Labshake search
Citations for Eppendorf :
251 - 300 of 393 citations for 7 CHLORO 4 HYDROXY 8 METHYLQUINOLINE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2023Quote: ... and tubes centrifuged at 4 °C for 2 min at 12000 x g in a refrigerated microfuge (Eppendorf 5415R). The upper phase was discarded ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... Samples were centrifuged at 10,000 rpm at 4°C for 10 min and supernatants were dried under vacuum centrifugation (Eppendorf) overnight ...
-
bioRxiv - Bioengineering 2023Quote: All centrifugation experiments were conducted in an Eppendorf 5702R centrifuge with a swing bucket rotor (Eppendorf, A-4-38) at 20°C ...
-
bioRxiv - Microbiology 2023Quote: ... The parasite solution was pelleted at 1,200 g at 4°C for 10 min using a chilled large tabletop centrifuge (Eppendorf). The resulting pellet underwent 3 washes with intracellular buffer ...
-
bioRxiv - Cell Biology 2023Quote: ... The incubated sample was centrifuged at 20,800 g for 15 min at 4 °C (Rotor F45-30-11, Eppendorf), and the resulting supernatant was analyzed by immunoblotting using various antibodies ...
-
bioRxiv - Cell Biology 2023Quote: ... fractions numbered from 9 to 22 were processed by centrifugation (20,800 g for 30 min at 4 °C, Rotor F45-30-11, Eppendorf), and the resulting pellet was further resuspended in 160 μL of alkaline carbonate buffer (100 mM Na2CO3 ...
-
bioRxiv - Biochemistry 2023Quote: ... Cells were washed in 20 mL of chilled phosphate-buffered saline (1X PBS, pH 7.4), and centrifuged (1500 ×g, 4 °C, 15 min) using the Centrifuge 5810R (Eppendorf). The cell pellet was subsequently resuspended in 30 mL of ice-cold RSB hypo buffer (10 mM NaCl ...
-
bioRxiv - Microbiology 2024Quote: ... the homogenate was centrifuged at 2500 rpm for 10 minutes at 4°C using a benchtop centrifuge (Eppendorf, USA), and the supernatant was collected.
-
bioRxiv - Cell Biology 2020Quote: ... we centrifuged the crude lysate at 500 g for 5 min at 4°C in a microfuge (Eppendorf, model 5424R) to remove cell debris ...
-
bioRxiv - Molecular Biology 2021Quote: ... 1 mM label was subsequently added and samples were incubated over night at 4°C and 350 rpm in a Thermomixer (Eppendorf). Excess label was removed by using a Sephadex G25 column (GE Healthcare Bio-Science AB ...
-
bioRxiv - Bioengineering 2022Quote: ... The lysates were clarified by centrifugation at 18,500g at 4 °C for 30 minutes using tabletop centrifuge (Eppendorf Centrifuge 5810R). Soluble protein was separated from cell debris and the supernatant was passed through 5 mL HisTrap columns (Cytiva ...
-
bioRxiv - Neuroscience 2021Quote: ... Single EGFP+ cells were sorted on a BD Influx equipped with a 140 µm nozzle and a cooling unit with a sample temperature of 4°C and collected into a DNA LoBind tube (Eppendorf) containing aCSF with 0.5% BSA ...
-
bioRxiv - Cell Biology 2022Quote: ... Absorbance was measured at 600 nm after every 12 h intervals till 4 to 5 days using a UV-visible spectrophotometer (Eppendorf).
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Microbiology 2019Quote: ... the vials were removed from the incubator and beads were spun down at 1200 rpm using a swinging-bucket A-4-81 rotor (Eppendorf). An aliquot of 10 µl of bead suspension was carefully sampled from the bottom of the vials ...
-
bioRxiv - Genomics 2021Quote: ... Nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Genetics 2020Quote: ... The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042, Eppendorf, Inc.) and the resultant supernatant fractions were stored at −80°C ...
-
bioRxiv - Genomics 2021Quote: ... nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Neuroscience 2020Quote: ... 180 μL aliquots of solubilized GlyT1 cell membrane were dispensed in a 4°C-cooled 96-well PCR plate (Eppendorf) in triplicates ...
-
bioRxiv - Microbiology 2021Quote: ... Cell harvest was performed outside the anaerobic chamber at 3700 rpm for 12 min (Centrifuge 5920R, S-4×1000, Eppendorf) at room temperature ...
-
bioRxiv - Microbiology 2021Quote: ... the cells were transferred into the anaerobic chamber and harvested for 12 min at 25°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf) outside of the anaerobic chamber ...
-
bioRxiv - Neuroscience 2019Quote: ... The lysate was cleared from the insoluble fraction by centrifugation for 15 min at 10,000 rpm (11,292 x g) at 4 °C (Eppendorf 5427 R). The supernatant was retrieved and the procedure repeated until no pellet was visible after centrifugation ...
-
bioRxiv - Biochemistry 2021Quote: ... The reactions were stopped by the addition of phosphoric acid and 4 µl of each reaction were spotted on P81 phosphocellulose papers (Whatman) using the epMotion 5070 (Eppendorf) workstation ...
-
bioRxiv - Cell Biology 2021Quote: ... was harvested by centrifugation at 300 × g for 5 min in a swing out 5804 S-4-72 rotor (Eppendorf). Baculovirus infected insect cell (BIIC ...
-
bioRxiv - Microbiology 2019Quote: ... PMNs were sedimented for 10 min with 1000 × g at 4°C on 45° fixed-angle rotor FA-45-30-11 (Eppendorf). The supernatant was filtered by gravity through sterile PVDF 5.0 µm Millex syringe filters (Merck-Millipore) ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Cell Biology 2021Quote: ... The resuspended cilia sample was centrifuged at 16,000g for 10 min at 4°C in a microfuge (Eppendorf, Centrifuge 5415D). The supernatant was discarded ...
-
bioRxiv - Synthetic Biology 2022Quote: The concentration and quality of the plasmid solutions were determined by diluting 1 ul of plasmid solution in 4 ul of Tris EDTA buffer and loading 3 ul of the diluted solution on a μCuvette G1 (Eppendorf). Optical densities were measured at 260 nm and 280 nm using a BioSpectrophotometer and Fluorimeter (Eppendorf) ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... The plasma was defrosted and then centrifuged at 2000 rpm (805 × g) for 4 min in a 5810 R centrifuge (Eppendorf) to remove possible particulate matter ...
-
bioRxiv - Immunology 2020Quote: ... The cultures were placed on ice for 10 minutes to slow growth then centrifuged at 3,000 × g for 10 minutes at 4°C (Eppendorf 5810R). The supernatants were discarded and the pellets were resuspended in fresh RPMI 10mM glucose until a McFarland of 5.0 (∼109 CFU/mL ...
-
bioRxiv - Systems Biology 2020Quote: ... A fixed volume of 100 μL cells was used to inoculate 50 mL preculture M9 +40 mM MOPS media with 4 g/L glucose which was grown overnight in a shake flask at 200 rpm in a 37°C (Eppendorf) incubator ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... Homogenates were centrifuged at 1000 rpm for 5 min at 4°C in a table centrifuge (5424 R, Eppendorf, Germany). The supernatant was transferred to a new tube and again centrifuged at 4°C for 5 min at 1400 rpm ...
-
bioRxiv - Neuroscience 2019Quote: ... Excised gel slices were incubated with 50% acetonitrile/50mM ammonium bicarbonate for 2 h at room temperature or 4°C overnight with gentle shaking at 600 rpm in a Thermomixer (Eppendorf), before being incubated in 100% acetonitrile for 15 min at room temperature ...
-
bioRxiv - Biophysics 2019Quote: ... The His-SUMO solubility tag was cleaved using His-tagged SUMO protease (from RGO) by incubating at 4°C overnight while gently rocking in protein lobind tubes (Eppendorf). The flow through of the second affinity step was collected and concentrated prior to loading onto a Superdex S200 (26/60 ...
-
bioRxiv - Bioengineering 2019Quote: ... the crude extracts were transferred into a fresh tube and centrifuged for 30 min at 15000g and 4 °C (Centrifuge 5427R, Eppendorf). The soluble supernatant (blue color ...
-
bioRxiv - Immunology 2020Quote: ... The isolated CD8+ T cells were then centrifuged at 400xg for 10 min (Eppendorf Centrifuge 5810R, rotor A-4-62) at room temperature ...
-
bioRxiv - Immunology 2020Quote: ... Peptides were eluted in 20 μL of 80% acetonitrile in 0.1% TFA and were concentrated to 4 μL (Concentrator 5301, Eppendorf AG). The peptides sample was then diluted to 5 μL by 0.1% TFA for LC-MS/MS analysis.
-
bioRxiv - Cell Biology 2022Quote: ... Sorted nuclei were then centrifuged at 1000 g for 15 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3), and supernatant was removed ...
-
bioRxiv - Microbiology 2022Quote: ... The cell suspension was then transferred into 2 mL tubes and centrifuged at 16 000g and 4°C (Eppendorf, Germany) to pellet the cells ...
-
bioRxiv - Neuroscience 2023Quote: ... Homogenates were centrifuged at 16,100 g for 20 min at 4 °C with an Eppendorf 5415R centrifuge (Eppendorf, Hamburg, Germany), sonicated for 10 s and protein amounts normalized following a bicinchoninic acid protein assay (ThermoFisher) ...
-
bioRxiv - Bioengineering 2023Quote: ... The resulting injection micropipette was backfilled with 5-10 μL of 500 μg/mL fluorescein solution and was mounted on the microinjection manipulator (InjectMan 4, Eppendorf) connected to a pneumatic microinjection pump (FemtoJet 4i ...
-
bioRxiv - Systems Biology 2023Quote: ... Homogenized islets were filtered with 30 µm filter (CellTrics, Sysmex) and pelleted with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 400 µL of sort buffer (1% fatty acid-free BSA ...
-
bioRxiv - Systems Biology 2023Quote: ... were added without disturbing the pellet and nuclei were pelleted with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). Supernatant was gently removed without disturbing the pellet and leaving ∼2-3 µl behind ...
-
bioRxiv - Systems Biology 2023Quote: ... and incubated on ice for 1 min before pelleting with a swinging-bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). Supernatant was gently removed and ∼50 µl were left behind to increase nuclei recovery ...
-
bioRxiv - Genomics 2022Quote: ... The beads were then incubated 1 h with the anti-Myc antibody (9E10) at 4°C (Eppendorf ThermoMixer, 1,300 rpm), washed three times in PBS/0.1 % BSA and two times in lysis buffer ...
-
bioRxiv - Neuroscience 2023Quote: ... The tubes were centrifuged at 3000 x g for 6 min at 4 °C and the conditioned media was transferred to a Protein LoBind tube (Eppendorf) (media fraction) ...
-
bioRxiv - Microbiology 2023Quote: ... The sample was vortexed for 30 seconds before being centrifuged for 15 mins at 4°C at 1739 x g (3000 rpm, Eppendorf 5810R benchtop centrifuge ...
-
bioRxiv - Biochemistry 2023Quote: ... The mixture was then incubated at 37 °C for 4 hrs under gentle orbital agitation (300 rpm on Eppendorf Thermomixer) and centrifuged at 15 000 × g for 5 min prior to SEC analysis ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: ... the samples were 10000xg centrifuged for 10 min in a cooled centrifuge (4°C; Centrifuge 5415 R, Eppendorf, Hamburg, Germany), and the supernatant transferred to new microcentrifuge tubes ...