Labshake search
Citations for Beckman :
501 - 550 of 937 citations for Hemoglobin High Sensitivity Colorimetric Detection Kit 10 Plate since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genomics 2021Quote: ... Libraries were amplified for a total of 8-10 cycles and DNA purified using AMPure XP beads (Beckman Coulter). The quality and concentration of ATAC-seq libraries were evaluated using the Bioanalyzer DNA High Sensitivity Assay (Agilent Technologies ...
-
bioRxiv - Developmental Biology 2021Quote: ... Lentivirus containing > 10 kb length insert (inducible CRISPRi and CRISPRa) was concentrated using AVANTI J-30I centrifuge (Beckman Coulter) with JS-24.38 swing rotor at 72000g for two hours at 4 degree ...
-
bioRxiv - Biochemistry 2020Quote: ... mixed for 10 minutes at 4°C and centrifuged at 25,000 rpm for 45 minutes (Beckman Ti-45 rotor). The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor ...
-
bioRxiv - Cell Biology 2021Quote: ... with or without 5µM Gli for 15 minutes at room temperature in 1x BRB80 supplemented with 0.1 mg/mL BSA and then subjected to sedimentation by ultracentrifugation at 50,000 rpm for 10 minutes at 27°C in a TLA 120.1 rotor (Beckman Coulter). Pellets were subsequently resuspended and the amount of protein in each pellet and supernatant was analyzed by SDS-PAGE ...
-
bioRxiv - Biochemistry 2020Quote: ... Cells were collected by centrifugation (8 000 rpm for 10 min at 4 °C, JLA-16.25 Beckman Coulter rotor), pellets frozen in liquid nitrogen and stored at −80°C ...
-
bioRxiv - Microbiology 2020Quote: ... and separated in potassium tartrate-glycerol gradient 10–35% for 2 hrs at 175,000 ×g (Beckman SW41 Ti rotor). Purified viral particles were suspended in 10 µg/ml BSA solution or 10 µg/ml CbAE-1 solution and incubated for 1 hr at room temperature ...
-
bioRxiv - Microbiology 2021Quote: ... and 500 μl of a 10 ml resuspension of cells from each flask diluted with 19.5 ml Isoton II Diluent (Beckman). PD time ...
-
bioRxiv - Microbiology 2020Quote: ... Supernatant was transferred to a fresh tube and further clarified by centrifugation at 18,000 x g for 10 min at 4°C in a microfuge (Beckman), and supernatant transferred to a fresh tube.
-
bioRxiv - Microbiology 2020Quote: ... Cell lysate was then clarified 200 x g for 10 min at 4°C in an Allegra centrifuge (Beckman). Supernatant was transferred to a fresh tube and further clarified by centrifugation at 18,000 x g for 10 min at 4°C in a microfuge (Beckman) ...
-
bioRxiv - Genetics 2022Quote: ... The lysate was centrifuged at 2000 rpm for 10 min at 4 °C in a JA-20 rotor (Beckman). The supernatant from the previous step was centrifuged in a Beckman Coulter high speed centrifuge equipped with a JA-20 rotor at 6000 rpm for 20 min at 4 °C ...
-
bioRxiv - Cancer Biology 2020Quote: ... equivalent amounts of ribosomes for each lysate was loaded onto each 10%-45% sucrose density gradient (BioComp Gradient Master machine) for ultracentrifugation at 33,000 rpm for 5 hours (Beckman Optima L80K Ultracentrifuge ...
-
bioRxiv - Biochemistry 2020Quote: ... the supernatant was mixed with GMPCPP-seeds from the prior step and then incubated at 37°C for 30 mins followed by centrifugation at 90,000 rpm for 10 min at 37°C (TLA120.1 Beckman Coulter). The microtubule pellets were rinsed twice with 100 μ! warm (37°C ...
-
bioRxiv - Microbiology 2022Quote: ... phage suspension was layered on top of a 5–20 % sucrose (w/vol, in Tris-HCl pH 7.2 with 3 mM MgCl2 and 10 mM CaCl2) and centrifuged (Beckman Optima L-K90 ...
-
bioRxiv - Microbiology 2022Quote: ... The light-scattering zone was collected and further purified in 20– 70 % sucrose gradient (w/vol, in Tris-HCl pH 7.2 with 3 mM MgCl2 and 10 mM CaCl2) by centrifugation (Beckman Optima L-K90 ...
-
bioRxiv - Physiology 2022Quote: ... The dissected tissues were held in a glass-bottom dish (35 × 10 mm, IWAKI #3910-035) with an insect pin (φ0.10 mm, Ento Sphinx Insect Pins) and silicone grease (Beckman), and 20 μL of SDM was added to cover the tissue ...
-
bioRxiv - Biochemistry 2022Quote: ... mixed for 10 minutes at 4°C and centrifuged at 25,000 rpm for 45 minutes (Beckman Ti-45 rotor). The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor ...
-
bioRxiv - Systems Biology 2020Quote: ... the 500xg supernatant from enzymatic digestion of cardiovascular tissues underwent further ultracentrifugation at 10,000xg for 10 minutes at 4°C (Beckman Coulter ...
-
bioRxiv - Genomics 2019Quote: ... All extractions from each respective fragment section were then pooled into two samples (pooled sample 5_27-10 and pooled sample 6_2-1) and re-purified using AMPure XP Beads (Agencourt, Beckman Coulter) adding 0.4 volume (V/V ...
-
bioRxiv - Biochemistry 2021Quote: ... and 10 mM NH4Cl) and centrifuged for 16 h at 4°C with 18,000 rpm in an SW60Ti rotor (Beckman). Gradients were hand-fractionated and ribosome concentrations were determined by absorbance at 260 nm (A260 ...
-
bioRxiv - Immunology 2021Quote: ... overlaid onto 5 ml of 10% sucrose in NTE (135 mM NaCl, 10mM TrisCl, ph 7.50, 1mM EDTA) in ultra-centrifuge tubes (Beckman) and centrifuged at 25,000 rpm for 90 minutes at 4°C ...
-
bioRxiv - Microbiology 2021Quote: ... The supernatant was loaded onto a 10-55% sucrose gradient followed by ultracentrifugation (Beckman Coulter Optima XPN-100 ultracentrifuge) at 32,500 × rpm at 4 °C for 80 minutes in the SW41 rotor ...
-
bioRxiv - Cell Biology 2019Quote: ... A 0.6-1.9 M continuous sucrose gradient was prepared in 10 mM HEPES pH 7.2 in ultracentrifuge tubes (Beckman Coulter) that were coated with Sigmacote (Sigma #SL2) ...
-
bioRxiv - Cell Biology 2022Quote: ... milk was prevented from cooling down and was processed within 20 minutes after collection by 2 rounds of centrifugation at 3,000xg for 10 minutes at 23°C (Beckman Coulter Allegra X-12R ...
-
bioRxiv - Molecular Biology 2023Quote: ... 72 μL of 10% sarkosyl was added to 650 μL of each sample in ultra-centrifuge tubes (Beckman Coulter) and samples were rotated end-over-end at room temperature for one hour ...
-
bioRxiv - Neuroscience 2022Quote: ... myelin was layered onto 3 mL ice cold 0.85 M sucrose solution in a 10 mL ultracentrifuge tube (Beckman) before centrifugation at 75 000 x g for 30 min at 4 °C on a Beckman Ultracentrifuge with MLA-55 rotor (acceleration 7 ...
-
bioRxiv - Systems Biology 2022Quote: ... The cell culture in a 48-well microplate (Iwaki) was suspended in 10 ml of ISOTON II (Beckman Coulter). Every 100 to 500 μl of the suspended solutions were flowed for particle analysis ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: Linear 10–30% glycerol gradients were prepared in 11□mm□×□34□mm polyallomer centrifuge tubes (Beckman Coulter, Brea, CA) with HEM buffer [25 mM HEPES (pH 7.5) ...
-
bioRxiv - Neuroscience 2023Quote: ... The pellet was resuspended in 4.5 volumes of ice-cold extraction buffer and re- centrifuged at 11,300 RPM for 10 min at 4°C using a Ti45 rotor (Beckman). The supernatant was filtered through a 70 μm pore size cell-strainer and combined with the first supernatant ...
-
bioRxiv - Neuroscience 2023Quote: ... The homogenate was centrifuged at 11,300 revolutions per minute (RPM) for 10 min at 4°C using a Ti45 rotor (Beckman). The supernatant was filtered through a 70 μm pore size cell-strainer and retained on ice ...
-
bioRxiv - Biophysics 2023Quote: ... and the resulting lysate was cleared by centrifugation at 279,288 × g for 10 minutes at 4°C using a tabletop centrifuge unit from Beckman Coulter ...
-
bioRxiv - Genomics 2023Quote: ... followed by centrifugation at 31,900 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter). Next ...
-
bioRxiv - Immunology 2022Quote: ... then samples were centrifuged at 2,700 RPM for 10 minutes at 4°C in a tabletop centrifuge (Beckman Coulter). The supernatant (serum ...
-
bioRxiv - Developmental Biology 2023Quote: ... The cytosolic lysate was layered on 10%-50% sucrose gradients and centrifuged at 246,000 g for 65 min in SW55 swinging bucket rotor (Beckman). Continuous UV absorbance was monitored with Triax flowcell monitor (BioComp).
-
bioRxiv - Plant Biology 2023Quote: ... were added and incubated for 10 minutes at room temperature and purified with 0.4X AMPure XP beads (Beckman Coulter). Adapter Mix II (ONT ...
-
bioRxiv - Plant Biology 2023Quote: ... were added and incubated for 10 minutes at room temperature and purified with 0.5X AMPure XP beads (Beckman Coulter), and Long Fragment buffer (ONT ...
-
bioRxiv - Plant Biology 2023Quote: ... were added and incubated for 10 minutes at room temperature and purified with 0.4X AMPure XP beads (Beckman Coulter) using Long Fragment buffer (ONT ...
-
bioRxiv - Plant Biology 2023Quote: ... were added and incubated for 10 minutes at room temperature and purified with 0.4X AMPure XP beads (Beckman Coulter). 1D2 Adapters (ONT ...
-
bioRxiv - Microbiology 2023Quote: ... 0.5 mL of 30% and 1.8 mL 10% of iodixanol solutions and floated into the gradient by ultracentrifugation in a SW60Ti rotor (Beckman) at 192,000 x g ...
-
bioRxiv - Microbiology 2021Quote: ... and the reaction purified using the Agencourt AMPure XP Kit (Beckman Coulter) according to manufacturer’s instructions ...
-
bioRxiv - Molecular Biology 2021Quote: ... cDNA was purified using the Agencourt AMPure XP kit (Beckman Coulter Genomics), samples were pooled (equimolar) ...
-
bioRxiv - Genomics 2020Quote: ... the amplified cDNA was cleaned up with SPRIslect Reagent kit (Beckman Coulter), fragmented ...
-
bioRxiv - Microbiology 2020Quote: ... The cDNA was purified using the Agencourt AMPure XP kit (Beckman Coulter) and analyzed by capillary electrophoresis ...
-
bioRxiv - Bioengineering 2022Quote: ... RNA was extracted using the Agencourt RNAdvance Tissue Kit (Beckman Coulter, A32646) following the manufacturer’s instructions ...
-
bioRxiv - Neuroscience 2020Quote: ... and subjected to Illumina library preparation using SPRIworks HT Reagent Kit (Beckman Coulter ...
-
bioRxiv - Microbiology 2020Quote: ... cDNA was purified with the Agencourt AMPure XP kit (Beckman Coulter Genomics) and analyzed with Shimadzu MultiNA microchip electrophoresis ...
-
bioRxiv - Cancer Biology 2020Quote: ... Genomic DNA was isolated using the Agencourt GenFind V3 kit (Beckman Coulter) and next-generation sequencing libraries were prepared using the KAPA HyperPrep kit (Roche) ...
-
bioRxiv - Microbiology 2022Quote: ... Amplified cDNAs were cleaned up with SPRIselect Reagent kit (Beckman Coulter, B23318). Indexed sequencing libraries were constructed by enzymatic fragmentation ...
-
bioRxiv - Immunology 2022Quote: ... Adaptor-ligated DNA was purified using AM Pure XP kit (Beckman-Coulter) at a 0.8:1 ratio (beads to sample ...
-
bioRxiv - Plant Biology 2021Quote: ... They were purified using Agencourt AMPure XP Kit (Beckman Coulter, Brea, USA) with 0.7 μL AmPure XP beads per 1μL of sample ...
-
bioRxiv - Cancer Biology 2020Quote: ... The obtained cDNA was cleaned-up using SPRIselect Reagent Kit (Beckman Coulter) and quantified using an Agilent 4200 Tape Station HS D5000 Assay (Agilent Technologies) ...