Labshake search
Citations for Beckman :
151 - 200 of 1456 citations for 7 Chloro 3 nitro 3 4 dihydro 1H quinolin 2 one since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2022Quote: ... phage suspension was layered on top of a 5–20 % sucrose (w/vol, in Tris-HCl pH 7.2 with 3 mM MgCl2 and 10 mM CaCl2) and centrifuged (Beckman Optima L-K90 ...
-
bioRxiv - Microbiology 2022Quote: ... The light-scattering zone was collected and further purified in 20– 70 % sucrose gradient (w/vol, in Tris-HCl pH 7.2 with 3 mM MgCl2 and 10 mM CaCl2) by centrifugation (Beckman Optima L-K90 ...
-
bioRxiv - Immunology 2022Quote: ... All experiments in this study were performed using a 3-laser CytoFLEX Flow Cytometer (Beckman Coulter, Brea, CA, USA) and operated using the CytExpert Software v2.4.0.28 (Beckman Coulter) ...
-
bioRxiv - Cell Biology 2020Quote: ... The harvested sEVs were resuspended with 3 mL double filtered PBS and centrifuged with MLA-55 rotor (Beckman Coulter) under 100,000 × g at 4 °C for 70 mins to remove non-EV contaminants ...
-
bioRxiv - Genetics 2019Quote: ... The relative growth rate was determined by counting cells over the 3 day period using Coulter Counter Z2 (Beckman).
-
bioRxiv - Neuroscience 2022Quote: ... myelin was layered onto 3 mL ice cold 0.85 M sucrose solution in a 10 mL ultracentrifuge tube (Beckman) before centrifugation at 75 000 x g for 30 min at 4 °C on a Beckman Ultracentrifuge with MLA-55 rotor (acceleration 7 ...
-
bioRxiv - Cell Biology 2023Quote: ... 0.01% Sodium Azide in PBS and measured by recording 3 × 104 events using CytoFLEX and Gallios cytometers (Beckman Coulter). The resulting data were analysed using FlowJo v10 (TreeStar) ...
-
bioRxiv - Cancer Biology 2022Quote: ... cells were treated with 20nM of gemcitabine and cells were counted 3 days later using the Z1 Coulter (Beckman).
-
bioRxiv - Bioengineering 2023Quote: ... MB concentration and number- and volume-weighted size distributions were measured using a Multisizer 3 Coulter Counter (Beckman Coulter). MB concentration (𝑐i ...
-
bioRxiv - Plant Biology 2024Quote: ... and centrifuged for 3 h at 260,000 g using an SW 55 Ti swinging-bucket rotor (Beckman Coulter, USA). The final supernatant was discarded ...
-
bioRxiv - Microbiology 2023Quote: ... and RNA were purified using 3 volume of absolute isopropanol and 1.8 volume of Agencourt RNAClean XP beads (Beckman). RNA was eluted with 6 µL of water ...
-
bioRxiv - Biochemistry 2023Quote: ... lysosomes and mitochondria were enriched by centrifugation of the pooled PNS at 56,500 ×g for 7 min at 4 °C (Beckman-Coulter, 70 Ti fixed-angle rotor). The supernatant was removed ...
-
bioRxiv - Biochemistry 2019Quote: ... After ultra-centrifugation (SW-60Ti rotor Beckman Coulter, 2 h, 100 000 rpm, 4°C) the gradient was manually fractioned in 200 μl fractions from the top to the bottom of the tube ...
-
bioRxiv - Microbiology 2020Quote: ... and overlaid with 6 ml of 30% and 3 ml of 5% sucrose (w/v) followed by centrifugation at 32,000 rpm in SW41 rotor (Beckman Coulter) for 20 h ...
-
bioRxiv - Molecular Biology 2020Quote: ... Debris was clarified by centrifuging at 18,000 ×g followed by fractionation on a discontinuous sucrose gradient (10-50 %) by ultracentrifugation at 39,000 rpm for 3 h in an SW41-Ti rotor (Beckman coulter). Monosome fractions were collected by pumping of Fluorinert FC-40 and using a fraction collector by measuring UV trace ...
-
bioRxiv - Molecular Biology 2020Quote: ... The gradient was formed by adding 3 mL of the iodixanol solutions to a 17 mL polypropylene tube (Beckman Coulter). Ultracentrifugation was performed using a SW Type 32.1 Ti rotor in Optima XPN-100 Ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Genomics 2019Quote: ... Samples were size selected using a 0.5X Ampure XP cleanup to remove large fragments followed by 3 consecutive 1.5X Ampure XP (Beckman Coulter # A63880) bead cleanup followed by a final 1.2X Ampure XP cleanup to completely remove all residual primers and resuspended in a final volume of 20 µL EB using the manufacturer’s recommended protocol.
-
bioRxiv - Cell Biology 2019Quote: ... Monosomes were isolated by sucrose gradients (10-50%) and centrifuged at 40,000 rpm for 3 hours in a SW41 rotor (Beckman Coulter). The extracted RNA was size-selected from 15% denaturing PAGE gels ...
-
bioRxiv - Cancer Biology 2020Quote: The barcode split of the cDNA amplification reaction (from 10x Single Cell 3’ v3 Step 2.2) was purified via 1.2x SPRI Select (Beckman Coulter #B23317). cDNA products were eluted in 40 µL of EB ...
-
bioRxiv - Neuroscience 2020Quote: ... reverse 5’-CTTA TTAGTCAGTCAGAAACAAC-3’).ThePCR amplicon was purified using RNAse-free SPRI beads (Agencourt RNAclean XP, Beckman-Coulter A63987) and then used for in vitro transcription with the HiScribe T7 ARCA mRNA Kit (with tailing ...
-
bioRxiv - Microbiology 2021Quote: 3 mL of pseudoparticles were pelleted using a TLA-55 rotor with an Optima-MAX-E ultracentrifuge (Beckman Coulter, Inc.) for 2 hours at 42,000 rpm at 4°C ...
-
bioRxiv - Microbiology 2020Quote: ... Supernatants (3 ml) were loaded on the top of step gradients preformed in polyallomer tubes (14 by 89 mm, Beckman), containing 2 ml each of 1.82 ...
-
bioRxiv - Molecular Biology 2020Quote: ... 1.3 M, 2.5 M) as indicated in the method (Vella et al., 2017) in ultra-clear SW40Ti tubes (Beckman Coulter). The sucrose gradients were centrifuged at 200,000 x g avg at 4°C for 173 min using a SW40Ti rotor (Beckman Coulter) ...
-
bioRxiv - Microbiology 2020Quote: ... was overlaid on 25% sucrose in PBS and centrifuged at 26,000 rpm for 3 h at 4C using SW28 rotor (Beckman Coulter). Pellets were dissolved in PBS overnight at 4C and 1/3 of used for RNA was extraction using Macherey Nagel Virus RNA isolation kit without carrier RNA according to the manufacturer’s recommendations ...
-
bioRxiv - Cell Biology 2020Quote: ... Samples are visualized on Cytoflex S, 3 lasers (488 nm, 405 nm and 638 nm) and 13 detectors (Beckman Coulter). Live cells were gated based on side scatter and forward scatter ...
-
bioRxiv - Molecular Biology 2020Quote: ... and the cleared supernatant was loaded on a 3 to 30% iodixanol gradient (OptiPrep) and ultracentrifuged for 5h at 36,000 rpm in an SW60 rotor (Beckman Coulter). Fractions were collected manually through aspiration and RNA or proteins were isolated for further analysis.
-
bioRxiv - Microbiology 2020Quote: ... The filtered supernatant was then spun through a 20% sucrose cushion at 48,000 rpm for 3 hours in a SW55Ti rotor (Beckman Coulter). The SVP pellets were resuspended in a 4X non-reducing buffer (Alfa Aesar ...
-
bioRxiv - Molecular Biology 2019Quote: ... Rnase-free sucrose) and gradients were centrifuged at 35,000 rpm for 3 hours 20 minutes using a SW41Ti rotor (Beckman Coulter). Absorbance was followed at 254 nm ...
-
bioRxiv - Microbiology 2021Quote: ... 60% w/v) and centrifuged at 64,000 x g for 3 hours in A27-8×50 mL rotor (Beckman Coulter). The visible virus bands were collected ...
-
bioRxiv - Immunology 2022Quote: ... The gradients were spun at 150,200 x g for 3 h in a SW41 Ti swinging-bucket rotor (Beckman Coulter). 13 fractions of 0.95 ml were collected from the top and subjected to TCA precipitation ...
-
bioRxiv - Microbiology 2022Quote: ... The sample-containing tube was spun at 347,000 × g and 20°C for 3 hours using Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Microbiology 2022Quote: ... HUVECs or LECs were infected for 3 days and the GFP positive population was quantified by CytoFLEX S (Beckman Coulter). Here ...
-
bioRxiv - Molecular Biology 2023Quote: ... The reactions were then layered on 100 μL of 32% sucrose cushion and centrifuged at 42,800 rpm for 3 hours in a Beckman TLA 100 rotor using the Optima-Max TL ultracentrifuge (Beckman Coulter). After centrifugation ...
-
bioRxiv - Cancer Biology 2024Quote: ... The fragments were repaired the 3’and 5’overhangs using End repair mix (component of SureselectXT) and purified using Agencourt AMPure XP Beads (Beckman). The purified fragments were added with ‘A’ tail using A tailing Mix (component of SureSelectXT ...
-
bioRxiv - Microbiology 2024Quote: ... The flow cytometry analysis of the bacterial cells present in the suspension was performed using a Cytoflex flow cytometer (CytoFLEX 3; Beckman) as previously described (Supplementary Fig ...
-
bioRxiv - Neuroscience 2024Quote: ... at a ratio of 1:2.3 before layering on 3 ml of SCB in a 12 ml Thinwall Ultra-clear centrifuge tubes (Beckman Coulter). Samples were centrifuged at 30,000 xg for 45 min at 4 °C using a SW41 Ti swinging bucket rotor (Beckman Coulter ...
-
bioRxiv - Bioengineering 2024Quote: ... The sample tubes were then centrifuged at 347,000 × g and 20°C for 3 hours using a Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Cell Biology 2021Quote: ... After centrifugation (285, 000 g for 2 h at 4 °C using a Beckman SW40Ti rotor), polysome profiles were recorded using an Äktaprime plus chromatography system (GE Healthcare) ...
-
bioRxiv - Microbiology 2022Quote: ... 4°C for 2 h (SW 32 Ti swinging-bucket rotor, Optima LE-80K Beckman Coulter) using a 25% w/v sucrose cushion ...
-
bioRxiv - Developmental Biology 2020Quote: ... products of one plate were pooled into one tube and cleaned up using AMPure XP beads (Beckman Coulter). After in vitro transcription and fragmentation ...
-
bioRxiv - Plant Biology 2020Quote: MP of pollen protoplasts was assessed by staining with 1 µM DiBAC4(3) for 5 min (Breygina et al. 2010) on Gallios flow cytometer (Beckman Coulter), analysis was performed with FlowJo software (TreeStar) ...
-
bioRxiv - Genetics 2020Quote: ... PCR products were pooled by region of interest using 2-3 μL of each reaction and the resulting pools of products were purified using a 1X Ampure XP cleanup (Beckman Coulter). Purified libraries were pooled and submitted for paired-end 150 cycle sequencing on an Illumina MiSeq ...
-
bioRxiv - Genomics 2021Quote: ... Cells were washed with 25 mm supplemented HBSS before depleting the sample of unnucleated cells using IOTest 3 Lysing solution (Beckman Coulter) following provider instructions ...
-
bioRxiv - Microbiology 2021Quote: ... triplicate spore preparations were made in 3 ml of 20% glycerol and suspended in Isoton II (Beckman Coulter, Brea, CA, USA). The particle volume was then measured for a minimum of 100 000 particles per sample using a Multisizer 4e Coulter counter (Beckman Coulter ...
-
bioRxiv - Cell Biology 2020Quote: ... with densities ranging from 1.10 to 1.15 were pooled and washed in PBS (Beckman Ti50, 3 h at 42 000 rpm).
-
bioRxiv - Microbiology 2022Quote: A 3 ml volume of pseudoparticles was pelleted using a TLA-55 rotor with an Optima-MAX-E ultracentrifuge (Beckman Coulter) for 2 hours at 42,000 rpm at 4°C ...
-
bioRxiv - Molecular Biology 2022Quote: ... Samples were then enriched in DNA sizes between 200 and 600 bp (corresponding to 1 to 3 nucleosomes) using AMPure XP magnetic beads (Beckman-Coulter), following the manufacturer’s guidelines ...
-
bioRxiv - Molecular Biology 2019Quote: ... Centrifugation was performed at 22 °C for 3 h at 217 874 g using a SW 40 Ti rotor (Beckman Coulter). Fractions of 600 µl were carefully collected manually ...
-
bioRxiv - Cell Biology 2020Quote: ... 3 ml of 50% and 3 ml of 40% sucrose) in Ultra-Clear Beckman tubes and centrifuged at 26000 rpm (SW32Ti rotor, Beckman Coulter) for 1 h at 4°C ...
-
bioRxiv - Biochemistry 2020Quote: ... and pelleted for 3 min in a swing-out rotor at 1000 rpm in a tabletop centrifuge (Allegra X-30R, Beckman Coulter). The supernatant was aspirated and cells were suspended in the remaining liquid to 1 × 105 – 1 × 107 cells/100 μl ...