Labshake search
Citations for Eppendorf :
51 - 100 of 125 citations for 3 Trifluoromethylthio benzeneboronic acid since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2021Quote: ... cell cultures were collected by centrifugation at 3,300 rpm for 3 min at 4°C (using Eppendorf centrifuge 5810R equipped with the A-4-62 rotor ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The grown cultures were pelleted using a centrifuge (Eppendorf, 5804 R; 5000 RPM, 22°C, 3 min), washed and re-suspended in 0.8% sterile NaCl solution ...
-
bioRxiv - Cell Biology 2023Quote: ... the expelled homogenate was palleted by centrifugation for 3 min (at 300 g at 4°C) (Eppendorf). The pellet was discarded ...
-
bioRxiv - Microbiology 2022Quote: ... The tip of the remaining 3 swabs were broken off into a 1.5 ml tube (BioPur, Eppendorf) containing 0.3 ml sterile PBS to isolate microbiota.
-
bioRxiv - Molecular Biology 2024Quote: ... and the resulting mixture was shaken for 3 h at 65 °C (Eppendorf ThermoMixer C, 1000 rpm). The reaction was quenched by addition of 0.05 M NaHCO3 in water (ca ...
-
bioRxiv - Genomics 2024Quote: ... This was modified to 3 minutes at 37°C with light shaking on a Thermomixer instrument (Eppendorf) at 450rpm ...
-
bioRxiv - Microbiology 2020Quote: ... we pelleted 6 mL of culture for 3 min at 7000 rpm (Benchtop centrifuge 5424 Eppendorf, Hamburg, Germany) inside a glove-box (MBraun ...
-
bioRxiv - Systems Biology 2023Quote: ... samples were pelleted at 6,010 x g for 3 minutes using a bench top centrifuge (Eppendorf 5424/5424R). 100% DMSO was added to resuspend the cell pellet with gentle pipetting until the pellet was completely broken down ...
-
bioRxiv - Molecular Biology 2023Quote: ... Yeast were centrifuged at 3,000 rpm for 3 min in an A-4-62 swing bucket rotor (Eppendorf) and resuspended in 20 ml 1 M sorbitol and incubated at 4 °C overnight (<18 h) ...
-
bioRxiv - Molecular Biology 2023Quote: 10xGenomic single cell 3′ library was prepared as follows: single cells were sorted into 1.5 mL tubes (Eppendorf) and counted under the microscope ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was then removed and nuclei were gently resuspended in 1.5 ml of HONDA buffer and split into 3 x 1.5 ml DNA LoBind tubes (Eppendorf). Samples were centrifugated at 2,000 g for 10 minutes to pellet nuclei and the supernatant was removed ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Samples were then extracted for 3 hr at 4°C in a ThermoMixer (Eppendorf US, Enfield, CT, USA), followed by evaporation of the methanol component with a speedvac concentrator (Thermo Fisher Scientific ...
-
bioRxiv - Synthetic Biology 2020Quote: ... These reactions were incubated for 3 h at 30°C with 500 rpm shaking (Thermo Mixer C, Eppendorf, Germany). Post-incubation ...
-
bioRxiv - Cancer Biology 2021Quote: ... Proteins were eluted in 40 μL of 0.2 M glycine pH 3 for 30 min on a ThermoMixer (Eppendorf) at 900 rpm at room temperature ...
-
bioRxiv - Cell Biology 2020Quote: ... spun at 13,000 rpm for 3 min and the supernatant transferred to clean 1.5 ml tubes (Eppendorf, Hamburg, Germany). An equal volume of isopropanol (Sigma Aldrich ...
-
bioRxiv - Plant Biology 2023Quote: ... Bound phosphopeptides were then eluted 3 times with 100 µL ammonium hydroxide (5% v/v) into 1.5mL Lo-Bind tubes (Eppendorf). These were then frozen and lyophilized ...
-
bioRxiv - Molecular Biology 2023Quote: ... The mixture was sonicated 3 times for 1 minute in a waterbath sonicator and incubated in a ThermoMixer (Eppendorf) for 30 minutes at 37°C and 500 rpm ...
-
bioRxiv - Molecular Biology 2023Quote: Additional primary chondrifying cell cultures were inoculated onto the surface of 30-mm round cover slips (3×30-μL droplets) (Menzel-Gläser, Menzel GmbH, Braunschweig, Germany) placed in 35-mm Petri dishes (Eppendorf). Hyaline cartilage-specific ECM production in cultures from days 0 to 15 was qualitatively analysed using metachromatic staining ...
-
bioRxiv - Molecular Biology 2023Quote: ... 30- μL droplets of the cell suspension were inoculated onto the surface of 30-mm round cover slips (3 × 30-μL droplets) (Menzel-Gläser) placed in 35-mm Petri dishes (Eppendorf). As described above ...
-
bioRxiv - Synthetic Biology 2024Quote: ... with TaqMan® Gene Expression Assay and run using the QuantStudio™ 3 Real-Time PCR System (Eppendorf, A28137) at standard curve mode ...
-
bioRxiv - Plant Biology 2024Quote: ... was added to each tube and incubated at 50 °C at 850 rpm for 3 hours using a Thermomixer F2.0 (Eppendorf). A total of 150 µL of each sample was then transferred to vials in preparation for injection in the GC-MS ...
-
bioRxiv - Genomics 2024Quote: ... Deyolked embryos were pelleted at 400g for 3 minutes using a swinging-bucket centrifuge (Eppendorf 5430R with swinging buckets). Supernatant was discarded by aspiration and the pellet was washed and resuspended with 500 µL of PBS + 10% FBS before being spun down again ...
-
bioRxiv - Developmental Biology 2024Quote: ... and 0.003% Tricaine (ethyl-3-aminobenzoate-methanesulfonate) for 60 min at 31 °C in a Thermomixer (Eppendorf, Thermomixer R) set to 100 rpm ...
-
bioRxiv - Microbiology 2021Quote: ... 0.5-1 mL culture sample was harvested by centrifugation for 3 min at 13806 rpm (Centrifuge 5424, FA-45-24-11, Eppendorf) and resuspended in 100-500 µL 10 mM NaOH depending on the size of the cell pellet ...
-
bioRxiv - Microbiology 2021Quote: ... pelleted by centrifugation (300 rcf, 3 min, RT in 50-mL conical tubes; then 21,000 rcf, 2 min, RT in Eppendorf tubes), and stored at -80 °C ...
-
bioRxiv - Microbiology 2021Quote: ... pelleted by centrifugation (300 rcf, 3 min, RT in 15-mL conical tubes; then 21,000 rcf, 2 min, RT in Eppendorf tubes), and stored at -80 °C until further analysis ...
-
bioRxiv - Microbiology 2021Quote: ... pelleted by centrifugation (300 rcf, 3 min, RT in 50-mL conical tubes; then 21,000 rcf, 2 min, RT in Eppendorf tubes), and sonicated in chilled PBS (1 s on ...
-
bioRxiv - Molecular Biology 2020Quote: ... one milliliter of NS1 recombinant protein (3 mg/ml in 2x PBS) was placed into a 1.5 ml Eppendorf tube (Eppendorf, Germany); and the tube mixed for 66 hours (55°C ...
-
bioRxiv - Cell Biology 2021Quote: ... were vortexed 3 min at room temperature followed by centrifugation at 4,500 x g for 5 min at 4°C (Eppendorf #5010R). The supernatant fluid was poured into a chilled 2 ml screw-capped tube ...
-
bioRxiv - Biophysics 2022Quote: ... the DNA droplet-containing aqueous phase was layered on top of the oil phase in a volumetric ratio of 1:3 within a microtube (Eppendorf). For the segregation of DNA droplets using enzymatic activity ...
-
bioRxiv - Synthetic Biology 2022Quote: The concentration and quality of the plasmid solutions were determined by diluting 1 ul of plasmid solution in 4 ul of Tris EDTA buffer and loading 3 ul of the diluted solution on a μCuvette G1 (Eppendorf). Optical densities were measured at 260 nm and 280 nm using a BioSpectrophotometer and Fluorimeter (Eppendorf) ...
-
bioRxiv - Biophysics 2022Quote: ... The aqueous solution was layered on top of the oil-surfactant mix in a volumetric ratio of 1:3 inside a microtube (Eppendorf). The tube was manually shaken for about 30 s until water-in-oil droplets formed ...
-
bioRxiv - Developmental Biology 2022Quote: ... Approximately 30 mycn mutant or WT zebrafish embryos at 3 dpf were transferred to 1.5mL Low binding microcentrifuge tubes (Eppendorf 022431021). Trypsin-EDTA solution (Beyotime ...
-
bioRxiv - Microbiology 2021Quote: ... was performed with 0.5 µg of ligated DNA with oligonucleotides 6212 and 6420 in a standard PCR program with a 3 min extension time on a Mastercycler thermocycler (Eppendorf). Phusion DNA polymerase (NEB ...
-
bioRxiv - Biochemistry 2021Quote: ... In vitro translation reactions were carried out for the indicated proteins using rabbit reticulocyte lysate and SP cells at a final concentration of 3×106 cells/ml at 30°C for 40 min in a thermomixer (Eppendorf) set to 900 rpm ...
-
bioRxiv - Biophysics 2020Quote: ... the DNA-containing aqueous phase was layered on top of the oil phase in a volumetric ratio of 1:3 within a microtube (Eppendorf). Droplet formation was induced by manual shaking for about 4 s as described earlier.[26] For the oil-phase ...
-
bioRxiv - Physiology 2020Quote: ... with 3 mM Tris(2-carboxyethyl)phosphine hydrochloride(TCEP-HCl) (Thermo Pierce) while shaking at 600 rpm in a thermomixer (Eppendorf). Samples were alkylated with 9 mM iodoacetamide (22 °C ...
-
bioRxiv - Cancer Biology 2023Quote: ... Cells were transferred to a PCR-strip tube and heated for 3 min using a Mastercycler Nexus X2 thermal cycler (Eppendorf). After heating ...
-
bioRxiv - Genomics 2024Quote: ... and washed in nuclease-free H2O before proceeding to MNase digestion with 1-2U of MNase for 3×106 cells that went on for 1-hour at 37C while shaking in a thermomixer (Eppendorf) at 550rcf ...
-
bioRxiv - Microbiology 2023Quote: ... The beads were pelleted (600 x g, 3 min) and the supernatant transferred to a fresh low protein binding tube (Eppendorf). The beads were washed with 1 x 200 µL HPLC-grade water and the washes combined with the original supernatant ...
-
bioRxiv - Molecular Biology 2023Quote: ... the rehydrated gel pieces were overlaid with 30 μL of 0.01% ProteaseMAX in 50 mM ammonium bicarbonate and incubated at 37°C for 3 hours with shaking at 800 rpm (Thermomixer, Eppendorf). The digestion reaction was transferred to a fresh tube ...
-
bioRxiv - Neuroscience 2023Quote: ... PFF oligomers were incubated with or without SVD-1a in PBS pH 7.4 for 3 d at 37 °C under quiescent condition in low retention Eppendorf tubes (Eppendorf, GE). Prior to injection ...
-
bioRxiv - Bioengineering 2020Quote: The concentration of nitrogen in the media was monitored by taking 1 ml samples from the cultures at various time points and centrifuging them for 3 min at 16900 × g (benchtop 5430R centrifuge; Eppendorf, Germany). The supernatant was retained and the nitrogen concentration was determined using the method of Scheiner71 ...
-
bioRxiv - Microbiology 2021Quote: ... The cells were incubated with the dye and shaken for 20 minutes at room temperature in the dark, then washed by centrifugation (3 min, 8000 RPM, 28 °C (Eppendorf 5430R)) and resuspension in M2G three times ...
-
bioRxiv - Genetics 2024Quote: ... the samples were washed 3 times with 500 μl Perm wash (centrifugation for 2 minutes at 1600 rpm (Eppendorf centrifuge 5415R)) ...
-
bioRxiv - Microbiology 2024Quote: Sample were retrotranscribed in cDNA using 1 µL of RNA with 1 µL of Reverse Transcription Master Mix and 3 µL of RNase-free ultrapure water provided with the kit (Standard Biotools, USA) using a thermal cycler (Eppendorf, Germany) with the following cycles ...
-
bioRxiv - Microbiology 2023Quote: ... All microinjection procedures were carried out on 3 day post-fertilization embryos with the help of FemtoJet Microinjector and PatchMan NP2 Micromanipulator (Eppendorf, Germany). Embryos were divided into three groups-mock ...
-
bioRxiv - Biochemistry 2023Quote: ... The eluted material was aliquoted into 3 samples in low binding polypropypene tubes (nominally 1.5 mL) and dried in a vacuum concentrator (Vacufuge® plus; Eppendorf™) at room temperature without additional heating for about 3h ...
-
bioRxiv - Cancer Biology 2022Quote: ... Samples were vigorously vortex-mixed for 3 min and centrifuged at 14,000 rpm for 10 min at 4 °C (Eppendorf 5804 R). The clear supernatant was then transferred to a separate vial ...
-
bioRxiv - Plant Biology 2022Quote: ... annealing at 51 °C for 30 s and extension 72 °C for 30 s for 25 cycles by final extension 72 °C for 3 min and reaction hold at 4 °C in a thermocycler (Gradient thermocycler® Eppendorf). Amplified gene products were sequenced using the Sanger sequencing method ...