Labshake search
Citations for Beckman :
401 - 450 of 1577 citations for Rat Wide range C Peptide CP CLIA Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2022Quote: ... Membrane contamination was removed by centrifugation 100,000 x g 1.25 hours 4°C in an NVT65.2 rotor (Beckman Coulter). The clarified supernatant was concentrated to 50 µl by ultrafiltration (Sartorius Vivaspin Turbo ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... Gradients were centrifuged at 49,100g for 16 to 17 hrs at 4°C in an SW32Ti rotor (Beckman). Gradients were fractionated using a Brandel (UV ...
-
bioRxiv - Molecular Biology 2022Quote: ... and spun at 100,000g for 70 minutes at 4°C (Optima XPN-80 Ultracentrifuge, Beckman Coulter, California, USA) in a 45ti fixed angle rotor ...
-
bioRxiv - Neuroscience 2022Quote: ... were then spun at 19,000rpm/90 minutes/4°C using an ultracentrifuge and a SW28 hanging rota (Beckman). All supernatant was removed and each viral pellet was resuspended with 300 µl of 1% bovine serum albumin (Tocris Bioscience ...
-
bioRxiv - Molecular Biology 2022Quote: ... Gradients were centrifuged at 35K rpm for 120 min at 4°C in a SW-41Ti rotor (Beckman) with maximum acceleration and no brake using a Beckman Optima L-90 Ultracentrifuge ...
-
bioRxiv - Molecular Biology 2022Quote: ... and centrifuged at 100,000g for 70 min at 4°C (Optima XPN-80 Ultracentrifuge, Beckman Coulter, California, USA) in a 45ti fixed angle rotor ...
-
bioRxiv - Systems Biology 2023Quote: ... Tubes were spun at 31,000 rpm for 3h at 10°C in an SW41 rotor (Beckman Coulter ultracentrifuge) and the resulting phage band had a buoyant density of 1.36 g/ml ...
-
bioRxiv - Neuroscience 2023Quote: EVs suspensions were pelleted by centrifugation at 100,000 x g for 70 min at 4°C using a 70.1Ti rotor (Beckman) and resuspended in 20 volumes (w/v ...
-
bioRxiv - Neuroscience 2023Quote: ... the supernatant was centrifuged at 43,800 RPM for 75 min at 4°C using a Ti45 rotor (Beckman). The floating lipid layer and supernatant were discarded and the centrifuge tube was washed twice with 6 mL PBS ...
-
bioRxiv - Neuroscience 2023Quote: ... Fractions were diluted with 15 mL of cold PBS and centrifuged at 100,000 x g for 70 min at 4°C using a 70.1Ti rotor (Beckman). The supernatants were discarded and the pellets (containing EVs ...
-
bioRxiv - Cell Biology 2022Quote: ... which were run at 20°C and 48,000 rpm in a XL-I analytical ultracentrifuge (Beckman-Coulter Inc.) equipped with UV-VIS absorbance and Raleigh interference detection systems ...
-
bioRxiv - Molecular Biology 2023Quote: ... Digested extracts were then loaded on 1 M sucrose cushions 116 and centrifuged at 70,000 rpm for 2 hours at 4°C in a TLA100.4 rotor (Beckman). Ribosome pellets were resuspended in 300 µl of TRIzol reagent (Invitrogen) ...
-
bioRxiv - Microbiology 2022Quote: ... Sacculi were repeatedly washed with MilliQ water by ultracentrifugation at ∼540,000 x g for 15 min at 20 °C in a TLA-100.3 rotor (OptimaTM Max ultracentrifuge, Beckman) until completely removing SDS traces ...
-
bioRxiv - Biochemistry 2023Quote: ... Gradients were centrifuged at 35K rpm for 3 hrs at 4°C in a SW-41Ti rotor (Beckman) with maximum acceleration and no brake using a Beckman Optima L-90 Ultracentrifuge ...
-
bioRxiv - Microbiology 2023Quote: ... This OMV solution was then pelleted by ultracentrifugation at 100,000 x g for 3h at 4°C (Beckman Coulter Optima L-80 XP Ultracentrifuge ...
-
bioRxiv - Microbiology 2023Quote: ... concentrated by ultracentrifugation at 22.000 rpm for 2.5 h at 4°C (Optima™ XPN-80 – Beckman Coulter), redissolved in 100 µL of DMEM and stored in small aliquots at −80 °C ...
-
bioRxiv - Cell Biology 2023Quote: ... 10% and 6% and ultracentrifuged at 187,000xg for 1:30h at 4°C in Sw32.1Ti rotor (Beckman Coulter). Afterwards ...
-
bioRxiv - Genomics 2023Quote: ... Extracts were then centrifuged at 148,000 g for 2.5 hours at 4°C using the SW 28 Ti rotor (Beckman). Resulting pellet was resuspended overnight at 4°C in 1.5 ml of HBSS ...
-
bioRxiv - Bioengineering 2023Quote: ... at 4°C using an Optima Max Ultracentrifuge and a TLA-55 rotor (Beckman Coulter, Brea, CA, USA). The pellet from this supernatant (i.e. ...
-
bioRxiv - Biophysics 2023Quote: ... transferred to 50 ml polypropylene tubes and centrifuged for 10 minutes at 22°C at 3000 xg (Beckman Coulter Allegra X-12R ...
-
bioRxiv - Cell Biology 2023Quote: ... Mitochondrial membranes were pelleted at 72000 xg for 30 min at 4°C using an optimaTM ultracentrifuge (Beckman) with Beckman rotor (TLA 120) ...
-
bioRxiv - Biochemistry 2023Quote: ... samples were centrifuged at 80,000 rpm for 20 min at 4°C in a TLA-100.1 rotor (Beckman). The supernatant was carefully removed ...
-
bioRxiv - Cancer Biology 2023Quote: ... Following centrifugation at 50,000 rpm for 16 hours at 4 °C in SW 55 Ti Rotor (Beckman Coulter), fractions (100 μL each ...
-
bioRxiv - Cell Biology 2023Quote: ... The fraction containing TpPyShell was further concentrated by centrifugation (4000 g, 15 min, 4°C, SX4400 rotor; Beckman) with Amicon Ultra (M.W.4000 ...
-
bioRxiv - Cell Biology 2023Quote: ... Cells were harvested by two rounds of centrifugation (6,000 rpm, 10 min, 4°C, JLA-9.1000 rotor; Beckman), resuspended in Buffer A containing 50 mM Tris-HCl pH8.0 ...
-
bioRxiv - Molecular Biology 2023Quote: ... with a 16h incubation step at 37 °C and purified with 1.8X volume AMPure XP beads (Beckman Coulter) with the addition of 1.6X isopropanol ...
-
bioRxiv - Biophysics 2023Quote: Sedimentation-velocity analytical ultracentrifugation experiments were performed at 20 °C with an XL-I analytical ultracentrifuge (Beckman-Coulter) and an An50 Ti rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... pH 11.5) and were centrifuged for 60 min at 4 °C (150,000 g, Rotor TLA-100, Beckman Coulter). The yielded pellet was analyzed by immunoblotting and mass spectrometry (Supplementary Figure 1).
-
bioRxiv - Cell Biology 2023Quote: ... pH 11.5) and is centrifuged for 60 min at 4 °C (150,000 g, Rotor TLA-100, Beckman Coulter). The resulting supernatant contains the released matrix proteins and peripheral membrane proteins ...
-
bioRxiv - Cell Biology 2023Quote: ... pH 11.5) and was centrifuged for 60 min at 4 °C (150,000 g, Rotor TLA-100, Beckman Coulter). The resulting supernatant contains matrix proteins and peripheral membrane proteins ...
-
Faa1 membrane binding drives positive feedback in autophagosome biogenesis via fatty acid activationbioRxiv - Biochemistry 2023Quote: ... Lysates were cleared by centrifugation (20,000 rpm for 45 min at 4°C in a Beckman SW45Ti rotor). The supernatant was incubated with IgG Sepharose beads (GE Healthcare ...
-
bioRxiv - Cell Biology 2023Quote: ... samples were centrifuged at 80,000 rpm for 20 min at 4°C in a TLA-100.1 rotor (Beckman). The supernatant was carefully removed ...
-
bioRxiv - Genomics 2024Quote: ... The reaction was incubated at 37°C for 30min and then purified using AMPure Beads (Beckman Coulter, A63881) with a ratio of 1.8x and eluted in 10μL of EB (10mM Tris-HCl) ...
-
bioRxiv - Cell Biology 2024Quote: ... The lysate was centrifuged at 20,000 rpm for 20 min at 4 °C in a JA 25.50 rotor (Beckman) and the supernatant was filtered through a 0.45 µm syringe filter ...
-
bioRxiv - Microbiology 2024Quote: ... The eluent was ultracentrifuged (100,000 ×g, 4°C, 16 h) using Optima L-100 XP Ultracentrifuge (Beckman Coulter) to sediment ribosomes.
-
bioRxiv - Molecular Biology 2024Quote: ... and centrifuged for 1.5 h at 75,000 rpm at 4°C using a TLA-120.2 rotor (Beckman Coulter). After carefully removing the supernatant ...
-
bioRxiv - Neuroscience 2024Quote: ... the samples were ultracentrifuged (4 °C for 60 min) at 100,000×g (Optima MAX Preparative Ultracentrifuge, Beckman Coulter). Supernatants ...
-
bioRxiv - Biochemistry 2024Quote: ... the purified particles were pelleted down by ultra-centrifugation at 30,000 rpm for 3.5 hours at 4 °C (Beckman Coulter ...
-
bioRxiv - Developmental Biology 2021Quote: AnnexinV/FITC Kit (Beckman Coulter) was used to quantify apoptosis in mouse sperm ...
-
bioRxiv - Microbiology 2021Quote: ... Hemoccult SENSA kit (Beckman Coulter) was used to assess rectal bleeding as per the manufacturer’s instructions ...
-
bioRxiv - Biophysics 2021Quote: ... Cell debris was removed by centrifugation (12,000x□g for 15□min at 4°C) and membranes were then pelleted at 45,000 rpm in a Type 45 Ti rotor (Beckman) for 3□h at 4°C ...
-
bioRxiv - Biophysics 2021Quote: ... the samples were spun in a bench-top Beckman ultracentrifuge at 670,000 g at 20 °C for 30 min (TLA-120.1 rotor, Beckman-Coulter) to pellet F-actin and associated Tpm ...
-
bioRxiv - Biochemistry 2020Quote: ... Lysates were cleared by ultracentrifugation (40 000 rpm for 30 min at 4°C in a Beckman Ti45 rotor). Supernatant was filtered (0.45 μm ...
-
bioRxiv - Biochemistry 2020Quote: ... Lysates were cleared by ultracentrifugation (25 000 rpm for 30 min at 4°C in a Beckman Ti45 rotor). Supernatant was incubated with GSH beads (GE Healthcare ...
-
bioRxiv - Biochemistry 2021Quote: ... after which the lysate was clarified by centrifugation at 30,000 x g for 60 min at 4 °C in a JA 25.50 rotor in an Avanti J-E centrifuge (Beckman). Nucleic acids in the clarified lysate were precipitated by slowly adding polyethyleneimine with constant stirring in an ice bath to a final concentration of 0.4% ...
-
bioRxiv - Microbiology 2020Quote: ... of 1.5 mL and then centrifuged 45 min at 100,000g at 4°C in a TLA-100 ultracentrifuge (Beckman Coulter). The supernatant contains the soluble fraction and the pellet corresponds to the total membranes ...
-
bioRxiv - Cancer Biology 2021Quote: ... Cell suspensions were stirred for 20 min at 37°C and analyzed using a Cytoflex S Cytometer (Beckman Coulter).
-
bioRxiv - Cell Biology 2019Quote: ... The resulting gradients were subjected to ultracentrifugation at 4°C for 14 hrs at 41,000 rpm in an SW41 Ti rotor (Beckman), and then fractionated ...
-
bioRxiv - Cell Biology 2020Quote: ... 0.5 mM DTT, 100 μg/ml cycloheximide) and centrifuged (160,000 g, 120 min, 4°C) in an SW41Ti rotor (Beckman). After centrifugation the sediment in the tube went through a UV detector at the wavelength of 254nm and simultaneously the required fractions (>=5 ribosomes ...
-
bioRxiv - Cell Biology 2020Quote: ... The sample was centrifuged at 14,000 g for 10 min at 10°C and then loaded in an Optima analytical centrifuge (Beckman) in an An-50Ti rotor pre-equilibrated at 20°C ...