Labshake search
Citations for Eppendorf :
451 - 500 of 672 citations for 8 4 Chlorophenylthio guanosine 3' 5' cyclic Monophosphate triethylammonium salt since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2022Quote: ... Lysates were centrifuged at 4°C at 15,000 RPM for 15 minutes in a table top centrifuge (Eppendorf 5424R). The supernatant’s protein concentration was measured using Bradford’s assay (Bio-Rad #5000202) ...
-
bioRxiv - Microbiology 2023Quote: ... harvested by centrifugation (3,500 × g for 20 min at 4°C, Centrifuge 5702 R, Eppendorf North America, Framingham, MA), and suspended in an equivalent amount of 1 × PBS ...
-
bioRxiv - Microbiology 2023Quote: ... The precipitated gDNA was pelleted by centrifugation (21,000 x g, 10 min at 4°C) in a tabletop centrifuge (Model 5424, Eppendorf). The supernatant was discarded by decantation ...
-
bioRxiv - Neuroscience 2023Quote: ... and tubes centrifuged at 4 °C for 2 min at 12000 x g in a refrigerated microfuge (Eppendorf 5415R). The upper phase was discarded ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... Samples were centrifuged at 10,000 rpm at 4°C for 10 min and supernatants were dried under vacuum centrifugation (Eppendorf) overnight ...
-
bioRxiv - Bioengineering 2023Quote: All centrifugation experiments were conducted in an Eppendorf 5702R centrifuge with a swing bucket rotor (Eppendorf, A-4-38) at 20°C ...
-
bioRxiv - Microbiology 2023Quote: ... The parasite solution was pelleted at 1,200 g at 4°C for 10 min using a chilled large tabletop centrifuge (Eppendorf). The resulting pellet underwent 3 washes with intracellular buffer ...
-
bioRxiv - Cell Biology 2023Quote: ... The incubated sample was centrifuged at 20,800 g for 15 min at 4 °C (Rotor F45-30-11, Eppendorf), and the resulting supernatant was analyzed by immunoblotting using various antibodies ...
-
bioRxiv - Cell Biology 2023Quote: ... fractions numbered from 9 to 22 were processed by centrifugation (20,800 g for 30 min at 4 °C, Rotor F45-30-11, Eppendorf), and the resulting pellet was further resuspended in 160 μL of alkaline carbonate buffer (100 mM Na2CO3 ...
-
bioRxiv - Biochemistry 2023Quote: ... Cells were washed in 20 mL of chilled phosphate-buffered saline (1X PBS, pH 7.4), and centrifuged (1500 ×g, 4 °C, 15 min) using the Centrifuge 5810R (Eppendorf). The cell pellet was subsequently resuspended in 30 mL of ice-cold RSB hypo buffer (10 mM NaCl ...
-
bioRxiv - Microbiology 2024Quote: ... the homogenate was centrifuged at 2500 rpm for 10 minutes at 4°C using a benchtop centrifuge (Eppendorf, USA), and the supernatant was collected.
-
bioRxiv - Biochemistry 2022Quote: ... and samples were vortexed at 1200 rpm for 2-3 hours at room temperature (MixMate ®, Eppendorf South Pacific, Sydney, NSW Australia). Following this ...
-
bioRxiv - Systems Biology 2022Quote: ... each SCN was cut into 3 pieces with a scalpel on a glass slide and transferred to a protein LoBind tube (Eppendorf, Hamburg, Germany) prefilled with 250 µL lysis buffer (100 mM Tris-HCl ...
-
bioRxiv - Microbiology 2022Quote: ... were also added to each tube and incubated at 37°C for 3 h in a thermomixer (Eppendorf Thermomixer C, Hamburg, Germany). After 3 h incubation ...
-
bioRxiv - Biophysics 2023Quote: ... and the device was left running for a minimum of 3 h while droplets were being collected in a 1.5 mL microcentrifuge tube (Eppendorf®, Hauppauge, NY).
-
bioRxiv - Biophysics 2023Quote: ... Cell growth was quantified at intervals by measuring their optical density at regular intervals (as mentioned in Figure 3) using a Biophotometer® D30 (Eppendorf, Germany). The morphology of cells at different growth stages was determined by a variety of microscopic techniques (as described in the below sections).
-
bioRxiv - Plant Biology 2024Quote: ... SDS at a 1:3 (w/v) ratio and extracted by shaking 1000 RPM 95 °C for using a tabletop shaker (Eppendorf ThermoMixer F2.0). Samples were then centrifuged at 20,000 xg for 10 min at room temperature and the supernatant retained in new tubes ...
-
bioRxiv - Microbiology 2021Quote: ... All centrifugation steps were performed at 13806 rpm for 5 min (Centrifuge 5424, FA-45-24-11, Eppendorf). Recombinant E ...
-
bioRxiv - Neuroscience 2019Quote: ... After 5 days of incubation at 37°C with constant agitation (1,000 rpm) in an orbital mixer (Eppendorf), reactions were sonicated for 5 min in a Branson 2510 water bath ...
-
Intra-mitochondrial proteostasis is directly coupled to alpha-synuclein and Amyloid β 1-42 pathologybioRxiv - Neuroscience 2020Quote: ... Samples were incubated at 37°C for 5 days in 0.5 mL Protein Lobind tubes (Eppendorf, Hamburg, Germany) under continuous rotation at maximum speed (UVP HB-1000 Hybridizer ...
-
bioRxiv - Paleontology 2020Quote: ... 5 mg of bone powder was transferred to a 2 mL Eppendorf® tube (Eppendorf; Westbury, NY, USA) and 1 mL of demineralizing solution (5% trifluoroacetic acid (TFA ...
-
bioRxiv - Microbiology 2021Quote: ... the samples were vortexed for 5 min at 3,000 rpm with an Eppendorf MixMate® (Eppendorf, Hamburg, Germany). For lysis ...
-
bioRxiv - Genomics 2021Quote: ... The suspensions were centrifuged for 5 minutes at 2,000g at RT using a tabletop centrifuge (Centrifuge 5810R, (Eppendorf)) ...
-
bioRxiv - Genomics 2021Quote: ... 5 μL nuclease free water) and incubated for 45 min at 37°C at 1000 rpm (Eppendorf Thermomixer) for fragmentation ...
-
bioRxiv - Microbiology 2021Quote: ... we transferred the filter and its contents into a 5-mL polypropylene snap-cap tube (Eppendorf, Hamburg, Germany) because some filter units contained sample water and could not fit the lysis reagents ...
-
bioRxiv - Cell Biology 2022Quote: ... About 5×107 cells as 325 µl suspensions in 1.5 ml safe-lock tubes (Eppendorf AG, Hamburg, Germany) were ruptured by brief pulsed sonication at RT using the ultrasonic homogeniser SONOPULS mini20 ...
-
bioRxiv - Microbiology 2020Quote: ... and subjected to low-speed centrifugation at 20 × g for 5 min (Centrifuge 5810 R, Eppendorf, Hamburg, Germany) to eliminate gross particulate material ...
-
bioRxiv - Microbiology 2022Quote: ... cells were pelleted by centrifugation for 5 min at 15,700 x g using 5415R Microcentrifuge (Eppendorf, Hamburg, Germany) and the supernatant was frozen at −20° C until further use ...
-
bioRxiv - Molecular Biology 2022Quote: ... pH 8.5) with boiling at 95°C for 5 mins with mixing at 1,000 rpm on a ThermoMixer (Eppendorf), cooled on ice ...
-
bioRxiv - Microbiology 2023Quote: ... we centrifuged 1 mL overnight-cell culture in a 1.5 mL Eppendorf tube at 7’500 rcf for 5 min (Eppendorf, tabletop centrifuge MiniSpin plus with rotor F-45-12-11 ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The sender strains deep-well plate was then centrifuged at 4000 rpm for 5 minutes (Centrifuge Eppendorf 5810R) and the supernatants were transferred by pipetting in a new 2 mL deep-well plate ...
-
bioRxiv - Neuroscience 2023Quote: ... Samples were centrifugated at 10.000xg at room temperature for 5 min (centrifuge MiniSpin® Eppendorf, ClearLine, Venice, Italy) and stored at −80°C until further use.
-
bioRxiv - Microbiology 2023Quote: ... and the cells were incubated at 37°C/ 5% CO2/ 1% O2 (Galaxy 170 R/ New Brunswick/ Eppendorf). Cells were cultured for up to 14 days with bi-weekly media change ...
-
bioRxiv - Bioengineering 2023Quote: ... the nanoparticles were collected via centrifugation at 12000 rpm (13523 x g) for 5 min (Centrifuge 5420, Eppendorf), and then washed with acetone and distilled water 3 times ...
-
bioRxiv - Microbiology 2024Quote: ... Each 9 mL suspension was centrifuged at 9,000 × g for 5 min (Centrifuge 5810 R, Eppendorf, Hamburg, Germany). DNA extraction was performed from the pellet using the GeneJET Genomic DNA Purification Kit (Thermo Fisher Scientific ...
-
bioRxiv - Molecular Biology 2021Quote: ... 1 mM label was subsequently added and samples were incubated over night at 4°C and 350 rpm in a Thermomixer (Eppendorf). Excess label was removed by using a Sephadex G25 column (GE Healthcare Bio-Science AB ...
-
bioRxiv - Bioengineering 2022Quote: ... The lysates were clarified by centrifugation at 18,500g at 4 °C for 30 minutes using tabletop centrifuge (Eppendorf Centrifuge 5810R). Soluble protein was separated from cell debris and the supernatant was passed through 5 mL HisTrap columns (Cytiva ...
-
bioRxiv - Neuroscience 2021Quote: ... Single EGFP+ cells were sorted on a BD Influx equipped with a 140 µm nozzle and a cooling unit with a sample temperature of 4°C and collected into a DNA LoBind tube (Eppendorf) containing aCSF with 0.5% BSA ...
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Microbiology 2019Quote: ... the vials were removed from the incubator and beads were spun down at 1200 rpm using a swinging-bucket A-4-81 rotor (Eppendorf). An aliquot of 10 µl of bead suspension was carefully sampled from the bottom of the vials ...
-
bioRxiv - Genetics 2020Quote: ... The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042, Eppendorf, Inc.) and the resultant supernatant fractions were stored at −80°C ...
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Neuroscience 2020Quote: ... 180 μL aliquots of solubilized GlyT1 cell membrane were dispensed in a 4°C-cooled 96-well PCR plate (Eppendorf) in triplicates ...
-
bioRxiv - Microbiology 2021Quote: ... Cell harvest was performed outside the anaerobic chamber at 3700 rpm for 12 min (Centrifuge 5920R, S-4×1000, Eppendorf) at room temperature ...
-
bioRxiv - Microbiology 2021Quote: ... the cells were transferred into the anaerobic chamber and harvested for 12 min at 25°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf) outside of the anaerobic chamber ...
-
bioRxiv - Neuroscience 2019Quote: ... The lysate was cleared from the insoluble fraction by centrifugation for 15 min at 10,000 rpm (11,292 x g) at 4 °C (Eppendorf 5427 R). The supernatant was retrieved and the procedure repeated until no pellet was visible after centrifugation ...
-
bioRxiv - Biochemistry 2021Quote: ... The reactions were stopped by the addition of phosphoric acid and 4 µl of each reaction were spotted on P81 phosphocellulose papers (Whatman) using the epMotion 5070 (Eppendorf) workstation ...
-
bioRxiv - Microbiology 2019Quote: ... PMNs were sedimented for 10 min with 1000 × g at 4°C on 45° fixed-angle rotor FA-45-30-11 (Eppendorf). The supernatant was filtered by gravity through sterile PVDF 5.0 µm Millex syringe filters (Merck-Millipore) ...
-
bioRxiv - Cell Biology 2021Quote: ... The resuspended cilia sample was centrifuged at 16,000g for 10 min at 4°C in a microfuge (Eppendorf, Centrifuge 5415D). The supernatant was discarded ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... The plasma was defrosted and then centrifuged at 2000 rpm (805 × g) for 4 min in a 5810 R centrifuge (Eppendorf) to remove possible particulate matter ...