Labshake search
Citations for Eppendorf :
51 - 100 of 628 citations for 4 3 6 Dimethyl 3 heptyl phenol monoethoxylate ring 13C6 solution since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genetics 2022Quote: ... and spun at 100x g for 3 min in a swing-bucket centrifuge (e.g., Eppendorf 5804R). The cycling conditions are 95°C for 3 min ...
-
bioRxiv - Microbiology 2023Quote: ... the fermentation broth was centrifuged at 9000 r/min for 3 min (Eppendorf Centrifuge 5424, Germany), and the resultant pellet was collected for bacterial DNA extraction using the FastDNA® Spin Kit for Soil (MP Biomedicals ...
-
bioRxiv - Microbiology 2024Quote: ... and 22 h post-induction by centrifugation at 8,000 rpm for 3 min (Eppendorf 5417C centrifuge) and in 3 mL volumes 4 h post-induction by centrifugation at 7,197 x g for 5 min (Sorvall X4RF PRO-MD centrifuge) ...
-
bioRxiv - Bioengineering 2024Quote: ... Stained 3T3 suspension is washed with co-culture media 3 times using a centrifuge (5702, Eppendorf). 3T3 suspension is then added to the keratinocyte dish with a density of 1000 cells/mm^2 ...
-
bioRxiv - Microbiology 2021Quote: ... with 100 μl aliquot of the ultra-low gelling temperature agarose gel solution (6% in Mueller Hinton Broth II, cation-adjusted) to 85 °C in a Thermomixer (Eppendorf Thermomixer R Shaker, Eppendorf). Once the temperature was reached ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The grown cultures were pelleted using a centrifuge (Eppendorf, 5804 R; 5000 RPM, 22°C, 3 min), washed and re-suspended in 0.8% sterile NaCl solution ...
-
bioRxiv - Microbiology 2022Quote: ... The tip of the remaining 3 swabs were broken off into a 1.5 ml tube (BioPur, Eppendorf) containing 0.3 ml sterile PBS to isolate microbiota.
-
bioRxiv - Molecular Biology 2024Quote: ... and the resulting mixture was shaken for 3 h at 65 °C (Eppendorf ThermoMixer C, 1000 rpm). The reaction was quenched by addition of 0.05 M NaHCO3 in water (ca ...
-
bioRxiv - Genomics 2024Quote: ... This was modified to 3 minutes at 37°C with light shaking on a Thermomixer instrument (Eppendorf) at 450rpm ...
-
bioRxiv - Neuroscience 2020Quote: The homogenates were pelleted at 400xg for 6 minutes at 4°C in a swing-bucket rotor centrifuge (Eppendorf). The supernatants were removed and 1 ml ice-cold DPBS (pH 7.3-7.4 ...
-
bioRxiv - Neuroscience 2024Quote: Transgenic male and female flies were maintained under a dark condition for 4-6 days after eclosion and then transferred to a plastic tube (1.5 mL, Eppendorf) containing ∼200 µL of fly food ...
-
bioRxiv - Biochemistry 2020Quote: ... The rest of the solution was incubated at 4 °C for 1 h on a thermomixer (Eppendorf) set to 1000 rpm ...
-
bioRxiv - Systems Biology 2023Quote: ... samples were pelleted at 6,010 x g for 3 minutes using a bench top centrifuge (Eppendorf 5424/5424R). 100% DMSO was added to resuspend the cell pellet with gentle pipetting until the pellet was completely broken down ...
-
bioRxiv - Molecular Biology 2023Quote: 10xGenomic single cell 3′ library was prepared as follows: single cells were sorted into 1.5 mL tubes (Eppendorf) and counted under the microscope ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was then removed and nuclei were gently resuspended in 1.5 ml of HONDA buffer and split into 3 x 1.5 ml DNA LoBind tubes (Eppendorf). Samples were centrifugated at 2,000 g for 10 minutes to pellet nuclei and the supernatant was removed ...
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Neuroscience 2023Quote: ... The tubes were centrifuged at 3000 x g for 6 min at 4 °C and the conditioned media was transferred to a Protein LoBind tube (Eppendorf) (media fraction) ...
-
bioRxiv - Neuroscience 2020Quote: ... Solutions were exchanged by a low speed centrifuge step (4’ at 800 rpm in table top Eppendorf centrifuge) and aspiration ...
-
bioRxiv - Genomics 2023Quote: ... The DNA solution was pelleted by centrifugation at 6,000xg for 5 minutes at 4°C (Eppendorf Centrifuge 5425R). After removing the supernatant ...
-
bioRxiv - Synthetic Biology 2020Quote: ... These reactions were incubated for 3 h at 30°C with 500 rpm shaking (Thermo Mixer C, Eppendorf, Germany). Post-incubation ...
-
bioRxiv - Cancer Biology 2021Quote: ... Proteins were eluted in 40 μL of 0.2 M glycine pH 3 for 30 min on a ThermoMixer (Eppendorf) at 900 rpm at room temperature ...
-
bioRxiv - Cell Biology 2020Quote: ... spun at 13,000 rpm for 3 min and the supernatant transferred to clean 1.5 ml tubes (Eppendorf, Hamburg, Germany). An equal volume of isopropanol (Sigma Aldrich ...
-
bioRxiv - Plant Biology 2023Quote: ... Bound phosphopeptides were then eluted 3 times with 100 µL ammonium hydroxide (5% v/v) into 1.5mL Lo-Bind tubes (Eppendorf). These were then frozen and lyophilized ...
-
bioRxiv - Molecular Biology 2023Quote: Additional primary chondrifying cell cultures were inoculated onto the surface of 30-mm round cover slips (3×30-μL droplets) (Menzel-Gläser, Menzel GmbH, Braunschweig, Germany) placed in 35-mm Petri dishes (Eppendorf). Hyaline cartilage-specific ECM production in cultures from days 0 to 15 was qualitatively analysed using metachromatic staining ...
-
bioRxiv - Molecular Biology 2023Quote: ... 30- μL droplets of the cell suspension were inoculated onto the surface of 30-mm round cover slips (3 × 30-μL droplets) (Menzel-Gläser) placed in 35-mm Petri dishes (Eppendorf). As described above ...
-
bioRxiv - Molecular Biology 2023Quote: ... The mixture was sonicated 3 times for 1 minute in a waterbath sonicator and incubated in a ThermoMixer (Eppendorf) for 30 minutes at 37°C and 500 rpm ...
-
bioRxiv - Synthetic Biology 2024Quote: ... with TaqMan® Gene Expression Assay and run using the QuantStudio™ 3 Real-Time PCR System (Eppendorf, A28137) at standard curve mode ...
-
bioRxiv - Plant Biology 2024Quote: ... was added to each tube and incubated at 50 °C at 850 rpm for 3 hours using a Thermomixer F2.0 (Eppendorf). A total of 150 µL of each sample was then transferred to vials in preparation for injection in the GC-MS ...
-
bioRxiv - Genomics 2024Quote: ... Deyolked embryos were pelleted at 400g for 3 minutes using a swinging-bucket centrifuge (Eppendorf 5430R with swinging buckets). Supernatant was discarded by aspiration and the pellet was washed and resuspended with 500 µL of PBS + 10% FBS before being spun down again ...
-
bioRxiv - Developmental Biology 2024Quote: ... and 0.003% Tricaine (ethyl-3-aminobenzoate-methanesulfonate) for 60 min at 31 °C in a Thermomixer (Eppendorf, Thermomixer R) set to 100 rpm ...
-
A DNA-based optical nanosensor for in vivo imaging of acetylcholine in the peripheral nervous systembioRxiv - Bioengineering 2020Quote: The DNA scaffold was self-assembled by incubating 5 DNA oligonucleotides following a temperature gradient from 95 °C to 4 °C for 6 h in a thermocycler (Mastercycler® nexus X2, Eppendorf) in Tris-EDTA buffer (TE buffer ...
-
bioRxiv - Biochemistry 2022Quote: ... The rest of the solution was incubated at 4°C for 1 hour on a thermomixer (Eppendorf, Hamburg, Germany) set to 1000 rpm ...
-
bioRxiv - Microbiology 2021Quote: ... 0.5-1 mL culture sample was harvested by centrifugation for 3 min at 13806 rpm (Centrifuge 5424, FA-45-24-11, Eppendorf) and resuspended in 100-500 µL 10 mM NaOH depending on the size of the cell pellet ...
-
bioRxiv - Microbiology 2021Quote: ... pelleted by centrifugation (300 rcf, 3 min, RT in 50-mL conical tubes; then 21,000 rcf, 2 min, RT in Eppendorf tubes), and stored at -80 °C ...
-
bioRxiv - Microbiology 2021Quote: ... pelleted by centrifugation (300 rcf, 3 min, RT in 15-mL conical tubes; then 21,000 rcf, 2 min, RT in Eppendorf tubes), and stored at -80 °C until further analysis ...
-
bioRxiv - Microbiology 2021Quote: ... pelleted by centrifugation (300 rcf, 3 min, RT in 50-mL conical tubes; then 21,000 rcf, 2 min, RT in Eppendorf tubes), and sonicated in chilled PBS (1 s on ...
-
bioRxiv - Molecular Biology 2020Quote: ... one milliliter of NS1 recombinant protein (3 mg/ml in 2x PBS) was placed into a 1.5 ml Eppendorf tube (Eppendorf, Germany); and the tube mixed for 66 hours (55°C ...
-
bioRxiv - Biophysics 2022Quote: ... the DNA droplet-containing aqueous phase was layered on top of the oil phase in a volumetric ratio of 1:3 within a microtube (Eppendorf). For the segregation of DNA droplets using enzymatic activity ...
-
bioRxiv - Biophysics 2022Quote: ... The aqueous solution was layered on top of the oil-surfactant mix in a volumetric ratio of 1:3 inside a microtube (Eppendorf). The tube was manually shaken for about 30 s until water-in-oil droplets formed ...
-
bioRxiv - Developmental Biology 2022Quote: ... Approximately 30 mycn mutant or WT zebrafish embryos at 3 dpf were transferred to 1.5mL Low binding microcentrifuge tubes (Eppendorf 022431021). Trypsin-EDTA solution (Beyotime ...
-
bioRxiv - Microbiology 2021Quote: ... was performed with 0.5 µg of ligated DNA with oligonucleotides 6212 and 6420 in a standard PCR program with a 3 min extension time on a Mastercycler thermocycler (Eppendorf). Phusion DNA polymerase (NEB ...
-
bioRxiv - Biochemistry 2021Quote: ... In vitro translation reactions were carried out for the indicated proteins using rabbit reticulocyte lysate and SP cells at a final concentration of 3×106 cells/ml at 30°C for 40 min in a thermomixer (Eppendorf) set to 900 rpm ...
-
bioRxiv - Biophysics 2020Quote: ... the DNA-containing aqueous phase was layered on top of the oil phase in a volumetric ratio of 1:3 within a microtube (Eppendorf). Droplet formation was induced by manual shaking for about 4 s as described earlier.[26] For the oil-phase ...
-
bioRxiv - Physiology 2020Quote: ... with 3 mM Tris(2-carboxyethyl)phosphine hydrochloride(TCEP-HCl) (Thermo Pierce) while shaking at 600 rpm in a thermomixer (Eppendorf). Samples were alkylated with 9 mM iodoacetamide (22 °C ...
-
bioRxiv - Genomics 2024Quote: ... and washed in nuclease-free H2O before proceeding to MNase digestion with 1-2U of MNase for 3×106 cells that went on for 1-hour at 37C while shaking in a thermomixer (Eppendorf) at 550rcf ...
-
bioRxiv - Cancer Biology 2023Quote: ... Cells were transferred to a PCR-strip tube and heated for 3 min using a Mastercycler Nexus X2 thermal cycler (Eppendorf). After heating ...
-
bioRxiv - Molecular Biology 2023Quote: ... the rehydrated gel pieces were overlaid with 30 μL of 0.01% ProteaseMAX in 50 mM ammonium bicarbonate and incubated at 37°C for 3 hours with shaking at 800 rpm (Thermomixer, Eppendorf). The digestion reaction was transferred to a fresh tube ...
-
bioRxiv - Neuroscience 2023Quote: ... PFF oligomers were incubated with or without SVD-1a in PBS pH 7.4 for 3 d at 37 °C under quiescent condition in low retention Eppendorf tubes (Eppendorf, GE). Prior to injection ...
-
bioRxiv - Microbiology 2023Quote: ... The beads were pelleted (600 x g, 3 min) and the supernatant transferred to a fresh low protein binding tube (Eppendorf). The beads were washed with 1 x 200 µL HPLC-grade water and the washes combined with the original supernatant ...