Labshake search
Citations for Beckman :
201 - 250 of 1877 citations for 7 Oxabicyclo 4.1.0 hepta 2 4 diene 1 3 4 trifluoro 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Systems Biology 2019Quote: ... at 4°C using Beckman SW55 rotor (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Microbiology 2022Quote: ... at 4°C cells were resuspended in Isoflow (Beckman) for further reading the percentage of fluorescent labelled cells on the cytometer (FC500 ...
-
bioRxiv - Microbiology 2022Quote: ... 4 °C (SW41 Ti Swinging-Bucket rotor, Beckman & Coulter). Bands containing virus particles were extracted with a syringe ...
-
bioRxiv - Biochemistry 2023Quote: ... counted using a coulter counter (Beckman Coulter, Multisizer 4) and seeded onto 24-well dishes (Nunc ...
-
bioRxiv - Molecular Biology 2022Quote: ... and centrifuged at 100,000 g for 1 h at 4°C in a TLA100.3 rotor (Beckman Coulter). Top (T ...
-
bioRxiv - Neuroscience 2021Quote: ... it was centrifuged at 110 000×g for 1 hour at 4°C (Optima TLX Ultracentrifuge, Beckman) and the fat-free infranatant was used for HSL activity measurements ...
-
bioRxiv - Physiology 2023Quote: ... and centrifuged at 12,000g for 1 hour at 4°C (SW-41Ti rotor, Beckman Coulter, Pasadena, California). Six or seven fractions were collected from the top ...
-
bioRxiv - Cell Biology 2023Quote: ... were spun at 100,000 x g for 1 hr at 4 oC a TLA100 rotor (Beckman-Coulter). After conversion of Ca2+-ATP-actin to Mg2+-ATP-actin ...
-
bioRxiv - Biochemistry 2023Quote: ... the solution was ultracentrifuged at 91,000 g at 4 °C for 1 hour (Optima TLX Ultracentrifuge, Beckman). The concentration of the supernatant was then determined by A280 (ε280 = 5,960 M−1 cm−1) ...
-
bioRxiv - Biophysics 2022Quote: ... Fractions of EV-specific density were then pooled together and subsequently concentrated via ultracentrifugation (100,000 × g, 4 h, 4 °C) through a 20% w/v sucrose cushion in a SW41 rotor (Beckman Coulter, Fullerton, CA, USA). The resulting supernatant was discarded ...
-
bioRxiv - Immunology 2021Quote: ... The pelleted exosomes from above supernatants were further centrifuged at 100,000g (26,450rpm) for 2 h at 4 °C (Beckman Coulter, Optima XE-90) and resuspended in PBS ...
-
bioRxiv - Microbiology 2021Quote: ... Samples were centrifuged at 130,000 × g for 2 h at 4°C in a TLA100.3 rotor (Beckman Optima TLX table top centrifuge). Following centrifugation ...
-
bioRxiv - Neuroscience 2021Quote: ... The post nuclear supernatant was transferred to an ultracentrifuge tube and centrifuged for 2 h at 245,000 g at 4 °C in a Beckman L90 Ultracentrifuge (Beckman Coulter, Mississauga, Canada) to pellet remaining membrane.
-
bioRxiv - Immunology 2022Quote: ... Ultracentrifugation in a Beckman L7-65 ultracentrifuge at 25,000 rpm for 2 hours at 4°C using a Beckman SW28 rotor (Beckman Coulter, CA, USA) was performed to pellet the viruses through the sucrose cushion while soluble egg proteins were removed ...
-
bioRxiv - Microbiology 2019Quote: ... and viruses were pelleted via ultracentrifugation for 2 hours at 125,000 x g at 4°C using an SW55-Ti rotor (Beckman Coulter, Indianapolis, IN). Following centrifugation ...
-
bioRxiv - Pathology 2020Quote: ... Hemocytes stained with 4’-6-diamidino-2-phenylindole (DAPI) were analyzed on a CytoFLEX flow cytometer with CytExpert software (Beckman-Coulter, USA). Plots of side scatter SSC-A versus forward scatter FSC-A were used for visualization of cell groups ...
-
bioRxiv - Cell Biology 2023Quote: ... cells were blocked in 2% human serum and PBS for 30 min at 4°C and stained with DC-SIGN (Beckman Coulter #A07407), CD80 (BioLegend #305214) ...
-
bioRxiv - Plant Biology 2023Quote: ... 700 μl of obtained extract was applied to a chilled sucrose density gradient and centrifuged at 4 °C for 2 hours 45 minutes at 151,000 ×g using the SW 41 Ti rotor (Beckman Culture Life Sciences). After centrifugation ...
-
bioRxiv - Molecular Biology 2023Quote: ... The lysates were loaded onto the sucrose gradients and centrifuged at 40’000 rpm for 2 h at 4°C using the SW 41 Ti rotor (Beckman Coulter, Cat# 331362). Subsequently ...
-
bioRxiv - Biochemistry 2023Quote: ... Samples were centrifuged at 100,000 × g for 2 hr at 4 °C (Type 50.2 Ti Fixed angle ultracentrifuge rotor, Beckman Coulter, Brea, CA, USA). The supernatants were aspirated ...
-
bioRxiv - Cell Biology 2024Quote: ... Samples were centrifuged at 60,000 rpm at 4°C for 2 h on an SW65 Ti ultracentrifuge rotor (Beckman Coulter, California, USA). The pellets were gently washed by dispensing and removing 500 µl of ice-cold RNase-free water ...
-
bioRxiv - Cancer Biology 2019Quote: ... 10,000 × g (30 minutes at 4°C) and 100,000 × g (120 minutes at 4°C) by using a Beckman ultracentrifuge (AvantiJ-30I; Beckman Coulter, Inc., Brea, CA, USA). The final sediment was resuspended in the ExoQuick-TC exosome precipitation solution (System Biosciences ...
-
bioRxiv - Biophysics 2021Quote: ... centrifuged (Beckman Avanti, 1500 x g, 10 min, 4 °C) and pellets were flash-frozen and stored at −80 °C.
-
bioRxiv - Cell Biology 2021Quote: ... for 5 minutes at 4°C with TLA100 rotor (Beckman). 100 µg cell lysate was brought to a final volume of 250 µl BRB80 supplemented with 1 mM GTP ...
-
bioRxiv - Immunology 2022Quote: ... for 90 minutes at 4°C (Optima XE-90, Beckman-Coulter with SW 32 Ti swinging bucket rotor ...
-
bioRxiv - Molecular Biology 2022Quote: ... and ultracentrifuged (60,000 rpm, 4 °C, Beckman, 70 Ti rotor) for 20 hours ...
-
bioRxiv - Synthetic Biology 2020Quote: ... After clarification (20,000 rpm, Beckman JA 25.5, 30min 4°C), lysate was incubated with Glutathione S-sepharose 4B resin (GE Healthcare ...
-
bioRxiv - Biochemistry 2021Quote: ... Following centrifugation (Beckman SW40 rotor, 105,400xg, 18 h, 4°C), the heavier green band was collected and precipitated using 8% PEG6000 (Hampton Research ...
-
bioRxiv - Immunology 2020Quote: ... for 90 minutes at 4°C (Optima XE-90, Beckman-Coulter with SW 32 Ti swinging bucket rotor ...
-
bioRxiv - Cell Biology 2022Quote: ... at 4°C in a TLA-55 rotor (Beckman Coulter) at maximum speed (186000 g ...
-
bioRxiv - Biochemistry 2023Quote: ... 4 °C (Fixed angle Ti90 Rotor, Optima XE90, Beckman Coulter). The supernatant was loaded onto a 70 ml Q-sepharose column (XK 26/20 ...
-
bioRxiv - Bioengineering 2023Quote: ... the centrifugation at 12,000 rpm 4 ℃ (Beckman Avanti J-26) for 30 mins was performed to remove cell debris ...
-
bioRxiv - Cell Biology 2020Quote: ... Samples were ultracentrifuged at 95,000 rpm at 4°C for 1 h and 40 min using a TLA100.2 rotor (Beckman). Supernatants were saved if needed for further analysis ...
-
bioRxiv - Molecular Biology 2022Quote: ... The solution was centrifuged for 1 h at 4°C and 45,000 rpm (Type 45 Ti rotor, Beckman) and the supernatant was bound to 2 mL (CV ...
-
bioRxiv - Cell Biology 2023Quote: ... 10% and 6% and ultracentrifuged at 187,000xg for 1:30h at 4°C in Sw32.1Ti rotor (Beckman Coulter). Afterwards ...
-
bioRxiv - Biophysics 2023Quote: ... 1 mM DTT) and spun at 32,600 × g for 15 h at 4° in SW32 rotor (Beckman Coulter). Ribosome fractions were pooled as shown in Figure 2D ...
-
bioRxiv - Developmental Biology 2023Quote: ... Peptide supernatant was cleared by ultracentrifugation at 100,000□g for 1 hour at 4□°C (Beckman Coulter, 343775), then vacuum-dried overnight.
-
bioRxiv - Biophysics 2023Quote: ... the supernatant was layered onto PBS/1.5 M sucrose solution in sample/sucrose 4:1 ratio and ultracentrifuged at 264,000 × g on Optima TLA 100.3 ultracentrifuge (Beckman for 2 h at 4°C ...
-
bioRxiv - Microbiology 2021Quote: ... and extracellular vesicles including exosomes and virions were pelleted by ultracentrifugation at 141,000 g at 4 °C for 2 h in a swinging-bucket rotor (SW28; Beckman Coulter, Brea, CA, USA). The pellet was resuspended in filtered PBS and centrifuged at 18,300 g and 4°C for 10 min to remove insoluble aggregates ...
-
bioRxiv - Genomics 2020Quote: ... were layered onto a 1.8M sucrose cushion and ultra-centrifuged at 24,400 rpm at 4°C for 2 hours using a SW28 swinging bucket rotor (Beckman Coulter Optimal centrifuge #L90K). The nuclear pellet was re-suspended in 2% BSA in 1X PBS ...
-
bioRxiv - Microbiology 2020Quote: ... EMVs were obtained by ultracentrifugation from 4 mL of filtrate at 100,000 × g (average centrifugal force) and 4°C for 2 h with an OptimaX centrifuge (Beckman Coulter, Brea, CA, USA). The pellets were resuspended in 400 μL of Dulbecco’s phosphate-buffered saline (DPBS ...
-
bioRxiv - Neuroscience 2022Quote: ... The tubes were sealed and centrifuged at 50,000 rpm at 4°C for 2 h in an OptimaTM L-90K ultracentrifuge using the 70.1Ti rotor (Beckman Coulter, Brea, CA, USA). After the centrifugation ...
-
bioRxiv - Bioengineering 2021Quote: ... or 7-Amino-Actinomycin D (7-AAD, Beckman Coulter, B88526) was added to the cell suspensions ...
-
bioRxiv - Molecular Biology 2019Quote: ... The 80S fraction was pelleted for 1 h at 436000 x g at 4 °C (TLA-100, Beckman Coulter), resuspended in 20 mM HEPES pH 7.4 ...
-
bioRxiv - Biophysics 2020Quote: ... and centrifuged at 287,582 x g (90,000 rpm) for 1 hr at 4 °C in a TLA100.2 rotor (Beckman, ref. 362046) in 11×34 mm thick-wall polycarbonate ultracentrifuge tubes (Beckman ...
-
bioRxiv - Biochemistry 2022Quote: ... The crude extract was centrifuged at 200,000 g for 1 h at 4 °C (Beckman Coulter Optima LE-80K). The membrane pellet was homogenized and solubilized in 20 mM HEPES (pH 7.8 ...
-
bioRxiv - Microbiology 2019Quote: ... The concentrated vesicles were washed twice with PBS by ultracentrifugation at 110,000xg at 4°C for 1 hour (Beckman Optma MAX-XP Ultracentrifuge ...
-
bioRxiv - Biochemistry 2021Quote: ... Reaction mixtures were incubated for 30 minutes and centrifuged at 100,000g at 4°C for 1 hr using a TLA100 fixed angle rotor (Beckman). The supernatant fraction was carefully removed ...
-
bioRxiv - Biochemistry 2019Quote: ... and centrifuged at 287,582 x g (90,000 rpm) for 1 hr at 4°C in a TLA100.2 rotor (Beckman, ref. 362046) in 11×34 mm thick-wall polycarbonate ultracentrifuge tubes (Beckman ...
-
bioRxiv - Microbiology 2022Quote: ... The post-nuclear supernatant was adjusted to 0.8 M sucrose and loaded in the middle of a step gradient ranging from 0.1 to 1.8 M sucrose in STKM buffer and centrifuged at 50’000 g for 1 h at 4°C in a TLA-120.1 fixed-angle rotor (Beckman Coulter). LDs formed a white cushion on top of the tube and were collected by aspiration of the upper fraction of the gradient (125 µl).