Labshake search
Citations for Eppendorf :
501 - 550 of 1333 citations for 6 Methyl 5 4 phenyl 1 3 thiazol 2 yl 2 trifluoromethyl nicotinic acid since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2024Quote: ... 1:1v/v mixture of 33% ammonium hydroxide and 40% methylamine in water for 3 h at 37 °C (Eppendorf ThermoMixer C, 1000 rpm). The suspension was filtered ...
-
bioRxiv - Bioengineering 2021Quote: ... CsupADH_17286 and HzeaADH7 were introduced into Agrobacterium tumefaciens GV3101 strain (MP90RK) by electroporation (1700 V mm-1, 5 ms, Eppendorf 2510). A viral silencing suppressor protein P19 was introduced into GV3101 strain as well in order to inhibit the host cells’ transgene silencing apparatus and extend transgene expression over a longer period of time with a higher degree of expression (Canto et al ...
-
bioRxiv - Cell Biology 2023Quote: ... or at 37°C/5% CO2/1% O2 in a nitrogen-controlled hypoxic incubator (New Brunswick Galaxy 170R, Eppendorf, Hamburg, Germany). Prior to media changes ...
-
bioRxiv - Cell Biology 2020Quote: ... or western blot analysis (200 000 cells in 6-well plates (Eppendorf, cat# 0030720113) were left to attach for 48h ...
-
bioRxiv - Cell Biology 2021Quote: ... Cells were then seeded in a Matrigel-coated 6-well plate (Eppendorf, cat # 0030720113) to 2.5×106 cells/well with dual SMAD inhibitor media supplemented with Dorsomorphin (1μM ...
-
bioRxiv - Genomics 2024Quote: ... 6-8×105 cells were sorted in a 5mL low binding tube (Eppendorf, 0030122356) pre-coated with 1mL of 1X PBS + 0.04%BSA (Sigma-Aldrich ...
-
bioRxiv - Cell Biology 2024Quote: ... 10,000 × g for 40 min using with FA-45-6-30 Rotor (Eppendorf, Germany), 100,000 × g ultracentrifugation for 90 min using Himac CP70NE Ultracentrifuge (Himac ...
-
bioRxiv - Microbiology 2021Quote: ... The samples were immediately cooled on ice and centrifuged for 12 min at 4°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf). The cell pellets were stored at −20°C until RNA extraction.
-
bioRxiv - Microbiology 2021Quote: ... The cells were transferred into anaerobic 50 mL reaction tubes inside the anaerobic chamber and harvested outside of the anaerobic chamber for 12 min at 4°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf). The supernatant was discarded inside the anaerobic chamber and the pellet was resuspended in fresh RCM medium to an OD600 of 5-10 ...
-
bioRxiv - Neuroscience 2024Quote: Suspensions were centrifuged at 4°C in 50 mL centrifuge tubes (Falcon) with a 5810R centrifuge and an A-4-81 rotor (Eppendorf) and in 38.5 mL polyallomer Ultra Clear ultracentrifuge tubes (Beckman Coulter ...
-
bioRxiv - Cell Biology 2022Quote: ... and InjectMan®4 micromanipulator (Cat#. 5192000035, Eppendorf) using external continuous pressure ...
-
bioRxiv - Immunology 2021Quote: ... at 10.000 rpm and 4°C (Eppendorf 5804R), for the removal of residual titanium [16].
-
bioRxiv - Cell Biology 2022Quote: ... for 10 minutes at 4°C (Eppendorf, Germany), and supernatants were transferred into fresh tubes to be evaporated to dryness in a CentreVap concentrator at 40°C (Labconco ...
-
bioRxiv - Bioengineering 2024Quote: ... 15 min at 4°C (Eppendorf, Hamburg, Germany). duRNA was generated through equimolar annealing of trRNA/crRNA in duplex buffer (IDT) ...
-
bioRxiv - Microbiology 2024Quote: ... or MasterCycler EP Realplex 4 thermal cycler (Eppendorf). Data were analyzed using recA and gyrA as internal controls ...
-
bioRxiv - Cancer Biology 2023Quote: ... at 4°C for 1 hour and centrifuged at 4°C at 14200 rpm for 50 min using a refrigerated table-top centrifuge (Eppendorf Centrifuge, Hamburg, Germany). The cleared lysates were loaded on wells of 96-well single-use filter micro-plates with 3 µm glass fibers and 25 µm polyethylene membranes (Agilent ...
-
bioRxiv - Biochemistry 2024Quote: ... The samples were then digested for 4 h at 37°C (1000 x rpm for 1 h, then 650 x rpm, Eppendorf ThermoMixer®C). Samples were then diluted 1:1 with milliQ water ...
-
bioRxiv - Immunology 2020Quote: Using 5 mL lo-bind tubes (Eppendorf), 960 μL of ice-cold methanol was added to ~1 mL of protein supernatant and vortexed briefly before subsequent addition of 160 μL of ice-cold chloroform and thorough mixing ...
-
bioRxiv - Microbiology 2022Quote: ... Bacterial mixtures were diluted 1:1000 into LB with or without 1% DMSO (v/v) and incubated standing at 37°C in 5% CO2 at atmospheric oxygen (normoxic; Eppendorf CellXpert incubator), 1% oxygen (hypoxic ...
-
bioRxiv - Biochemistry 2021Quote: ... cells were seeded into 6-well or 12-well polystyrene coated plates (Eppendorf; EP0030720130, EP0030721012) at a density of 0.3 x 106 cells mL−1 or 0.1 x 106 cells mL−1 ...
-
bioRxiv - Bioengineering 2022Quote: ... Subsequent washes were performed at a volume of 5 mL in 5 mL Eppendorf tubes (Cat. No. 0030122321, Eppendorf) and pelleted with a compatible microcentrifuge (MC-24™ Touch ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... were diluted with sterile 1x PBS to 10 µg/mL (according to the manufacturer’s recommendation) in the volume of 5 mL in 5-mL Protein LoBind tubes (Eppendorf). For chip assays ...
-
bioRxiv - Cell Biology 2022Quote: ... Eluted lysates in 60% acetonitrile/0.1% formic acid were dried by vacuum centrifugation (Eppendorf; Concentrator Plus) at 45°C.
-
bioRxiv - Biochemistry 2023Quote: ... in 0.3% acetic acid was added to a 96-well plate (CAT# 0030128664, Eppendorf, Hamburg, Germany), sealed with plate seal (CAT# 5010-21951 ...
-
bioRxiv - Biophysics 2020Quote: ... The cell suspension was subsequently centrifuged for 30 min at 4°C and 3250 × g (Eppendorf Swing-bucket rotor A-4-62). The supernatant was discarded ...
-
bioRxiv - Biochemistry 2022Quote: ... 4 °C for 10 sec (5424-R Eppendorf microfuge) and the pellet was resuspended with 400 μl TES Solution (10 mM Tris-HCl ...
-
bioRxiv - Biophysics 2021Quote: ... 20°C for 4 hours (Thermomixer 5355 R, Eppendorf). After incubation ...
-
bioRxiv - Molecular Biology 2022Quote: ... Reactions were performed in a Realplex 4 Thermocycler (Eppendorf) using the following program ...
-
bioRxiv - Genetics 2024Quote: ... 000 RPM for 10 minutes at 4°C (Eppendorf), followed by transfer of the plasma to tubes ...
-
bioRxiv - Microbiology 2024Quote: ... 4°C for 20 minutes (Eppendorf® 5418 R) to collect all the cells ...
-
bioRxiv - Microbiology 2024Quote: ... by centrifugation at 8,000 rpm for 3 mins (Eppendorf 5417C centrifuge). The supernatant was decanted ...
-
bioRxiv - Synthetic Biology 2022Quote: ... and then 6 mL of the culture was collected by centrifugation at 2,500g (5810 R, Eppendorf) for 5 min at room temperature.
-
bioRxiv - Microbiology 2024Quote: An agar plug (6 mm diameter) of the bacterial culture was transferred to a vial (Eppendorf) and extracted with 1 mL of isopropanol ...
-
bioRxiv - Microbiology 2023Quote: ... vortexed for 5 min and then centrifuged (Eppendorf Centrifuge model 5810 R ...
-
bioRxiv - Microbiology 2023Quote: ... centrifuging for 5 min at 7,500 rcf (Eppendorf, tabletop centrifuge MiniSpin plus with rotor F-45-12-11) ...
-
bioRxiv - Biophysics 2021Quote: ... Lipid extracts were resuspended in 60 μl 10mM ammonium acetate in methanol and diluted 1:4 in 96-well plates (Eppendorf twin.tec® 96; Sigma-Aldrich) prior to measurement of PC species ...
-
bioRxiv - Developmental Biology 2024Quote: ... The cells were washed with cold staining buffer (1× PBS, 0.2% BSA and 5 mM glucose) and spun down at 150 × g with low brake (Eppendorf Centrifuge 5810 R, Hamburg, Germany). The cell number was counted using a hemocytometer ...
-
bioRxiv - Neuroscience 2020Quote: ... for 30 min at 4°C on centrifuge (Eppendorf #5804R) and rotor (Eppendorf #S-4-72) ...
-
bioRxiv - Cell Biology 2022Quote: ... Microneedles were manually controlled with an InjectMan 4 micromanipulator (Eppendorf). The compensation pressure set on the FemtoJet was 35hPa for the whole injection experiment to avoid damages on cells ...
-
bioRxiv - Biophysics 2022Quote: ... The probe was controlled with a micromanipulator (Injectman 4; Eppendorf) and mounted on an inverted epifluorescent microscope.
-
bioRxiv - Molecular Biology 2024Quote: ... followed by high-speed centrifugation (4°C, 12000rpm, Eppendorf, 5424R) for 20 minutes to collect the protein supernatant ...
-
bioRxiv - Microbiology 2023Quote: ... The supernatant was centrifuged (Eppendorf 5810R, A-4-62 Rotor) for 10 minutes at 500 x g to separate the remaining blood cells from the plasma.
-
bioRxiv - Cell Biology 2024Quote: ... Microneedles were manually controlled with an InjectMan 4 micromanipulator (Eppendorf). Microinjection of cells were performed on an inverted microscope (Nikon Ti2 Eclipse ...
-
bioRxiv - Bioengineering 2024Quote: ... Homogenates were agitated at 4°C in a thermomixer (Eppendorf) for 2 hours ...
-
bioRxiv - Cell Biology 2024Quote: ... The probe was controlled with a micromanipulator (Injectman 4, Eppendorf), and mounted on an inverted epifluorescence microscope.
-
bioRxiv - Cell Biology 2024Quote: ... 4℃ for 15 min using Eppendorf 5810R Centrifuge (Eppendorf, Germany) with A-4-81 Rotor (Eppendorf ...
-
bioRxiv - Genetics 2024Quote: ... in a 96-well Eppendorf Realplex 4 PCR machine (Eppendorf).
-
bioRxiv - Cancer Biology 2024Quote: ... 4°C for 10 minutes using a 5415R microcentrifuge (Eppendorf) and supernatants were transferred ...
-
bioRxiv - Synthetic Biology 2022Quote: ... a 6 mL portion of each cell culture was collected by centrifugation at 2,500g (5810 R, Eppendorf) for 5 min at 4 °C ...
-
bioRxiv - Cell Biology 2024Quote: ... was loaded with 10 μM of filtered folic acid solution and then connected to a FemtoJet microinjector (Eppendorf). The microinjector was operated in continuous injection mode with a compensation pressure of 15 hPa ...