Labshake search
Citations for Corning :
201 - 226 of 226 citations for Cow Osteomodulin OMD ELISA Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2022Quote: PDMS implants were prepared by mixing two components of the Sylgard™ 182 silicone elastomer kit (Dow Corning) in a 10:1 ratio by weight ...
-
bioRxiv - Bioengineering 2023Quote: ... Experimental devices were then cast from polydimethylsiloxane (PDMS) (SYLGARD™ 184 Silicone Elastomer kit, Dow Corning, MI, USA). PDMS was mixed with curing agents (10:1 w/w ...
-
bioRxiv - Bioengineering 2023Quote: The Trans-well cell invasion assay was conducted using Costar 6.5 mm Trans-well kit (8.0 μm Pore, Corning) per manufactory instructions ...
-
bioRxiv - Bioengineering 2020Quote: ... Sylgard 184 elastomer Polydimethylsiloxane (PDMS) was mixed with curing agent (Sylgard 184 silicone elastomer kit, Dow Corning, Midlands, USA), at a 5:1 ratio in a mixer including a 2 min de-foaming step before pouring it onto the master silicon wafer designed by our lab and spin-coating at 400 rpm for 40 seconds ...
-
bioRxiv - Bioengineering 2022Quote: ... Pre-molds were fabricated by casting polydimethylsiloxane (PDMS/ 1:10 ratio) (Sylgard®184 Silicone Elastomer Kit, Down Corning) from a computer numerical control (CNC ...
-
bioRxiv - Biophysics 2019Quote: ... was generated by addition of 5 ml of the two well-mixed liquid components from the Sylgard 184 kit (Dow Corning) (at 10:1 mass ratio ...
-
bioRxiv - Biophysics 2019Quote: ... Microfluidic chips were created by casting a degassed 10:1 mix of polydimethylsiloxane (PDMS) and curing agent (Sylgard 184 kit; Dow Corning) on the master wafer ...
-
bioRxiv - Systems Biology 2021Quote: ... We made the microfluidic devices by pouring a degassed 10:1 mixture of dimethyl-siloxane monomer and curing agent (Sylgard 184 Silicone Elastomer Kit, Dow Corning) onto the wafer ...
-
bioRxiv - Bioengineering 2020Quote: ... a mixture of PDMS and curing agent in a 10:1 weight ratio (Sylgard 184 silicone elastomer kit, Dow Corning) was poured onto the ER mold and cured in an oven at 40 °C overnight ...
-
bioRxiv - Biophysics 2022Quote: ... a thin layer of PDMS (~600 μm in thickness) was generated by mixture of the two liquid components from the Sylgard 184 kit (Dow Corning). The PDMS sheet was cut into circular pieces on which one or more holes with 0.6 cm in diameter were created by a mechanical puncher ...
-
bioRxiv - Bioengineering 2022Quote: ... USA) to suppress milling surface defects and to favour PDMS (SYLGARD®, 184 Silicon Elastomer Kit, Dow Corning, Midland, USA) pilling ...
-
bioRxiv - Synthetic Biology 2019Quote: ... All fragments obtained by polymerase chain reaction were gel-purified using a DNA Gel Extraction kit (Axygen, Corning, NY, USA) according to manufacturer’s instructions ...
-
bioRxiv - Cell Biology 2023Quote: ... A 10:1 mixture of Sylgard 184 elastomer Polydimethylsiloxane (PDMS) and curing agent (Sylgard 184 silicone elastomer kit, Dow Corning) was freshly prepared ...
-
bioRxiv - Cell Biology 2020Quote: ... Replicas of the patterned mould were obtained by soft lithography using polydimethylsiloxane (PDMS) (Sylgard 184 Silicone Elastomer Kit; Dow Corning Corporation). The PDMS base and curing agent were mixed at 10:1 ratio ...
-
bioRxiv - Systems Biology 2019Quote: ... the master mold was filled with a 10:1 mixture of base to curing agent of the PDMS kit Sylgard 184 (Dow Corning, USA) and left at 60°C in an oven for 4 hours to crosslink the PDMS ...
-
Cultivation and characterization of human midbrain organoids in sensor integrated microfluidic chipsbioRxiv - Bioengineering 2019Quote: Microstructures were fabricated by soft lithography from a CNC milled mold using polydimethylsiloxane (PDMS) (Sylgard® 184 Silicone Elastomer Kit, Down Corning). After polymerization at 80 °C ...
-
bioRxiv - Systems Biology 2021Quote: ... Structures were covered with a ∼1 cm thick layer of PDMS mixed with curing agent at a 1:10 ratio (Sylgard 186 elastomer kit, Dow Corning Inc) and cured overnight at 65 °C ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... Devices were produced by pouring onto a mould a prepolymer mixture of polydimethylsiloxane (PDMS, Sylgard 184 silicone elastomer kit, Dow Corning Corp.) with a 1:10 ratio of curing agent and curing at 65°C for a minimum of 4 hours ...
-
bioRxiv - Bioengineering 2022Quote: T-SLICE chips were prepared by pouring Polydimethylsiloxane (PDMS) (10:1 elastomer to curing agent, Sylgard 184™ Silicone Elastomer Kit, Corning) into the resin molds ...
-
bioRxiv - Biophysics 2023Quote: ... was then mixed with d2-labeled cAMP and anti-cAMP cryptate-labeled antibody provided in the kit in a 384-well plate (Corning, REF3824). The plate was sealed and incubated at room temperature for 1 hour ...
-
bioRxiv - Cell Biology 2019Quote: ... which still allows cells to feel the stiffness of an underlying PDMS gel (Sylgard 184 silicone elastomer kit, Dow Corning, Midland, USA), different volumes were tested in the angiogenesis slide ...
-
bioRxiv - Physiology 2019Quote: The ring was covered with a baked PDMS lid (polydimethylsiloxane) (Dow Corning Sylgard® 184 Silicone Elastomer Kit; Dow Corning, Auburn MI) and sealed with liquid bandage to hold the BCP media or olive oil ...
-
bioRxiv - Microbiology 2023Quote: ... The wafer acts as a mold for liquid polydimethylsiloxane mixed with 10% by weight with its own curing agent (PDMS; Sylgard 184 Silicone Elastomer Kit, Dow Corning, Midland, MI). After solidification ...
-
bioRxiv - Genomics 2023Quote: ... following manufacturer’s protocol. Resulting DNA was cleaned using Axygen AxyPrep MAG PCR Clean-Up Kit (cat. MAG-PCR-CL-50) (Corning, Glendale, AZ). DNA was incubated with 2X volume of magnetic bead solution on a shaker for 5 minutes ...
-
bioRxiv - Bioengineering 2021Quote: ... a master mold was placed on a plastic Petri dish (150 mm diameter) and a PDMS (Sylgard 184 silicone elastomer kit; Dow Corning, Midland, MI, USA) base was mixed with a curing agent in a 10:1 ratio ...
-
bioRxiv - Microbiology 2020Quote: ... and a negative polydimethylsiloxane (PDMS) mold was created from the silicon wafer using a 5:1 mixture of monomer and curing agent (Dow Corning Sylgard 184 Kit). After removing air bubbles using vacuum ...