Labshake search
Citations for Beckman :
151 - 200 of 323 citations for Adenovirus Type 40 Hexon Protein since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2020Quote: ... Samples were ultracentrifuged at 95,000 rpm at 4°C for 1 h and 40 min using a TLA100.2 rotor (Beckman). Supernatants were saved if needed for further analysis ...
-
bioRxiv - Cell Biology 2022Quote: ... passed through a 40 μm strainer and subjected to analysis on a CytoFlex S or Gallios (Beckman Coulter). Analysis was performed using Kaluza software (Beckman Coulter) ...
-
bioRxiv - Cell Biology 2020Quote: ... and spun at 3,300 (2,647 rcf) rpm at 4 °C for 40 min using JS 5.3 rotor (Beckman Coulter) in Beckman Avanti J-26S ...
-
bioRxiv - Biophysics 2020Quote: ... for 40 min and the supernatant was collected and spun at 35,000 rpm in 50.2Ti rotor (Beckman Coulter) for 1 hr to pellet membranes ...
-
bioRxiv - Biochemistry 2022Quote: ... 2 s off at 30 % amplitude for 10 min and cell debris was removed by centrifugation at 130,000 ×g for 45 min with a Type 70 Ti Rotor (Beckman Coulter). The supernatant was filtered through a 0.22 μm filter (Sigma ...
-
bioRxiv - Cell Biology 2021Quote: ... The cell lysate was clarified via centrifugation at 66,000 x g for 30 min in a Type 70 Ti rotor (Beckman Coulter) at 4°C ...
-
bioRxiv - Biochemistry 2020Quote: ... After increasing the NH4Cl concentration of the supernatant to 1 M to dissociate bS1 from 70S ribosomes the sample was centrifuged in a Type 70 Ti rotor (Beckman) at 60,000 g for 2 hours ...
-
bioRxiv - Microbiology 2020Quote: ... the sample was centrifuged for 16 h at 4°C and 100,000 rcf using a type 70 Ti rotor (Beckman Coulter). The pellet was gently washed with 500 μl of storage buffer (lysis buffer C + 10% (v/v ...
-
bioRxiv - Molecular Biology 2022Quote: ... The lysate was clarified at 503,000 rcf for 45 min at 4°C using a Type 70 Ti Rotor (Beckman Coulter). The supernatant was incubated with 3 mL IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Microbiology 2022Quote: Extracellular HSV-1 or HSV-2 particles were harvested by sedimentation at 12,000 rpm for 90 minutes at 4°C (Type 19 rotor, Beckman-Coulter) from the medium of BHK-21 cells (40 x 175 cm² flasks ...
-
bioRxiv - Molecular Biology 2020Quote: ... Ultracentrifugation was performed using a SW Type 32.1 Ti rotor in Optima XPN-100 Ultracentrifuge (Beckman Coulter, Brea, CA, USA) at 186,000g for 18 h at 4 °C ...
-
bioRxiv - Biochemistry 2020Quote: ... by dounce homogenization (20 strokes) and the homogenate was centrifuged at 55,000 rpm in a Type 70 Ti rotor (Beckman Coulter) for 1 hr ...
-
bioRxiv - Neuroscience 2021Quote: ... The EV pellet was resuspended in PBS and centrifuged at 40,000 rpm for 70 min using the type 70 Ti rotor in an Optima XPN-80 ultracentrifuge (Beckman Coulter). The pellet obtained after this last centrifugation step was the purified EV fraction ...
-
bioRxiv - Biochemistry 2019Quote: ... Ribosomes were pelleted via centrifugation at 63,000 x g for 16-18 hours at 4°C using a Type 80 Ti rotor (Beckman Coulter). Ribosome pellets were dissolved in resuspension buffer (20 mM Tris-HCl pH 7.5 ...
-
bioRxiv - Biochemistry 2019Quote: ... Fractions containing 40S and 60S ribosomal subunits as identified via absorption at 254 nM were pelleted via centrifugation at 63,000 x g for 20 hours at 4°C using a Type 80 Ti rotor (Beckman Coulter). Ribosomal subunits were resuspended in storage buffer (30 mM HEPES-KOH pH 7.4 ...
-
bioRxiv - Molecular Biology 2020Quote: ... by centrifuging at 63,000 x g for 18 hrs at 4°C using a Type 80 Ti rotor (Beckman Coulter). Pellets were resuspended and these samples were analysed by mass spectrometry.
-
bioRxiv - Biochemistry 2021Quote: ... The supernatant from this step was then subjected to ultracentrifugation at 200,000g for 35 min (Beckman Type 45 Ti rotor) to collect microsomes ...
-
bioRxiv - Microbiology 2020Quote: ... Whole-cell lysates were then spun at 35,000 rpm for 45 min in a Type 45 Ti rotor (Beckman Coulter). Subsequently ...
-
bioRxiv - Molecular Biology 2021Quote: ... lysates were spun for 24 h at 4°C at 50000 rpm in a Type 70 Ti rotor (Beckman Coulter) through a 40 % (w/v ...
-
bioRxiv - Immunology 2020Quote: ... all CCMV CP preparations were purified two times using an ultracentrifuge and 30% sucrose cushion – first with additional 0.5% Triton X-100 and the second time without Triton X-100 (4 h, 50 000 rmp, 4°C; Type 70Ti rotor, Beckman) and the pellet was then dissolved in buffer A ...
-
bioRxiv - Bioengineering 2022Quote: ... the conditioned media was subjected to an additional centrifugation step of 118,000 × g for 2 h in a Type 70 Ti ultracentrifuge rotor (Beckman Coulter). The resulting EV pellet was resuspended in 1X PBS and placed into a Nanosep 300 kDa MWCO spin column (Pall ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... Ribosomes were pelleted by centrifugation at 63,000g for 16–19 hrs at 4°C using a Type 80 Ti rotor (Beckman Coulter). For all ultracentrifugation steps indicated here ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... were pelleted by centrifugation at 63,000g for 20 hrs at 4°C in a Type 80 Ti rotor (Beckman Coulter) as described above ...
-
bioRxiv - Microbiology 2022Quote: ... The sample-containing tube was spun at 347,000 × g and 20°C for 3 hours using Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Neuroscience 2023Quote: Monomeric wild-type α-syn was ultracentrifuged at 90,000 RCF for 1 hour at 4 °C to remove any amorphous aggregates (Beckman Coulter Optima Max-XP with MLA-130 rotor) ...
-
bioRxiv - Molecular Biology 2023Quote: ... Cells were lysed by sonication and the lysate was clarified at 150,000 rcf for 30 min at 4°C using a Type 45 Ti Rotor (Beckman Coulter). The lysate was passed three times though 2mL of pre-equilibrated Ni-NTA Agarose beads (Qiagen ...
-
bioRxiv - Molecular Biology 2023Quote: ... Cells were lysed by sonication and the lysate was clarified at 150,000 rcf for 30 min at 4°C using a Type 45 Ti Rotor (Beckman Coulter). The lysate was passed three times through 2 mL of pre-equilibrated Ni-NTA Agarose beads (Qiagen ...
-
bioRxiv - Molecular Biology 2023Quote: ... The lysate was clarified at 150,000 rcf for 45 min at 4°C using a Type 45 Ti Rotor (Beckman Coulter). The supernatant was incubated with 3 mL IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Molecular Biology 2023Quote: ... The lysate was clarified at 150,000 rcf for 30 min at 4°C using a Type 45 Ti Rotor (Beckman Coulter). The supernatant was incubated with 3 mL IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Molecular Biology 2023Quote: ... The lysate was clarified at 503,000 rcf for 45 min at 4°C using a Type 70 Ti Rotor (Beckman Coulter). The supernatant was incubated with 3 mL IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Biochemistry 2023Quote: Sedimentation of high molecular weight species before aggregation was carried out using a Type 50.2 Ti fixed-angle rotor in an Optima Ultracentrifuge (Beckman Coulter). Samples were centrifuged at 40,000 rpm (average 146,000 g) ...
-
bioRxiv - Biochemistry 2023Quote: ... The diluted extract was then centrifuged at 31,200 rpm for 30 minutes at 4°C in a Type 70 Ti rotor (Beckman Coulter). The supernatant was filtered through a 0.45 µm syringe filter (Millex-GP PES membrane (Millipore SLHP033RS ...
-
bioRxiv - Biochemistry 2023Quote: ... by dounce homogenization (20 strokes).The lysate was clarified by centrifugation at 56,000 rpm in a Type 70 Ti rotor (Beckman Coulter) at 4°C for 1 hour ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was centrifuged at 40,000 rpm for 60 min at 4°C (XPN-100 ultracentrifuge, Type 45 Ti rotor, Beckman, USA). The supernatant was filtered through a 0.45 μm filter (Pall ...
-
bioRxiv - Biophysics 2023Quote: ... The lysate was clarified by centrifugation at 40,000 rpm for 35 min at 4°C (Type 45 Ti Rotor, Beckman Coulter). The resulting supernatant was mixed with 1ml pre-washed IgG Sepharose 6 FastFlow beads (Cytiva ...
-
bioRxiv - Cell Biology 2023Quote: ... Samples were ultracentrifuged at 4 °C and 150,000 ˗ g for 2 h (Optima L-80 XP Ultracentrifuge with Type 70.1 Ti Fixed-Angle Titanium Rotor (Beckman Coulter)) and supernatants were removed ...
-
bioRxiv - Cell Biology 2023Quote: ... The concentrated CFS was then ultracentrifuged at 100,000 ˗ g and 4 °C for 3 h (Optima L-80 XP Ultracentrifuge with Type 70.1 Ti Fixed-Angle Titanium Rotor (Beckman Coulter)) ...
-
bioRxiv - Neuroscience 2024Quote: ... The supernatant was ultracentrifuged at 80,000 × g for 1 h at 4°C using a type 50 Ti rotor ultracentrifuge (Beckman Coulter). The supernatant ...
-
bioRxiv - Bioengineering 2024Quote: ... The sample tubes were then centrifuged at 347,000 × g and 20°C for 3 hours using a Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Biochemistry 2020Quote: ... Lysates were cleared by ultracentrifugation (40 000 rpm for 30 min at 4°C in a Beckman Ti45 rotor). Supernatant was filtered (0.45 μm ...
-
bioRxiv - Cell Biology 2020Quote: ... Samples were centrifuged for 20 h at 190,000 x g in a SW-40 Rotor (Beckman Optima L-70 or Beckman Optima L-80 XP ...
-
bioRxiv - Cell Biology 2021Quote: ... the soluble fraction was collected by centrifugation at 40 000 rpm for 30 min in a Ti45 rotor (Beckman). The fusion protein was purified from the soluble fraction using glutathione-Sepharose 4B beads at a vol/vol ratio of 4 ml beads for 100 ml supernatant ...
-
bioRxiv - Microbiology 2020Quote: ... The gradient was centrifuged for 17 h at 4°C and 100,000 rcf (23,700 rpm) using an SW 40 Ti rotor (Beckman Coulter), followed by manual fractionation into 20 590 μl fractions and measurement of the A260 nm of each fraction ...
-
bioRxiv - Neuroscience 2022Quote: ... The homogenates were then centrifuged for 40 min at 350,000 g in 500 μL polycarbonate centrifuge tubes (Beckman Coulter) at 4°C in an Optima MAX-XP Ultracentrifuge with a TLA 120.1 rotor (Beckman Coulter) ...
-
bioRxiv - Physiology 2022Quote: ... After incubation for 40 minutes on ice and subsequent centrifugation for 30 min at 27000 rpm (Beckman coulter, Ti70) the pellet was resuspended in myosin buffer (0.3 mM KCl ...
-
bioRxiv - Biochemistry 2020Quote: ... The material was centrifuged for 40 min at 14,000 rpm in a JA-12 rotor (Beckman Coulter, Brea, CA) at 4°C and the supernatant was loaded onto a 1 ml nickel nitrilotriacetic acid-agarose column (Ni-NTA ...
-
bioRxiv - Biochemistry 2022Quote: ... The elutions were combined and centrifuged at 100,000 rpm at 4°C for 40 minutes in a TLA120.2 rotor (Beckman Coulter) before resuspension of the ribosomal pellet in RNC buffer containing 1 μM ternatin-4 ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was centrifuged at 4°C and 35,000 rpm for 2.5 h using an SW 40 Ti rotor (Beckman Coulter). Afterward ...
-
bioRxiv - Microbiology 2022Quote: ... the cross-linked material was loaded onto glycerol-tartrate gradients as described elsewhere 53 and centrifuged for 1 h at 25,000 rpm in an SW-40 rotor (Beckman), with brakes set at the slowest possible deceleration ...
-
bioRxiv - Plant Biology 2023Quote: ... Extract was then centrifuged at 40 000 rpm for 2 hours at 4°C using the 50Ti rotor (Beckman). A protocole previsouly used in the laboratory and described in Maclot et al ...