Labshake search
Citations for Corning :
1801 - 1850 of 2312 citations for Protachykinin 1 Blocking Peptide since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cancer Biology 2023Quote: ... 8.0-micron transwell 24 well plate inserts were coated with 100 µl of 1 mg/ml matrigel (Corning 254234). The plates coated with matrigel were incubated for 1 h at 37°C to solidify ...
-
bioRxiv - Cancer Biology 2023Quote: ... 20,000 cells were seeded in 0.1-1% serum in the upper compartment of 8 μm Corning Transwell polycarbonate membrane cell culture inserts (3422, Corning) and attracted to the bottom by medium with 10% serum ...
-
bioRxiv - Synthetic Biology 2023Quote: The silicon wafer with fabricated SU-8 features was placed in a petri dish and covered with ∼40 mL of polydimethylsiloxane (10:1 PDMS:Curing agent, Sylgard 184, Dow Corning). The dish was placed for ∼1 h under vacuum to remove bubbles and baked at 75-80□°C for ∼4 h ...
-
bioRxiv - Physiology 2023Quote: ... Human monocytes (THP-1) were purchased (ATCC, TIB-202) and cultured in RPMI-1640 medium (Corning, 15-040-CV) supplemented with 10% FBS ...
-
bioRxiv - Biochemistry 2023Quote: ... HEK293T cells with stable human ACE2 expression in DMEM supplemented with 10% FBS and 1% PenStrep were seeded at 40,000 cells/well into 96-well plates [3610] (Corning) coated with poly-lysine [P4707] (Sigma ...
-
bioRxiv - Biophysics 2023Quote: SK-MEL-2 melanoma cells (ATCC were seeded into 96-well V-bottom plates at 1 x 107 cells/ml in 100 µL Dulbecco’s Modified Eagle Medium (DMEM, Corning) supplemented with 100 U/ml penicillin-streptomycin and 10% FBS ...
-
bioRxiv - Microbiology 2024Quote: ... Overnight overnight cultures were diluted at a ratio of 1:100 in polystyrene 96-well plates manufactured by Corning® Costar® ...
-
bioRxiv - Systems Biology 2024Quote: ... We seeded macrophages at 1× 106/ml in polystyrene Falcon® round bottom tubes (Corning® LifeSciences, Corning, USA) for flow cytometry ...
-
bioRxiv - Cancer Biology 2023Quote: ... cells were grown with DMEM 1X media with either 1 or 4.5 g/L glucose (10-013-CV, Corning). In these experiments ...
-
bioRxiv - Cell Biology 2024Quote: ... we grew myoblasts and generated myotubes on 4 µm thick polypropylene foil (Goodfellow) pre-coated with 10 ng.µL-1 of Cell-Tak (Corning) followed by 10 % Matrigel (Corning ...
-
bioRxiv - Cell Biology 2024Quote: ... Cells expressing relatively low levels of the sensor or other proteins were imaged at the bottom surfaces by TIRF microscopy every 1 or 1.5 s for a duration of 3 or 5 min in phenol-free DMEM/F12 (Corning) containing 5% FBS and 20 mM HEPES ...
-
bioRxiv - Cell Biology 2024Quote: Cells were cultured until confluent in 24-well tissue culture plates and treated with 1 U/ml dispase (Corning) for 15 min at 37°C ...
-
bioRxiv - Cancer Biology 2024Quote: ... 1×104 cells of HSJD-DIPG-012 or HSJD-DIPG-014 were seeded in 96-well plates (Corning, 7007). Cells were treated at seeding with concentrations of 1 ...
-
bioRxiv - Immunology 2024Quote: ... all mice were infected with 1x 105 PFU of either hCoV-19/USA/MD-HP01542/2021 (Lineage B.1.351; Beta Variant) or hCoV-19/Japan/TY7-503/2021 (Lineage P.1; Gamma Variant) diluted in PBS (Corning) via intranasal instillation in 0.03 mL ...
-
bioRxiv - Cancer Biology 2024Quote: For the Subcutaneous tumor models,1×106 SW620 cells were re-suspended in 100 μl 0.25 mg/ml Matrigel (Corning) with PBS buffer ...
-
bioRxiv - Microbiology 2024Quote: ... were added at an effector: target ratio of 10:1 in 96-well V-bottom plates (Corning, Corning, NY). Target cells were treated with either DMSO or CJF-III-288 at indicated concentrations ...
-
bioRxiv - Microbiology 2024Quote: ... were added at an effector: target ratio of 10:1 in 96-well V-bottom plates (Corning, Corning, NY). Target cells were treated with either DMSO or CJF-III-288 at indicated concentrations ...
-
bioRxiv - Microbiology 2024Quote: ... the mixture was inoculated at an overall OD of 0.01 in 1 mL of the respective media in a 96 Polypropylene Deep Well plate (3959, Corning) sealed with a Breathe-Easy® sealing membrane (Z380059 ...
-
bioRxiv - Cancer Biology 2024Quote: ... 1% antibiotic solution (100 mg/L streptomycin, 100 U/ml penicillin) and 10% fetal bovine serum (Corning, NY USA). Cell lines used are described in Table 1.
-
bioRxiv - Microbiology 2024Quote: ... were added at an effector: target ratio of 10:1 in 96-well V-bottom plates (Corning, Corning, NY). Anti-Env mAbs (5 µg/mL ...
-
bioRxiv - Microbiology 2024Quote: ... were added at an effector: target ratio of 10:1 in 96-well V-bottom plates (Corning, Corning, NY). Anti-Env mAbs (5 µg/mL ...
-
bioRxiv - Biochemistry 2024Quote: Purified RECQL5 and nanobody were mixed at a ratio of 1:1.5 and concentrated using 10 kDa concentrator (Amicon and Corning), followed by Sepax SRT SEC-300 HPLC or Superdex-200 SEC (Cytiva) ...
-
bioRxiv - Cancer Biology 2021Quote: ... resuspended in 1% FBS medium and plated in transwell tissue culture inserts (8 µm polycarbonate membrane, 24 well, 3428; Corning). For the invasion assays 1.5 µg/ml Matrigel dissolved in serum-free medium was pipetted on top of the transwell membrane and left to set at 37°C for several hours before plating the cells ...
-
bioRxiv - Developmental Biology 2021Quote: ... 80-90 % confluent PNP/NC cultures at P5 were dissociated to single cells and plated at 1:10 onto Matrigel hESC-Qualified matrix (Corning) into DMEM:F12 (Thermo Fisher Scientific ...
-
bioRxiv - Cancer Biology 2021Quote: A549 control cells and cells re-expressing NKX2-1 were plated in a white 96-well polypropylene assay plate (Corning) at a density of 10,000 cells per well ...
-
bioRxiv - Cancer Biology 2021Quote: ... transfected HDMECs in EBM (1×107 cells/mL) were mixed with the same volume of growth factor-reduced Matrigel (∼20 mg/mL; Corning) and then supplemented with 1 µg/mL VEGF (R&D Systems) ...
-
bioRxiv - Cell Biology 2020Quote: ... mOSE cells were placed in a 1:1 mixture of methylcellulose and stem cell media at 5×10^4 cells/mL in 24-well culture plates (Corning), and incubated at 37 °C ...
-
bioRxiv - Cell Biology 2020Quote: ... transfected cells were sorted by flow cytometry using a BD Influx(tm) cell sorter and GFP-positive cells seeded 1 cell per well in 96-well plates (Corning) to generate monoclonal cell lines ...
-
bioRxiv - Developmental Biology 2021Quote: ... The detached cells were triturated into single-cell suspensions and seeded onto 24-well plates pre-coated with 1:40 Growth Factor Reduced (GFR) Matrigel (Corning), in a density of 2 × 105 cells/cm2 ...
-
bioRxiv - Molecular Biology 2021Quote: ... 2 mM glutamine, 100 mM dexamethasone, 50 μg/mL ascorbic acid, 40 μg/mL L-Proline, 1% ITS+ (Insulin, Transferrin, Selenium) (Corning), 1 mM sodium pyruvate and penicillin-streptomycin (100U/mL) ...
-
bioRxiv - Immunology 2020Quote: Luciferase-labeled tumor cells (1×104/well) were plated in 100 μl RPMI-1640 with 2% FCS in white 96-flat bottom wells (Corning). After 24 hours incubation ...
-
bioRxiv - Bioengineering 2022Quote: ... The chilled MONHA hydrogel precursor solution was pipetted as (1) 10 μl droplets onto PDMS-coated (Sylgard 184; Dow Corning) 24-well culture plates ...
-
bioRxiv - Genomics 2020Quote: ... and 1% penicillin-streptomycin (Fisher cat. 15140122)) in a 37°C incubator with 5% CO2 on 10 cm culture dishes (Corning). Prior to staining ...
-
bioRxiv - Synthetic Biology 2020Quote: ... Individual colonies were picked into 1 mL of YPD in a 2-mL V-bottom 96-well block (Corning/Costar) for overnight growth at 30 °C and 900 rpm in a Multitron shaker (Infors HT) ...
-
bioRxiv - Bioengineering 2020Quote: ... with a thin layer of PDMS prepolymer comprising of PDMS base monomer and curing agent (10:1 w/w; Sylgard 184, Dow-Corning). PDMS coating layer was then thermally cured at 110 °C for at least 24 h ...
-
bioRxiv - Biophysics 2019Quote: ... Microfluidic chips were created by casting a degassed 10:1 mix of polydimethylsiloxane (PDMS) and curing agent (Sylgard 184 kit; Dow Corning) on the master wafer ...
-
bioRxiv - Microbiology 2019Quote: ... cultures were diluted to 1×105 choanoflagellate cells/mL in 5% SWC and 100 µL volumes were aliquoted into a 96-well plate (Corning).
-
bioRxiv - Biophysics 2019Quote: ... 1 µm tall and 10 µm apart) was placed face-up in a Pyrex borosilicate glass petri plate (Corning, Inc). The glass plate and the mask were placed next to a glass beaker containing 30 mL of 2% dimethyldichlorosilane solution in a vacuum chamber under a fume hood ...
-
bioRxiv - Cell Biology 2019Quote: ... 1.5 mg of total protein lysate was cleared by centrifugation and mixed with Streptavidin-agarose beads (Fisher) in 1% SDS in DPBS (Corning). Beads and lysates were incubated overnight at 4°C and proteins bound on beads were washed the next day with 0.1% SDS in DPBS ...
-
bioRxiv - Microbiology 2021Quote: ... were mixed with the supernatant containing ebolavirus-pps and incubated for 1 h at 37°C in white solid-bottom 96-well plates (Corning). Based on recent studies on EBOV infectivity in various cell lines72,109 ...
-
bioRxiv - Systems Biology 2021Quote: ... We made the microfluidic devices by pouring a degassed 10:1 mixture of dimethyl-siloxane monomer and curing agent (Sylgard 184 Silicone Elastomer Kit, Dow Corning) onto the wafer ...
-
bioRxiv - Microbiology 2021Quote: Growth and propagation of enteroids is described in.82 All media compositions can be found in.49 Noggin conditioned media was prepared according to protocols in.83 Enteroids were grown for about 1 week in Matrigel (Corning) with the following modifications ...
-
bioRxiv - Microbiology 2021Quote: ... The following day cells were scraped off the plate using a cover slip and put in a 2 mL tube and vortexed vigorously for 2 mins with 1 mL of phosphate buffer saline (PBS – Corning). Cells suspensions were subsequently spun at 16 ...
-
bioRxiv - Bioengineering 2021Quote: PDMS Sylgard 184 silicone elastomer base was mixed with curing agent in a 1:10 ratio (Dow Corning, ref 01673921). The mixture was poured on the silicon wafer ...
-
bioRxiv - Bioengineering 2021Quote: ... The gels were thereafter incubated in 75% ethanol for 5 min and cleansed three times with 50 mL of 1× phosphate-buffered saline (PBS, 46-013-CM, Corning) within a biosafety cabinet under aseptic conditions.
-
bioRxiv - Bioengineering 2020Quote: ... a mixture of PDMS and curing agent in a 10:1 weight ratio (Sylgard 184 silicone elastomer kit, Dow Corning) was poured onto the ER mold and cured in an oven at 40 °C overnight ...
-
bioRxiv - Bioengineering 2020Quote: ... 1.46–1.48) with a 1% agarose solution in a Borosilicate glass tube (RI = 1.47, Pyrex 7740, Corning, New York, USA) to reduce refraction and reflection from various interfaces ...
-
bioRxiv - Neuroscience 2021Quote: ... 10 ng/µl PDGF-AA (#100-13A, Pepro- Tech), 10 ng/µl human NT3 (#450-03, Pepro-Tech) and 1:1000 Trace element B (#25022CI, Corning) diluted in DMEM/F12 (#21331-020 ...
-
bioRxiv - Cancer Biology 2020Quote: ... pelleted at 400g and plated in collagen I coated dishes (0.3 mg/ml collagen I, Corning, in 1% acetic acid). BCC cells were cultured using EpiLife medium with 60 µM calcium (GIBCO MEPI500CA) ...
-
bioRxiv - Biophysics 2021Quote: ... cured at 70°C for 30 minutes and subsequently cast with regular PDMS to the layer final thickness of 8 mm (rPDMS; 1:5 curing agent/base ratio, Sylgard-184, Dow Corning). Cured (at 70°C for ∼1 hour ...