Labshake search
Citations for Beckman :
101 - 150 of 2616 citations for 6H Benzo g 1 4 diazonino 7 6 5 cd indol 6 one 10 ethenyl 1 3 4 5 7 8 10 11 12 13 decahydro 4 hydroxymethyl 8 10 13 trimethyl 7 13 bis 1 methylethyl 4S 4R* 7R* 10S* 13S* 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2022Quote: ... and centrifuged (400×g for 5 min at 4°C) using a swinging bucket rotor (Beckman Coulter Avanti J-15RIVD with JS4.750 swinging bucket ...
-
bioRxiv - Microbiology 2020Quote: ... Then 4 ml of the adjusted lipoprotein was layered under 8 ml of 0.9% NaCl and centrifuged at 49,000 rpm for 4 hours at 10°C (NVTi 65 rotor; Beckman). The HDL (lower band ...
-
bioRxiv - Cell Biology 2023Quote: ... Cells were harvested by two rounds of centrifugation (6,000 rpm, 10 min, 4°C, JLA-9.1000 rotor; Beckman), resuspended in Buffer A containing 50 mM Tris-HCl pH8.0 ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... 40 min at 20 000 g (8 °C, 11 300 RPM, Beckman JA-13.1) to run a 30 ml 20% Percoll purification (in 250 mM Sorbitol ...
-
bioRxiv - Cell Biology 2021Quote: ... for 5 minutes at 4°C with TLA100 rotor (Beckman). 100 µg cell lysate was brought to a final volume of 250 µl BRB80 supplemented with 1 mM GTP ...
-
bioRxiv - Biophysics 2020Quote: ... Cells were harvested by centrifugation for 10 min at 6000 × g (Beckman J-10; Beckman Instruments, Inc.), and the pellets were stored at −20 °C until further use.
-
bioRxiv - Biophysics 2020Quote: ... Cells were harvested by centrifugation for 10 min at 6000 × g (Beckman J-10; Beckman Instruments, Inc.), and the pellets were stored at −20 °C until further use.
-
bioRxiv - Biophysics 2023Quote: ... Cells were harvested by centrifugation for 10 min at 5000 × g (Beckman J-10; Beckman Instruments,Inc.), and the pellets were stored at -20 °C until further use ...
-
bioRxiv - Biophysics 2023Quote: ... Cells were harvested by centrifugation for 10 min at 5000 × g (Beckman J-10; Beckman Instruments,Inc.), and the pellets were stored at -20 °C until further use ...
-
bioRxiv - Biochemistry 2020Quote: ... mixed for 10 minutes at 4°C and centrifuged at 25,000 rpm for 45 minutes (Beckman Ti-45 rotor). The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor ...
-
bioRxiv - Genetics 2022Quote: ... The lysate was centrifuged at 2000 rpm for 10 min at 4 °C in a JA-20 rotor (Beckman). The supernatant from the previous step was centrifuged in a Beckman Coulter high speed centrifuge equipped with a JA-20 rotor at 6000 rpm for 20 min at 4 °C ...
-
bioRxiv - Biochemistry 2022Quote: ... mixed for 10 minutes at 4°C and centrifuged at 25,000 rpm for 45 minutes (Beckman Ti-45 rotor). The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor ...
-
bioRxiv - Systems Biology 2020Quote: ... the 500xg supernatant from enzymatic digestion of cardiovascular tissues underwent further ultracentrifugation at 10,000xg for 10 minutes at 4°C (Beckman Coulter ...
-
bioRxiv - Biochemistry 2021Quote: ... and 10 mM NH4Cl) and centrifuged for 16 h at 4°C with 18,000 rpm in an SW60Ti rotor (Beckman). Gradients were hand-fractionated and ribosome concentrations were determined by absorbance at 260 nm (A260 ...
-
bioRxiv - Neuroscience 2023Quote: ... The pellet was resuspended in 4.5 volumes of ice-cold extraction buffer and re- centrifuged at 11,300 RPM for 10 min at 4°C using a Ti45 rotor (Beckman). The supernatant was filtered through a 70 μm pore size cell-strainer and combined with the first supernatant ...
-
bioRxiv - Neuroscience 2023Quote: ... The homogenate was centrifuged at 11,300 revolutions per minute (RPM) for 10 min at 4°C using a Ti45 rotor (Beckman). The supernatant was filtered through a 70 μm pore size cell-strainer and retained on ice ...
-
bioRxiv - Immunology 2022Quote: ... then samples were centrifuged at 2,700 RPM for 10 minutes at 4°C in a tabletop centrifuge (Beckman Coulter). The supernatant (serum ...
-
bioRxiv - Microbiology 2020Quote: ... Unsieved soil samples were suspended in water and analyzed on a LS 13 320 Series Laser Diffraction Particle Size Analyzer (Beckman Coulter Brea CA 92821). Particle sizes were grouped according USDA soil texture classification ...
-
bioRxiv - Cancer Biology 2022Quote: ... Fractions 2–9 were diluted 1:10 in PBS and centrifuged at 20,000 ×g (bEVs) or 100,000 ×g (sEVs) at 4°C for 1 h with an MLS-55 rotor (Beckman Coulter). The bEV and sEV pellets were suspended in double 0.22-µm-filtered PBS and were either used directly for experiments or stored in aliquots at −80°C until subsequent BLI ...
-
bioRxiv - Cell Biology 2020Quote: ... and then centrifuged (300 g for 5 min at 4 °C) (Allegra X-30R Centrifuge, Beckman Coulter, USA) to obtain the myofiber-associated cell pellet ...
-
bioRxiv - Cell Biology 2020Quote: ... and then centrifuged (300 g for 5 min. at 4 °C) (Allegra X-30R Centrifuge, Beckman Coulter, USA) to obtain the myofiber-associated cell pellet ...
-
bioRxiv - Cell Biology 2020Quote: ... and then centrifuged (300 g for 5 min. at 4 °C) (Allegra X-30R Centrifuge, Beckman Coulter, USA) to obtain the myofiber-associated cell pellet ...
-
bioRxiv - Biochemistry 2020Quote: ... Protein expression was continued for 24 h before harvesting cells by centrifugation (4°C, 8000 rpm, 10 min in Beckman Coulter Avanti JXN-26 centrifuge ...
-
bioRxiv - Biochemistry 2020Quote: ... Protein expression was continued for 18 h before harvesting cells by centrifugation (4°C, 8000 rpm, 10 min in Beckman Coulter Avanti JXN-26 centrifuge ...
-
bioRxiv - Plant Biology 2020Quote: ... the cells were harvested by centrifuging for 30 min at 4°C and 6,000 rpm (JA-10, Beckman Coulter®). The cells were resuspended in 1x PBS (pH 7.3 ...
-
bioRxiv - Cell Biology 2022Quote: ... The lysate was dounced for 10 strokes on ice and cleared via centrifugation at 80K rpm for 10 minutes at 4°C using a TLA 110 rotor (Beckman) in a tabletop Beckm an ultracentrifuge ...
-
Comparative membrane proteomics reveals diverse cell regulators concentrated at the nuclear envelopebioRxiv - Cell Biology 2023Quote: ... The whole cell homogenate was layered on top of 2 ml shelf of 0.8 M sucrose in HB and centrifuged at 2000 rpm for 10 min at 4°C in a JS5.2 rotor (Beckman Coulter) to yield a low speed nuclear pellet and a postnuclear supernatant ...
-
bioRxiv - Molecular Biology 2024Quote: ... the mixture was spun at 13,894 rpm (16,000 rcf) at 4 ºC for 10 min using the SX241.5 rotor in an Allegron X-30R centrifuge (Beckman Coulter). The beads that accumulated at the bottom of the tube were resuspended in 200 µL of EM buffer A ...
-
bioRxiv - Molecular Biology 2022Quote: ... and centrifuged at 100,000 g for 1 h at 4°C in a TLA100.3 rotor (Beckman Coulter). Top (T ...
-
bioRxiv - Neuroscience 2021Quote: ... it was centrifuged at 110 000×g for 1 hour at 4°C (Optima TLX Ultracentrifuge, Beckman) and the fat-free infranatant was used for HSL activity measurements ...
-
bioRxiv - Biochemistry 2023Quote: ... the solution was ultracentrifuged at 91,000 g at 4 °C for 1 hour (Optima TLX Ultracentrifuge, Beckman). The concentration of the supernatant was then determined by A280 (ε280 = 5,960 M−1 cm−1) ...
-
bioRxiv - Cell Biology 2023Quote: ... were spun at 100,000 x g for 1 hr at 4 oC a TLA100 rotor (Beckman-Coulter). After conversion of Ca2+-ATP-actin to Mg2+-ATP-actin ...
-
bioRxiv - Neuroscience 2022Quote: ... gradient (6 ml 17 %, 6 ml 25 %, 5 ml 40 % and 5 ml 60 %) contained within an OptiSeal tube (Beckman,). Gradients were spun at 242 000 g at 16 °C and the viral fraction was harvested from the 40 % fraction with a 21-gauge needle ...
-
bioRxiv - Cell Biology 2022Quote: ... 4°C for 1 hour (JA 25.5 rotor, Beckman Coulter). The supernatant was kept and clarified by a 0.45 µM syringe filter (Pall Corporation) ...
-
bioRxiv - Cell Biology 2020Quote: ... The sample was centrifuged at 14,000 g for 10 min at 10°C and then loaded in an Optima analytical centrifuge (Beckman) in an An-50Ti rotor pre-equilibrated at 20°C ...
-
bioRxiv - Microbiology 2022Quote: ... Fractions were diluted in 5 ml PBS and washed by ultracentrifugation at 200,000 × g (60 min, 4°C, AH-650 rotor, 5 ml Beckman Ultra-Clear tubes ...
-
bioRxiv - Genetics 2023Quote: ... Libraries were amplified using 5-7 cycles of PCR using KAPA HiFi DNA polymerase and purified with 1.1X SPRI (Beckman Coulter). Nucleosome profiles were manually inspected using a Tapestation with the D1000 Screen Tape system (Agilent) ...
-
bioRxiv - Systems Biology 2020Quote: ... each resultant fraction underwent separate ultracentrifugation at 100,000xg for 40 minutes at 4°C (rotor TLA 120.2) in 1 ml 11×34 mm polycarbonate uncapped centrifuge tubes (Beckman Coulter 343778). In EV-enriched pooled fraction experiments ...
-
bioRxiv - Molecular Biology 2021Quote: ... pombe cells were pelleted down for 10 min at 5000 rpm at 4°C (Rotor: F10-6X500, FiberLite Beckman J2-MC). The pellet was washed with buffer 1 (HEPES- 20 mM ...
-
bioRxiv - Bioengineering 2022Quote: ... The 60-70 mL were then divided equally into two 50-mL centrifuge tubes and spun down outside the anaerobic chamber at 4 °C and 3500 rpm for 10 min using an Allegra 64R ultracentrifuge (Beckman Coulter). Next ...
-
bioRxiv - Bioengineering 2022Quote: ... Each 250 mL culture was divided equally into six 50-mL centrifuge tubes and spun down at 4 °C and 3500 rpm for 10 min using an Allegra 64R centrifuge (Beckman Coulter). The supernatant was discarded and 6 mL of ice-cold 10% glycerol was used to wash and combine the six cell pellets into one suspension ...
-
bioRxiv - Genetics 2020Quote: ... The homogenates were incubated on ice for 15–20 min and then centrifuged at 3000xg for 10 min at 4°C in a GPR Data Settop centrifuge (Beckman, Inc.). The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042 ...
-
bioRxiv - Molecular Biology 2020Quote: ... the lysate was incubated under rotation for 30 min at 4 °C and cleared for 10 min in an MLA-80 rotor (Beckman Coulter) at 11,500 xg and 4 °C ...
-
bioRxiv - Systems Biology 2020Quote: ... the 500xg supernatant was first spun at 10,000xg for 10 minutes at 4°C (Beckman Coulter, fixed angle rotor TLA 120.2) in 1 ml 11×34 mm polycarbonate uncapped centrifuge tubes (Beckman Coulter 343778) ...
-
bioRxiv - Microbiology 2022Quote: ... respectively) by centrifugation at 4000 × rpm for 10 min at 4 °C using an Allegra® X-15R centrifuge (Beckman Coulter) and flash-frozen in liquid nitrogen before RNA isolation ...
-
bioRxiv - Biochemistry 2023Quote: ... The cells were pelleted by centrifugation at 12,000 xg and 4 °C for 10 min in an Avanti J26-XPI centrifuge (Beckman Coulter Inc.). The cell pellets were homogenized in lysis buffer (25 mM Tris ...
-
bioRxiv - Genomics 2021Quote: ... Libraries were amplified for a total of 8-10 cycles and DNA purified using AMPure XP beads (Beckman Coulter). The quality and concentration of ATAC-seq libraries were evaluated using the Bioanalyzer DNA High Sensitivity Assay (Agilent Technologies ...
-
bioRxiv - Biophysics 2023Quote: ... 1 mM DTT) and spun at 32,600 × g for 15 h at 4° in SW32 rotor (Beckman Coulter). Ribosome fractions were pooled as shown in Figure 2D ...
-
bioRxiv - Biophysics 2023Quote: ... the supernatant was layered onto PBS/1.5 M sucrose solution in sample/sucrose 4:1 ratio and ultracentrifuged at 264,000 × g on Optima TLA 100.3 ultracentrifuge (Beckman for 2 h at 4°C ...
-
bioRxiv - Developmental Biology 2023Quote: ... Peptide supernatant was cleared by ultracentrifugation at 100,000□g for 1 hour at 4□°C (Beckman Coulter, 343775), then vacuum-dried overnight.