Labshake search
Citations for Eppendorf :
1101 - 1150 of 1234 citations for 7H Azeto 2 1 b 1 3 dioxino 4 5 e 1 3 oxazin 7 one hexahydro 2 6 dimethyl 2S 4aR 5aS 6S 9aR 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2023Quote: ... followed by ϕ29 polymerase heat inactivation at 65°C for 20 min and cooling at 4°C using PCR thermocycler (Eppendorf). Amplified C-circle DNA was diluted with 2X SSC buffer and loaded onto a dot-blot apparatus bedded with Hybond N+ membrane (RPN2020B ...
-
bioRxiv - Microbiology 2023Quote: ... The sample was vortexed for 30 seconds before being centrifuged for 15 mins at 4°C at 1739 x g (3000 rpm, Eppendorf 5810R benchtop centrifuge ...
-
bioRxiv - Biochemistry 2023Quote: ... The mixture was then incubated at 37 °C for 4 hrs under gentle orbital agitation (300 rpm on Eppendorf Thermomixer) and centrifuged at 15 000 × g for 5 min prior to SEC analysis ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: ... the samples were 10000xg centrifuged for 10 min in a cooled centrifuge (4°C; Centrifuge 5415 R, Eppendorf, Hamburg, Germany), and the supernatant transferred to new microcentrifuge tubes ...
-
bioRxiv - Molecular Biology 2023Quote: ... After centrifugation for 10 min at 15,000 x g and 4 °C with a 5415R benchtop microcentrifuge (Eppendorf, Hamburg, Germany), the supernatants were collected and residual sample pellets were reextracted with a 200 μL aliquot of the previously used extraction solvent mixture ...
-
bioRxiv - Biochemistry 2024Quote: ... Cells were then pelleted by centrifugation at 3900 × g for 20 min (5810R centrifuge with S-4-104 rotor, Eppendorf) and stored at −20 °C.
-
bioRxiv - Molecular Biology 2024Quote: ... for 30 min-4 h at 76°C in a heat block (speed of 300 rpm; ThermoMixer F1.5, Eppendorf, Germany) (Wagner et al. ...
-
bioRxiv - Neuroscience 2024Quote: ... samples were layered on top of the 105 µl cushion and spun at 10,000 g for 20 min at 4°C in a swing out rotor (A-8-11 swing bucket rotor, Eppendorf) to isolate CpxII bound to trans SNARE complexes (SNAREpins ...
-
bioRxiv - Synthetic Biology 2024Quote: ... + 90% air or 10% 12CO2 + 90% air generated by a DASGIP MX4/4 stand-alone gas-mixing module (Eppendorf, Germany). The flasks were placed in a 37°C shaker incubator ...
-
bioRxiv - Developmental Biology 2024Quote: ... and cells were sorted using a BD FACS Aria cell sorter at 4°C and collected in 0.4 mg/mL BSA in DNA LowBind tubes (Eppendorf, 0030108523). Cells were pelleted at 300 g for 5 minutes at 4°C and manually counted using a Bürker Chamber ...
-
bioRxiv - Genetics 2019Quote: ... Dry extracts were dissolved in 2 ml methanol and transferred to 4 ml glass vials prior of being concentrated to dryness in a speed vacuum (Speed Vac-Concentrator, Eppendorf, Hamburg) for 2 h at 28 °C ...
-
bioRxiv - Molecular Biology 2019Quote: ... To reduce non-specific binding of aggregates to the DNA beads, the HSS was centrifuged (14000 rpm, 10 min., 4°C) in a fixed angle microfuge (Eppendorf 5418). The HSS was then split into two 50 µL samples and the DNA-PKcs inhibitor NU-7441 (R&D Systems ...
-
bioRxiv - Microbiology 2021Quote: ... an aliquot of the culture was removed for CFU determination by plate counting and the remainder was centrifuged at 4°C and 3,100 rpm (Eppendorf Centrifuge 5415R) for 10 min to generate cell-free supernatants ...
-
bioRxiv - Neuroscience 2020Quote: ... 200 mM solution in water) was then added to the samples and incubated for 4 hours at 21°C in a ThermoMixer (Eppendorf AG). 4 µL of 1M IAA (iodoacetamide in water ...
-
bioRxiv - Cell Biology 2021Quote: ... The samples were incubated on ice for 30 min before the demembraned cilia were centrifuged at 16,000g for 10 min at 4°C in a microfuge (Eppendorf, Centrifuge 5415D). The supernatant was discarded ...
-
bioRxiv - Microbiology 2021Quote: ... Serum was separated from blood by centrifugation at 8,000 RPM for 30 minutes at 4 °C in an Eppendorf 5424R centrifuge (Eppendorf, Enfield, CT). Serum was heat inactivated by incubating at 56 °C for 30 minutes ...
-
bioRxiv - Biophysics 2020Quote: 96 well plates were coated with immunized vaccine antigen and incubated for two hours at 25 °C (4 μg/mL, in 1xPBS, 50 μL/well) under constant shaking (300 rpm) on a MixMate thermomixer (Eppendorf, USA). ACE2-hFc protein coating was used as a control for antigen immobilization ...
-
bioRxiv - Biophysics 2020Quote: 96 well plates were coated with vaccine antigen and incubated overnight at 25 °C (4 μg/mL in 1x PBS, 50 μl/well) under constant shaking (300 rpm) on a MixMate thermomixer (Eppendorf, USA). Ovalbumin (4 μg/mL in 1x PBS ...
-
bioRxiv - Systems Biology 2019Quote: ... and the bacterial cells were harvested by centrifugation (swing-out rotor A-4-44, Eppendorf; 3220 g, 8 min, 30°C). The cell pellet was resuspended in the mineral medium and centrifuged again ...
-
bioRxiv - Synthetic Biology 2020Quote: ... Solutions were then spun down at 13,000 RPM for 30 minutes at 4°C in a benchtop micro-centrifuge (Eppendorf Centrifuge 5424) to remove cells and other solid debris ...
-
bioRxiv - Neuroscience 2020Quote: ... Tubes were centrifuged at 14k rpm for 15 minutes at 4°C and the aqueous phase was collected into clean 1.5 mL Eppendorf tubes (Eppendorf, Hauppauge, NY). 500 µL of ice-cold isopropanol was added to each tube ...
-
bioRxiv - Microbiology 2020Quote: ... The cultures were grown in BHI broth for 24 h and were centrifuged at 3200 × g for 20 min at 4°C (Eppendorf, 5424R). The cell pellets were transported on ice for proteome analysis at The Mass Spectrometry Centre ...
-
bioRxiv - Bioengineering 2020Quote: ... Cotton swabs containing simulated forensic samples were placed in 500 μL of 1X PBS and mixed at 4°C in a Thermomixer (Eppendorf, Germany) set at 1,000 rpm for approximately an hour ...
-
bioRxiv - Neuroscience 2022Quote: ... 3 times with 10” ON and 30” OFF intervals on 20% power on ice and cleared by centrifugation at 21,000 rpm for 20min at 4°C (Eppendorf 5424R Centrifuge). 50µg of supernatant was mixed with NuPAGE LDS Sample Buffer (Thermo Scientific ...
-
bioRxiv - Neuroscience 2022Quote: ... Blood samples were collected on ice and centrifuged within 1h at 4°C for 10min at 3000 RPM (Eppendorf, Centrifuge 5804R). Separated plasma was stored at -80°C until the protein assay was initiated.
-
bioRxiv - Neuroscience 2022Quote: ... and incubated (gentle agitation, 20 minutes, 4°C) in EDTA solution (20 mM EDTA-PBS, Ca/Mg-free) in LoBind Protein tubes (Eppendorf 0030122216). The specimen was shaken ...
-
bioRxiv - Biophysics 2023Quote: ... Centrifugation was used to fractionate the cell lysate (at 4 °C for 30 min at 4,416 g, Eppendorf, Centrifuge 5804 R) and at 4 °C for 1 hour for ultracentrifugation (70,658 g ...
-
bioRxiv - Neuroscience 2023Quote: ... The cell culture supernatant was collected and pre-cleared from cells and larger particles by centrifugation at 400 × g at 4 °C for 10 min (Eppendorf 5810R) and 10,000 × g at 4 °C for 30 min (Eppendorf 5910R) ...
-
bioRxiv - Biophysics 2023Quote: ... Lysate and cell fragments were separated by centrifugation at 4 °C for 20 min at 12,000 rpm (Centrifuge 5418 R, Eppendorf, Hamburg, Germany). Protein concentrations in the supernatant were determined using the Pierce Micro BCA Protein Assay kit (Thermo Fisher Scientific ...
-
bioRxiv - Developmental Biology 2023Quote: The filled needle is positioned on a micromanipulator (Narishige MMO-4) and connected to a positive pressure pump (Eppendorf FemtoJet 4i). Control embryos were injected with Cas9 protein and Lap2b-GFP mRNA only.
-
bioRxiv - Biochemistry 2023Quote: ... in 5% glucose solution v/v prior to adding 2X solubilization buffer and incubation at 37 °C for 4 hrs under gentle orbital agitation (500 rpm on Eppendorf Thermomixer). The product was then analyzed by SEC as described earlier.
-
bioRxiv - Developmental Biology 2022Quote: ... The filled needle is positioned on a micromanipulator (Narishige MMO-4) and connected to a positive pressure pump (Eppendorf FemtoJet 4i). Embryos are placed in FHM drops covered with mineral oil under Leica TL Led microscope ...
-
bioRxiv - Biophysics 2023Quote: ... 4 µl ATP from the dilution series prepared for the master mix plate (Eppendorf tubes with maximum ATP conc. = 200 µM) were added to row A and row I on reaction stop plate ...
-
bioRxiv - Cell Biology 2023Quote: ... the resuspended cilia were centrifuged at 16000 × g for 10 minutes at 4°C in a microfuge (Eppendorf, Centrifuge 5415 D), and the supernatant was removed ...
-
bioRxiv - Microbiology 2024Quote: ... Cells grown under photoautotrophic and dark heterotrophic conditions were collected using centrifugation (6,000 rpm, 10 min, 4°C; R10A2 rotor, Himac CR21F, Eppendorf Himac Technologies) and washed with a small amount of PBS ...
-
bioRxiv - Microbiology 2019Quote: ... 100 mM NaCl for 5 days at 37°C with constant shaking at 500 rpm in a thermomixer (Eppendorf). The formation of amyloid filaments was followed by Thioflavin T (ThT ...
-
bioRxiv - Neuroscience 2019Quote: ... before gently spinning down the PR droplets at 4,000 rpm (3220 x g) for 5 min (Eppendorf 5810 R). Eppendorf tubes with phase separated samples were dispensed in 50 ml Falcon tubes and spun down in a swinging-bucket centrifuge ...
-
bioRxiv - Systems Biology 2021Quote: ... 5 ml of working volume was used in the batch culture at 37°C on a rotary shaker (Eppendorf). The pH of the growth medium was set to 7 ± 0.05.
-
bioRxiv - Genomics 2022Quote: ... Multiple 20µm tissue curls were cut per tissue and collected in pre-cooled 5 ml tubes (Eppendorf, Hamburg, Germany) ensuring no thawing while transferring and stored on dry ice until processing ...
-
bioRxiv - Immunology 2019Quote: 1000 cells of CD4+ cells were sorted directly into 5 ul of TCL buffer (Qiagene, Cat#1031576) in skirted Eppendorf 96-well twin.tec PCR plate (Eppendorf). Smart-seq2 modified from a published method [13] was carried out at Broad Technology Labs ...
-
bioRxiv - Cell Biology 2019Quote: ... Approximately 5– 10 nl of cell suspension was microinjected into the pericardial cavity of the embryo using CellTramVario (Eppendorf), Injectman Ni2 (Eppendorf ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells were kept at 37°C and 5% CO2 in a Galaxy 170 R humidified incubator (Eppendorf, Hamburg, Germany). All used cell lines were confirmed to be mycoplasma free by using MycoAlert Mycoplasma Detection Kit (Lonza).
-
bioRxiv - Genetics 2021Quote: ... A study pool quality control (SPQC) sample was prepared by combining 5 µL of supernatant from each sample into a 1.5 mL tube (Eppendorf). Stable Isotope Labeled (SIL ...
-
bioRxiv - Cell Biology 2021Quote: ... spun at 1,000 x g at −9°C for 5 minutes then aliquoted into lo-bind 2ml centrifuge tubes (Eppendorf) and snap frozen in liquid nitrogen ...
-
bioRxiv - Microbiology 2022Quote: Sheep or horse erythrocytes were washed three times with sterile PBS (pH=7.4) at 300⍰×⍰g for 5⍰min in a refrigerated centrifuge (Eppendorf). These washed erythrocytes suspension was lysed with 0.1% saponin and the concentration of oxy-hemoglobin in this preparation was determined using the QuantiChrom™ Hemoglobin Assay Kit (BioAssay Systems) ...
-
bioRxiv - Microbiology 2022Quote: ... supernatants containing planktonic bacteria were removed from cultures and bacteria were pelleted down by centrifugation at 13,000 rpm x 5 min in a refrigerated micro-centrifuge (Eppendorf). In another set of experiments ...
-
bioRxiv - Bioengineering 2023Quote: ... cerevisiae strain to 5 mL of YPD media and incubating in an orbital shaker incubator (Innova 42, Eppendorf, UK) at 30 °C and 250 rpm overnight ...
-
bioRxiv - Cell Biology 2023Quote: ... and kept at 37°C with 5% CO2 in an incubator (New Brunswick Galaxy 170 S, Eppendorf, Schönenbuch, Switzerland).
-
bioRxiv - Immunology 2022Quote: ... was added to the cells and they were incubated for 30 min at 4 °C and 750 RPM on a thermomixer (Eppendorf, ThermoMixer C). The liquid in the plate was removed using a vacuum manifold ...
-
bioRxiv - Immunology 2022Quote: ... was added to the cells and they were incubated for 45 min at 4 °C and 750 RPM on a thermomixer (Eppendorf, ThermoMixer C). The liquid in the plate was removed using a vacuum manifold ...