Labshake search
Citations for Corning :
51 - 100 of 107 citations for MOA SAP Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2022Quote: ... which was mixed with PDMS precursor (SYLGARD® 184 Silicone Elastomer kit, Dow Corning, US) and curing agent at a ratio of 10:1 ...
-
bioRxiv - Neuroscience 2022Quote: ... Negative masters were covered with polydimethylsilozane (PDMS, syligard 184 silicone elastomer kit, Dow Corning Corporation) mixed with a curing agent at 10:1 ratio (elastomeric base:curing agent ...
-
bioRxiv - Bioengineering 2023Quote: ... PDMS base and curing agent (Sylgard 184 silicone elastomer kit, Dow Corning, Midland, MI, USA) were thoroughly mixed at a 10:1 ratio (w/w) ...
-
bioRxiv - Microbiology 2023Quote: ... which were then purified using the efficient AxyPrep™ DNA Gel Extraction Kit from Corning, NY ...
-
bioRxiv - Pharmacology and Toxicology 2019Quote: ... Permeability study was carried out using CorningTM BioCoatTM Intestinal Epithelium Differentiation Environment Kit (Corning, NY, USA). Cell incubation and induction of differentiation were performed in accordance with the protocol of the kit ...
-
bioRxiv - Cancer Biology 2020Quote: All microfluidic chips were fabricated in polydimethylsiloxane (PDMS) polymer (Sylgard 184 elastomer kit; Dow Corning Corp) using the standard soft lithography as described (31) ...
-
bioRxiv - Bioengineering 2021Quote: ... Hepatocyte Culture Media Kit (item 355056) with supplemented epidermal growth factor (EGF) was purchased from Corning, Inc. ...
-
bioRxiv - Cell Biology 2021Quote: ... The poly-dimethylsiloxane (PDMS) chips were made using the Silicone Elastomer Kit 184 (Sylgard, Dow Corning) with a 1:10 ratio of curing agent to base ...
-
bioRxiv - Physiology 2022Quote: ... coated with ~2 mm of clear Sylgard (Sylgard 184 Silicone elastomer kit; Dow Corning; Midland, MI). To avoid interference from secondary pacemaker tissues we removed the atrioventricular node from the preparation.
-
bioRxiv - Microbiology 2022Quote: Microfluidic mother machine devices were fabricated in polydimethylsiloxane (PDMS, Sylgard 184 silicone elastomer kit, Dow Corning) following previously reported protocols[73 ...
-
bioRxiv - Cancer Biology 2022Quote: ... Polydimethylsiloxane (PDMS) replicas of the molds were made using a Sylgard 184 PDMS kit (Dow Corning) using the (1:10 ...
-
bioRxiv - Genomics 2021Quote: ... and purified with the Magnetic beads AxyPrep: MAG PCR Clean-Up Kit (Axygen-Corning, AZ, USA). All barcoded samples were pooled together (~15ng DNA ...
-
bioRxiv - Biophysics 2023Quote: ... PDMS was prepared from the commercially available Sylgard 184 silicone elastomer kit (Dow Corning, Midland, MI) by mixing the curing agent and the base (1:10 ratio ...
-
bioRxiv - Bioengineering 2023Quote: ... a mixture of PDMS precursor and crosslinker (SYLGARD™ 184 Silicone Elastomer Kit, Dow Corning Corp.) at a 1:9 ratio is dispensed onto the mold and cured by heating at 80°C for 2 hours ...
-
bioRxiv - Genetics 2021Quote: The Part A and Part B of polydimethylsiloxane (PDMS) resin (Sylgard 184 Silicone Elastomer Kit, Dow Corning) were mixed at the ratio of 10:1 and poured onto the SU-8 mold placed in a tray made of aluminum foil ...
-
bioRxiv - Bioengineering 2019Quote: ... All PDMS was fabricated from a Sylgard® 184 Silicone Elastomer kit (Dow Corning Corporation, Midland, MI), except for the PDMS membranes ...
-
bioRxiv - Bioengineering 2021Quote: ... that was pre-coated with 200 μl of PDMS (Sylgard 184 elastomer kit, Dow Corning, Midland, MI) prepared according to manufacturer’s protocol to create a hydrophobic surface ...
-
bioRxiv - Bioengineering 2022Quote: ... PDMS pre-polymer and the curing agent (Sylgard 184 Silicone Elastomer kit, Dow Corning Inc., Midland, MI) were mixed in a 10:1 w/w ratio ...
-
bioRxiv - Genomics 2021Quote: ... Pooled PCR products were cleaned of excess PCR reagents via Axygen® AxyPrep FragmentSelect-I Kit (Corning, Tewksbury ...
-
bioRxiv - Molecular Biology 2023Quote: ... vector pcDNA3/Flag-METTL3 (addgene #53739) was transformed and the plasmid was extracted with Axygen kit (Corning). Next ...
-
bioRxiv - Biophysics 2023Quote: ... Polydimethylsiloxane (PDMS; 1:10 w/w cross-linker:pre-polymer) (Sylgard 184 kit, Dow Corning, cat. DC184-1.1). Stamps are produced with UV-photolithography ...
-
bioRxiv - Bioengineering 2023Quote: ... A curing agent was added to the PDMS base (Sylgard 184 silicone elastomer kit; Dow Corning Corporation) to a final concentration of 10 % by weight ...
-
bioRxiv - Cell Biology 2020Quote: ... Micropillars were then produced by mixing silicone elastomer and curing reagent (PDMS Sylgard 184 Elastomere Kit, Dow Corning) in a ratio of 7:1 ...
-
bioRxiv - Developmental Biology 2021Quote: ... c-Kit+) from neonatal wild-type mice were FACS sorted into precoated 8 well culture slides (Corning, 354688) and incubated at 37 °C in a 5% CO2 cell incubator with 100µM IWR-1 or vehicle control in Stemline II haematopoietic stem cell expansion medium (Sigma ...
-
bioRxiv - Bioengineering 2019Quote: ... The template was then cast into a flexible PDMS plate using Sylgard 184 silicone elastomer kit (Dow Corning) (Figure 1a ...
-
bioRxiv - Biophysics 2020Quote: Stamps for micropatterning were fabricated by soft lithography using polydimethylsiloxane (PDMS; Sylgard 184 Silicone Elastomer Kit; Dow Corning). Briefly ...
-
bioRxiv - Microbiology 2021Quote: ... genomic DNA of each isolates was extracted using AxyPerp Bacterial Genomic DNA Miniprep Kit (Corning, New York, USA) following manufacturer’s protocol ...
-
bioRxiv - Physiology 2019Quote: ... 50 μM L-proline) were seeded onto each sylgard coated (Sylgard 184 Elastomer Kit, Dow Corning, MI, USA) 35 mm culture dish containing a pre-polymerised (10 mins at room temperature and 1hr at 37 degrees ...
-
bioRxiv - Biochemistry 2021Quote: ... A 10:1 ratio of PDMS to curing agent (Sylgard 184 silicone elastomer kit, Dow Corning, Midland, MI) was mixed ...
-
bioRxiv - Developmental Biology 2021Quote: ... the polydimethoxysilane (PDMS) prepolymer:curing agent mixture (10:1 [w/w], Sylgard 184 Silicone Elastomer Kit, Dow Corning, USA) was cured overnight on the SU-8 mold at 60°C ...
-
bioRxiv - Cancer Biology 2022Quote: ... The silanized mold was then used for device fabrication with Polydimethylsiloxane (PDMS, Sylgard 184 Elastomer Kit, Dow Corning) at a ratio of 10:1 ...
-
bioRxiv - Bioengineering 2022Quote: PDMS implants were prepared by mixing two components of the Sylgard™ 182 silicone elastomer kit (Dow Corning) in a 10:1 ratio by weight ...
-
bioRxiv - Bioengineering 2023Quote: The Trans-well cell invasion assay was conducted using Costar 6.5 mm Trans-well kit (8.0 μm Pore, Corning) per manufactory instructions ...
-
bioRxiv - Bioengineering 2023Quote: ... Experimental devices were then cast from polydimethylsiloxane (PDMS) (SYLGARD™ 184 Silicone Elastomer kit, Dow Corning, MI, USA). PDMS was mixed with curing agents (10:1 w/w ...
-
bioRxiv - Bioengineering 2020Quote: ... Sylgard 184 elastomer Polydimethylsiloxane (PDMS) was mixed with curing agent (Sylgard 184 silicone elastomer kit, Dow Corning, Midlands, USA), at a 5:1 ratio in a mixer including a 2 min de-foaming step before pouring it onto the master silicon wafer designed by our lab and spin-coating at 400 rpm for 40 seconds ...
-
bioRxiv - Bioengineering 2022Quote: ... Pre-molds were fabricated by casting polydimethylsiloxane (PDMS/ 1:10 ratio) (Sylgard®184 Silicone Elastomer Kit, Down Corning) from a computer numerical control (CNC ...
-
bioRxiv - Biophysics 2019Quote: ... was generated by addition of 5 ml of the two well-mixed liquid components from the Sylgard 184 kit (Dow Corning) (at 10:1 mass ratio ...
-
bioRxiv - Biophysics 2019Quote: ... Microfluidic chips were created by casting a degassed 10:1 mix of polydimethylsiloxane (PDMS) and curing agent (Sylgard 184 kit; Dow Corning) on the master wafer ...
-
bioRxiv - Systems Biology 2021Quote: ... We made the microfluidic devices by pouring a degassed 10:1 mixture of dimethyl-siloxane monomer and curing agent (Sylgard 184 Silicone Elastomer Kit, Dow Corning) onto the wafer ...
-
bioRxiv - Bioengineering 2020Quote: ... a mixture of PDMS and curing agent in a 10:1 weight ratio (Sylgard 184 silicone elastomer kit, Dow Corning) was poured onto the ER mold and cured in an oven at 40 °C overnight ...
-
bioRxiv - Biophysics 2022Quote: ... a thin layer of PDMS (~600 μm in thickness) was generated by mixture of the two liquid components from the Sylgard 184 kit (Dow Corning). The PDMS sheet was cut into circular pieces on which one or more holes with 0.6 cm in diameter were created by a mechanical puncher ...
-
bioRxiv - Bioengineering 2022Quote: ... USA) to suppress milling surface defects and to favour PDMS (SYLGARD®, 184 Silicon Elastomer Kit, Dow Corning, Midland, USA) pilling ...
-
bioRxiv - Synthetic Biology 2019Quote: ... All fragments obtained by polymerase chain reaction were gel-purified using a DNA Gel Extraction kit (Axygen, Corning, NY, USA) according to manufacturer’s instructions ...
-
bioRxiv - Cell Biology 2023Quote: ... A 10:1 mixture of Sylgard 184 elastomer Polydimethylsiloxane (PDMS) and curing agent (Sylgard 184 silicone elastomer kit, Dow Corning) was freshly prepared ...
-
bioRxiv - Cell Biology 2020Quote: ... Replicas of the patterned mould were obtained by soft lithography using polydimethylsiloxane (PDMS) (Sylgard 184 Silicone Elastomer Kit; Dow Corning Corporation). The PDMS base and curing agent were mixed at 10:1 ratio ...
-
bioRxiv - Systems Biology 2019Quote: ... the master mold was filled with a 10:1 mixture of base to curing agent of the PDMS kit Sylgard 184 (Dow Corning, USA) and left at 60°C in an oven for 4 hours to crosslink the PDMS ...
-
Cultivation and characterization of human midbrain organoids in sensor integrated microfluidic chipsbioRxiv - Bioengineering 2019Quote: Microstructures were fabricated by soft lithography from a CNC milled mold using polydimethylsiloxane (PDMS) (Sylgard® 184 Silicone Elastomer Kit, Down Corning). After polymerization at 80 °C ...
-
bioRxiv - Systems Biology 2021Quote: ... Structures were covered with a ∼1 cm thick layer of PDMS mixed with curing agent at a 1:10 ratio (Sylgard 186 elastomer kit, Dow Corning Inc) and cured overnight at 65 °C ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... Devices were produced by pouring onto a mould a prepolymer mixture of polydimethylsiloxane (PDMS, Sylgard 184 silicone elastomer kit, Dow Corning Corp.) with a 1:10 ratio of curing agent and curing at 65°C for a minimum of 4 hours ...
-
bioRxiv - Bioengineering 2022Quote: T-SLICE chips were prepared by pouring Polydimethylsiloxane (PDMS) (10:1 elastomer to curing agent, Sylgard 184™ Silicone Elastomer Kit, Corning) into the resin molds ...