Labshake search
Citations for Eppendorf :
1 - 50 of 1322 citations for 4 4 Fluoro 2 hydroxyphenyl methyl 2 6 bis 1 methylethyl 5 propyl 3 pyridinemethanol since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2021Quote: ... Samples of 20 μΜ N-NTD or N-NTD-SR consisting of varied protein:nucleic acid molar ratios (8:1, 4:1, 2:1, 1:1, 1:2) were prepared in low-binding microtubes (Eppendorf® LoBind) in the presence of 10% PEG-4000 (w/v ...
-
bioRxiv - Cell Biology 2022Quote: Samples were incubated on a rotator for 5 min at 4°C and then centrifuged at 500g for 5 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3). Supernatant was removed and pellet was resuspended in sort buffer [1mM EDTA (Invitrogen ...
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C for 5 minutes (Eppendorf centrifuge 5810 R, Rotor S-4-104). Cell pellets were washed with 5 mL D-PBS and centrifugation was repeated ...
-
bioRxiv - Microbiology 2022Quote: Cells (2 ml cultures) were spun down (30 s Eppendorf centrifuge, 14,000 rpm, 4 °C), resuspended in 0.4 ml ice-cold growth medium and added to a screw cap Eppendorf tube containing 1.5 g glass beads (0.1 mm) ...
-
bioRxiv - Plant Biology 2024Quote: ... Plants (3 plants in 2 mL Eppendorf tubes) were harvested at Zeitgeber time (ZT ...
-
bioRxiv - Biochemistry 2020Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, Eppendorf #A-4-81 rotor) to remove intact cells and debris ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Biochemistry 2022Quote: ... The lysate was centrifuged at 4°C (3220 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) to remove intact cells and debris ...
-
bioRxiv - Microbiology 2024Quote: ... Bacteria are centrifuged (5 min, 5 000 rpm, pre-cooled 4°C, Eppendorf 5430R) and pellets washed two times (500 mM sucrose ...
-
bioRxiv - Cell Biology 2020Quote: ... The homogenate was further incubated on ice for 45 min before centrifugation at 21,000 g and 4°C for 2 x 10 min in an Eppendorf 5424 R benchtop centrifuge (Eppendorf). Protein content of the lysate was determined by BCA assay (Thermo Fisher) ...
-
bioRxiv - Neuroscience 2023Quote: ... and tubes centrifuged at 4 °C for 2 min at 12000 x g in a refrigerated microfuge (Eppendorf 5415R). The upper phase was discarded ...
-
bioRxiv - Biochemistry 2020Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, Eppendorf #A-4-81 rotor) and washed with ice-cold 50 mL Binding buffer composed of 10 mM imidazole (pH 7.4) ...
-
bioRxiv - Developmental Biology 2023Quote: ... About 6 pl dCas9-KRAB mRNA and sgRNA mixes were injected into cytoplasm of zygotes between 2-4 hpi using a Piezo impact-driven micromanipulator (Eppendorf). For all micro-injection experiments ...
-
bioRxiv - Microbiology 2022Quote: ... The cell suspension was then transferred into 2 mL tubes and centrifuged at 16 000g and 4°C (Eppendorf, Germany) to pellet the cells ...
-
bioRxiv - Genomics 2024Quote: ... 4 °C with acceleration and deceleration set to 1 (Eppendorf 5910 Ri, Rotor S-4×400).
-
bioRxiv - Biochemistry 2022Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) and washed with ice-cold 50 mL Binding buffer composed of 10mM imidazole (pH 7.4) ...
-
bioRxiv - Cancer Biology 2024Quote: ... The embryos were deyolked in ice cold Ringer’s solution using a micropipette tip and spun at 100 g for 2 min in a tabletop centrifuge at 4°C (Eppendorf, 5418R). The supernatant was discarded and the embryo bodies were trypsinized using TrypLE Express (Thermo Scientific ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were maintained in a humidified atmosphere of 5% CO2 and 37 °C and were passaged every 2-3 days into 10 cm polystyrene coated plates (Eppendorf; EP0030700112-300EA) upon reaching high density ...
-
bioRxiv - Neuroscience 2020Quote: ... in PBS) and pelleted again (500 × g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 500 μL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Neuroscience 2024Quote: ... samples were centrifuged at 4°C for 5 minutes (Eppendorf 5417R Refrigerated Centrifuge) at 16,400 rpm ...
-
bioRxiv - Neuroscience 2024Quote: ... Samples were centrifuged at 4°C for 5 minutes (Eppendorf 5417R Refrigerated Centrifuge) at 16,400 rpm ...
-
bioRxiv - Microbiology 2024Quote: ... via centrifugation (5-10 min, 3220 rcf, 4°C, Centrifuge 5810 R; Eppendorf). Then the pellet was resuspended thoroughly in ice-cold 1xPBS and fixed by 1:1 dilution in ice-cold absolute ethanol ...
-
bioRxiv - Cell Biology 2022Quote: ... Sorted nuclei were then centrifuged at 1000 g for 15 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3), and supernatant was removed ...
-
bioRxiv - Genomics 2022Quote: ... Beads and proteins were incubated for 3 hours at 4°C (Eppendorf ThermoMixer, 1,300 rpm). Beads were then washed four times with lysis buffer and recovered in 40 µl of laemmli buffer (50 mM Tris-Cl pH 6.8 ...
-
bioRxiv - Systems Biology 2023Quote: ... and incubated on ice for 1 min before pelleting with a swinging-bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). Supernatant was gently removed and ∼50 µl were left behind to increase nuclei recovery ...
-
bioRxiv - Genomics 2024Quote: ... and incubated on ice for 1 minute before pelleting with a swinging-bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). The supernatant was gently removed and ∼50 µl were left behind to increase nuclei recovery ...
-
bioRxiv - Immunology 2021Quote: ... lifted cells were centrifuged at 15,000g for 5 minutes at 4°C (Eppendorf 5430R). Cell pellets were placed at −20°C overnight with 60 μL SDS Lysis buffer (1% SDS ...
-
bioRxiv - Cell Biology 2024Quote: ... and pelleted by centrifugation at 0.4xg at 4°C for 5 min (5415R; Eppendorf). Cells were resuspended in TNE buffer and homogenized using a 25-gauge needle ...
-
bioRxiv - Neuroscience 2022Quote: ... Half medium was changed every 2-3 days using Xplorer multichannel pipettes (Eppendorf) set at lowest speed to not disturb the hostdonor interaction ...
-
bioRxiv - Physiology 2023Quote: ... for 1 h at 4 □ on a ThermoMixer C (Eppendorf), 350 µl of water and 250 µl of chloroform were added to the mixture to induce phase separation ...
-
bioRxiv - Bioengineering 2024Quote: ... centrifuged (Eppendorf 5810R, 3,220 x g, 4 °C, 1 min), and the absorbance was measured at 494 nm (CLARIOstar ...
-
bioRxiv - Biochemistry 2020Quote: ... The solution was centrifuged at ~3220 g for 5 min (Eppendorf #A-4-81 rotor) to pellet down precipitated dyes ...
-
bioRxiv - Neuroscience 2020Quote: ... in PBS) and pelleted again (500 x g, 5 min, 4°C; 5920R, Eppendorf, RRID:SCR_018092). Nuclei were resuspended in 500 µL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...
-
bioRxiv - Cancer Biology 2024Quote: ... Nuclei were pelleted with a swinging bucket centrifuge (500xg, 5 min, 4°C; 5920R, Eppendorf) and resuspended in 500µL of sort buffer (1% Fatty acid free BSA (7500804 ...
-
bioRxiv - Genomics 2021Quote: ... Nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Genomics 2021Quote: ... nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Biochemistry 2021Quote: ... cell cultures were collected by centrifugation at 3,300 rpm for 3 min at 4°C (using Eppendorf centrifuge 5810R equipped with the A-4-62 rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the expelled homogenate was palleted by centrifugation for 3 min (at 300 g at 4°C) (Eppendorf). The pellet was discarded ...
-
bioRxiv - Neuroscience 2020Quote: The homogenates were pelleted at 400xg for 6 minutes at 4°C in a swing-bucket rotor centrifuge (Eppendorf). The supernatants were removed and 1 ml ice-cold DPBS (pH 7.3-7.4 ...
-
bioRxiv - Neuroscience 2024Quote: Transgenic male and female flies were maintained under a dark condition for 4-6 days after eclosion and then transferred to a plastic tube (1.5 mL, Eppendorf) containing ∼200 µL of fly food ...
-
bioRxiv - Physiology 2022Quote: ... plasma was spun at 4°C (4 min, 4000g force, Eppendorf 5804R, Mississauga, ON), decanted and stored at −80°C for subsequent ELISAs ...
-
bioRxiv - Cell Biology 2021Quote: ... cells were recovered in 1 mL YPD (1% yeast extract, 2% Bacto peptone, 2% D-glucose) at 30°C in a ThermoMixer C (Eppendorf, Hamburg, Germany) for 3 hours (200 RPM ...
-
bioRxiv - Biochemistry 2021Quote: ... Unreacted dye was removed by two passages over an equilibrated Bio-spin® 6 column filled with Bio-gel P-6 media in labeling buffer and centrifuged in a tabletop centrifuge (Eppendorf 5810 R, rotor A-4-62) at 1500 rpm for 3 min ...
-
bioRxiv - Cell Biology 2022Quote: For esiRNA transfection 35,000 U2OS cells were seeded in 2 ml medium in 6-well plates (Eppendorf) the evening before transfection ...
-
bioRxiv - Molecular Biology 2023Quote: ... Yeast were centrifuged at 3,000 rpm for 3 min in an A-4-62 swing bucket rotor (Eppendorf) and resuspended in 20 ml 1 M sorbitol and incubated at 4 °C overnight (<18 h) ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Samples were then extracted for 3 hr at 4°C in a ThermoMixer (Eppendorf US, Enfield, CT, USA), followed by evaporation of the methanol component with a speedvac concentrator (Thermo Fisher Scientific ...
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Neuroscience 2023Quote: ... The tubes were centrifuged at 3000 x g for 6 min at 4 °C and the conditioned media was transferred to a Protein LoBind tube (Eppendorf) (media fraction) ...
-
bioRxiv - Genomics 2020Quote: ... Nuclei were pelleted with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf) and resuspended in 500 μL high salt tagmentation buffer (36.3 mM Tris-acetate (pH = 7.8) ...