Labshake search
Citations for Beckman :
551 - 600 of 1736 citations for 7 CHLORO 1 METHYL 1H PYRAZOLO 4 3 B PYRIDINE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2020Quote: ... via ultracentrifugation at 4°C at 31,000 x g in a SW32Ti swinging bucket rotor (Beckman Coulter). Viral pellets were then resuspended in complete medium at a 100-fold concentration compared to crude ...
-
bioRxiv - Biophysics 2020Quote: ... The plate was bolted to a Swinging-4-bucket rotor (from a Beckman Coulter, Allegra 6KR centrifuge). This plate+swinging bucket rotor assembly is referred to as the ‘CFM rotor’ or ‘rotor.’ Onboard components were attached to the CFM rotor using nuts and bolts of appropriate dimensions ...
-
bioRxiv - Biochemistry 2021Quote: ... 9 s relapse) and centrifuged twice at 11,000 x g for 20 min at 4°C (Beckman) to pellet cell debris ...
-
bioRxiv - Molecular Biology 2021Quote: ... Following ultra-centrifugation (100,000 x g; 4°C; 15 min; rotor TL-100; OptimaMax-XP, Beckman-Coulter), solubilized membrane protein samples (20μl extract with BN-PAGE loading buffer ...
-
bioRxiv - Microbiology 2019Quote: ... The samples were centrifuged at 158,000 × g for 18h at 4°C on a SW55Ti rotor (Beckman). Finally ...
-
bioRxiv - Microbiology 2019Quote: ... Sacculi were harvested (30 min, 139 699 x g, 4 °C; SW 60 Ti rotor, Beckman Coulter), washed 4 times in 3 mL water and resuspended in 1 mL water supplemented with 0.02% (w/v ...
-
Proteome of the secondary plastid of Euglena gracilis reveals metabolic quirks and colourful historybioRxiv - Evolutionary Biology 2019Quote: ... 5 ml each and was centrifuged in the SW-28 rotor at 87,041 × g (22,000 rpm) at 4°C for 4.5 h (L8-M Ultracentrifuge, Beckman). Ultracentrifugation separated the plastids from mitochondria and peroxisomes (Davis and Merrett 1973) ...
-
bioRxiv - Biophysics 2019Quote: ... The lysate was spun for 35 min at 35000 rpm at 4°C (Ti70 rotor, Beckman Coulter) and the supernatant was filtered through a 5 µm syringe filter (Millex ...
-
bioRxiv - Cell Biology 2021Quote: ... Cell lysates were cleared by centrifugation (55,000 rpm, 60 min, 4°C, 70 Ti rotor (Beckman Coulter)) ...
-
bioRxiv - Cell Biology 2021Quote: ... Cell lysates were cleared by centrifugation (50,000 rpm, 60 min, 4°C, 70 Ti rotor (Beckman Coulter)) ...
-
bioRxiv - Biophysics 2020Quote: ... Cells were collected by centrifuging for 10 min at 4 °C at 4,000g (JLA-9.1000, Beckman Coulter). The bacterial pellet was resuspended in 50 mM Tris-HCl pH 8.0 ...
-
bioRxiv - Biochemistry 2021Quote: ... pelleted at 30,000 x g for 25 min at 4 °C in a JA 25.50 rotor (Beckman), and resuspended in 25 ml of A1 buffer (300 mM NaCl ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... in 67 mM HEPES-KOH pH 7.2) after 2 h of ultracentrifugation (4 °C, 5000 RPM, Beckman SW41 ...
-
bioRxiv - Microbiology 2021Quote: ... cells were precipitated by multiple centrifugations steps (10,000 - 30,000 × g at 4 °C, Beckman Avanti J-30I) until the supernatant appeared clean ...
-
bioRxiv - Cell Biology 2022Quote: ... and 4 mM DTT)) were added to the flow chambers after centrifugation in an ultracentrifuge (Beckman Airfuge) at 119,000xg for 5 minutes ...
-
bioRxiv - Microbiology 2022Quote: ... 4 °C) in an Optima LE-80K ultracentrifuge with a 50.2 Ti rotor (Beckman-Coulter Life Sciences). Supernatants were removed ...
-
bioRxiv - Neuroscience 2023Quote: ... the C-tubes were quickly spun in a chilled (4°C) Allegra-30R centrifuge (#B08708, Beckman Coulter) with an SX4400 swinging bucket rotor to collect the samples in the bottom of the tubes ...
-
bioRxiv - Biophysics 2023Quote: ... the mixture was centrifugated for 30 min at 12,000 rpm and 4 °C (Beckman J2-21, USA), and iVCL supernatant was collected ...
-
bioRxiv - Biophysics 2023Quote: ... and centrifuged at 5000 xg for 30 minutes at 4°C and subsequently at 10000 xg (Beckman Coulter Optima L-90K with a SW40Ti rotor) ...
-
bioRxiv - Cell Biology 2023Quote: ... Centrifugations at 10,000 g (k-factor = 2547.2) and 100,000 g (k-factor = 254.7) were done at +4°C using polyallomer tubes (Beckman Coulter Inc. ...
-
bioRxiv - Genomics 2023Quote: ... the C-tubes were quickly spun in a chilled (4°C) Allegra-30R centrifuge (#B08708, Beckman Coulter) with an SX4400 swinging bucket rotor to collect the samples in the bottom of the tubes ...
-
bioRxiv - Biochemistry 2023Quote: ... Cells were harvested by centrifugation at ∼6250g for 15 min at 4°C (Beckman Coulter centrifuge, JLA8.1000).
-
bioRxiv - Molecular Biology 2023Quote: ... followed by ultracentrifugation at 70k RPM at 4⁰C for 2 h (Optima TLX ultracentrifuge, Beckman Coulter). Ribosome pellets were then resuspended in Trizol and extracted for RNA according to manufacturer’s instructions ...
-
bioRxiv - Cell Biology 2024Quote: ... 086 x g for 2.5 hours at 4°C using Optima L-100 XP ultracentrifuge (Beckman Coulter), and the pellet was resuspended in LHCN medium ...
-
bioRxiv - Cancer Biology 2024Quote: ... centrifuged twice at 100,000 × g for 2 h at 4°C (Beckman Coulter Optima XE-90 Ultracentrifuge). The supernatant was replaced with DPBS between ultracentrifugation spins ...
-
bioRxiv - Cell Biology 2020Quote: ... A 1:1 Ampure XP (Beckman Coulter) PCR purification step was performed followed by assessment of size distribution using an Agilent high-sensitivity DNA chip (Agilent technologies ...
-
bioRxiv - Microbiology 2020Quote: ... and overlaid with 6 ml of 30% and 3 ml of 5% sucrose (w/v) followed by centrifugation at 32,000 rpm in SW41 rotor (Beckman Coulter) for 20 h ...
-
bioRxiv - Molecular Biology 2020Quote: ... Debris was clarified by centrifuging at 18,000 ×g followed by fractionation on a discontinuous sucrose gradient (10-50 %) by ultracentrifugation at 39,000 rpm for 3 h in an SW41-Ti rotor (Beckman coulter). Monosome fractions were collected by pumping of Fluorinert FC-40 and using a fraction collector by measuring UV trace ...
-
bioRxiv - Molecular Biology 2020Quote: ... The gradient was formed by adding 3 mL of the iodixanol solutions to a 17 mL polypropylene tube (Beckman Coulter). Ultracentrifugation was performed using a SW Type 32.1 Ti rotor in Optima XPN-100 Ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Genomics 2019Quote: ... Samples were size selected using a 0.5X Ampure XP cleanup to remove large fragments followed by 3 consecutive 1.5X Ampure XP (Beckman Coulter # A63880) bead cleanup followed by a final 1.2X Ampure XP cleanup to completely remove all residual primers and resuspended in a final volume of 20 µL EB using the manufacturer’s recommended protocol.
-
bioRxiv - Cell Biology 2019Quote: ... Monosomes were isolated by sucrose gradients (10-50%) and centrifuged at 40,000 rpm for 3 hours in a SW41 rotor (Beckman Coulter). The extracted RNA was size-selected from 15% denaturing PAGE gels ...
-
bioRxiv - Cancer Biology 2020Quote: The barcode split of the cDNA amplification reaction (from 10x Single Cell 3’ v3 Step 2.2) was purified via 1.2x SPRI Select (Beckman Coulter #B23317). cDNA products were eluted in 40 µL of EB ...
-
bioRxiv - Neuroscience 2020Quote: ... reverse 5’-CTTA TTAGTCAGTCAGAAACAAC-3’).ThePCR amplicon was purified using RNAse-free SPRI beads (Agencourt RNAclean XP, Beckman-Coulter A63987) and then used for in vitro transcription with the HiScribe T7 ARCA mRNA Kit (with tailing ...
-
bioRxiv - Microbiology 2021Quote: 3 mL of pseudoparticles were pelleted using a TLA-55 rotor with an Optima-MAX-E ultracentrifuge (Beckman Coulter, Inc.) for 2 hours at 42,000 rpm at 4°C ...
-
bioRxiv - Microbiology 2020Quote: ... Supernatants (3 ml) were loaded on the top of step gradients preformed in polyallomer tubes (14 by 89 mm, Beckman), containing 2 ml each of 1.82 ...
-
bioRxiv - Molecular Biology 2020Quote: ... 1.3 M, 2.5 M) as indicated in the method (Vella et al., 2017) in ultra-clear SW40Ti tubes (Beckman Coulter). The sucrose gradients were centrifuged at 200,000 x g avg at 4°C for 173 min using a SW40Ti rotor (Beckman Coulter) ...
-
bioRxiv - Microbiology 2020Quote: ... was overlaid on 25% sucrose in PBS and centrifuged at 26,000 rpm for 3 h at 4C using SW28 rotor (Beckman Coulter). Pellets were dissolved in PBS overnight at 4C and 1/3 of used for RNA was extraction using Macherey Nagel Virus RNA isolation kit without carrier RNA according to the manufacturer’s recommendations ...
-
bioRxiv - Cell Biology 2020Quote: ... Samples are visualized on Cytoflex S, 3 lasers (488 nm, 405 nm and 638 nm) and 13 detectors (Beckman Coulter). Live cells were gated based on side scatter and forward scatter ...
-
bioRxiv - Molecular Biology 2020Quote: ... and the cleared supernatant was loaded on a 3 to 30% iodixanol gradient (OptiPrep) and ultracentrifuged for 5h at 36,000 rpm in an SW60 rotor (Beckman Coulter). Fractions were collected manually through aspiration and RNA or proteins were isolated for further analysis.
-
bioRxiv - Microbiology 2020Quote: ... The filtered supernatant was then spun through a 20% sucrose cushion at 48,000 rpm for 3 hours in a SW55Ti rotor (Beckman Coulter). The SVP pellets were resuspended in a 4X non-reducing buffer (Alfa Aesar ...
-
bioRxiv - Molecular Biology 2019Quote: ... Rnase-free sucrose) and gradients were centrifuged at 35,000 rpm for 3 hours 20 minutes using a SW41Ti rotor (Beckman Coulter). Absorbance was followed at 254 nm ...
-
bioRxiv - Microbiology 2021Quote: ... 60% w/v) and centrifuged at 64,000 x g for 3 hours in A27-8×50 mL rotor (Beckman Coulter). The visible virus bands were collected ...
-
bioRxiv - Immunology 2022Quote: ... The gradients were spun at 150,200 x g for 3 h in a SW41 Ti swinging-bucket rotor (Beckman Coulter). 13 fractions of 0.95 ml were collected from the top and subjected to TCA precipitation ...
-
bioRxiv - Microbiology 2022Quote: ... The sample-containing tube was spun at 347,000 × g and 20°C for 3 hours using Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Microbiology 2022Quote: ... HUVECs or LECs were infected for 3 days and the GFP positive population was quantified by CytoFLEX S (Beckman Coulter). Here ...
-
bioRxiv - Molecular Biology 2023Quote: ... The reactions were then layered on 100 μL of 32% sucrose cushion and centrifuged at 42,800 rpm for 3 hours in a Beckman TLA 100 rotor using the Optima-Max TL ultracentrifuge (Beckman Coulter). After centrifugation ...
-
bioRxiv - Cancer Biology 2024Quote: ... The fragments were repaired the 3’and 5’overhangs using End repair mix (component of SureselectXT) and purified using Agencourt AMPure XP Beads (Beckman). The purified fragments were added with ‘A’ tail using A tailing Mix (component of SureSelectXT ...
-
bioRxiv - Microbiology 2024Quote: ... The flow cytometry analysis of the bacterial cells present in the suspension was performed using a Cytoflex flow cytometer (CytoFLEX 3; Beckman) as previously described (Supplementary Fig ...
-
bioRxiv - Bioengineering 2024Quote: ... The sample tubes were then centrifuged at 347,000 × g and 20°C for 3 hours using a Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Biochemistry 2020Quote: ... Lysates were cleared by ultracentrifugation (25000 rpm for 30 min at 4°C using a Beckman Ti45 rotor). Supernatant was filtered (0.45 μm ...