Labshake search
Citations for Beckman :
1 - 50 of 1397 citations for tert Butyl 10 oxo 4 9 diazaspiro 4.5 decane 4 carboxylate since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2024Quote: ... Samples were added to the top of a 60%-30%-10% sucrose/PBS gradient and centrifuged at 16,000 x g for 4.5 h at 4°C with an SW32 Ti rotor (Beckman, Brea, CA). Virus bands at the 60%-30% sucrose interface were collected via tube side puncture ...
-
bioRxiv - Biochemistry 2021Quote: ... 9 s relapse) and centrifuged twice at 11,000 x g for 20 min at 4°C (Beckman) to pellet cell debris ...
-
bioRxiv - Biophysics 2021Quote: ... centrifuged (Beckman Avanti, 1500 x g, 10 min, 4 °C) and pellets were flash-frozen and stored at −80 °C.
-
bioRxiv - Biochemistry 2020Quote: ... centrifuged at 90,000 rpm for 10 min at 4°C (TLA120.1 Beckman Coulter), and then polymerized by incubation at 37°C for 30 mins ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C (Beckman Coulter). The pellet containing lentiviral particles was suspended in the residual medium ...
-
bioRxiv - Genomics 2020Quote: ... 4°C (Beckman Coulter). Supernatant was loaded onto 5 ml HisTrap FF columns (GE Healthcare ...
-
bioRxiv - Molecular Biology 2020Quote: ... 4°C (Beckman Coulter). Clarified lysates were poured several times over 0.5-1 ml Streptactin resin (IBA ...
-
bioRxiv - Cancer Biology 2023Quote: ... 4°C (Beckman Coulter). The pellet containing lentiviral particles was suspended in the residual medium ...
-
bioRxiv - Biochemistry 2020Quote: ... and spun at 90,000 rpm for 10 min at 4°C (TLA120.1 Beckman Coulter). After incubation at 37°C for 2 mins ...
-
bioRxiv - Biochemistry 2020Quote: ... A Multisizer 4 (Beckman Coulter) machine was used ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (SW55Ti rotor, Beckman). The pellets were resuspended in 25% (w/v ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (VTi65.1 rotor, Beckman) with the maximum acceleration and minimum deceleration allowing for isopycnic separation of subcellular particles and membranes ...
-
bioRxiv - Biochemistry 2021Quote: ... 4°C (SW41 rotor, Beckman). The supernatant was concentrated with a 100-kDa molecular weight cutoff concentrator (Merck Millipore ...
-
bioRxiv - Cell Biology 2024Quote: ... 4-laser Gallios (Beckman Coulter) flow cytometer ...
-
bioRxiv - Bioengineering 2022Quote: ... samples (10 mL) were first centrifuged at 7000Xg at 4°C for 30 minutes (Beckman Coulter Avanti J-E Series ...
-
bioRxiv - Neuroscience 2021Quote: ... The homogenate was centrifuged at 1,800 rpm for 10 min at 4°C (Beckman F0630 rotor) obtaining a supernatant (S1 ...
-
bioRxiv - Cancer Biology 2021Quote: ... 4°C (Beckman Coulter Allegra X15r). After the final wash to remove Matrigel ...
-
bioRxiv - Molecular Biology 2021Quote: ... 4°C (SW41Ti rotor, Beckman Coulter) and 16 fractions were collected ...
-
bioRxiv - Molecular Biology 2021Quote: ... 4°C (SS34 Rotor, Beckman Coulter).
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (with Beckman SW32 rotor). The pellet will contain rough microsomes and the interface between 0.25-1.3M will contain smooth microsomes ...
-
bioRxiv - Neuroscience 2021Quote: ... 4°C (Beckman Coulter F301.5 rotor) to remove large aggregates ...
-
bioRxiv - Biophysics 2023Quote: ... 4 °C (TLA-45 Beckman rotor). The solubilized proteins were separated on 4–15 % BN-gels and analyzed by immune detection using polyclonal α-YidC antibodies ...
-
bioRxiv - Biophysics 2020Quote: ... Cells were collected by centrifuging for 10 min at 4 °C at 4,000g (JLA-9.1000, Beckman Coulter). The bacterial pellet was resuspended in 50 mM Tris-HCl pH 8.0 ...
-
bioRxiv - Neuroscience 2021Quote: ... KG, Staufen, Germany) (position 6, 4 × 5-s bursts) and subsequently centrifuged at 48,000g at 4°C (Beckman Avanti J-251 Ultracentrifuge ...
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Microbiology 2020Quote: ... 4°C in an SW55Ti rotor (Beckman), and the virus pellet harvested for analysis by WB with αGag.
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Cell Biology 2020Quote: ... 4 °C with 70Ti rotor (Beckman Coulter) to collect sEV pellets in double 0.22 μm-filtered PBS ...
-
bioRxiv - Microbiology 2024Quote: ... 4 °C in SW41 rotor (Beckman Coulter). Polysomes profiles were obtained using Biocomp Piston Gradient Fractionator (BioComp Instruments ...
-
bioRxiv - Microbiology 2024Quote: ... 4°C (Optima TLX Ultracentrifuge, Beckman Coulter). The pellet was resuspended in 200 µL of ultrapure water.
-
bioRxiv - Microbiology 2022Quote: ... 4 °C in SW41 rotor (Beckman Coulter). Samples were fractionated and collected using Biocomp Piston Gradient Fractionator (BioComp Instruments) ...
-
bioRxiv - Microbiology 2022Quote: ... 4 °C in SW28 rotor (Beckman Coulter). Gradients were fractionated using Biocomp Piston Gradient Fractionator (BioComp Instruments) ...
-
bioRxiv - Developmental Biology 2024Quote: ... at 4°C (JLA 8.1000 rotor, Beckman), lysed in Lysis buffer (20 mM Hepes ...
-
bioRxiv - Biophysics 2024Quote: ... 4 °C (Type 70 Ti, Beckman Coulter), the supernatant was purified by IMAC (5 mL HiTrap Chelating HP ...
-
bioRxiv - Microbiology 2020Quote: ... Then 4 ml of the adjusted lipoprotein was layered under 8 ml of 0.9% NaCl and centrifuged at 49,000 rpm for 4 hours at 10°C (NVTi 65 rotor; Beckman). The HDL (lower band ...
-
bioRxiv - Cell Biology 2023Quote: ... Cells were harvested by two rounds of centrifugation (6,000 rpm, 10 min, 4°C, JLA-9.1000 rotor; Beckman), resuspended in Buffer A containing 50 mM Tris-HCl pH8.0 ...
-
bioRxiv - Cell Biology 2023Quote: ... 10% and 6% and ultracentrifuged at 187,000xg for 1:30h at 4°C in Sw32.1Ti rotor (Beckman Coulter). Afterwards ...
-
bioRxiv - Microbiology 2024Quote: ... The cells were collected by centrifugation (8,000 rpm, 10 minutes at 4°C, JLA-10.500 rotor (Beckman Coulter)) ...
-
bioRxiv - Cell Biology 2021Quote: ... then finally at 100,000 g for 4 h at 4 ℃ using an SW28 rotor (Beckman Coulter, Fullerton, CA, USA). The pelleted exosomes were collected then subsequently resuspended in PBS ...
-
bioRxiv - Cell Biology 2021Quote: ... Hettich) at 4°C and then centrifuged at 40000 rpm for 4h30 at 4°C using SW41Ti rotor (Beckman). The supernatant was then UV inactivated at a wavelength of 254 nm for 4 min (3 times ...
-
bioRxiv - Microbiology 2023Quote: ... The lysates containing matured PsVs were loaded on an OptiPrep gradient that had been stabilized at least 1 h and centrifuged at 50k x g for 3.5-4 h at 4°C in a SW-55Ti rotor (Beckman). Fractions were collected in siliconized tubes and subjected to SDS-PAGE followed by Coomassie blue staining to assess the abundance of L1 and L2 proteins ...
-
bioRxiv - Genetics 2024Quote: ... and spun at 70,000 rpm for 4 hours at 4°C using a TLA 100.3 Rotor in an Optima Ultracentrifuge (Beckman, 361889). After centrifugation ...
-
bioRxiv - Microbiology 2024Quote: ... and the remainder was then loaded onto a 20%-60% sucrose cushion and centrifuged at 25,000 rpm at 4°C for another 4 hours using the SW41 rotor (Beckman). The initial 5 μL sample and each sucrose gradient layer were then absorbed ...
-
bioRxiv - Microbiology 2024Quote: ... The lysates containing matured PsVs were loaded on an OptiPrep gradient that had been stabilized at least 1 h and centrifuged at 50k ×g for 3.5-4 h at 4°C in a SW-55Ti rotor (Beckman). Fractions were collected in siliconized tubes and subjected to SDS-PAGE followed by Coomassie blue staining to assess the abundance of L1 and L2 proteins ...
-
bioRxiv - Biochemistry 2020Quote: ... mixed for 10 minutes at 4°C and centrifuged at 25,000 rpm for 45 minutes (Beckman Ti-45 rotor). The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor ...
-
bioRxiv - Biochemistry 2020Quote: ... Cells were collected by centrifugation (8 000 rpm for 10 min at 4 °C, JLA-16.25 Beckman Coulter rotor), pellets frozen in liquid nitrogen and stored at −80°C ...
-
bioRxiv - Microbiology 2020Quote: ... Supernatant was transferred to a fresh tube and further clarified by centrifugation at 18,000 x g for 10 min at 4°C in a microfuge (Beckman), and supernatant transferred to a fresh tube.
-
bioRxiv - Microbiology 2020Quote: ... Cell lysate was then clarified 200 x g for 10 min at 4°C in an Allegra centrifuge (Beckman). Supernatant was transferred to a fresh tube and further clarified by centrifugation at 18,000 x g for 10 min at 4°C in a microfuge (Beckman) ...
-
bioRxiv - Genetics 2022Quote: ... The lysate was centrifuged at 2000 rpm for 10 min at 4 °C in a JA-20 rotor (Beckman). The supernatant from the previous step was centrifuged in a Beckman Coulter high speed centrifuge equipped with a JA-20 rotor at 6000 rpm for 20 min at 4 °C ...