Labshake search
Citations for Beckman :
401 - 450 of 1490 citations for Tetanus Toxoid Recombinant Heavy Chain Fragment C since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cancer Biology 2022Quote: Sorting of Sca-1 and c-Kit double positive population by Beckman Coulter MoFlo Astrios EQ Cell Sorter shown in the dotted shade box is considered optional ...
-
bioRxiv - Immunology 2023Quote: ... After adding 200 μL of optiLyse C Lysing solution (Beckman Coulter, France), the samples were analyzed with a Beckman Coulter flow cytometer using FlowJo X software ...
-
bioRxiv - Immunology 2023Quote: ... After adding 600 μL of optiLyse C Lysing solution (Beckman Coulter, France), the samples were then fixed and permeabilised ...
-
bioRxiv - Cell Biology 2023Quote: ... for 20 hours at 4 °C in an ultracentrifuge (LE-80K, Beckman). The centrifuged medium was diluted with serum-free Opti-MEM supplemented with penicillin/streptomycin to a final concentration of 10% BGS and filtered using the Stericup-VP Sterile Vacuum Filtration System with a 0.1 µM PES filter (Merck) ...
-
bioRxiv - Neuroscience 2023Quote: ... 4°C for 30 minutes in an OptimaTM MAX Ultracentrifuge (Beckman, Germany). Supernatant was collected and stored at -80°C ...
-
bioRxiv - Immunology 2023Quote: ... After centrifugation at 100,000xg for 16 hat 4°C (Beckman Ti50.2 rotor), the density of each fraction was measured ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... Final ultracentrifugation step at 100,000g/1hour/4°C (Beckman AirFuge CLS Ultracentrifuge) resulted in pellets which were resuspended in the same buffer (66) ...
-
bioRxiv - Immunology 2023Quote: ... After adding 200 μL of optiLyse C Lysing solution (Beckman Coulter, France), the samples were fixed and permeabilised (BD Biosciences) ...
-
bioRxiv - Cell Biology 2023Quote: ... Gradients were centrifuged at 200,000xg for 16 h at 4°C (Beckman–Coulter Optima™ MAX–E centrifuge ...
-
bioRxiv - Cell Biology 2023Quote: ... EVs were pelleted at 200,000xg for 60 min at 4°C (Beckman–Coulter Optima™ L–90K or Optima™ XPN–80 centrifuge ...
-
bioRxiv - Neuroscience 2023Quote: ... and spun at 4°C in a fixed vertical rotor (VTi50, Beckman) at 242,000 g for 47 min to achieve subcellular fractionation.
-
bioRxiv - Neuroscience 2020Quote: ... The number and size distribution of the clot fragments that break off the thrombus during thrombectomy are quantified using a Coulter counter (Beckman Multisizer 4, Brea, California). Each removal technique is repeated 8 times for each clot type ...
-
bioRxiv - Microbiology 2021Quote: ... adapters were converted to the ‘Y’ shape by treating with USER enzyme and DNA fragments were size selected using Agencourt AMPure XP beads (Beckman Coulter, Indianapolis, IN, USA) to generate fragment sizes between 500 and 700 bp ...
-
bioRxiv - Neuroscience 2021Quote: ... Samples were centrifuged at 135,000 × g for 1 hr at 4°C (Beckman OptimaTM Max centrifuge ...
-
bioRxiv - Genomics 2019Quote: ... the Promoter CHi-C libraries were purified with AMPure XP beads (Beckman Coulter). The concentration of the Promoter CHi-C libraries was determined by Bioanalyzer profiles (Agilent Technologies) ...
-
bioRxiv - Genetics 2019Quote: ... The Hi-C libraries were purified with AMPure XP beads (Beckman Coulter, A63881) and sequenced using an Illumina sequencing platform.
-
bioRxiv - Biochemistry 2019Quote: ... Induced cultures were grown at 18 °C overnight before harvesting by centrifugation (Beckman JLS 8.100 rotor ...
-
bioRxiv - Biochemistry 2019Quote: ... Induced cultures were grown at 18 °C overnight before harvesting by centrifugation (Beckman JLS 8.100 rotor ...
-
bioRxiv - Microbiology 2019Quote: ... 4°C in an ultracentrifuge (SW 40 Ti swing bucket rotor, Beckman Coulter). Gradient fractions were removed from the top in 1 mL aliquots ...
-
bioRxiv - Cell Biology 2021Quote: ... Beads were centrifugated at 1000 g for 5 min at 4°C (Beckman Coulter Microfuge 22R ...
-
bioRxiv - Biochemistry 2020Quote: ... cells were harvested by centrifugation (6000 rpm, JA10, 20 min, 4 °C, Beckman). The pellet was re-suspended in 15-20 ml of 50 mM NaH2PO4 ...
-
bioRxiv - Cell Biology 2020Quote: ... 4 °C for 38 min with MLA-50 rotor (Beckman Coulter, California, USA). The top layer and the subsequent 10 fractions (fraction 1-10 ...
-
bioRxiv - Microbiology 2019Quote: ... 4°C in an ultracentrifuge (SW 40 Ti swing bucket rotor, Beckman Coulter). Gradient fractions were removed from the top in 1 mL aliquots ...
-
bioRxiv - Biochemistry 2020Quote: ... centrifuged at 90,000 rpm for 10 min at 4°C (TLA120.1 Beckman Coulter), and then polymerized by incubation at 37°C for 30 mins ...
-
bioRxiv - Microbiology 2021Quote: ... centrifuged at 42,000 rpm for 45 minutes at 4 °C (45Ti rotor; Beckman), and the resulting total membrane fraction was homogenized in TBS buffer containing 1.5% Lauryl-dimethylamine oxide (LDAO ...
-
bioRxiv - Cell Biology 2022Quote: ... Gradients were ultracentrifuged at 192,000xg for 16 - 18 hours at 4°C (Beckman Coulter Optima XPN-80 with a SW40Ti rotor) ...
-
bioRxiv - Biochemistry 2023Quote: ... 4 °C in a Allegra X-15R centrifuge (Swinging bucket rotor, Beckman Coulter). The cell pellet was resuspended in 10 ml 20 mM Tris pH 7.5 and passed once through a French press at 120 MPa ...
-
bioRxiv - Biophysics 2023Quote: ... alternated by centrifugation at 10°C and 6500 rpm (Beckman Coulter JLA 16.250). Enumeration of bacteria in the suspension was quantified with a Bürker-Türk counting chamber.
-
bioRxiv - Genetics 2023Quote: ... the PCHi-C libraries were purified with AMPure XP beads (Beckman Coulter #A63881) and paired-end sequenced (HiSeq 1000 ...
-
bioRxiv - Biochemistry 2024Quote: ... at 4°C for 128 min using a SW 40Ti rotor (Beckman Coulter). After centrifugation ...
-
bioRxiv - Microbiology 2021Quote: ... Any amplicon contaminated with traces of non-specific fragments was further purified using the Agencourt AMPure™ PCR purification kit (Beckman Coulter, Beverly, MA, USA). The concentration of each PCR amplicon was determined using the Quant-iT™ PicoGreen kit (Invitrogen ...
-
bioRxiv - Microbiology 2019Quote: ... Each PCR amplicon was cleaned twice to remove the primers and short DNA fragments using the Agencourt AMPure XP system (Beckman Coulter, Inc., Brea, CA, USA) and quantified using a Qubit Fluorometer (Invitrogen Corporation ...
-
bioRxiv - Microbiology 2021Quote: ... Each PCR amplicon was cleaned twice to remove the primers and short DNA fragments using the Agencourt AMPure XP system (Beckman Coulter, Inc., Brea, CA, USA) and quantified using a Qubit Fluorometer (Invitrogen Corporation ...
-
bioRxiv - Cell Biology 2020Quote: ... followed by serial centrifugation at 100’000 g for 120 min at 10 °C (Beckman fixed-angle TL110 rotor ...
-
bioRxiv - Cell Biology 2020Quote: ... for 15 min at 37°C before analysis using CytoFLEX (Beckman Coulter Life Science). Treatment with 10 µM valinomycin for 30 min was included prior to JC-1 incubation as a depolarising control ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... 40 min at 20 000 g (8 °C, 11 300 RPM, Beckman JA-13.1) to run a 30 ml 20% Percoll purification (in 250 mM Sorbitol ...
-
bioRxiv - Microbiology 2020Quote: ... pH 7.4) and centrifuged at 182,000g for 1.5 h at 4°C (Beckman SW40). Then the lipid droplets on the top were collected and washed for further analysis.
-
bioRxiv - Pharmacology and Toxicology 2019Quote: ... Particle size was measured using dynamic light scattering (DLS; DelsaNano C by Beckman Coulter) where 50 μl of the reaction mixture was taken and added to 5 ml of ethanol which was then centrifuged for 2 minutes before 100 μl of the supernatant was used for DLS analysis ...
-
bioRxiv - Cell Biology 2021Quote: ... at 4°C using the SW 55 Ti Swinging Bucket rotor (Beckman Coulter, 342194).
-
bioRxiv - Molecular Biology 2022Quote: ... After centrifugation at 6000 g for 15 min at 4 °C (JA14 rotor-Beckman), the cell pellet is resuspended with cold lysis buffer (1mg/ml lysozyme ...
-
bioRxiv - Microbiology 2020Quote: ... the VLPs were concentrated by ultracentrifugation (40,000 rpm, 2h, 10°C, Beckman SW41 rotor), resuspended in buffer A and observed by TEM ...
-
bioRxiv - Evolutionary Biology 2019Quote: ... centrifuged at 7500 rpm and 4°C for 20 minutes (J6-MI, Beckman Coulter), and sterilized using 0.2 μm syringe filters (Pall Life Sciences) ...
-
bioRxiv - Microbiology 2019Quote: ... The filtrate was centrifuged for 30 min at 4°C at 4300 rpm (Beckman Coulter X-14R centrifuge with an SX4750 swinging bucket) ...
-
bioRxiv - Cell Biology 2021Quote: ... After centrifugation (55,000 rpm, 80 min, 4°C) in a TLS55 rotor (Beckman Coulter), fractions were collected manually for precipitation with trichloroacetic acid (TCA ...
-
bioRxiv - Cell Biology 2021Quote: ... After centrifugation (38,000 rpm, 210 min, 4°C) in an SW41 rotor (Beckman Coulter), RNA content was measured at A254 while fractions were collected using a Foxy Jr ...
-
bioRxiv - Biochemistry 2020Quote: ... and spun at 90,000 rpm for 10 min at 4°C (TLA120.1 Beckman Coulter). After incubation at 37°C for 2 mins ...
-
bioRxiv - Immunology 2020Quote: ... Whole milk was centrifuged at 22°C for 10 minutes at 3,000 g (Beckman Coulter Allegra X-12R ...
-
bioRxiv - Genetics 2022Quote: ... and the final Hi-C library was purified with AMPure XP beads (Beckman Coulter). Promoter Capture Hi-C was performed using a customdesign Agilent SureSelect system following the manufacturer’s protocol ...
-
bioRxiv - Cell Biology 2022Quote: ... and centrifuged at 4°C for 30min at 5,000xg and subsequently at 10,000xg (Beckman Coulter Optima XPN-80 with a SW60 rotor) ...
-
bioRxiv - Molecular Biology 2023Quote: ... for 1 hour at 37°C and purified with RNAClean XP beads (Beckman Coulter). The RNA ends were extended using E ...