Labshake search
Citations for Eppendorf :
101 - 150 of 1046 citations for 6 9 Methano 4 1 benzoxazepin 2 3H one octahydro 3 methyl 3 α 5a bta 6 bta 9 bta 9a bta 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genetics 2023Quote: ... Plates were sealed with Parafilm and incubated for 6 days at 20°C while shaking at 200 rpm (New Brunswick I26/I26R shaker, Eppendorf). On day six the plates were observed under a dissection microscope and the survival and reproduction phenotypes were assessed in each condition ...
-
bioRxiv - Microbiology 2024Quote: ... Sampling was performed at intervals of 6 to 14 hours and the OD600 was measured in 10 mm cuvettes using a BioSpectrometer (Eppendorf AG). Supernatants were centrifuged at 12,000 rpm (Thermo Scientific™ Fresco™ 21 Microcentrifuge ...
-
bioRxiv - Neuroscience 2020Quote: ... Microinjection of 300 nl was made over 3 min using a Femtojet injector (~5 psi, Eppendorf), and the exposed cortical surface was covered by a sterilized round cover glass (3 or 4 mm in diameter ...
-
bioRxiv - Biochemistry 2022Quote: ... 3 ml was aliquoted to each of the duplicate 5.0 mL tubes (Eppendorf Tubes®, Germany) while 50 μL was aliquoted to each of the duplicate 200 μL Polymerase Chain Reaction (PCR ...
-
bioRxiv - Plant Biology 2022Quote: ... Fermentation was conducted in approximately 3 L of culture in a bioreactor BioFlo120 (Eppendorf, Hamburg, Germany) at 30°C for 5 days ...
-
bioRxiv - Genetics 2022Quote: ... and spun at 100x g for 3 min in a swing-bucket centrifuge (e.g., Eppendorf 5804R). The cycling conditions are 95°C for 3 min ...
-
bioRxiv - Microbiology 2023Quote: ... the fermentation broth was centrifuged at 9000 r/min for 3 min (Eppendorf Centrifuge 5424, Germany), and the resultant pellet was collected for bacterial DNA extraction using the FastDNA® Spin Kit for Soil (MP Biomedicals ...
-
bioRxiv - Developmental Biology 2021Quote: ... 5.5 × 106 cells were suspended in 5.5 ml mTeSR1 per well of 6-well ultra-low attachment plates (Coring Costar) and cultured overnight in an orbital shaking CO2 incubator (Eppendorf New Brunswick) at 95 rpm ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The grown cultures were pelleted using a centrifuge (Eppendorf, 5804 R; 5000 RPM, 22°C, 3 min), washed and re-suspended in 0.8% sterile NaCl solution ...
-
bioRxiv - Microbiology 2022Quote: ... The tip of the remaining 3 swabs were broken off into a 1.5 ml tube (BioPur, Eppendorf) containing 0.3 ml sterile PBS to isolate microbiota.
-
bioRxiv - Microbiology 2020Quote: ... 20 mL of the enrichment was transferred to 5 L NMS medium in a 6-L fermenter controlled with a BioFlo® 120 Bioprocess Control Station (Eppendorf, Hamburg, Germany). Gas stream carrying a relatively low CH4 concentration (0.5% v/v in air ...
-
bioRxiv - Systems Biology 2023Quote: ... samples were pelleted at 6,010 x g for 3 minutes using a bench top centrifuge (Eppendorf 5424/5424R). 100% DMSO was added to resuspend the cell pellet with gentle pipetting until the pellet was completely broken down ...
-
bioRxiv - Molecular Biology 2023Quote: 10xGenomic single cell 3′ library was prepared as follows: single cells were sorted into 1.5 mL tubes (Eppendorf) and counted under the microscope ...
-
bioRxiv - Microbiology 2021Quote: ... with 100 μl aliquot of the ultra-low gelling temperature agarose gel solution (6% in Mueller Hinton Broth II, cation-adjusted) to 85 °C in a Thermomixer (Eppendorf Thermomixer R Shaker, Eppendorf). Once the temperature was reached ...
-
bioRxiv - Synthetic Biology 2020Quote: ... These reactions were incubated for 3 h at 30°C with 500 rpm shaking (Thermo Mixer C, Eppendorf, Germany). Post-incubation ...
-
bioRxiv - Cancer Biology 2021Quote: ... Proteins were eluted in 40 μL of 0.2 M glycine pH 3 for 30 min on a ThermoMixer (Eppendorf) at 900 rpm at room temperature ...
-
bioRxiv - Cell Biology 2020Quote: ... spun at 13,000 rpm for 3 min and the supernatant transferred to clean 1.5 ml tubes (Eppendorf, Hamburg, Germany). An equal volume of isopropanol (Sigma Aldrich ...
-
bioRxiv - Plant Biology 2023Quote: ... Bound phosphopeptides were then eluted 3 times with 100 µL ammonium hydroxide (5% v/v) into 1.5mL Lo-Bind tubes (Eppendorf). These were then frozen and lyophilized ...
-
bioRxiv - Molecular Biology 2023Quote: Additional primary chondrifying cell cultures were inoculated onto the surface of 30-mm round cover slips (3×30-μL droplets) (Menzel-Gläser, Menzel GmbH, Braunschweig, Germany) placed in 35-mm Petri dishes (Eppendorf). Hyaline cartilage-specific ECM production in cultures from days 0 to 15 was qualitatively analysed using metachromatic staining ...
-
bioRxiv - Molecular Biology 2023Quote: ... 30- μL droplets of the cell suspension were inoculated onto the surface of 30-mm round cover slips (3 × 30-μL droplets) (Menzel-Gläser) placed in 35-mm Petri dishes (Eppendorf). As described above ...
-
bioRxiv - Microbiology 2022Quote: Cells (2 ml cultures) were spun down (30 s Eppendorf centrifuge, 14,000 rpm, 4 °C), resuspended in 0.4 ml ice-cold growth medium and added to a screw cap Eppendorf tube containing 1.5 g glass beads (0.1 mm) ...
-
bioRxiv - Neuroscience 2019Quote: ... The DNA solution was then injected into the subretinal space for 3 seconds at 300 hPa using an automatic injector (Eppendorf). Two injections were performed in the following directions ...
-
bioRxiv - Microbiology 2021Quote: ... 0.5-1 mL culture sample was harvested by centrifugation for 3 min at 13806 rpm (Centrifuge 5424, FA-45-24-11, Eppendorf) and resuspended in 100-500 µL 10 mM NaOH depending on the size of the cell pellet ...
-
bioRxiv - Molecular Biology 2020Quote: ... one milliliter of NS1 recombinant protein (3 mg/ml in 2x PBS) was placed into a 1.5 ml Eppendorf tube (Eppendorf, Germany); and the tube mixed for 66 hours (55°C ...
-
bioRxiv - Developmental Biology 2022Quote: ... Approximately 30 mycn mutant or WT zebrafish embryos at 3 dpf were transferred to 1.5mL Low binding microcentrifuge tubes (Eppendorf 022431021). Trypsin-EDTA solution (Beyotime ...
-
bioRxiv - Microbiology 2021Quote: ... was performed with 0.5 µg of ligated DNA with oligonucleotides 6212 and 6420 in a standard PCR program with a 3 min extension time on a Mastercycler thermocycler (Eppendorf). Phusion DNA polymerase (NEB ...
-
bioRxiv - Biochemistry 2021Quote: ... In vitro translation reactions were carried out for the indicated proteins using rabbit reticulocyte lysate and SP cells at a final concentration of 3×106 cells/ml at 30°C for 40 min in a thermomixer (Eppendorf) set to 900 rpm ...
-
bioRxiv - Cancer Biology 2023Quote: ... Cells were transferred to a PCR-strip tube and heated for 3 min using a Mastercycler Nexus X2 thermal cycler (Eppendorf). After heating ...
-
bioRxiv - Molecular Biology 2023Quote: ... the rehydrated gel pieces were overlaid with 30 μL of 0.01% ProteaseMAX in 50 mM ammonium bicarbonate and incubated at 37°C for 3 hours with shaking at 800 rpm (Thermomixer, Eppendorf). The digestion reaction was transferred to a fresh tube ...
-
bioRxiv - Neuroscience 2023Quote: ... PFF oligomers were incubated with or without SVD-1a in PBS pH 7.4 for 3 d at 37 °C under quiescent condition in low retention Eppendorf tubes (Eppendorf, GE). Prior to injection ...
-
bioRxiv - Microbiology 2023Quote: ... The beads were pelleted (600 x g, 3 min) and the supernatant transferred to a fresh low protein binding tube (Eppendorf). The beads were washed with 1 x 200 µL HPLC-grade water and the washes combined with the original supernatant ...
-
bioRxiv - Physiology 2023Quote: ... for 1 h at 4 □ on a ThermoMixer C (Eppendorf), 350 µl of water and 250 µl of chloroform were added to the mixture to induce phase separation ...
-
bioRxiv - Bioengineering 2020Quote: The concentration of nitrogen in the media was monitored by taking 1 ml samples from the cultures at various time points and centrifuging them for 3 min at 16900 × g (benchtop 5430R centrifuge; Eppendorf, Germany). The supernatant was retained and the nitrogen concentration was determined using the method of Scheiner71 ...
-
bioRxiv - Microbiology 2021Quote: ... The cells were incubated with the dye and shaken for 20 minutes at room temperature in the dark, then washed by centrifugation (3 min, 8000 RPM, 28 °C (Eppendorf 5430R)) and resuspension in M2G three times ...
-
bioRxiv - Biochemistry 2023Quote: ... The eluted material was aliquoted into 3 samples in low binding polypropypene tubes (nominally 1.5 mL) and dried in a vacuum concentrator (Vacufuge® plus; Eppendorf™) at room temperature without additional heating for about 3h ...
-
bioRxiv - Microbiology 2023Quote: ... All microinjection procedures were carried out on 3 day post-fertilization embryos with the help of FemtoJet Microinjector and PatchMan NP2 Micromanipulator (Eppendorf, Germany). Embryos were divided into three groups-mock ...
-
bioRxiv - Cell Biology 2024Quote: ... with a 250 µm radius flat-bottom needle was mounted on a 3-D micromanipulator with 160 nm step size (Eppendorf, Inc) attached to a Leica inverted microscope ...
-
bioRxiv - Microbiology 2024Quote: Sample were retrotranscribed in cDNA using 1 µL of RNA with 1 µL of Reverse Transcription Master Mix and 3 µL of RNase-free ultrapure water provided with the kit (Standard Biotools, USA) using a thermal cycler (Eppendorf, Germany) with the following cycles ...
-
bioRxiv - Cell Biology 2021Quote: ... cells were recovered in 1 mL YPD (1% yeast extract, 2% Bacto peptone, 2% D-glucose) at 30°C in a ThermoMixer C (Eppendorf, Hamburg, Germany) for 3 hours (200 RPM ...
-
bioRxiv - Systems Biology 2022Quote: ... each SCN was cut into 3 pieces with a scalpel on a glass slide and transferred to a protein LoBind tube (Eppendorf, Hamburg, Germany) prefilled with 250 µL lysis buffer (100 mM Tris-HCl ...
-
bioRxiv - Microbiology 2022Quote: ... were also added to each tube and incubated at 37°C for 3 h in a thermomixer (Eppendorf Thermomixer C, Hamburg, Germany). After 3 h incubation ...
-
bioRxiv - Biophysics 2023Quote: ... and the device was left running for a minimum of 3 h while droplets were being collected in a 1.5 mL microcentrifuge tube (Eppendorf®, Hauppauge, NY).
-
bioRxiv - Developmental Biology 2023Quote: ... the gRNA:Cas9 ribonucleoprotein complex solution was incubated at 37°C for 5 min and then backfilled into 3 microinjection needles using an Eppendorf GELoader tip (Eppendorf, Cat# 022351656). After loading embryos into the embryo holder which covered with 12.5 ppt of salinity water with 0.0001% of methylene blue ...
-
bioRxiv - Biophysics 2023Quote: ... Cell growth was quantified at intervals by measuring their optical density at regular intervals (as mentioned in Figure 3) using a Biophotometer® D30 (Eppendorf, Germany). The morphology of cells at different growth stages was determined by a variety of microscopic techniques (as described in the below sections).
-
bioRxiv - Biochemistry 2019Quote: ... Dilutions (1:2) were performed using EP Motion (Eppendorf) and transferred to cells using the Tecan Freedom Evo ...
-
bioRxiv - Immunology 2019Quote: ... 1*106 T cells/condition were harvested 72h after α-CD3/α-CD28 activation and transferred to DNA Lo-binding Eppendorf tubes (Eppendorf). Cells were washed once with PBS and supernatant was completely removed ...
-
bioRxiv - Bioengineering 2019Quote: For extract preparation each 4 mL of cell cultures from tp 48h of HDC run 1 were spun down for 10 min at 4000 g and 4 °C (Centrifuge 5804R, Rotor A-4-44, Eppendorf). Pellets were resuspended in fresh 1 mL ‘thylakoid buffer’ (50 mM HEPES-NaOH ...
-
bioRxiv - Microbiology 2021Quote: ... and a volume corresponding to an OD600nm of one (109 cells) was pelleted at 14,000 x g for one minute (Eppendorf MiniSpin). 20 µl of supernatant was mixed with 50 µl BioLux Gaussia Luciferase Assay substrate (New England Biolabs ...
-
bioRxiv - Bioengineering 2020Quote: ... were centrifuged at 16,873 gav for 3 min in the FA-45-18-11 fixed angle (45°) rotor of an Eppendorf model 5418 centrifuge (Eppendorf AG, Hamburg, Germany). The pellets were resuspended in 1 mL of 2.5% (v/v ...
-
bioRxiv - Cell Biology 2020Quote: ... The homogenate was further incubated on ice for 45 min before centrifugation at 21,000 g and 4°C for 2 x 10 min in an Eppendorf 5424 R benchtop centrifuge (Eppendorf). Protein content of the lysate was determined by BCA assay (Thermo Fisher) ...