Labshake search
Citations for Eppendorf :
151 - 200 of 307 citations for 26S Proteasome Non ATPase Regulatory Subunit 10 PSMD10 Antibody since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2020Quote: ... the Falcon tubes were centrifuged at 3500 rpm for 10 min in a swinging bucket centrifuge (Eppendorf, Germany) to separate the solid residue from the digested biomass ...
-
bioRxiv - Microbiology 2022Quote: ... 10 mM MgSO4) centrifuged on the following day (centrifuge 5430R, rotor FA-45-24-11HS; Eppendorf, Hamburg, Germany) at 10,000 g for 10 min ...
-
bioRxiv - Immunology 2021Quote: ... 10 pl plasmid solution was injected with a pressure of 600 hPa into IVF-produced zygotes (FemtoJet, Eppendorf). The injected zygotes were cultured in PZM-3 medium at 39 °C ...
-
bioRxiv - Cell Biology 2022Quote: ... Lipids were resuspended in 10 mM methanolic ammonium acetate and transferred to 96-well plates (Eppendorf Twintec 96). Mass spectrometry was performed on a Sciex QTRAP 6500+ mass spectrometer ...
-
bioRxiv - Cell Biology 2022Quote: ... and the other half was treated at 55°C for 10 minutes in a thermocycler (Eppendorf Mastercycler ProS) before being transferred to YPD ...
-
bioRxiv - Cell Biology 2023Quote: ... Resuspended cells were then plated in 10 cm dishes and incubated inside a cell culture incubator (Eppendorf, Germany) at 37°C with 5% CO2 for ninety minutes ...
-
bioRxiv - Microbiology 2023Quote: ... Following a low speed-centrifugation for 10 min at 1,000 rpm in a R4702 centrifuge (Eppendorf, Hauppauge, NY) to remove rabbit Sf1Ep cells ...
-
bioRxiv - Immunology 2023Quote: ... the sample was briefly vortexed and incubated at 56°C for 10 minutes with a Thermomixer C (Eppendorf) at 1000 rpm ...
-
bioRxiv - Microbiology 2023Quote: ... The supernatants were then collected and centrifuged for 10 min at 12,000×g in a refrigerated centrifuge (Eppendorf) and filtered by using a 0.2 μm syringe filter ...
-
bioRxiv - Systems Biology 2023Quote: ... The protein extract from respective samples was spun down at 13,000 g for 10 mins and supernatant was collected in low adhesion 1.5 mL tubes (Eppendorf). We reduced the sample with 15 mM DTT (Sigma Aldrich ...
-
bioRxiv - Biochemistry 2023Quote: ... Protein fractions of interest were pooled and concentrated using an amicon of 10 kDa MWCO (Eppendorf 5804R, ∼3000g), before being loaded onto a size exclusion Superdex 75 HiLoad 16/600pg column (GE-Healthcare) ...
-
bioRxiv - Biochemistry 2023Quote: ... Protein fractions of interest were pooled and concentrated using an amicon of 10 kDa MWCO (Eppendorf 5804R, ∼3000g) at 4°C ...
-
bioRxiv - Plant Biology 2021Quote: ... Samples were centrifuged at 16.000 x g for 10 min and 100 μL supernatant were transferred to a 1.5 mL low binding micro reaction tube (Eppendorf). For SH-group alkalization ...
-
bioRxiv - Cell Biology 2020Quote: ... and cell debris was spun down at 20,000xg for 10 minutes at 4°C using a 5810 R Centrifuge (Eppendorf). Protein concentration was estimated using the Pierce BCA Protein Assay Kit (Thermo Fisher Scientific ...
-
bioRxiv - Cell Biology 2020Quote: ... Samples were then analyzed by centrifugation at 13,000 rpm for 10 min (Eppendorf table top centrifuge, Eppendorf, Hamburg, Germany) at room temperature ...
-
bioRxiv - Genomics 2020Quote: ... The lysates were then incubated at 37°C for 10 minutes at 1150 rpm shaking on a Thermomixer (Eppendorf). Lysates were cleared by centrifugation at 15,000g for 2 minutes ...
-
bioRxiv - Microbiology 2019Quote: ... The tube was centrifuged for 10 min at 2000 rpm using an A-4-81 swinging-bucket rotor (Eppendorf). The oil was carefully decanted ...
-
bioRxiv - Bioengineering 2021Quote: ... The second spin protocol applied in plasma quality measurements was 12,000×g RCF for 10 minutes with a commercial high-speed microcentrifuge (5417 R, Eppendorf), also based on cfDNA studies [15].
-
bioRxiv - Microbiology 2019Quote: ... USA) followed by centrifugation at 7000 × g at 4° C for 10 minutes (Centrifuge 5430 R, Eppendorf AG, Germany). The resulting supernatant was used as the WCP sample and stored at -20° C until used.
-
bioRxiv - Biophysics 2020Quote: ... or 1 mM LY294,002 and 10 μg/ml Alexa594 were prepared in DB and loaded into Femtotips II (Eppendorf). The tip mounted on the micromanipulator (TransferMan 4r or TransferMan NK2 ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... samples were centrifugated at 15’000 g for 10 minutes and supernatants were dried at room temperature with a vacuum centrifuge (Eppendorf). Pellets were then resuspended in 1 mL solution containing 3% ACN and 0.1% of TFA and subsequently purified on Oasis HLB SPE columns (Waters ...
-
bioRxiv - Cancer Biology 2019Quote: ... treated cells washed and scrapped in chilled PBS followed by pop-spin for 10 sec in tabletop centrifuge (Eppendorf). After discarding supernatants ...
-
bioRxiv - Cell Biology 2019Quote: ... Approximately 5– 10 nl of cell suspension was microinjected into the pericardial cavity of the embryo using CellTramVario (Eppendorf), Injectman Ni2 (Eppendorf ...
-
bioRxiv - Biochemistry 2019Quote: ... The supernatant from 300 × g was transferred to new 15mL tube and then centrifuged at 2,000 × g for 10 min at 4°C (# 5720R Eppendorf). The supernatant from 2,000 × g was transferred to 30mL conical tube and then centrifuged at 10,000 × g for 10 min at 4°C (# Avanti J-E JA25-50 Beckman Coulter) ...
-
bioRxiv - Molecular Biology 2020Quote: ... The resulting suspension was centrifuged 20,000×g for 10 minutes at room temperature in a table-top micro-centrifuge (Eppendorf), and 100 μl of the supernatant was subjected to immune precipitation using the anti-HA antiserum.
-
bioRxiv - Molecular Biology 2020Quote: The resulting pellets were washed with ice-cold acetone (to neutralize the TCA and solvate lipids) and centrifuged at 20,000×g for 10 minutes in a table-top micro-centrifuge (Eppendorf). The obtained pellets were air-dried to rid them of residual acetone and solubilized with 120 μl Tris-SDS (10 mM Tris-HCl pH 7.5 and 2% SDS ...
-
bioRxiv - Bioengineering 2021Quote: ... The tube was centrifuged for 10 min at 1,000x rpm at 4°C with minimum acceleration and deceleration (5810R Centrifuge, Eppendorf). Any fluid expelled was collected into 1.5 mL tubes ...
-
bioRxiv - Synthetic Biology 2019Quote: ... Samples were prepared by centrifuging 1-mL samples taken from the working electrode chambers for 10 minutes at 13,000 rpm in a microcentrifuge (Minispin Plus, Eppendorf) to remove cells ...
-
bioRxiv - Microbiology 2021Quote: ... cells equivalent to 1 OD600 were pelleted by centrifugation at 2,808 x g for 10 min (Eppendorf 5810 R) and the pellets were flash frozen ...
-
bioRxiv - Immunology 2020Quote: ... Process development was performed in a scale-down models in a 10 L glass-vessel bioreactor (BioFlo 320, Eppendorf). Established process parameters were then scaled up to 120 L in a BioFlo Pro 150 stainless steel fermenter (Eppendorf) ...
-
bioRxiv - Zoology 2020Quote: ... The tissue samples were separately placed in 400 µl of 10% Chelex solution in a 1.5 mL tube (Eppendorf) and crushed using a pestle (Eppendorf) ...
-
bioRxiv - Cell Biology 2020Quote: ... followed by 50°C for 30 min and 60°C for 10 min with mixing on a Thermomixer (Eppendorf).
-
bioRxiv - Neuroscience 2020Quote: ... The supernatant was transferred to a 30-mL conical tube and centrifuged at 10,000 × g for 10 min at 4°C (#5424R Eppendorf). The supernatant filtered through a 0.22-μm polyethersulfone membrane filter (# SLGP033RS EMD Millipore ...
-
bioRxiv - Neuroscience 2020Quote: ... The supernatant was transferred to a new 15-mL polypropylene tube and centrifuged at 2,000 × g for 10 min at 4°C (# 5720R Eppendorf). The supernatant was transferred to a 30-mL conical tube and centrifuged at 10,000 × g for 10 min at 4°C (#5424R Eppendorf) ...
-
bioRxiv - Cell Biology 2020Quote: ... The homogenate was further incubated on ice for 45 min before centrifugation at 21,000 g and 4°C for 2 x 10 min in an Eppendorf 5424 R benchtop centrifuge (Eppendorf). Protein content of the lysate was determined by BCA assay (Thermo Fisher) ...
-
bioRxiv - Microbiology 2020Quote: ... Reactions were pre-heated (37 °C for 10 min) in a Thermomixer C incubator with a heated lid (Eppendorf), before addition of the enzyme to 1 μM (in a final reaction volume of 100 μl ...
-
bioRxiv - Immunology 2020Quote: ... and 200 nM forward and reverse primers (Supplemental Table 10) (Integrated DNA Technologies) on a Mastercycler realplex2 thermocycler (Eppendorf). Primers were designed using the qPCR setting on Primer3Plus (39) ...
-
bioRxiv - Molecular Biology 2022Quote: ... we further purified the extracts by treatment with 1% sodium dodecyl sulfate in NaP-EDTA buffer and centrifugation at 13,000 rpm for 10 min (rotor FA-24×2, Eppendorf). This purification process was repeated two times ...
-
bioRxiv - Bioengineering 2022Quote: ... incubation for 20 min in room temperature and centrifugation at 20,238 x g for 10 min in a table-top centrifuge (Eppendorf 5424 ...
-
bioRxiv - Neuroscience 2023Quote: ... Blood was immediately mixed with 0.2 M EDTA to a final concentration of 10 mM and centrifuged at 5,000rpm (Eppendorf Centrifuge) for 10 minutes at 4°C ...
-
bioRxiv - Molecular Biology 2023Quote: ... dsRNA (∼10 μg/μl) was microinjected into the abdomen of the prepupae using a FemtoJet® 4i (Eppendorf, Germany), with the injected droplet size being comparable to the wasp’s compound eye ...
-
bioRxiv - Microbiology 2023Quote: ... The precipitated gDNA was pelleted by centrifugation (21,000 x g, 10 min at 4°C) in a tabletop centrifuge (Model 5424, Eppendorf). The supernatant was discarded by decantation ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The remaining 4.5 mL of each culture were spun down at 4000 rpm for 10 minutes (Centrifuge Eppendorf 5810R) and remaining supernatant was discarded by pipetting ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... Samples were centrifuged at 10,000 rpm at 4°C for 10 min and supernatants were dried under vacuum centrifugation (Eppendorf) overnight ...
-
bioRxiv - Microbiology 2023Quote: ... The parasite solution was pelleted at 1,200 g at 4°C for 10 min using a chilled large tabletop centrifuge (Eppendorf). The resulting pellet underwent 3 washes with intracellular buffer ...
-
bioRxiv - Microbiology 2024Quote: ... the homogenate was centrifuged at 2500 rpm for 10 minutes at 4°C using a benchtop centrifuge (Eppendorf, USA), and the supernatant was collected.
-
bioRxiv - Molecular Biology 2024Quote: ... Reactions were run in simplex at 1 and 10-fold dilutions on a Mastercycler® Nexus Gradient (Eppendorf, Germany). Optimised PCR Ta were compared to Ta=50°C as used by Ollivier et al ...
-
bioRxiv - Synthetic Biology 2024Quote: ... The flasks were placed inside an elevated CO2 (10%) shaker-incubator (New Brunswick S41i CO2 incubator shaker, Eppendorf, Germany) at 37°C ...
-
bioRxiv - Immunology 2019Quote: ... six cycles 94°C for 20 sec and a touchdown program of 15 cycles with successive annealing temperature decrement from 65°C to 60°C for 30 sec with 1°C decrement with a final extension at 72°C 10 min performed in a Mastercycler Gradient (Eppendorf). The products were monitored using 1.5 % agarose gel electrophoresis stained with ethidium bromide ...
-
bioRxiv - Bioengineering 2019Quote: ... EBs were harvest according to the manufacturer protocol and transferred to a 10 cm tissue culture dish (Eppendorf, catalog 0030702018). On Day 5 ...