Labshake search
Citations for Beckman :
101 - 150 of 1265 citations for rno mir 16 Real time RT PCR Detection Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Evolutionary Biology 2023Quote: ... PCR clean-up was performed with Agencourt AMPure XP PCR Purification beads (Beckman Coulter Life Sciences ...
-
bioRxiv - Immunology 2021Quote: ... and 1 mM TCEP and centrifuged for 16 h at 40,000 rpm (MLS-50 swinging-bucket rotor, Beckman). Fractions of 750 μl were collected manually and NLRP3-containing fractions were merged and buffer-exchanged with Zeba™ spin desalting columns (fisher Scientific ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... Gradients were centrifuged at 49,100g for 16 to 17 hrs at 4°C in an SW32Ti rotor (Beckman). Gradients were fractionated using a Brandel (UV ...
-
bioRxiv - Biophysics 2022Quote: ... Gradients were centrifuged at 28,000 rpm (97,000 xg) for 16 hours in a SW-32 rotor (Beckman-Coulter). An ISCO gradient fraction system was used to isolate the 70S fraction (Figure S13).
-
bioRxiv - Cancer Biology 2023Quote: ... Following centrifugation at 50,000 rpm for 16 hours at 4 °C in SW 55 Ti Rotor (Beckman Coulter), fractions (100 μL each ...
-
bioRxiv - Molecular Biology 2023Quote: ... for 16 minutes at 15,000 rpm and the supernatant was subsequently spun in a 70.1 Ti rotor (Beckman) for 45 minutes at 50,000 rpm to pellet ribosomes and heavy molecular weight complexes ...
-
bioRxiv - Microbiology 2024Quote: ... The eluent was ultracentrifuged (100,000 ×g, 4°C, 16 h) using Optima L-100 XP Ultracentrifuge (Beckman Coulter) to sediment ribosomes.
-
bioRxiv - Cell Biology 2020Quote: ... the samples were thawed at RT and transferred to centrifuge tubes (357003, Beckman Coulter) and centrifuged at 10 000 g in an Avanti J-26 XPI centrifuge (Beckman Coulter ...
-
bioRxiv - Microbiology 2020Quote: ... PCR product was purified using AMPure XP for PCR Purification (Beckman Coulter Indianapolis, IN), quantified using Qubit dsDNA HS Assay Kit (ThermoFisher Waltham ...
-
bioRxiv - Neuroscience 2022Quote: ... PCR products were purified using the AMPure XP PCR purification system (Beckman Coulter, A63881) and the 96S Super Magnet (Alpaqua ...
-
bioRxiv - Genomics 2023Quote: ... the PCR products were isolated using an AMPure XP PCR purification beads (Beckman Coulter). Indexed amplicons were then generated using a Nextera XT DNA Library Prep Kit (Illumina ...
-
bioRxiv - Bioengineering 2024Quote: ... the PCR products were isolated using an AMPure XP PCR purification beads (Beckman Coulter). Indexed amplicons were then generated with a Nextera XT DNA Library Prep Kit (Illumina ...
-
bioRxiv - Molecular Biology 2022Quote: ... Samples were tagged using barcodes NB01 to NB05 of the Native Barcoding Expansion 1-12 PCR-free kit (EXP-NBD104, ONT) and purified using Agencourt AMPure XP beads (Beckman Coulter). The barcoded samples were quantified using a Qubit fluorometer and pooled equimolarly to reach 700 ng in 65 μL ...
-
bioRxiv - Genomics 2019Quote: ... The resulting PCR reactions were pooled and purified (first using the minElute PCR purification kit of Qiagen, followed by an extra purification step using AMPureXP beads of Beckman Coulter), and the amplified cDNA quantified on a BioAnalyzer High Sensitivity Chip (Agilent) ...
-
bioRxiv - Molecular Biology 2020Quote: ... The amplified DNA was purified using a Qiagen MinElute PCR Purification Kit and primer dimers (<100 bp) were removed using AMPure beads (Beckman Coulter). ATAC-Seq was performed with two biological repeats to ensure the robustness of the data sets ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... The PCR amplicons of the samples were then pooled after a purification and concentration equalization process with the AMPureXP Kit (Beckman Coulter). The libraries were processed in an Illumina MiSeq v2 (500 cycles and paired-end).
-
bioRxiv - Evolutionary Biology 2024Quote: ... PCR products were purified using Qiagen MinElute PCR purification kit and size-selected (∼30-280 bp) using Ampure XP beads (Beckman Coulter). Reporter plasmid libraries were made by cloning amplified ATAC fragments into AgeI-HF- and SalI-HF-linearized pSTARR-seq plasmid using InFusion HD cloning kit (Takara ...
-
bioRxiv - Microbiology 2024Quote: ... The PCR products from thew first PCR were individually purified using 0.6X volumes of AMPure XP magnetic beads (AMPure XP beads kit / Beckman coulter, USA), followed by a second PCR reaction to attach the dual indices (S5 and N7 ...
-
bioRxiv - Immunology 2023Quote: ... Final PCR reaction was then purified with a MinElute PCR Purification Kit followed by size-selection (150bp-1000bp using Ampure XP beads, Beckman Coulter). Sequencing was performed using a MGISEQ-2000 (BGI Tech Solutions) ...
-
bioRxiv - Molecular Biology 2020Quote: ... Fragmented native chromatin was loaded on top of the 9 ml 5% to 40% sucrose gradients and centrifuged for 16 h and 30 min at 37,500 rpm in a SW50.1 ultracentrifuge rotor (Beckman Coulter). Following centrifugation ...
-
bioRxiv - Microbiology 2021Quote: ... Filtered supernatants were pelleted at 60,000 g for 16 hours at 4 °C in a SW28 Ti rotor (Beckman), and the resulting pellet was resuspended in TNE buffer (50 mM Tris-HCl [pH 7.4] ...
-
bioRxiv - Biochemistry 2021Quote: ... The gradient was centrifuged at 100,000 g for 16 hours at 4°C (rotor MLS-50, Beckman Optima MAX). Twelve fractions of 400 μL were collected from the top of the gradient and pelleted by UC at 100,000 g for 2 hours at 4°C (Figure 1) ...
-
bioRxiv - Biochemistry 2021Quote: ... and 10 mM NH4Cl) and centrifuged for 16 h at 4°C with 18,000 rpm in an SW60Ti rotor (Beckman). Gradients were hand-fractionated and ribosome concentrations were determined by absorbance at 260 nm (A260 ...
-
bioRxiv - Neuroscience 2023Quote: ... The prepared gradients were centrifuged at 200,000 x g for 16 h at 4°C in an SW41Ti rotor (Beckman), with no braking during deceleration ...
-
bioRxiv - Biochemistry 2022Quote: ... The tubes were then centrifuged at 150,000xg for 16 h in an SW41 Ti swinging-bucket rotor (Beckman Coulter). After centrifugation ...
-
bioRxiv - Cell Biology 2023Quote: ... Gradients were spun at 45,000 RPM for 16 hours at 4°C in SW55Ti rotor using an ultracentrifuge (Beckman). After centrifugation ...
-
bioRxiv - Cell Biology 2023Quote: ... Solutions of 15% and 23% Optiprep were layered on top or below the sample and centrifuged at 4°C for 16 h at 120,000g in a SW 28 Ti swinging bucket rotor (Beckman).
-
bioRxiv - Microbiology 2023Quote: ... The growth curves were measured at OD595 using the PARADIG detection platform (Beckman, United States) or Sunrise absorbance microplate reader (Tecan ...
-
bioRxiv - Developmental Biology 2023Quote: ... Five PCR cycles were run and PCR products were purified using AMPure XP reagent (Beckman Coulter Life Sciences ...
-
bioRxiv - Molecular Biology 2024Quote: ... PCR cleanup was performed after the final PCR step by AMPure XP beads (Beckman Coulter). The concentration and purity of final PCR products was determined by Qubit and Bioanalyzer2100.
-
bioRxiv - Biophysics 2023Quote: ... the solution was centrifuged at 3500 rpm (Sorvall Legend RT, Beckman Coulter Inc. Indianapolis, IN), the supernatant oil phase was carefully removed ...
-
bioRxiv - Biophysics 2023Quote: ... the solution was centrifuged at 3500 rpm (Sorvall Legend RT, Beckman Coulter Inc. Indianapolis, IN), the oil phase was carefully removed ...
-
bioRxiv - Microbiology 2020Quote: ... The PCR products were purified with the kit from Agencourt AMPuer XPsystem (Cat. No. A63880, Beckman Coulter, South San Francisco, CA, USA), and the purified products were used with the second PCR amplification ...
-
bioRxiv - Microbiology 2022Quote: ... The V4 region of 16S rRNA gene was amplified using the universal primer set 515F and 806R.27 PCR products were cleaned up with an AMPure XP kit (Beckman Coulter, CA), followed by electrophoresis on 0.7% agarose gel and 1.15% Synergel (Diversified Biotech ...
-
bioRxiv - Biochemistry 2021Quote: ... 10 U/mL SuperASE-In and was ultracentrifuged at 100,000 × g for for 16 h at 4 °C in a SW Ti41 rotor (Beckman Coulter). After removing the supernatant ...
-
bioRxiv - Microbiology 2019Quote: ... Samples were centrifuged at 27,000 x rpm for 16 hrs at 4°C in an Optima L-100 XP ultracentrifuge (Beckman Coulter) using a SW32Ti rotor.
-
bioRxiv - Molecular Biology 2021Quote: ... The samples were centrifuged at 34,000 rpm at 4°C for 16 h using an SW60 Ti rotor (Beckman Coulter). Subsequently ...
-
bioRxiv - Microbiology 2020Quote: ... the sample was centrifuged for 16 h at 4°C and 100,000 rcf using a type 70 Ti rotor (Beckman Coulter). The pellet was gently washed with 500 μl of storage buffer (lysis buffer C + 10% (v/v ...
-
bioRxiv - Genetics 2021Quote: ... The sheared DNA fragments were then purified for each of the 16 mice strains using AMPure XP Beads (Beckman, USA), following the instructions of the reagent supplier.
-
bioRxiv - Molecular Biology 2021Quote: ... Ultra-centrifugation was performed (160,000 x g; 16 hours; 4°C; SW 32 Ti rotor; Optima XPN-80, Beckman Coulter) and 1mL fractions were collected and analyzed by BN-PAGE ...
-
bioRxiv - Developmental Biology 2020Quote: ... Samples were loaded onto 10-45% CHX supplemented sucrose gradients in 9/16 x 3.5 PA tubes (Beckman Coulter, #331372) and spun at 35,000 x g in SW41 for 3 hours at 4°C ...
-
bioRxiv - Biochemistry 2019Quote: ... Ribosomes were pelleted via centrifugation at 63,000 x g for 16-18 hours at 4°C using a Type 80 Ti rotor (Beckman Coulter). Ribosome pellets were dissolved in resuspension buffer (20 mM Tris-HCl pH 7.5 ...
-
bioRxiv - Cell Biology 2019Quote: ... the extracted proteins were dialyzed into NaLow and then were loaded onto a 5-20% sucrose gradient made in NaLow buffer and centrifuged at 35,000 rpm for 16 h in a SW41Ti rotor (Beckman Coulter). Gradients were fractionated (0.5 ml fractions ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... Ribosomes were pelleted by centrifugation at 63,000g for 16–19 hrs at 4°C using a Type 80 Ti rotor (Beckman Coulter). For all ultracentrifugation steps indicated here ...
-
bioRxiv - Developmental Biology 2022Quote: ... Samples were loaded onto 10-45% CHX supplemented sucrose gradients in 9/16 x 3.5 PA tubes (Beckman Coulter, #331372) and spun at 35,000 x g in an SW41 rotor for 3 hours at 4°C ...
-
bioRxiv - Cell Biology 2022Quote: ... 4–40% sucrose gradient prepared in lysis buffer and centrifuged at 150,000 × g for 4 or 16 h at 4°C in a MLS-50 rotor (Beckman Coulter). Thereafter ...
-
bioRxiv - Physiology 2023Quote: ... Samples were ultracentrifuged at 100,000 rpm at 16°C for 2 hours (rotor: Beckman TLA-100; Centrifuge: Beckman Optima TLX). 100ul from the top of the tube was collected as VLDL fraction ...
-
bioRxiv - Cell Biology 2023Quote: ... down to 6 ml and ultracentrifuged at 10,000xg for 16 min at 4°C in MLA-80 rotor (Beckman Coulter). The pellet was resuspended and washed with PBS at the same conditions (volume ...
-
bioRxiv - Biophysics 2023Quote: ... The isolated crude membrane extract was loaded on the continuous 20-70 % sucrose density gradient in 20 mM NaH2PO4/Na2HPO4 pH 7.4 and 100 mM NaCl prepared by the Gradient Station (Biocomp) and centrifuged for 16 h at 30.000 rpm (rotor SW 40 Ti, Beckman Coulter). The gradients were collected with the Gradient Station ...
-
bioRxiv - Microbiology 2024Quote: ... The resulting gradient was then subjected to centrifugation for 16 hours at 150,000 x g and 4 °C (SW55 Ti rotor, Beckman-Coulter). Sample banding was visually observed at the interface of the 30% and 20% fractions (Supporting Information ...