioRxiv - Molecular Biology 2022Quote: ... Reactions were performed in a Realplex 4 Thermocycler (Eppendorf) using the following program ...
-
bioRxiv - Immunology 2024Quote: ... on a MasterCycler EP Realplex 4 thermal cycler (Eppendorf) in 96-well-plate format ...