Labshake search
Citations for Eppendorf :
851 - 900 of 933 citations for Octreotide acetate impurity C since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Synthetic Biology 2022Quote: ... The fluorocarbon/ethanol mix was shaken at room temperature for 16 h with 1000 rpm using an Eppendorf ThermoMixer C (Eppendorf AG, Germany) to perform the liquid-liquid extraction ...
-
bioRxiv - Systems Biology 2022Quote: ... Peptides were eluted with 60 μl of elution buffer (80% acetonitrile/1% ammonia) and dried at 60°C using a SpeedVac centrifuge (Eppendorf, Concentrator plus). Dried peptides were redissolved and sonicated in 5% acetonitrile/0.1% TFA ...
-
bioRxiv - Biophysics 2022Quote: ... pH 7.4) with and without 1,4 dithiothreitol (DTT) (10 mM) and agitated at 400 oscillations per minute (Eppendorf Thermomixer C, Eppendorf, Germany) for 48 h.
-
bioRxiv - Plant Biology 2021Quote: ... 0.1 M NaHCO3) by incubating at 65°C for 15 min at 1200 rpm in a ThermoMixer Comfort (Eppendorf AG, Hamburg, Germany). NaCl was added to the eluates and the input DNA aliquots to a final concentration of 0.2 M ...
-
bioRxiv - Cancer Biology 2020Quote: ... sonicated for 15 min and vigorously mixed at 5°C for 30 min with 2000 rpm on a ThermoMixer (Eppendorf, Hamburg, Germany). Samples were centrifuged for 5 min at 18000 rpm ...
-
bioRxiv - Microbiology 2022Quote: ... 4.6×106 LMBs or NMBs were added and samples incubated at 37 °C for 1 hour on a thermomixer (60 rpm; Eppendorf, Hamburg, Germany). After this step ...
-
bioRxiv - Developmental Biology 2022Quote: ... containing 50 pmols of each primer set (up to two channels per experiment) and 10% formamide] 16-48 hrs at 37°C mixing at 400 rpm in a thermomixer (Eppendorf ThermoMixer F1.5). Embryos were washed for 30 min in Stellaris Wash Buffer A ...
-
bioRxiv - Genomics 2022Quote: ... The remaining PIP emulsion was subjected to enzymatic lysis at 65°C for 35 min on a PCR thermocycler (Eppendorf Mastercycler Pro) with lid temperature set to 105°C ...
-
bioRxiv - Cell Biology 2020Quote: ... and the cells were pelleted by centrifugation at approximately 250 × g for 5 min at 4 °C (Eppendorf 5804 R, Hamburg, Germany). After resuspension ...
-
bioRxiv - Cell Biology 2021Quote: ... in 25 mM AB) containing 50 µg of lysate protein and shaken overnight in a thermomixer (Eppendorf; 1400 rpm at 37 °C).
-
bioRxiv - Microbiology 2020Quote: ... Liquid cultures were grown at 29°C and shaken at 200 and 180 rpm in New Brunswick Innova 2300 and Excella E25 shaking incubators (Eppendorf, Hauppauge, NY), respectively ...
-
bioRxiv - Bioengineering 2021Quote: ... of stock cells were grown overnight in 5 mL of LB at 37°C and 200 rpm on a 75° angled platform in a New Brunswick Excella E25 (Eppendorf, CT, USA). Alternatively ...
-
bioRxiv - Immunology 2021Quote: ... Lysates (5 μg) were incubated with diverse ZnCl2 or PP2A inhibitors for 30 min at 30 °C using a Thermo-mixer (Eppendorf, Hamburg, Germany). The protein samples were incubated for 30 min at 33 °C with a chemically synthesized phosphopeptide [RRA(pT)VA] ...
-
bioRxiv - Cancer Biology 2023Quote: ... and the upper phase (water-soluble metabolites) was evaporated for 30 minutes at 35°C under nitrogen and dried in SpeedVac (Eppendorf, Hamburg, Germany) at 15 °C overnight ...
-
bioRxiv - Microbiology 2022Quote: ... Bacterial mixtures were diluted 1:1000 into LB with or without 1% DMSO (v/v) and incubated standing at 37°C in 5% CO2 at atmospheric oxygen (normoxic; Eppendorf CellXpert incubator), 1% oxygen (hypoxic ...
-
bioRxiv - Microbiology 2023Quote: ... The inoculated TSB was incubated at 37 °C for overnight and washed on the next day by centrifugation (Eppendorf, Hauppauge, NY, USA) at 3,000 × g for 10 min ...
-
bioRxiv - Physiology 2023Quote: ... Microtubes were briefly vortexed and spun to collect volume at bottom of tube prior to incubation for 60 minutes at noted temperatures in a thermomixer (Eppendorf ThermoMixer C). Microtubes were immediately transferred and centrifuged at 20,000xg for 60 minutes at +25°C ...
-
bioRxiv - Zoology 2023Quote: ... The homogenates were centrifuged for 10 minutes (860 g at 4 °C) to remove the solid particulates (5810R, Eppendorf centrifuge, Hamburg, Germany) and the supernatant was removed and stored at -80 °C for later analysis [19] ...
-
bioRxiv - Microbiology 2023Quote: Liquid samples in 1 ml were collected and centrifuged for 20 min at 21 130 × g at 4°C (Centrifuge 5424 R; Eppendorf, Hamburg, Germany). The supernatants were used for chemical analyses by applying external standards for calibration and quality control ...
-
bioRxiv - Immunology 2023Quote: ... The beads were resuspended with the lysed cells for 30 minutes at 25 °C with orbital mixing at 1500 rpm using an Eppendorf Thermomixer (Eppendorf, Hamburg, Germany). Samples were centrifuged and placed on a magnet ...
-
bioRxiv - Plant Biology 2024Quote: ... SDS at a 1:3 (w/v) ratio and extracted by shaking 1000 RPM 95 °C for using a tabletop shaker (Eppendorf ThermoMixer F2.0). Samples were then centrifuged at 20,000 xg for 10 min at room temperature and the supernatant retained in new tubes ...
-
Sex-specific fear acquisition following early life stress is linked to amygdala glutamate metabolismbioRxiv - Animal Behavior and Cognition 2024Quote: ... the samples were centrifuged at 13 000 rpm for 10 min at 10°C with Centrifuge 5424 R (Eppendorf AG, Hamburg, Germany). The clear supernatant was transferred to a 1.5 mL glass vial with insert ...
-
bioRxiv - Biochemistry 2024Quote: ... The microtiter plates were closed with a transparent sealing tape to prevent evaporation of buffer solutions and incubated at 25 °C for 70 hours using a thermomixer (Eppendorf, Hamburg, Germany). After the incubation ...
-
bioRxiv - Biochemistry 2024Quote: ... by adding 1000 µL Milli-Q water and incubating for 30 min at 30 °C and 1000 rpm in a ThermoMixer (Eppendorf, Hamburg, Germany). Then ...
-
bioRxiv - Cancer Biology 2024Quote: ... All cell lines were maintained between 10% and 80% confluence and kept at 37 °C with 5% CO2 (8% CO2 for VPC cells) in a humidified CO2 incubator (Eppendorf, Enfield, CT). The viable cell density (VCD ...
-
bioRxiv - Microbiology 2024Quote: ... The culture supernatant was collected by centrifugation (6,000 rpm, 10 min, 4°C; R10A2 rotor, Himac CR21F; Eppendorf Himac Technologies, Hitachinaka, Japan). For cultures grown under photoautotrophic conditions ...
-
bioRxiv - Genetics 2024Quote: ... The samples were sonicated on ice for 12 to 15 minutes and then centrifuged for 10 minutes at 13200 rpm and 4 °C (Eppendorf centrifuge 5415R) to remove the cell debris ...
-
bioRxiv - Microbiology 2024Quote: ... one with the blood mixed to RPMI and the second with the gametocyte suspension were spun down at 2000rpm for 5 minutes in a temperature-controlled centrifuge at 37°C (Eppendorf 5702 R). RPMI supernatant was removed from both tubes with 3ml disposable Pasteur pipettes ...
-
bioRxiv - Microbiology 2023Quote: ... A 5-µg aliquot of protein was bound to SP3 beads and mixed with 50% (v/v) ethanol at 1000 RPM for 10 minutes on a heated shaking incubator (Eppendorf ThermoMixer C) at room temperature ...
-
bioRxiv - Microbiology 2023Quote: ... CNW Technologies) using 80% ACN/5% NH4OH and dried at 45°C using a vacuum centrifuge (cat. no. 5305, Eppendorf, Hamburg, Germany). The peptide samples were resolved in 2% ACN/0.1FA for LC-MS analysis ...
-
bioRxiv - Neuroscience 2023Quote: ... A total of 1800 µl of solution from both tubes (batch 1) were transferred to a 2 ml Eppendorf and vortexed (Eppendorf Thermomixer C) for 15 minutes at 2000 rpm (4 °C) ...
-
bioRxiv - Bioengineering 2023Quote: ... The recovered spores were washed by repeating the following steps for three times: (i) centrifugation at 4000 rpm at 25 °C for 10 min (5810 R, Eppendorf, Hamburg, Germany), (ii ...
-
bioRxiv - Microbiology 2022Quote: ... 20 µl supernatant was mixed with 180 µl substrate solution and incubated for 10 min at 37°C and 1000 rpm in a thermomixer (Eppendorf Thermomixer comfort). The reaction was stopped by addition of 60 µl 1 M sodium hydroxide ...
-
bioRxiv - Immunology 2022Quote: ... Purified IgG was digested into F(ab’)2 with 200 μg of IdeS per 10 mg of IgG for 6 hr on a thermal mixer (Eppendorf ThermoMixer C) at 37°C ...
-
bioRxiv - Biochemistry 2022Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) and washed with ice-cold 50 mL Binding buffer composed of 10mM imidazole (pH 7.4) ...
-
bioRxiv - Biophysics 2022Quote: ... and 6.25 A260 rRNA (23S rRNA + 5S rRNA) were mixed on ice and incubated at 44 °C using a thermo-block (Eppendorf, Thermomixer comfort) in Rec4 buffer (20 mM HEPES/KOH pH7.6 ...
-
bioRxiv - Cell Biology 2022Quote: ... The crude extract was centrifuged for 15 min at 13,000 rpm at 4 °C to remove any tissue debris and the clear supernatant was transferred to a fresh Protein Low-Bind tube (Eppendorf, Hamburg, Germany). The total protein content of the samples was estimated using Pierce BCA protein assay kit from Thermo Scientific (Rockford ...
-
bioRxiv - Cell Biology 2022Quote: The beads were resuspended with 40 µL extension mix and incubated at 37°C on a PCR cycler (Eppendorf, UX-93944-39) for 10 minutes ...
-
bioRxiv - Synthetic Biology 2022Quote: ... flasks were incubated at 37°C and 200 rpm in a New Brunswick I24 Benchtop Incubator Shaker (Eppendorf North America, Enfield, CT) until an optical density of ~0.3-0.5 was reached ...
-
bioRxiv - Genomics 2023Quote: ... Cells were pelleted by spinning at 800 g for 10 min at 4 °C in a swinging bucket centrifuge (Eppendorf Centrifuge 5810R). The supernatant was gently removed ...
-
bioRxiv - Biophysics 2023Quote: ... This pre-gel solution was kept at 4 °C inside an amber UV-protected 1.5 mL microcentrifuge tube (Eppendorf®, Hauppauge, NY), and degassed for 1 h inside a vacuum chamber to reduce oxygen concentration and prevent early gelation inside the driving syringe while running the experiment ...
-
bioRxiv - Developmental Biology 2023Quote: ... the gRNA:Cas9 ribonucleoprotein complex solution was incubated at 37°C for 5 min and then backfilled into 3 microinjection needles using an Eppendorf GELoader tip (Eppendorf, Cat# 022351656). After loading embryos into the embryo holder which covered with 12.5 ppt of salinity water with 0.0001% of methylene blue ...
-
bioRxiv - Microbiology 2024Quote: ... The mixture was centrifuged for 30 min at 15000 rpm at 4°C in the centrifuge Eppendorf 5702RH (Eppendorf SE, Hamburg, Germany). The pellet was resuspended in the 1/5 of the in initial volumes in PBS buffer (ThermoFischer Scientific ...
-
bioRxiv - Microbiology 2024Quote: ... Pre-weighted metal-free 15 mL propylene tubes were used to pellet the cells in a tabletop centrifuge at 4 °C (Eppendorf, Hauppauge, NY). Pellets were washed three times with 10 mL of ice-cold PBS ...
-
bioRxiv - Cell Biology 2024Quote: ... The sample was placed on ice to incubate for 30 minutes before the demembraned flagella supernatant was removed after centrifugation at 16,000 × g for 10 min at 4°C in a microfuge (Eppendorf, Centrifuge 5415 D). The pellet containing the axoneme was resuspended in 245 μl of Cilia Final Buffer (without trehalose) ...
-
bioRxiv - Plant Biology 2024Quote: ... The samples were then incubated for 3 h at 37 °C with 600 rpm shaking on a thermomixer with a ThermoTop (Eppendorf, Hamburg, Germany) to reduce condensation into the caps of collection tubes ...
-
bioRxiv - Developmental Biology 2024Quote: Chromatin was pre-cleared by centrifugation at 14,000×g for 15min at 4°C and the supernatant was moved to a 1.5mL DNA LoBind® tube (Eppendorf: Hamburg, Germany). From each chromatin sample per phenotype per lineage ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was collected after centrifugation at 4 °C for 5 min at 5000 g and dried using a SpeedVaq (Eppendorf, Montesson, France). Then ...
-
bioRxiv - Bioengineering 2024Quote: ... 500μl of samples previously diluted by 10 in DPBS were deposited in Amicon® filter before centrifugation at 2000g during 15min at 4°C (Centrifuge 5804 R, Eppendorf®). Then ...
-
bioRxiv - Microbiology 2024Quote: ... The peptides were eluted in glass vials (CNW Technologies, cat#A3511040) using 80% ACN/5% NH4OH and dried at 45 °C using a vacuum centrifuge (Eppendorf, cat#5305). The peptide samples were resolved in 2% ACN/0.1FA for LC-MS analysis ...