Labshake search
Citations for Eppendorf :
1 - 50 of 727 citations for 4 Tert Butyldimethylsilyl Oxy Methyl 2 Iodothiazole since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2021Quote: ... Samples of 20 μΜ N-NTD or N-NTD-SR consisting of varied protein:nucleic acid molar ratios (8:1, 4:1, 2:1, 1:1, 1:2) were prepared in low-binding microtubes (Eppendorf® LoBind) in the presence of 10% PEG-4000 (w/v ...
-
bioRxiv - Microbiology 2022Quote: Cells (2 ml cultures) were spun down (30 s Eppendorf centrifuge, 14,000 rpm, 4 °C), resuspended in 0.4 ml ice-cold growth medium and added to a screw cap Eppendorf tube containing 1.5 g glass beads (0.1 mm) ...
-
bioRxiv - Cell Biology 2020Quote: ... The homogenate was further incubated on ice for 45 min before centrifugation at 21,000 g and 4°C for 2 x 10 min in an Eppendorf 5424 R benchtop centrifuge (Eppendorf). Protein content of the lysate was determined by BCA assay (Thermo Fisher) ...
-
bioRxiv - Neuroscience 2023Quote: ... and tubes centrifuged at 4 °C for 2 min at 12000 x g in a refrigerated microfuge (Eppendorf 5415R). The upper phase was discarded ...
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Developmental Biology 2023Quote: ... About 6 pl dCas9-KRAB mRNA and sgRNA mixes were injected into cytoplasm of zygotes between 2-4 hpi using a Piezo impact-driven micromanipulator (Eppendorf). For all micro-injection experiments ...
-
bioRxiv - Microbiology 2022Quote: ... The cell suspension was then transferred into 2 mL tubes and centrifuged at 16 000g and 4°C (Eppendorf, Germany) to pellet the cells ...
-
bioRxiv - Cancer Biology 2024Quote: ... The embryos were deyolked in ice cold Ringer’s solution using a micropipette tip and spun at 100 g for 2 min in a tabletop centrifuge at 4°C (Eppendorf, 5418R). The supernatant was discarded and the embryo bodies were trypsinized using TrypLE Express (Thermo Scientific ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C for 5 minutes (Eppendorf centrifuge 5810 R, Rotor S-4-104). Cell pellets were washed with 5 mL D-PBS and centrifugation was repeated ...
-
bioRxiv - Physiology 2022Quote: ... plasma was spun at 4°C (4 min, 4000g force, Eppendorf 5804R, Mississauga, ON), decanted and stored at −80°C for subsequent ELISAs ...
-
bioRxiv - Genomics 2024Quote: ... 4 °C with acceleration and deceleration set to 1 (Eppendorf 5910 Ri, Rotor S-4×400).
-
bioRxiv - Neuroscience 2020Quote: ... and rotor (Eppendorf #S-4-72). Upon end of centrifugation ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 C (Eppendorf Centrifuge 5418 R). Proteins in the clear supernatant (protein extract ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 C (Eppendorf Centrifuge 5418 R). 15 µg of recombinant FAMOSS-streptavidin/streptavidin was added to supernatant and incubated 1h on ice with rotation ...
-
bioRxiv - Synthetic Biology 2024Quote: ... in a MasterCycler RealPlex 4 (Eppendorf). Each 20 μL qPCR reaction contained 90 ng of cDNA ...
-
bioRxiv - Biophysics 2023Quote: ... with a micromanipulator InjectMan 4 (Eppendorf). The injection needles Femtotip II (Eppendorf ...
-
bioRxiv - Bioengineering 2024Quote: ... 4 °C (Eppendorf, Centrifuge 5810 R). Next ...
-
bioRxiv - Biochemistry 2020Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, Eppendorf #A-4-81 rotor) to remove intact cells and debris ...
-
bioRxiv - Genomics 2023Quote: ... and centrifuged at 3,200 g and 4°C using a swinging-bucket rotor (Eppendorf A-4-81) for 5 mins ...
-
bioRxiv - Immunology 2020Quote: ... (Eppendorf Centrifuge 5810R, rotor A-4-62) at room temperature ...
-
bioRxiv - Cell Biology 2021Quote: ... in a Realplex 4 PCR machine (Eppendorf), and values were normalized to rpl-32 as an internal control ...
-
bioRxiv - Biophysics 2022Quote: ... and a micro-manipulator (Injectman 4; Eppendorf). Injection pipettes were prepared from siliconized (Sigmacote ...
-
bioRxiv - Cell Biology 2023Quote: ... in a realplex 4 qPCR cycler (Eppendorf). To calculate the relative mtDNA levels ...
-
bioRxiv - Molecular Biology 2024Quote: Centrifuge rotor A-4-62 (Eppendorf, 022638009)
-
bioRxiv - Cell Biology 2024Quote: ... and a micro-manipulator (Injectman 4, Eppendorf). Injection needles were prepared from siliconized (Sigmacote ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Injection was performed with InjectMan 4 (Eppendorf) and Eppendorf femtotips using an Olympus IX71 microscope ...
-
bioRxiv - Cell Biology 2024Quote: ... with A-4-81 Rotor (Eppendorf, Germany) to remove the dead cells and cell debris ...
-
bioRxiv - Microbiology 2024Quote: ... spore suspensions (2 mL, in 2 mL Eppendorf tubes (Eppendorf SE®, DE) were directly exposed to either of the two temperatures for two weeks ...
-
bioRxiv - Biochemistry 2022Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) to remove intact cells and debris ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... and InjectMan NI 2 (Eppendorf). Cas9 protein (500 ng/μL) ...
-
bioRxiv - Biophysics 2024Quote: ... a 2 mL tube (Eppendorf), containing 1 mL of a 2% BSA + 0.2% FBS in PBS solution ...
-
bioRxiv - Biophysics 2024Quote: ... A 2 mL tube (Eppendorf), containing a suspended cells at a 5 million per mL concentration in a 2% BSA + 0.2% FBS in PBS solution ...
-
bioRxiv - Biochemistry 2020Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, Eppendorf #A-4-81 rotor) and washed with ice-cold 50 mL Binding buffer composed of 10 mM imidazole (pH 7.4) ...
-
bioRxiv - Microbiology 2021Quote: ... The samples were immediately cooled on ice and centrifuged for 12 min at 4°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf). The cell pellets were stored at −20°C until RNA extraction.
-
bioRxiv - Microbiology 2021Quote: ... The cells were transferred into anaerobic 50 mL reaction tubes inside the anaerobic chamber and harvested outside of the anaerobic chamber for 12 min at 4°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf). The supernatant was discarded inside the anaerobic chamber and the pellet was resuspended in fresh RCM medium to an OD600 of 5-10 ...
-
bioRxiv - Neuroscience 2024Quote: Suspensions were centrifuged at 4°C in 50 mL centrifuge tubes (Falcon) with a 5810R centrifuge and an A-4-81 rotor (Eppendorf) and in 38.5 mL polyallomer Ultra Clear ultracentrifuge tubes (Beckman Coulter ...
-
bioRxiv - Cell Biology 2022Quote: ... and InjectMan®4 micromanipulator (Cat#. 5192000035, Eppendorf) using external continuous pressure ...
-
bioRxiv - Immunology 2021Quote: ... at 10.000 rpm and 4°C (Eppendorf 5804R), for the removal of residual titanium [16].
-
bioRxiv - Cell Biology 2022Quote: ... for 10 minutes at 4°C (Eppendorf, Germany), and supernatants were transferred into fresh tubes to be evaporated to dryness in a CentreVap concentrator at 40°C (Labconco ...
-
bioRxiv - Bioengineering 2024Quote: ... 15 min at 4°C (Eppendorf, Hamburg, Germany). duRNA was generated through equimolar annealing of trRNA/crRNA in duplex buffer (IDT) ...
-
bioRxiv - Microbiology 2024Quote: ... or MasterCycler EP Realplex 4 thermal cycler (Eppendorf). Data were analyzed using recA and gyrA as internal controls ...
-
bioRxiv - Biophysics 2020Quote: ... The cell suspension was subsequently centrifuged for 30 min at 4°C and 3250 × g (Eppendorf Swing-bucket rotor A-4-62). The supernatant was discarded ...
-
bioRxiv - Biochemistry 2022Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) and washed with ice-cold 50 mL Binding buffer composed of 10mM imidazole (pH 7.4) ...
-
bioRxiv - Cancer Biology 2024Quote: ... on a RealPlex 2 Thermocycler (Eppendorf).
-
bioRxiv - Microbiology 2024Quote: ... and Mastercycler ep Realplex 2 (Eppendorf). Data was normalized by GAPDH or sigA expression level and all primers were designed using GenScript primer design software ...
-
bioRxiv - Cell Biology 2023Quote: ... The micromanipulator (Eppendorf InjectMan NI 2) was positioned and microinjection was performed using microinjector (Eppendorf FemtoJet ...
-
bioRxiv - Immunology 2022Quote: ... The micromanipulator (Eppendorf InjectMan NI 2) was mounted on an Andor Spinning Disc Microscope and microinjection was performed using the microinjector FemtoJet with a 100X oil immersion objective to facilitate immediate visualization and image acquisition after microinjection ...
-
bioRxiv - Microbiology 2024Quote: ... transferred to 2-ml tubes (Eppendorf), harvested by centrifugation at 7000 x g for 7 minutes and stored at –80°C until DNA isolation (see below).
-
bioRxiv - Biochemistry 2024Quote: ... (2) 200 μL pipette (Eppendorf, Germany), (3 ...
-
bioRxiv - Biochemistry 2022Quote: ... 4 °C for 10 sec (5424-R Eppendorf microfuge) and the pellet was resuspended with 400 μl TES Solution (10 mM Tris-HCl ...