Labshake search
Citations for Corning :
601 - 650 of 1259 citations for EnzyFluo Collagen Assay Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cancer Biology 2021Quote: ... Cell viability and density were estimated under a microscope and 300 μL of cell suspension were seeded into type I collagen (Corning)-coated 35 mm dishes (MatTek) ...
-
bioRxiv - Cell Biology 2019Quote: ... Passage six hMPCs were used for all experiments and were cultured in a 5% CO2 atmosphere at 37°C on collagen coated plates (Type I, Rat Tail, Corning). For cell culture experiments ...
-
bioRxiv - Microbiology 2019Quote: ... primary human tracheobronchial epithelial cells were seeded in BEGM with or without 10 μM Y-27635 onto Collagen Type IV coated 24-well Transwell HTS plates (Corning) at the density of 250.000 cells per cm2 ...
-
bioRxiv - Immunology 2021Quote: ... The cells were transferred to type IV collagen-coated Transwell polycarbonate membranes (24-well, 0.4 μm pore size, Corning Costar) in a cell density of 2.5 × 105 cells/filter ...
-
bioRxiv - Bioengineering 2020Quote: ... The inner surfaces of both channels and membrane were coated with 200 ug/ml rat tail collagen type I (354236, Corning) and 4% Matrigel (Corning ...
-
bioRxiv - Bioengineering 2020Quote: ... the chip devices were sterilized in an autoclave and the porous member of the device was coated with rat tail collagen type I (200 μg/mL, Corning) on both sides at 37 °C for 48 h before cell seeding.
-
bioRxiv - Biochemistry 2021Quote: ... Hepatocytes were seeded at a density of 2×106 cells per well in a 6-well plate coated with collagen type I (Corning) at 10 µg cm-2.
-
bioRxiv - Biochemistry 2020Quote: ... Hepatocytes were isolated by perfusion protocol (Seglen, 1972) and plated at density of 7×10^5/well on a 6-well collagen coated plates (Corning) in DMEM supplemented with 10% FBS ...
-
bioRxiv - Cell Biology 2021Quote: ... hepatocytes were plated on collagen coated cell culture plates and grown for no longer than 48 hours for all experiments (Corning BioCoat Collagen I ...
-
bioRxiv - Bioengineering 2021Quote: ... cells were trypsinized and resuspended into a 1.6 mg/mL collagen gel in DMEM without serum supplemented with 1:100 dilution of Matrigel (Corning, 354234). The gel was polymerized onto a plasma cleaned coverslip mounted in the imaging chamber at 37C for one hour ...
-
bioRxiv - Microbiology 2021Quote: ... Primary cells derived from single patient sources were expanded on plastic and subsequently plated (5 x 104 cells / well) on rat-tail collagen type 1-coated permeable transwell membrane supports (6.5 mm, #3470; Corning, Inc., Corning, NY). HAE cultures were grown in Pneumacult-Ex basal medium (#05008 ...
-
bioRxiv - Biophysics 2020Quote: ... the flow chamber of the AFS chip is coated with 68 μg/ml collagen type I from rat tail (Corning) for at least 4 h at room temperature ...
-
bioRxiv - Biophysics 2022Quote: ... After quick washing treated sides of the coverslips were then covered for 1 hour with 90 μg/ml collagen type I (Corning Collagen I ...
-
bioRxiv - Bioengineering 2022Quote: ... Brooks Lifesciences) were coated with 200 μL of 2 mg/mL type 1 rat tail collagen (354249, Corning/BD Biosciences) diluted in DMEM equilibrated in 1/10 v/v of 7.5% w/v sodium bicarbonate solution (#25080-060 ...
-
bioRxiv - Cancer Biology 2022Quote: Traction force measurements of mouse primary tumor lines were performed using traction force microscopy on polyacrylamide gels embedded with 0.2 µm crimson fluorescent beads (Thermo Fischer Scientific, Waltham, MA) and coated with Type-I Collagen (Corning, Corning, NY). Collagen coated polyacrylamide gels of varying Young’s modulus were prepared as previously described (Bangasser et al. ...
-
bioRxiv - Cancer Biology 2019Quote: ... 5×104 cells/ACM of either less-invasive HT29 or highly-invasive HCT116 cells were used and 240 μL of the collagen mix was added to a 96-well plate (Corning® Costar® through Sigma-Aldrich ...
-
bioRxiv - Bioengineering 2021Quote: ... were surface activated according to the manufacturer protocol and both apical and basal channels were then coated with 200 μg/ml collagen I (Corning) and 1% v/v Matrigel in serum-free DMEM-F12 (Gibco ...
-
bioRxiv - Bioengineering 2020Quote: ... The substrates were then coated with a solution of 11% (w/v) type 1 rat tail collagen (1:80 dilution, Corning) overnight at 4°C ...
-
bioRxiv - Neuroscience 2022Quote: ... Filters and plates were coated (24h, 37°C) with a mixture of collagen type IV and fibronectin (10 µg/mL for both, Corning) as we previously published for rat brain microvascular cells (Molino et al. ...
-
bioRxiv - Neuroscience 2022Quote: ... Filters and plates were precoated (24h, 37°C) with a mixture of 400 µg/ml collagen type IV and 100 µg/ml fibronectin (Corning) as previously reported by Lippmann et al ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... and plated at a density of 4 x 105 cells/well of a BioCoat Collagen I 24 well plate (Corning). Hepatocytes were infected with HBV virus GTC (PXB Strain PBB004 ...
-
bioRxiv - Bioengineering 2019Quote: Collagen was prepared using a 1:9 solution of 10X HEPES (500 mM HEPES with 10X PBS and pH 7.6): ~9 mg/mL rat tail collagen I (Corning, 354249), producing a final concentration of 1X HEPES and ~8 mg/mL collagen ...
-
bioRxiv - Cell Biology 2019Quote: ... the inner surfaces of both channels and the porous PDMS membrane were coated with 200 µg ml−1 rat tail collagen type I (354236, Corning) and 1 % Matrigel (354230 ...
-
bioRxiv - Cancer Biology 2020Quote: ... The Matrigel sphere containing the cancer cells was harvested from the mineral oil and resuspended in a type I collagen solution (10 μl, Corning). This mixture was then dropped into mineral oil at 37 °C for 1 hour to allow for the gelation of type I collagen ...
-
bioRxiv - Neuroscience 2019Quote: ... bEnd.3 mouse endothelial cells were seeded at a density of 6.0 × 104 cells/cm2 on the luminal side of collagen-coated trans-well inserts (Corning, 3460) with bEnd.3 media for growth facilitation at 37°C incubation ...
-
bioRxiv - Immunology 2019Quote: ... or high (4 mg/ml) collagen density was prepared and added to wells of non-tissue-culture treated 24-well plates (Corning). The collagen solution was allowed to polymerize for at least 30 min ...
-
bioRxiv - Immunology 2019Quote: ... which were subsequently plated (5×104 cells/well) on rat-tail collagen type 1-coated permeable transwell membrane supports (6.5mm; Corning Inc). HAE cultures were grown in B-ALI medium supplemented with inducer (Lonza Inc. ...
-
bioRxiv - Physiology 2020Quote: ... The islets were embedded within a thin layer of 500 μL of Rat Type I collagen (Corning, Bedford, MA, USA), as previously described (20 ...
-
bioRxiv - Microbiology 2021Quote: ... Primary cells derived from single patient sources were expanded on plastic and subsequently plated (3.3×104 cells / well) on rat-tail collagen type 1-coated permeable transwell membrane supports (6.5 mm, #3470; Corning, Inc.). The immortalized HAE line BCi-NS1.1 was kindly provided by Drs ...
-
bioRxiv - Developmental Biology 2020Quote: ... 250,000 UGM:5,000 LumP cells) and resuspended in 10-15 μl buttons composed of 9:1 collagen 1 (Corning 354249):setting solution (10x EBSS ...
-
bioRxiv - Bioengineering 2020Quote: ... The glass-bottom dishes were pre-coated with a solution of 11% (w/v) type 1 rat tail collagen (1:80 dilution, Corning) overnight at 4°C.
-
bioRxiv - Cell Biology 2022Quote: ... Panx3 KO keratinocytes were also grown on tissue culture plates coated with 50 ug/mL or 100 ug/mL rat tail type I collagen (354236; Corning), poly-D-lysine/laminin (354595 ...
-
bioRxiv - Bioengineering 2022Quote: ... The PDMS membrane was then coated with 1 ml of 50 μg/ml rat collagen I (Corning, Corning, NY, USA) overnight in the incubator of 37 °C and 5% CO2 ...
-
bioRxiv - Bioengineering 2022Quote: ... The PDMS membrane was then coated with 1 ml of 50 μg/ml rat collagen I (Corning, Corning, NY, USA) overnight in the incubator of 37 °C and 5% CO2 ...
-
bioRxiv - Biophysics 2023Quote: ... PAA gels were functionalized using 1.0 mg/ml Sulfo-SANPAH (Pierce) and coated with 25 μg/ml (CP) or 100 μg/ml (CH) rat tail collagen type I (Corning).
-
bioRxiv - Bioengineering 2023Quote: ... The apical channel was coated in a 400 μg/mL solution of rat tail type I collagen (cat no. 354249, Corning), after which the chips were placed in a humidified incubator at 37C and 5% CO2 for one hour ...
-
bioRxiv - Physiology 2023Quote: Untreated iHCF and macrophage supernatant-treated iHCF (1 × 10 5 per well) were mixed with rat tail collagen type I (#354236, Corning) matrices on a 24-well plate ...
-
bioRxiv - Cell Biology 2023Quote: ... Prior to cell seeding the membrane was coated on the bottom with 0.1 mg/ml collagen rat tail (Corning, USA) and on the top ...
-
bioRxiv - Cell Biology 2022Quote: ... with the exception that they were plated on a ∼2 mm thick bed of rat tail-derived Collagen Type I (354236, Corning).
-
bioRxiv - Cancer Biology 2023Quote: ... HUB040 organoids were dissociated into single cells and 2.5 × 105 cells were plated in 10 μL drops of neutralized Rat Tail High Concentrated Type I Collagen (Corning, C3867). Cultures were allowed to recover overnight at 37 °C ...
-
bioRxiv - Microbiology 2023Quote: ... Airway cells were then seeded (3.3 × 104 cells/well) on rat tail collagen type 1-coated permeable Transwell membrane supports (6.5 mm; no. 3470, Corning, Inc.) and differentiated in Pneumacult-ALI medium (no ...
-
bioRxiv - Cancer Biology 2023Quote: ... or SUM159 cells transfected with GFP were resuspended in full media (400,000 cells/ml) with 1mg/mL collagen I (354236; Corning, Corning, NY), 10mM NaOH ...
-
bioRxiv - Biochemistry 2023Quote: Normal and Myo6 null HeLa cells were grown in multi-well tissue culture plates on coverslips coated with rat collagen I (Corning). FLMyo6 (WT ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... were seeded as Sandwich Cultured Hepatocyte (SCH) at a density of 215,000 cells/ cm2 directly onto the collagen I- and fibronectin- (Corning; Sigma) coated cell chamber ...
-
bioRxiv - Bioengineering 2023Quote: ... the hydrogel surface is further coated with 0.1 mg/ml Rhodamine-labelled fibronectin or collagen I (Rat tail, Corning Inc., Corning, NY), again in 2 ml for one large hydrogel and 0.1 ml for one 20-mm gel piece ...
-
bioRxiv - Cell Biology 2022Quote: Fibroblasts were isolated from an Acomys neonate and expanded for two passages on soft silicone (Sy1gard™ 527 Silicone Dielectric Gel, Dow Inc.) coated with 0.01mg/mL rat tail collagen I (Corning) prior to being frozen and shipped to ALSTEM ...
-
bioRxiv - Cell Biology 2023Quote: ... ESCs were differentiated into hepatocytes for 35 days in collagen-coated 12-well plates (353043, BD Falcon; Corning, NY, USA). HPCs were cultured in 12-well plates (353043 ...
-
bioRxiv - Cancer Biology 2023Quote: ... 1.2 x 106 MCF10A or GBM cells per dish were seeded into collagen- or laminin-coated 100 mm cell culture dishes (Corning). 48 hours later ...
-
bioRxiv - Neuroscience 2023Quote: Albumin transcytosis was measured in vitro by culturing mBECs on collagen IV-coated 3.0-µm PET membrane inserts for 24-well plates (Corning, 353096). Cytokines or vehicle were added at a concentration of 100 ng/mL ...
-
bioRxiv - Cell Biology 2023Quote: ... the cardiomyocyte-enriched cells were seeded into 96-well plates coated with 5 ug/cm2 rat tail collagen I (354236, Corning) in plating media at a density of 80,000-150,000 cells per well.