Labshake search
Citations for Beckman :
251 - 300 of 704 citations for Arg8 Vasopressin AVP ELISA Kit 5 Plate since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2020Quote: ... and anti-CD27-PE-Cy5 (clone 1A4CD27; 2.5 μL; cat. # 6607107) and anti-NKG2A-APC (clone Z199; 5 μL; cat. # A60797) from Beckman Coulter (Supplementary Fig ...
-
bioRxiv - Cell Biology 2021Quote: ... and centrifuged at 40,000 rpm (∼128,000 × g) for 3 h at 4°C using an MLS-5 rotor (Beckman Coulter). Aldolase (158 kDa ...
-
bioRxiv - Biochemistry 2020Quote: ... The cultures were grown until OD600 of 0.8 at 37 °C and the cells were collected by centrifugation at 8,000 rpm for 5 minutes in JLA-16.25 rotor (Beckman Coulter), dissolved in 0.5 mL of HEPES:Polymix buffer ...
-
bioRxiv - Microbiology 2021Quote: ... liquid-captured bioaerosols (5 – 10 mL) were centrifuged for 10 minutes at 3000 × g (Allegra X-15R, Beckman Coulter) and resuspended in 200 μL of Middlebrook 7H9 medium supplemented with 100 μM DMN-tre ...
-
bioRxiv - Cell Biology 2021Quote: ... and the mixtures were ultracentrifuged at 80,000 rpm for 5 min at 30 °C using a TLA100 rotor and an Optima TLX ultracentrifuge (Beckman). The microtubule pellets were resuspended in PEM supplemented with 1 mM DTT ...
-
bioRxiv - Cell Biology 2020Quote: ... and 5 % solutions on top of each other in a 13.2 ml open-top polyallomer tube (331372, Beckman Coulter). The 1 ml concentrates were overlaid on top of the gradient ...
-
bioRxiv - Microbiology 2021Quote: ... Linear sucrose gradients were prepared by layering 1.8 ml each of sucrose solutions (wt/wt; prepared in 5 mM EDTA, pH 7.5) into 14-by 95-mm ultracentrifuge tubes (Beckman) in the following order ...
-
bioRxiv - Cancer Biology 2020Quote: ... equivalent amounts of ribosomes for each lysate was loaded onto each 10%-45% sucrose density gradient (BioComp Gradient Master machine) for ultracentrifugation at 33,000 rpm for 5 hours (Beckman Optima L80K Ultracentrifuge ...
-
bioRxiv - Microbiology 2022Quote: ... Cells were grown for additional 1 hour at 30 °C and the biomass was harvested by centrifugation (10,000 rpm, for 5 minutes, JLA-10.500 rotor (Beckman Coulter)).
-
bioRxiv - Biochemistry 2019Quote: ... The cell lysates were subjected to two rounds of centrifugation at 18000 rpm for 5 and 30 mins in a JA-25.50 rotor (Beckman). Bradford assay was used to normalize protein levels for co-immunoprecipitation and immunoblot analysis ...
-
bioRxiv - Genetics 2020Quote: ... 5 μL of each PCR reaction from the single worm lysate was pooled and purified by SPRI (Beckman Coutler) to remove unincorporated oligos ...
-
bioRxiv - Immunology 2021Quote: ... Soluble CuMV-CP-containing protein solution was separated from the cellular proteins by ultracentrifugation in a sucrose gradient (20%-60% sucrose; ultracentrifugation at 25,000 rpm for 6 hours at 5°C [SW28 rotor, Beckman]). After dialysis CuMVTT-containing gradient fractions ...
-
bioRxiv - Microbiology 2020Quote: ... The sample was vortexed for 10 s and incubated at room temperature for 5 minutes before centrifugation at 12,000 rpm (JA-15 1.5 rotor, Beckman Coulter) 4°C for 5 minutes ...
-
bioRxiv - Microbiology 2022Quote: ... Fractions were diluted in 5 ml PBS and washed by ultracentrifugation at 200,000 × g (60 min, 4°C, AH-650 rotor, 5 ml Beckman Ultra-Clear tubes ...
-
bioRxiv - Cell Biology 2022Quote: ... Resuspended pellets were then subjected to an iodixanol density gradient in 5-mL Ultra-Clear centrifuge tubes (Beckman Coulter). The tubes were first filled with a two-layer gradient ...
-
bioRxiv - Cell Biology 2022Quote: ... were mixed 1:1 with liposomes (5 mg/ml) and floated for 2h at 55,000 rpm in a TLS-55 rotor (Beckman) at 25 °C through a sucrose gradient ...
-
bioRxiv - Cell Biology 2022Quote: ... The stock solution of aggregate-depleted BSA (5% w/v) was prepared by overnight centrifugation at 100,000 x g (SW28 rotor Beckman Coulter ...
-
bioRxiv - Cell Biology 2022Quote: ... and 3.5 mL of 5% iodixanol in a 16.8 mL open top polyallomer tube (Beckman Coulter, Fullerton, California, USA). One milliliter of concentrated conditioned medium was pipetted on top of the gradient and samples were centrifuged for 18 h at 100,000 ×g and 4 °C using a SW 32.1 Ti rotor (Beckman Coulter ...
-
bioRxiv - Plant Biology 2023Quote: ... Cell debris was removed by centrifugation at 1,300 g for 5 min (Beckman Centrifuge Avanti® J-26-XP). Afterwards ...
-
bioRxiv - Neuroscience 2023Quote: ... after which the cells were harvested by centrifugation at 4,000 rpm for 30 min at 5°C using the JLA 8.1000 rotor (Beckman Coulter). The harvested pellets were stored at −20°C until use ...
-
bioRxiv - Microbiology 2022Quote: ... the stained cells were detached by 5 mM of EDTA/PBS and analyzed with a CytoFLEX Flow Cytometer (Beckman). 10,000 events in a gated live cell population (based on SSC/FSC ...
-
bioRxiv - Molecular Biology 2023Quote: ... Cell lysates were subjected to two rounds of centrifugation at 18000 rpm for 5 and 30 mins in a JA-25.50 rotor (Beckman). Protein levels were normalized for coimmunoprecipitation and immunoblot analysis using a Bradford Assay ...
-
bioRxiv - Cancer Biology 2023Quote: ... Percentage of cells with each DNA content (2N, 3N, 4N, 5-8N) were estimated using CytExpert software (Beckman Coulter). For DNA content analysis using sorted cells ...
-
bioRxiv - Microbiology 2024Quote: ... respectively) were gently layered on top of each other in ultracentrifuge tubes (Ultra-Clear 5 mL Tube, Beckman Coulter) and a continuous gradient was generated using a gradient maker (Gradient Master ...
-
bioRxiv - Biophysics 2024Quote: ... Each seed mix was clarified using an ultra-centrifuge (Beckman Optima MAX-XP, 90,000 RPM, 4°C, 5 min) then snap-frozen in small aliquots and stored at -80°C ...
-
bioRxiv - Microbiology 2024Quote: ... The phage was purified by isopycnic centrifugation in a CsCl discontinuous gradient for 5 h at 32,000 rpm in a SW41 rotor (Beckman) at 20°C ...
-
bioRxiv - Cancer Biology 2019Quote: ... A quantity of 10 μl of lentiviral particles was added to the appropriate wells and the cells and lentiviral particles containing plates were immediately centrifuged at 32°C for 90 minutes at 2500 rpm speed in a centrifuge (Beckman Allegra X-12R). After spinoculation ...
-
bioRxiv - Synthetic Biology 2022Quote: ... 20 μL reactions were prepared by dispensing 1 μL of each 10 μM reverse primer into the wells of a 96-well PCR plate using the Echo liquid handler (Beckman Coulter, Brea, CA). A mastermix consisting of polymerase premix ...
-
bioRxiv - Biochemistry 2021Quote: ... was arrayed in a minimum of a triplicate across a 10 kDa MWCO 96-well microdialysis plate (SWISSCI Diaplate™) and sealed with aluminum foil seals (Beckman Coulter 538619) to create the protein chambers ...
-
bioRxiv - Cell Biology 2021Quote: ... The fluorescence generated by the reduction of resazurin to resorufin by live cells was measured using a Beckman coulter DTX 880 multimode plate reader (Beckman Coulter, Brea, California) (570/600 nm).
-
bioRxiv - Pathology 2022Quote: ... Emission from Renilla Luciferase and Citrine was measured simultaneously at 465 nm and 535 nm in a plate-reader (Beckman coulter, Villepinte, France). EPAC1 activation decreases BRET signal (465 nm/535 nm ratio).
-
bioRxiv - Evolutionary Biology 2023Quote: ... Five thousand cells from each of the 300 samples were analyzed in 96-well plates in a CytoFLEX Platform flow cytometer (Beckman Coulter, California, USA) at the Feldan Therapeutics facility (Quebec ...
-
bioRxiv - Pathology 2020Quote: ... 200 μl were added to LBF lysis buffer (supplied with the kit) and viral RNA was extracted using RNAdvance Viral Kit (Beckman Coulter) and further processed on the Biomek i7 Automated Workstation (Beckman Coulter) ...
-
bioRxiv - Immunology 2022Quote: ... and total RNA was isolated using Isospin cell and tissue RNA kit (Nippon Gene) or an RNAdvance v2 kit (Beckman Coulter) according to manufacturer instructions and quantified with an RNA HS Assay Kit (Thermo Fisher ...
-
bioRxiv - Biophysics 2020Quote: ... lysate was centrifuged at 5 °C with 13000 rpm for 15 min by Avanti J-E Ultra Centrifuge (Beckman Coulter). Supernatant from centrifugation was filtered with 0.45 μm SFCA syringe filters (Sigma Aldrich ...
-
bioRxiv - Microbiology 2020Quote: ... and overlaid with 6 ml of 30% and 3 ml of 5% sucrose (w/v) followed by centrifugation at 32,000 rpm in SW41 rotor (Beckman Coulter) for 20 h ...
-
bioRxiv - Molecular Biology 2020Quote: ... Four mL of each density (3.5 mL for the 5% density) was stacked into an open polyallomer tube (337986, Beckman Coulter) using a Tecan freedom EVO ...
-
bioRxiv - Biophysics 2022Quote: ... The cell suspension was centrifuged for 5 min at 2000 g (Centrifuge Beckman Coulter Allegra X-15-R, Rotor Sx4750A)) and 4°C ...
-
bioRxiv - Cell Biology 2020Quote: ... 5 × 105 additional cells were immediately processed for far red signal analysis by flow cytometry (Gallios, Beckman Coulter, Brea, USA) (D0) ...
-
bioRxiv - Genomics 2019Quote: ... DNA samples were loaded onto 5-20% sucrose gradients and fractionated according to size by centrifugation (SW-40Ti rotor; Beckman Coulter Optima L-100 XP ...
-
bioRxiv - Microbiology 2019Quote: ... Then 0.8 mL of Cold 60% sucrose buffer A was added to RNAse-free 5 mL Ultraclean tubes for ultracentrifugation in a SW55Ti (Beckman). The ribosome-containing supernatant was used to fill these tubes and an ultracentrifugation step was performed for 16 hs at 150.000g ...
-
bioRxiv - Neuroscience 2020Quote: ... reverse 5’-CTTA TTAGTCAGTCAGAAACAAC-3’).ThePCR amplicon was purified using RNAse-free SPRI beads (Agencourt RNAclean XP, Beckman-Coulter A63987) and then used for in vitro transcription with the HiScribe T7 ARCA mRNA Kit (with tailing ...
-
bioRxiv - Microbiology 2020Quote: ... for 5 minutes using a FIBERLite F10BCI-6×500y rotor (Piramoon Technologies) in an Avanti JXN-30 centrifuge (Beckman Coulter). The clarified cell lysate was further centrifuged in a JS-24.38 rotor (Beckman Coulter ...
-
bioRxiv - Microbiology 2020Quote: ... At the end of each selection cells were pelleted from the media by centrifugation 200 x g for 5 min in an Allegra centrifuge (Beckman) and supernatant was transferred for storage at −80C ...
-
bioRxiv - Microbiology 2020Quote: MT-2 cells were collected and washed three times by pelleting at 200 x g for 5 min at 4°C in an Allegra centrifuge (Beckman) and resuspending cells in ice-cold PBS ...
-
bioRxiv - Microbiology 2022Quote: ... and layered onto a preformed 11 mL 5% to 15% (wt/vol) Ficoll gradient in a 13.2 mL thin-wall polyallomer ultracentrifuge tube (Beckman Coulter). Gradients were centrifuged at 12,000 rpm for 2 h at 4°C in an SW41 Ti swinging-bucket rotor in a Sorvall Discovery SE ultracentrifuge ...
-
bioRxiv - Cell Biology 2022Quote: ... brought up to 3 ml using sterile 20 mM Tris-HCl pH 7.5 and pelleted at 40,000g and 4°C for 60 minutes (TLA100.3 rotor, Optima Max-XP ultracentrifuge, Beckman Coulter, Inc.). Finally ...
-
bioRxiv - Immunology 2022Quote: ... 1.5 μl of PI was also added and samples were run on the Gallios™ Flow Cytometer (Beckman Coulter, Inc). Data was analysed offline using Kaluza® Flow Analysis software version 2.1a (Beckman Coulter Inc. ...
-
bioRxiv - Molecular Biology 2020Quote: ... The following day the viral pellet was resuspended in 5 ml PBS and centrifuged at 20,000 rpm for 90 mins at 4°C (Optima XL-100K, Beckman Coulter). The pellet was then resuspended in the required volume of PBS before being aliquoted and stored at −70°C.
-
bioRxiv - Immunology 2021Quote: ... subsequently overlaid onto 5 mL of 20% sucrose and ultracentrifuged at 24,000 rpm for 2.5 hrs (Beckman XPN80, SW32.Ti). The viral pellet was resuspended in PBS.