Labshake search
Citations for Beckman :
501 - 550 of 844 citations for Urea Nitrogen BUN Detection Kit 10 Plate since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2022Quote: ... was added before ultracentrifugation at 20,000 × g for 2 hours at 10°C in an Optima L-90K Ultracentrifuge with the SW32Ti rotor (Beckman Coulter). Supernatants were carefully discarded by aspiration and the 6 phage pellets were resuspended with 0.1 ml of TM buffer (50 mM Tris-HCl ...
-
bioRxiv - Genomics 2019Quote: ... Resulting cDNA was purified by a 10 min incubation with 144 µl (1.8X) Agencourt AMPure XP beads (A63880, Beckman Coulter), 2x 200 µl washes with 80% ethanol for 30 sec each ...
-
bioRxiv - Genomics 2019Quote: ... Resulting DNA was purified by a 10 min incubation with 70 µl (0.7X) Agencourt AMPure XP beads (A63880, Beckman Coulter), 2x 200 µl washes with 80% ethanol for 30 sec each ...
-
bioRxiv - Microbiology 2020Quote: VLPs were collected after removal of cells from the enrichment culture (7,000 rpm, 20 min, Sorvall 1500 rotor) and concentrated by ultracentrifugation (40,000 rpm, 2h, 10°C, Beckman SW41 rotor). The particles were resuspended in buffer A ...
-
bioRxiv - Developmental Biology 2020Quote: ... Samples were loaded onto 10-45% CHX supplemented sucrose gradients in 9/16 x 3.5 PA tubes (Beckman Coulter, #331372) and spun at 35,000 x g in SW41 for 3 hours at 4°C ...
-
bioRxiv - Cell Biology 2019Quote: ... and spun down at 4° C for 10 minutes at 12096×g using an Avanti J-25 centrifuge (Beckman Coulter). The sonicated lysate was incubated for 2 hours at 4 ° C with beads (Glutathione High Capacity Magnetic Agarose Beads ...
-
bioRxiv - Biochemistry 2019Quote: ... The supernatant was then slowly mixed with an equal volume of 4 M ammonium sulphate (2 M final concentration) at 4°C for 1 hour and spun at 10 K rpm using a JA-17 rotor (Beckman). Pellets containing RAD51 were suspended in 25 ml of resuspension buffer (0.5 M KCl ...
-
bioRxiv - Biochemistry 2019Quote: ... The supernatant from 2,000 × g was transferred to 30mL conical tube and then centrifuged at 10,000 × g for 10 min at 4°C (# Avanti J-E JA25-50 Beckman Coulter). The supernatant from this spin was filtered through a 0.22-μm mesh filter (# SLGP033RS EMD Millipore ...
-
bioRxiv - Genomics 2019Quote: ... A pool of seven gDNA extractions from fragment section 3_10-10 was re-purified with AMPure XP Beads (Agencourt, Beckman Coulter) and eluted in 50ul of water ...
-
bioRxiv - Plant Biology 2020Quote: ... the cells were harvested by centrifuging for 30 min at 4°C and 6,000 rpm (JA-10, Beckman Coulter®). The cells were resuspended in 1x PBS (pH 7.3 ...
-
bioRxiv - Bioengineering 2020Quote: ... microbubbles rested for 10 min before the suspension was mixed and diluted to 0.2% v/v in Isoton (Beckman-Coulter). For each vial ...
-
bioRxiv - Biochemistry 2019Quote: ... The homogenate was centrifuged for 10 min at 10,000×g at 4°C in a Ti-70 rotor and Optima XPN-90 ultracentrifuge (Beckman Coulter) and the supernatant was removed ...
-
bioRxiv - Microbiology 2020Quote: ... diluted to 20 mL with PBS and pelleted through a cushion of 10% sucrose in PBS to further clean and concentrate the sample (SW32 Beckman centrifuge tube at 25,000 rpm at 4°C for 2 h) ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The pellet was resuspended in 60% Percoll in STE and loaded on the bottom of six 10-35% Percoll gradient in STE in polycarbonate tubes for SW28 rotor (Beckman). Gradients were centrifuged for 1 hour at 24000 rpm ...
-
bioRxiv - Immunology 2021Quote: ... Cells were stained with following antibody mix for 30 minutes on ice: pan-γδTCR-PE (1:10; IMMU510; Beckman Coultier) and CD69-APC (1:25 ...
-
bioRxiv - Genomics 2022Quote: ... Lysates were fractionated on a 10% to 60% sucrose gradient using the SW 41 Ti Swinging-Bucket Rotor (Beckman Coulter) at 36,000 rpm for 3 h and 10 min ...
-
bioRxiv - Cancer Biology 2022Quote: ... step gradients were made by superposing sucrose solutions of different concentration (50%, 40%, 30%, 20%, 10%) in an ultra-clear polycarbonate tube (Beckman), and a linear gradient was allowed to form overnight at 4 °C ...
-
bioRxiv - Cell Biology 2022Quote: ... The lysate was dounced for 10 strokes on ice and cleared via centrifugation at 80K rpm for 10 minutes at 4°C using a TLA 110 rotor (Beckman) in a tabletop Beckm an ultracentrifuge ...
-
bioRxiv - Developmental Biology 2022Quote: ... Samples were loaded onto 10-45% CHX supplemented sucrose gradients in 9/16 x 3.5 PA tubes (Beckman Coulter, #331372) and spun at 35,000 x g in an SW41 rotor for 3 hours at 4°C ...
-
bioRxiv - Cancer Biology 2023Quote: ... The ribosomes with equal A260 in each group were loaded onto a sucrose gradient (10–50%) buffer prepared using a gradient station and centrifuged in an SW41Ti rotor (Beckman) at 4°C for 4 hours at 28,000 rpm ...
-
bioRxiv - Cell Biology 2023Quote: ... The density adjusted FBS was subjected to ultracentrifugation for 25 h at 310,500 x g at 10°C in a 70Ti rotor (Beckman Coulter) before dialysis ...
-
bioRxiv - Immunology 2023Quote: ... at 950 rpm for 10 min at 20°C and centrifuged at 15,000 rpm (Beckman Coulter Microfuge® 22R refrigerated microcentrifuge, Beckman Coulter Australia Pty Ltd ...
-
Comparative membrane proteomics reveals diverse cell regulators concentrated at the nuclear envelopebioRxiv - Cell Biology 2023Quote: ... The whole cell homogenate was layered on top of 2 ml shelf of 0.8 M sucrose in HB and centrifuged at 2000 rpm for 10 min at 4°C in a JS5.2 rotor (Beckman Coulter) to yield a low speed nuclear pellet and a postnuclear supernatant ...
-
bioRxiv - Cancer Biology 2023Quote: Cell death was evaluated 48 hrs after ionizing radiation (10 Gy) by using a CytoFLEX S (Beckman Coulter, Milan, Italy) instrument ...
-
bioRxiv - Genomics 2023Quote: ... the supernatant was cleared by two rounds of centrifugation at 20,000 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter) followed by centrifugation at 31,900 ×g (10 min ...
-
bioRxiv - Genomics 2023Quote: ... Precipitated ribosomes were pelleted at 20,000 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter). To remove residual supernatant the pellet was re-centrifuged for 5 min at 20,000 ×g ...
-
bioRxiv - Genomics 2023Quote: ... The suspension was incubated on ice for 5 min and centrifuged at 20,000 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter). The pellet was re-centrifuged for 5 min and both supernatants were combined into a new tube ...
-
bioRxiv - Molecular Biology 2023Quote: ... using the Illumina 16S Metagenomic Sequencing Library Preparation Protocol with the following changes: 10 μL of Amplicon product was purified using a 1:0.8 ratio of XP beads (Beckman Coulter), with beads resuspended in a final volume of 10 μL of nuclease-free water ...
-
bioRxiv - Molecular Biology 2024Quote: ... the mixture was spun at 13,894 rpm (16,000 rcf) at 4 ºC for 10 min using the SX241.5 rotor in an Allegron X-30R centrifuge (Beckman Coulter). The beads that accumulated at the bottom of the tube were resuspended in 200 µL of EM buffer A ...
-
bioRxiv - Plant Biology 2024Quote: ... using a standard protocol but with all reaction volumes reduced by 1/10 to accommodate the automation of the prep on the Echo LabCyte liquid handler (Beckman). Libraries were purified using Agencourt Ampure XP beads (Beckman Coulter) ...
-
bioRxiv - Cell Biology 2020Quote: ... Samples were pelleted at 280’000 x g for 10 min at 25 °C in an Optima XP centrifuge with a TLA-100 rotor (Beckman-Coulter). Supernatant and pellet fractions were separated on a 10 % SDS-PAGE gel and proteins were visualized by Coomassie Blue staining ...
-
bioRxiv - Molecular Biology 2021Quote: ... About 1,5 mg of protein was loaded on a 10–50% sucrose gradient and centrifuged for 2h45min at 39 000 rpm in an Optima L-100XP Ultracentrifuge (Beckman-Coulter) using a SW41 rotor (Beckman) ...
-
bioRxiv - Cell Biology 2022Quote: ... Yeast cells were stained with 5ug\ml propidium iodide for 10 minutes and samples were examined in CytoFlex flow cytometer (Beckman Coulter) using PE channel ...
-
bioRxiv - Molecular Biology 2021Quote: ... pombe cells were pelleted down for 10 min at 5000 rpm at 4°C (Rotor: F10-6X500, FiberLite Beckman J2-MC). The pellet was washed with buffer 1 (HEPES- 20 mM ...
-
bioRxiv - Molecular Biology 2020Quote: ... and centrifuged through a 10–35% sucrose gradient for 19 h at 16,000 rpm in a SW28 rotor (Beckman Coulter, Inc.). Fractions containing the 70S peaks were pooled and kept at −80℃ for further use.
-
bioRxiv - Bioengineering 2022Quote: ... The 60-70 mL were then divided equally into two 50-mL centrifuge tubes and spun down outside the anaerobic chamber at 4 °C and 3500 rpm for 10 min using an Allegra 64R ultracentrifuge (Beckman Coulter). Next ...
-
bioRxiv - Bioengineering 2022Quote: ... Each 250 mL culture was divided equally into six 50-mL centrifuge tubes and spun down at 4 °C and 3500 rpm for 10 min using an Allegra 64R centrifuge (Beckman Coulter). The supernatant was discarded and 6 mL of ice-cold 10% glycerol was used to wash and combine the six cell pellets into one suspension ...
-
bioRxiv - Genetics 2020Quote: ... The homogenates were incubated on ice for 15–20 min and then centrifuged at 3000xg for 10 min at 4°C in a GPR Data Settop centrifuge (Beckman, Inc.). The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042 ...
-
bioRxiv - Cell Biology 2021Quote: ... The sample was overlaid with decreasing concentrations of Nycodenz (30%, 20%, 10% and 0%) and centrifuged in a SW55 rotor (Beckman Coulter) 2h 30 min at 55000 rpm and 4°C ...
-
bioRxiv - Plant Biology 2021Quote: ... Counting was performed twice for each sample (10 min per sample) with a ß-scintillation counter Beckman LS6000TA (Beckman Coulter, USA). Roots of two plants identically grown and processed but not exposed to the incubation solution were used to determine background counts ...
-
bioRxiv - Cell Biology 2022Quote: ... which was then slowly poured on top of 10 ml cushion solution (2.05M sucrose with protease inhibitors, DTT and PMSF) in the ultracentrifugation tube (Beckman polyallomer #326823). After a 45-min spin at 24,600 rpm in pre-chilled SW32Ti rotor at 4°C ...
-
bioRxiv - Cancer Biology 2022Quote: ... Putative LSC-enriched populations were isolated from freshly expanded MLL-AF9 mouse leukemia cells by sorting c-Kithigh (top 10%) cells on a MoFlo XDP cell sorter (Beckman Coulter). Sorted cells were plated in triplicate in semi-solid methylcellulose medium (Methocult M3434 ...
-
bioRxiv - Neuroscience 2020Quote: ... the homogenized solution was added onto a sucrose cushion (2 ml) in a 10 ml Ultra-Clear centrifuge tube (Beckman Coulter). Separation of nuclei from the tissue was done by centrifugation (26.500xg at 4°C for 1.5 h ...
-
bioRxiv - Genetics 2022Quote: ... A final DNase treatment was performed in 50 μL total volume using 1 μL of Turbo DNase incubated for 4 hours at 37°C followed by inactivation with 1 μL of 10% SDS and purification using RNA Ampure XP beads (Beckman Coulter).
-
bioRxiv - Immunology 2020Quote: ... cryopreserved PBMC were recovered overnight in RPMI1640 supplemented with 10% FBS and washed in cold phosphate buffer (PBS) before suspended in cold PBS and sorted on Moflo Astrios (Beckman Coulter). The excitation wavelength for the generation of side-scatter (488/6-nm filter ...
-
bioRxiv - Molecular Biology 2020Quote: ... the lysate was incubated under rotation for 30 min at 4 °C and cleared for 10 min in an MLA-80 rotor (Beckman Coulter) at 11,500 xg and 4 °C ...
-
bioRxiv - Molecular Biology 2020Quote: ... The assembled complexes were incubated for 5 min at 30 °C and for 10 min on ice before they were loaded on a 30% (w/v) sucrose cushion in TLA-100 tubes (Beckman Coulter). The sucrose cushions were centrifuged for 2 h at 390,880 xg and 4 °C ...
-
bioRxiv - Biochemistry 2020Quote: ... The equivalent of 200 µl of cell extract with an OD260 of 12 was loaded onto a 10–50% sucrose gradient and centrifuged in a SW41 rotor (Beckman Coulter) at 39,000 rpm for 2.45 h at 4°C ...
-
bioRxiv - Synthetic Biology 2021Quote: ... The complete NanoTrap was purified using rate-zonal centrifugation33 through a 1545% glycerol gradient in 1×TE + 10 mM MgCl2 in an SW 55 rotor (Beckman Coulter). Fractions were collected after a 1 hr centrifugation at 50 k rpm ...
-
bioRxiv - Systems Biology 2020Quote: ... the 500xg supernatant was first spun at 10,000xg for 10 minutes at 4°C (Beckman Coulter, fixed angle rotor TLA 120.2) in 1 ml 11×34 mm polycarbonate uncapped centrifuge tubes (Beckman Coulter 343778) ...