Labshake search
Citations for Eppendorf :
251 - 300 of 396 citations for 4 4 Methoxyphenoxy benzonitrile since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2021Quote: ... Single EGFP+ cells were sorted on a BD Influx equipped with a 140 µm nozzle and a cooling unit with a sample temperature of 4°C and collected into a DNA LoBind tube (Eppendorf) containing aCSF with 0.5% BSA ...
-
bioRxiv - Cell Biology 2022Quote: ... Absorbance was measured at 600 nm after every 12 h intervals till 4 to 5 days using a UV-visible spectrophotometer (Eppendorf).
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Genomics 2021Quote: ... Nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Genetics 2020Quote: ... The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042, Eppendorf, Inc.) and the resultant supernatant fractions were stored at −80°C ...
-
bioRxiv - Genomics 2021Quote: ... nuclei were rotated at 4 °C for 5 minutes before being pelleted again with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). After centrifugation ...
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Neuroscience 2020Quote: ... 180 μL aliquots of solubilized GlyT1 cell membrane were dispensed in a 4°C-cooled 96-well PCR plate (Eppendorf) in triplicates ...
-
bioRxiv - Microbiology 2021Quote: ... Cell harvest was performed outside the anaerobic chamber at 3700 rpm for 12 min (Centrifuge 5920R, S-4×1000, Eppendorf) at room temperature ...
-
bioRxiv - Microbiology 2021Quote: ... the cells were transferred into the anaerobic chamber and harvested for 12 min at 25°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf) outside of the anaerobic chamber ...
-
bioRxiv - Biochemistry 2021Quote: ... The reactions were stopped by the addition of phosphoric acid and 4 µl of each reaction were spotted on P81 phosphocellulose papers (Whatman) using the epMotion 5070 (Eppendorf) workstation ...
-
bioRxiv - Cell Biology 2021Quote: ... was harvested by centrifugation at 300 × g for 5 min in a swing out 5804 S-4-72 rotor (Eppendorf). Baculovirus infected insect cell (BIIC ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Cell Biology 2021Quote: ... The resuspended cilia sample was centrifuged at 16,000g for 10 min at 4°C in a microfuge (Eppendorf, Centrifuge 5415D). The supernatant was discarded ...
-
bioRxiv - Synthetic Biology 2022Quote: The concentration and quality of the plasmid solutions were determined by diluting 1 ul of plasmid solution in 4 ul of Tris EDTA buffer and loading 3 ul of the diluted solution on a μCuvette G1 (Eppendorf). Optical densities were measured at 260 nm and 280 nm using a BioSpectrophotometer and Fluorimeter (Eppendorf) ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... The plasma was defrosted and then centrifuged at 2000 rpm (805 × g) for 4 min in a 5810 R centrifuge (Eppendorf) to remove possible particulate matter ...
-
bioRxiv - Immunology 2020Quote: ... The cultures were placed on ice for 10 minutes to slow growth then centrifuged at 3,000 × g for 10 minutes at 4°C (Eppendorf 5810R). The supernatants were discarded and the pellets were resuspended in fresh RPMI 10mM glucose until a McFarland of 5.0 (∼109 CFU/mL ...
-
bioRxiv - Systems Biology 2020Quote: ... A fixed volume of 100 μL cells was used to inoculate 50 mL preculture M9 +40 mM MOPS media with 4 g/L glucose which was grown overnight in a shake flask at 200 rpm in a 37°C (Eppendorf) incubator ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... Homogenates were centrifuged at 1000 rpm for 5 min at 4°C in a table centrifuge (5424 R, Eppendorf, Germany). The supernatant was transferred to a new tube and again centrifuged at 4°C for 5 min at 1400 rpm ...
-
bioRxiv - Immunology 2020Quote: ... The isolated CD8+ T cells were then centrifuged at 400xg for 10 min (Eppendorf Centrifuge 5810R, rotor A-4-62) at room temperature ...
-
bioRxiv - Immunology 2020Quote: ... Peptides were eluted in 20 μL of 80% acetonitrile in 0.1% TFA and were concentrated to 4 μL (Concentrator 5301, Eppendorf AG). The peptides sample was then diluted to 5 μL by 0.1% TFA for LC-MS/MS analysis.
-
bioRxiv - Cell Biology 2022Quote: ... Sorted nuclei were then centrifuged at 1000 g for 15 min (Eppendorf, 5920R; 4°C, ramp speed of 3/3), and supernatant was removed ...
-
bioRxiv - Microbiology 2022Quote: ... The cell suspension was then transferred into 2 mL tubes and centrifuged at 16 000g and 4°C (Eppendorf, Germany) to pellet the cells ...
-
bioRxiv - Neuroscience 2023Quote: ... Homogenates were centrifuged at 16,100 g for 20 min at 4 °C with an Eppendorf 5415R centrifuge (Eppendorf, Hamburg, Germany), sonicated for 10 s and protein amounts normalized following a bicinchoninic acid protein assay (ThermoFisher) ...
-
bioRxiv - Neuroscience 2024Quote: ... samples were layered on top of the 105 µl cushion and spun at 10,000 g for 20 min at 4°C in a swing out rotor (A-8-11 swing bucket rotor, Eppendorf) to isolate CpxII bound to trans SNARE complexes (SNAREpins ...
-
bioRxiv - Molecular Biology 2024Quote: ... 1 mM D-L methionine) for 1 h at 4° C with shaking at 1400 rpm in a benchtop thermomixer 22331(Eppendorf). The beads were washed twice with binding buffer without soybean trypsin inhibitor and suspended in 50 % v/v binding buffer ...
-
bioRxiv - Molecular Biology 2024Quote: ... for 30 min-4 h at 76°C in a heat block (speed of 300 rpm; ThermoMixer F1.5, Eppendorf, Germany) (Wagner et al. ...
-
bioRxiv - Biochemistry 2024Quote: ... Cells were then pelleted by centrifugation at 3900 × g for 20 min (5810R centrifuge with S-4-104 rotor, Eppendorf) and stored at −20 °C.
-
bioRxiv - Synthetic Biology 2024Quote: ... + 90% air or 10% 12CO2 + 90% air generated by a DASGIP MX4/4 stand-alone gas-mixing module (Eppendorf, Germany). The flasks were placed in a 37°C shaker incubator ...
-
bioRxiv - Developmental Biology 2024Quote: ... and cells were sorted using a BD FACS Aria cell sorter at 4°C and collected in 0.4 mg/mL BSA in DNA LowBind tubes (Eppendorf, 0030108523). Cells were pelleted at 300 g for 5 minutes at 4°C and manually counted using a Bürker Chamber ...
-
bioRxiv - Evolutionary Biology 2024Quote: 15mL of a Salten solution (1011 PFU/mL) was distributed into 1.5mL polypropylene tubes and centrifuged for 1 hour at 16,000g at 4°C (Eppendorf Centrifuge 5415R). Pellets were resuspended in 100µL of 100 mM of ammonium acetate (NH4-CH3CO2 ...
-
bioRxiv - Cell Biology 2023Quote: ... is harvested by centrifugation at 300 × g for 5 min in a swing out 5804 S-4-72 rotor (Eppendorf). P1 virus was used to infect 50 ml of SF9 culture and P2 virus was harvested after 3-5 days through centrifugation and subsequent filtration through 0.45 μm PVDF membrane (Merck Millipore ...
-
bioRxiv - Bioengineering 2023Quote: ... The resulting injection micropipette was backfilled with 5-10 μL of 500 μg/mL fluorescein solution and was mounted on the microinjection manipulator (InjectMan 4, Eppendorf) connected to a pneumatic microinjection pump (FemtoJet 4i ...
-
bioRxiv - Systems Biology 2023Quote: ... Homogenized islets were filtered with 30 µm filter (CellTrics, Sysmex) and pelleted with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). Nuclei were resuspended in 400 µL of sort buffer (1% fatty acid-free BSA ...
-
bioRxiv - Systems Biology 2023Quote: ... were added without disturbing the pellet and nuclei were pelleted with a swinging bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). Supernatant was gently removed without disturbing the pellet and leaving ∼2-3 µl behind ...
-
bioRxiv - Systems Biology 2023Quote: ... and incubated on ice for 1 min before pelleting with a swinging-bucket centrifuge (500 x g, 5 min, 4°C; 5920R, Eppendorf). Supernatant was gently removed and ∼50 µl were left behind to increase nuclei recovery ...
-
bioRxiv - Genomics 2022Quote: ... The beads were then incubated 1 h with the anti-Myc antibody (9E10) at 4°C (Eppendorf ThermoMixer, 1,300 rpm), washed three times in PBS/0.1 % BSA and two times in lysis buffer ...
-
bioRxiv - Neuroscience 2023Quote: ... The tubes were centrifuged at 3000 x g for 6 min at 4 °C and the conditioned media was transferred to a Protein LoBind tube (Eppendorf) (media fraction) ...
-
bioRxiv - Microbiology 2023Quote: ... The sample was vortexed for 30 seconds before being centrifuged for 15 mins at 4°C at 1739 x g (3000 rpm, Eppendorf 5810R benchtop centrifuge ...
-
bioRxiv - Biochemistry 2023Quote: ... The mixture was then incubated at 37 °C for 4 hrs under gentle orbital agitation (300 rpm on Eppendorf Thermomixer) and centrifuged at 15 000 × g for 5 min prior to SEC analysis ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: ... the samples were 10000xg centrifuged for 10 min in a cooled centrifuge (4°C; Centrifuge 5415 R, Eppendorf, Hamburg, Germany), and the supernatant transferred to new microcentrifuge tubes ...
-
bioRxiv - Pathology 2023Quote: ... The samples were extracted overnight at 4℃ and then centrifuged at 4,000 rpm for 5 min at 4°C using a 5810 R fixed-angle rotor centrifuge (Eppendorf, Germany). 1 ml of the upper layer of petroleum ether was dried under vacuum in a new 2-ml tube ...
-
bioRxiv - Molecular Biology 2023Quote: ... After centrifugation for 10 min at 15,000 x g and 4 °C with a 5415R benchtop microcentrifuge (Eppendorf, Hamburg, Germany), the supernatants were collected and residual sample pellets were reextracted with a 200 μL aliquot of the previously used extraction solvent mixture ...
-
bioRxiv - Developmental Biology 2023Quote: ... About 6 pl dCas9-KRAB mRNA and sgRNA mixes were injected into cytoplasm of zygotes between 2-4 hpi using a Piezo impact-driven micromanipulator (Eppendorf). For all micro-injection experiments ...
-
bioRxiv - Cell Biology 2023Quote: ... followed by ϕ29 polymerase heat inactivation at 65°C for 20 min and cooling at 4°C using PCR thermocycler (Eppendorf). Amplified C-circle DNA was diluted with 2X SSC buffer and loaded onto a dot-blot apparatus bedded with Hybond N+ membrane (RPN2020B ...
-
bioRxiv - Cell Biology 2024Quote: ... the cell lysate was collected and agitated for 30 min at 800 rpm at 4 °C in a Thermomixer (Eppendorf). Afterwards ...
-
bioRxiv - Systems Biology 2024Quote: ... Samples were transferred to SMART Digest Trypsin digest resin in PCR strips and incubated 4 h at 70°C and 1400 rpm mixing (Thermomixer C with ThermoTop, Eppendorf). Cysteines were 1 ...
-
bioRxiv - Microbiology 2024Quote: ... was mixed with an equal volume of acidic phenol pH 4.3 and centrifugated (14,000 rpm for 20 minutes at 4°C in 5418 R Centrifuge equipped with FA-45-18-11 rotor (Eppendorf)) ...
-
bioRxiv - Microbiology 2024Quote: ... After centrifugation (14,000 rpm for 20 min at 4°C in 5418 R Centrifuge equipped with FA-45-18-11 rotor (Eppendorf)) ...
-
bioRxiv - Molecular Biology 2024Quote: ... After The upper lipophilic phases and lower hydrophilic phases were separated by high-speed centrifugation (12,700 rpm, 5 min at 4 °C, Centrifuge 5430R, Eppendorf, Germany). Next ...