Labshake search
Citations for Eppendorf :
1 - 50 of 773 citations for 3' Methyl 1 1' biphenyl 4 amine since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2021Quote: ... Samples of 20 μΜ N-NTD or N-NTD-SR consisting of varied protein:nucleic acid molar ratios (8:1, 4:1, 2:1, 1:1, 1:2) were prepared in low-binding microtubes (Eppendorf® LoBind) in the presence of 10% PEG-4000 (w/v ...
-
bioRxiv - Neuroscience 2024Quote: ... regionalized neural organoids (1-3 organoids per one Eppendorf tube) were transferred into a 1.5 mL Eppendorf tube containing 200 μL of the neural medium ...
-
bioRxiv - Physiology 2023Quote: ... for 1 h at 4 □ on a ThermoMixer C (Eppendorf), 350 µl of water and 250 µl of chloroform were added to the mixture to induce phase separation ...
-
bioRxiv - Bioengineering 2024Quote: ... centrifuged (Eppendorf 5810R, 3,220 x g, 4 °C, 1 min), and the absorbance was measured at 494 nm (CLARIOstar ...
-
bioRxiv - Genomics 2024Quote: ... 4 °C with acceleration and deceleration set to 1 (Eppendorf 5910 Ri, Rotor S-4×400).
-
bioRxiv - Cell Biology 2022Quote: Samples were incubated on a rotator for 5 min at 4°C and then centrifuged at 500g for 5 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3). Supernatant was removed and pellet was resuspended in sort buffer [1mM EDTA (Invitrogen ...
-
bioRxiv - Cell Biology 2022Quote: ... Sorted nuclei were then centrifuged at 1000 g for 15 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3), and supernatant was removed ...
-
bioRxiv - Bioengineering 2023Quote: ... MPCs were washed twice for 3 min at 400 RCF at room temperature with PBS supplemented with 1% glucose and 1% pen-strep (Eppendorf 5702R, Hamburg, Germany). Biotinylation of the cell surface was performed by adding 1 mM Sulfo-NHS-LC-Biotin (Thermo Fisher ...
-
bioRxiv - Genomics 2022Quote: ... Beads and proteins were incubated for 3 hours at 4°C (Eppendorf ThermoMixer, 1,300 rpm). Beads were then washed four times with lysis buffer and recovered in 40 µl of laemmli buffer (50 mM Tris-Cl pH 6.8 ...
-
bioRxiv - Biochemistry 2022Quote: ... 0.01% Tween 20) for 1 h at 4 °C and 1200 rpm in a thermomixer (Eppendorf). Unbound protein was removed by washing 2x with high salt buffer (50 mM HEPES pH 7.5 ...
-
bioRxiv - Biochemistry 2020Quote: ... The rest of the solution was incubated at 4 °C for 1 h on a thermomixer (Eppendorf) set to 1000 rpm ...
-
bioRxiv - Molecular Biology 2020Quote: ... Cell debris was removed via centrifugation at 13,000g for 1 hour at +4°C (Eppendorf 5810r centrifuge). A 1 ml HisTrap FF Crude chromatography column (GE Healthcare ...
-
bioRxiv - Biochemistry 2021Quote: ... cell cultures were collected by centrifugation at 3,300 rpm for 3 min at 4°C (using Eppendorf centrifuge 5810R equipped with the A-4-62 rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the expelled homogenate was palleted by centrifugation for 3 min (at 300 g at 4°C) (Eppendorf). The pellet was discarded ...
-
bioRxiv - Molecular Biology 2023Quote: ... The mixture was sonicated 3 times for 1 minute in a waterbath sonicator and incubated in a ThermoMixer (Eppendorf) for 30 minutes at 37°C and 500 rpm ...
-
bioRxiv - Biophysics 2021Quote: ... The bicelle mixture (~1 mL) was centrifuged (13,400 rpm, Eppendorf F45-12-11 rotor, 4°C, 30 sec) to remove insoluble debris and the supernatant concentrated to ~200 μL using a 0.5 mL 10 kDa MWCO centrifugal filter (Amicon ...
-
bioRxiv - Cell Biology 2022Quote: ... The mixture was shaken for 1 hour at 4°C and 1400 rpm in a Thermomixer (Eppendorf, Germany). The samples were spun down at 14000 rpm ...
-
bioRxiv - Molecular Biology 2024Quote: ... with shaking at 1,200 RPM and 4° C for 1 h using a temperature-controlled Thermomixer 22331 (Eppendorf). The beads were pelleted at 500 x g for 1 min and the supernatant removed to become the unbound fraction ...
-
bioRxiv - Molecular Biology 2023Quote: ... Yeast were centrifuged at 3,000 rpm for 3 min in an A-4-62 swing bucket rotor (Eppendorf) and resuspended in 20 ml 1 M sorbitol and incubated at 4 °C overnight (<18 h) ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Samples were then extracted for 3 hr at 4°C in a ThermoMixer (Eppendorf US, Enfield, CT, USA), followed by evaporation of the methanol component with a speedvac concentrator (Thermo Fisher Scientific ...
-
bioRxiv - Biophysics 2022Quote: ... the DNA droplet-containing aqueous phase was layered on top of the oil phase in a volumetric ratio of 1:3 within a microtube (Eppendorf). For the segregation of DNA droplets using enzymatic activity ...
-
bioRxiv - Biophysics 2022Quote: ... The aqueous solution was layered on top of the oil-surfactant mix in a volumetric ratio of 1:3 inside a microtube (Eppendorf). The tube was manually shaken for about 30 s until water-in-oil droplets formed ...
-
bioRxiv - Biophysics 2020Quote: ... the DNA-containing aqueous phase was layered on top of the oil phase in a volumetric ratio of 1:3 within a microtube (Eppendorf). Droplet formation was induced by manual shaking for about 4 s as described earlier.[26] For the oil-phase ...
-
bioRxiv - Genomics 2024Quote: ... and washed in nuclease-free H2O before proceeding to MNase digestion with 1-2U of MNase for 3×106 cells that went on for 1-hour at 37C while shaking in a thermomixer (Eppendorf) at 550rcf ...
-
bioRxiv - Biochemistry 2022Quote: ... The rest of the solution was incubated at 4°C for 1 hour on a thermomixer (Eppendorf, Hamburg, Germany) set to 1000 rpm ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The sample was subsequently centrifuged for 1 h at 11,000 x g at 4°C in an Eppendorf tabletop centrifuge 5810R (Eppendorf). The phage pellet was resuspended in 400 μl DNAseI buffer (10 mM Tris-HCl ...
-
bioRxiv - Systems Biology 2023Quote: ... and incubated on ice for 1 min before pelleting with a swinging-bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). Supernatant was gently removed and ∼50 µl were left behind to increase nuclei recovery ...
-
bioRxiv - Genomics 2022Quote: ... The beads were then incubated 1 h with the anti-Myc antibody (9E10) at 4°C (Eppendorf ThermoMixer, 1,300 rpm), washed three times in PBS/0.1 % BSA and two times in lysis buffer ...
-
bioRxiv - Molecular Biology 2024Quote: ... 1 mM D-L methionine) for 1 h at 4° C with shaking at 1400 rpm in a benchtop thermomixer 22331(Eppendorf). The beads were washed twice with binding buffer without soybean trypsin inhibitor and suspended in 50 % v/v binding buffer ...
-
bioRxiv - Evolutionary Biology 2024Quote: 15mL of a Salten solution (1011 PFU/mL) was distributed into 1.5mL polypropylene tubes and centrifuged for 1 hour at 16,000g at 4°C (Eppendorf Centrifuge 5415R). Pellets were resuspended in 100µL of 100 mM of ammonium acetate (NH4-CH3CO2 ...
-
bioRxiv - Genomics 2024Quote: ... and incubated on ice for 1 minute before pelleting with a swinging-bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). The supernatant was gently removed and ∼50 µl were left behind to increase nuclei recovery ...
-
bioRxiv - Plant Biology 2024Quote: ... SDS at a 1:3 (w/v) ratio and extracted by shaking 1000 RPM 95 °C for using a tabletop shaker (Eppendorf ThermoMixer F2.0). Samples were then centrifuged at 20,000 xg for 10 min at room temperature and the supernatant retained in new tubes ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Synthetic Biology 2022Quote: The concentration and quality of the plasmid solutions were determined by diluting 1 ul of plasmid solution in 4 ul of Tris EDTA buffer and loading 3 ul of the diluted solution on a μCuvette G1 (Eppendorf). Optical densities were measured at 260 nm and 280 nm using a BioSpectrophotometer and Fluorimeter (Eppendorf) ...
-
bioRxiv - Bioengineering 2020Quote: ... and microbubbles were isolated by 4 centrifugation wash cycles at 40 relative centrifugation force for 1 min (Eppendorf 5804, Hamburg, Germany), where the infranatant was discarded and the microbubble concentrate was saved and resuspended.
-
bioRxiv - Microbiology 2024Quote: ... The crude EV fractions were prepared by ultracentrifugation (45,000 rpm, 1 h, 4°C; S50A rotor, Himac Ultracentrifuge CS100GXII; Eppendorf Himac Technologies) of the thus prepared supernatants.
-
bioRxiv - Bioengineering 2023Quote: ... Cells were stained for 1 hour at a temperature of 4°C with shaking at 600 rpm in a Thermomixer comfort (Eppendorf, Germany). Stained cells were washed with ice cold FACS buffer twice before resuspension in FACS buffer for analysis ...
-
bioRxiv - Cell Biology 2024Quote: ... The protoplasts were collected by centrifugation at 1700 rpm for 1 minute using a swing-bucket rotor (Eppendorf S-4-72), washed with 15 mL of ice-cold solution 3 (26.4 g of ammonium sulfate ...
-
bioRxiv - Microbiology 2024Quote: ... An overnight culture of 1 ml was pelleted down by centrifugation ((10,000 rpm at 4°C for 10 min; Eppendorf centrifuge 5810R) and washed thrice with M9 minimal (M9M ...
-
bioRxiv - Cancer Biology 2022Quote: ... Samples were vigorously vortex-mixed for 3 min and centrifuged at 14,000 rpm for 10 min at 4 °C (Eppendorf 5804 R). The clear supernatant was then transferred to a separate vial ...
-
bioRxiv - Plant Biology 2022Quote: ... annealing at 51 °C for 30 s and extension 72 °C for 30 s for 25 cycles by final extension 72 °C for 3 min and reaction hold at 4 °C in a thermocycler (Gradient thermocycler® Eppendorf). Amplified gene products were sequenced using the Sanger sequencing method ...
-
bioRxiv - Neuroscience 2024Quote: ... They were then resuspended to a concentration of ∼800-3000 nuclei per uL across 3-4 x twin.tec™ 96 Well LoBind PCR Plates (Eppendorf, 0030129512) in NSB ...
-
bioRxiv - Immunology 2022Quote: ... 20 μL of mAb solution was added to the cells in the filter wells and the cells were incubated for 1 h at 4 °C and 750 RPM on a thermomixer (Eppendorf, ThermoMixer C). After the incubation ...
-
bioRxiv - Microbiology 2023Quote: Liquid samples in 1 ml were collected and centrifuged for 20 min at 21 130 × g at 4°C (Centrifuge 5424 R; Eppendorf, Hamburg, Germany). The supernatants were used for chemical analyses by applying external standards for calibration and quality control ...
-
bioRxiv - Molecular Biology 2024Quote: ... 1:1v/v mixture of 33% ammonium hydroxide and 40% methylamine in water for 3 h at 37 °C (Eppendorf ThermoMixer C, 1000 rpm). The suspension was filtered ...
-
bioRxiv - Systems Biology 2021Quote: ... Total volume of 20 mL from each culture was transferred to a 50 mL Falcon® filled with ice and was immediately centrifuged at 3000 rpm for 3 min at 4 °C (Eppendorf centrifuge). Next the supernatant was discarded and the cell pellet was snap frozen into liquid nitrogen and stored at -80 °C ...
-
bioRxiv - Systems Biology 2021Quote: For the extraction of total proteome 10 mL of each culture were transferred into ice-cold 15 mL Falcon® tubes which were centrifuged immediately at 3000 rpm for 3 min at 4 °C (Eppendorf centrifuge). The supernatant from the centrifugation was discarded and the cell pellets were washed once with 1 mL of cold PBS buffer ...
-
bioRxiv - Plant Biology 2023Quote: ... The primers were annealed at 95°C for 4 min followed by 70°C for 3 min in a thermocycler (Eppendorf, Hamburg, Germany). The reaction was allowed to cool slowly to room temperature ...
-
bioRxiv - Cancer Biology 2023Quote: ... at 4°C for 1 hour and centrifuged at 4°C at 14200 rpm for 50 min using a refrigerated table-top centrifuge (Eppendorf Centrifuge, Hamburg, Germany). The cleared lysates were loaded on wells of 96-well single-use filter micro-plates with 3 µm glass fibers and 25 µm polyethylene membranes (Agilent ...
-
bioRxiv - Biochemistry 2024Quote: ... The samples were then digested for 4 h at 37°C (1000 x rpm for 1 h, then 650 x rpm, Eppendorf ThermoMixer®C). Samples were then diluted 1:1 with milliQ water ...