Labshake search
Citations for Eppendorf :
251 - 300 of 429 citations for 4 4' Bi 7H benz de anthracene 7 7' dione since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2024Quote: ... The cells were collected by centrifugation at 4,000 rpm for 10 minutes at 4°C using S-4x universal rotor (Eppendorf). Cell pellets from the 200 mL culture were dissolved in cell suspension buffer (20 mM HEPES:KOH pH 7.5 ...
-
bioRxiv - Microbiology 2024Quote: ... The cells from a 25-mL culture were collected by centrifugation (4,000 rpm, 10 min, at 4°C in S-4x universal rotor (Eppendorf)) and resuspended in 0.5 mL of 3 M NaOAc pH4.5 supplemented with 10 mM EDTA ...
-
bioRxiv - Microbiology 2024Quote: ... The cells from 50 mL culture were collected by centrifugation (4,000 rpm, 10 min, at 4°C in S-4x universal rotor (Eppendorf)) ...
-
bioRxiv - Physiology 2024Quote: ... The next day we centrifuged tubes with methanol and tissue (4°C, 2000rpm) for fifteen minutes (Eppendorf centrifuge 5810R). We carefully pipetted the supernatant (∼ 5mL ...
-
bioRxiv - Neuroscience 2024Quote: Transgenic male and female flies were maintained under a dark condition for 4-6 days after eclosion and then transferred to a plastic tube (1.5 mL, Eppendorf) containing ∼200 µL of fly food ...
-
bioRxiv - Pathology 2024Quote: ... the bacterial suspension was subjected to centrifugation at 4000 rpm at 4 °C for 15 min (5804R, Eppendorf, Germany). The resulting pellet was rinsed with sterile distilled H2O and then reconstituted in an equivalent volume of sterile distilled H2O ...
-
bioRxiv - Microbiology 2024Quote: ... Debris was removed from sonicated lysates by centrifugation for 60 minutes at 4 °C and 14,000 × g in a 5910 R centrifuge (Eppendorf). The soluble lysate was then decanted and protein was purified using immobilized metal affinity chromatography ...
-
bioRxiv - Microbiology 2024Quote: ... followed by centrifugation at 21,130 x g at 4°C for 10 min in a tabletop chilled centrifuge (Eppendorf). 250 μl of the clarified lysate was transferred to a pre-chilled tube and mixed with 750 μl of TRIZOL LS (Sigma ...
-
bioRxiv - Microbiology 2024Quote: ... The resulting parasite solution was pelleted at 1,000 x g at 4°C for 8 min using a chilled large tabletop centrifuge (Eppendorf). The pellet obtained from two D150 plates underwent three washes with intracellular buffer before being resuspended in 200 μl of ice-cold polysome lysis buffer (20 mM Tris pH 8.0 ...
-
bioRxiv - Microbiology 2024Quote: ... The parasite solution was pelleted at 1,200 x g at 4°C for 10 min using a chilled large tabletop centrifuge (Eppendorf). The resulting pellet underwent 3 washes with intracellular buffer ...
-
bioRxiv - Physiology 2024Quote: ... plasma samples were thawed from storage at -80°C and centrifuged (5,000 x g, 10 minutes, 4 °C; Eppendorf 5427R with rotor FA-45-48-11 ...
-
bioRxiv - Biochemistry 2024Quote: ... 200 µL of K562 cell lysates (2.5 mg/mL) was added to the beads and incubated at 4 °C on thermomixer (5382000023, Eppendorf) at 1,000 rpm for 2 hours ...
-
bioRxiv - Zoology 2024Quote: ... kept overnight at -20°C then centrifuged at 12000 rpm for 15 mins at 4°C (Eppendorf 5810R, USA). The precipitate was allowed to be air-dried and dissolved in 1 ml of 1M Tris-HCl buffer (pH 6.8) ...
-
bioRxiv - Biochemistry 2024Quote: ... the cells were pelleted by centrifugation at 4,500xg for 10 min at 4 °C (High-Speed Centrifuge CR22N, Eppendorf). The supernatant was collected and doubly filtered (with a glass filter then with a PVDF filter) ...
-
bioRxiv - Biophysics 2024Quote: ... the protein was concentrated to 250μl using a 100kDa molecular weight cut-off filter (Amicon), centrifuged to pellet aggregates (10,000g, 10min, 4°C) (5418R, Eppendorf) and injected in a Superdex 200 10/300 gel filtration column (Cytiva ...
-
bioRxiv - Biochemistry 2024Quote: ... heat- denatured FCS matrix was a supernatant obtained after spinning (15,000 g, 15 minutes, 4 °C) 100% FCS (200 uL; 1.7 mL Eppendorf tubes) heated at 85°C for 15 minutes in a Thermomixer Comfort heating block (Eppendorf ...
-
bioRxiv - Genetics 2024Quote: ... equipped with a micromanipulator (MMO-220A and MN-4; Narishige, Tokyo, Japan) coupled to a FemtoJet express system (Eppendorf) with the following settings ...
-
bioRxiv - Biophysics 2024Quote: All work with EVs is performed utilizing Protein Lo-Bind Eppendorf tubes (Catalog No. 022431081, Eppendorf; DE), and Lo-Bind pipette tips (Corning DeckWorks ...
-
bioRxiv - Microbiology 2024Quote: ... a fraction of the spore suspension (2 mL, in 2 mL Eppendorf tubes (Eppendorf SE®, DE) was re-suspended in physiological water instead of Milli-Q® Water and stored at 4°C for one week ...
-
bioRxiv - Biochemistry 2024Quote: ... All measurements were made in the 300-600 nm range using a μCuvette G1.0 (Eppendorf, Hamburg, DE) with a 1 mm column length using 3 μL of each solution ...
-
bioRxiv - Cell Biology 2020Quote: ... we centrifuged the crude lysate at 500 g for 5 min at 4°C in a microfuge (Eppendorf, model 5424R) to remove cell debris ...
-
bioRxiv - Molecular Biology 2021Quote: ... 1 mM label was subsequently added and samples were incubated over night at 4°C and 350 rpm in a Thermomixer (Eppendorf). Excess label was removed by using a Sephadex G25 column (GE Healthcare Bio-Science AB ...
-
bioRxiv - Bioengineering 2022Quote: ... The lysates were clarified by centrifugation at 18,500g at 4 °C for 30 minutes using tabletop centrifuge (Eppendorf Centrifuge 5810R). Soluble protein was separated from cell debris and the supernatant was passed through 5 mL HisTrap columns (Cytiva ...
-
bioRxiv - Neuroscience 2021Quote: ... Single EGFP+ cells were sorted on a BD Influx equipped with a 140 µm nozzle and a cooling unit with a sample temperature of 4°C and collected into a DNA LoBind tube (Eppendorf) containing aCSF with 0.5% BSA ...
-
bioRxiv - Cell Biology 2022Quote: ... Absorbance was measured at 600 nm after every 12 h intervals till 4 to 5 days using a UV-visible spectrophotometer (Eppendorf).
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Genomics 2021Quote: ... Nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Genetics 2020Quote: ... The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042, Eppendorf, Inc.) and the resultant supernatant fractions were stored at −80°C ...
-
bioRxiv - Genomics 2021Quote: ... nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Neuroscience 2020Quote: ... 180 μL aliquots of solubilized GlyT1 cell membrane were dispensed in a 4°C-cooled 96-well PCR plate (Eppendorf) in triplicates ...
-
bioRxiv - Microbiology 2021Quote: ... Cell harvest was performed outside the anaerobic chamber at 3700 rpm for 12 min (Centrifuge 5920R, S-4×1000, Eppendorf) at room temperature ...
-
bioRxiv - Microbiology 2021Quote: ... the cells were transferred into the anaerobic chamber and harvested for 12 min at 25°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf) outside of the anaerobic chamber ...
-
bioRxiv - Biochemistry 2021Quote: ... The reactions were stopped by the addition of phosphoric acid and 4 µl of each reaction were spotted on P81 phosphocellulose papers (Whatman) using the epMotion 5070 (Eppendorf) workstation ...
-
bioRxiv - Cell Biology 2021Quote: ... was harvested by centrifugation at 300 × g for 5 min in a swing out 5804 S-4-72 rotor (Eppendorf). Baculovirus infected insect cell (BIIC ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Cell Biology 2021Quote: ... The resuspended cilia sample was centrifuged at 16,000g for 10 min at 4°C in a microfuge (Eppendorf, Centrifuge 5415D). The supernatant was discarded ...
-
bioRxiv - Synthetic Biology 2022Quote: The concentration and quality of the plasmid solutions were determined by diluting 1 ul of plasmid solution in 4 ul of Tris EDTA buffer and loading 3 ul of the diluted solution on a μCuvette G1 (Eppendorf). Optical densities were measured at 260 nm and 280 nm using a BioSpectrophotometer and Fluorimeter (Eppendorf) ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... The plasma was defrosted and then centrifuged at 2000 rpm (805 × g) for 4 min in a 5810 R centrifuge (Eppendorf) to remove possible particulate matter ...
-
bioRxiv - Immunology 2020Quote: ... The cultures were placed on ice for 10 minutes to slow growth then centrifuged at 3,000 × g for 10 minutes at 4°C (Eppendorf 5810R). The supernatants were discarded and the pellets were resuspended in fresh RPMI 10mM glucose until a McFarland of 5.0 (∼109 CFU/mL ...
-
bioRxiv - Systems Biology 2020Quote: ... A fixed volume of 100 μL cells was used to inoculate 50 mL preculture M9 +40 mM MOPS media with 4 g/L glucose which was grown overnight in a shake flask at 200 rpm in a 37°C (Eppendorf) incubator ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... Homogenates were centrifuged at 1000 rpm for 5 min at 4°C in a table centrifuge (5424 R, Eppendorf, Germany). The supernatant was transferred to a new tube and again centrifuged at 4°C for 5 min at 1400 rpm ...
-
bioRxiv - Immunology 2020Quote: ... The isolated CD8+ T cells were then centrifuged at 400xg for 10 min (Eppendorf Centrifuge 5810R, rotor A-4-62) at room temperature ...
-
bioRxiv - Immunology 2020Quote: ... Peptides were eluted in 20 μL of 80% acetonitrile in 0.1% TFA and were concentrated to 4 μL (Concentrator 5301, Eppendorf AG). The peptides sample was then diluted to 5 μL by 0.1% TFA for LC-MS/MS analysis.
-
bioRxiv - Cell Biology 2022Quote: ... Sorted nuclei were then centrifuged at 1000 g for 15 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3), and supernatant was removed ...
-
bioRxiv - Microbiology 2022Quote: ... The cell suspension was then transferred into 2 mL tubes and centrifuged at 16 000g and 4°C (Eppendorf, Germany) to pellet the cells ...
-
bioRxiv - Neuroscience 2023Quote: ... Homogenates were centrifuged at 16,100 g for 20 min at 4 °C with an Eppendorf 5415R centrifuge (Eppendorf, Hamburg, Germany), sonicated for 10 s and protein amounts normalized following a bicinchoninic acid protein assay (ThermoFisher) ...
-
bioRxiv - Neuroscience 2024Quote: ... samples were layered on top of the 105 µl cushion and spun at 10,000 g for 20 min at 4°C in a swing out rotor (A-8-11 swing bucket rotor, Eppendorf) to isolate CpxII bound to trans SNARE complexes (SNAREpins ...
-
bioRxiv - Molecular Biology 2024Quote: ... 1 mM D-L methionine) for 1 h at 4° C with shaking at 1400 rpm in a benchtop thermomixer 22331(Eppendorf). The beads were washed twice with binding buffer without soybean trypsin inhibitor and suspended in 50 % v/v binding buffer ...
-
bioRxiv - Molecular Biology 2024Quote: ... for 30 min-4 h at 76°C in a heat block (speed of 300 rpm; ThermoMixer F1.5, Eppendorf, Germany) (Wagner et al. ...