Labshake search
Citations for Beckman :
301 - 350 of 2297 citations for 6 methyl 5 6 7 8 tetrahydro 1 3 dioxolo 4 5 g isoquinolin 6 iumchloride since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2019Quote: ... CECs were pre-incubated with human recombinant CCL5 (1-1000 ng/ml, R&D) and/or CD35 blocking antibody (5-20 μg/ml, clone J3D3, Beckman Coulter) for an hour prior to infection.
-
bioRxiv - Biochemistry 2021Quote: ... live cells were stained with Alexa 647-conjugated M1 anti-FLAG antibody (1:1000, 5 minutes) and analyzed on a Cytoflex flow cytometer (Beckman Coulter).
-
bioRxiv - Synthetic Biology 2021Quote: ... 8 °C (Beckman Coulter Optima MAX-XP ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 8 °C (Beckman Coulter Optima MAX-XP ...
-
bioRxiv - Genomics 2020Quote: ... and separated by ultracentrifugation at 4°C for 3 hours (35300 rpm, Beckman, SW41 rotor) through a 5-50% sucrose gradient (40 mM Tris-HCl pH 8.4 ...
-
bioRxiv - Biophysics 2023Quote: ... precipitated by ultracentrifugation (35,000 rpm for 3 h at 4 ° C, Beckman-Coulter L90K, USA), and then redissolved in TNE/5 buffer.
-
bioRxiv - Biochemistry 2021Quote: ... NaCl solution was added to 1 M and the solution was centrifuged for 10 min at 12,000 × g at 1°C and for 20 min at 38,000 x g at 1°C (Beckman Coulter Avanti J-25I, JA 25.50 rotor). CHAPS was added to 0.02% ...
-
bioRxiv - Microbiology 2019Quote: ... Conditioned media was then centrifuged at 36,000 × g for 3 hours at 4ºC (Type 45 Ti rotor, Beckman Coulter). OMV-containing pellets were resuspended in 2 mL ASW.
-
bioRxiv - Plant Biology 2024Quote: ... and centrifuged for 3 h at 260,000 g using an SW 55 Ti swinging-bucket rotor (Beckman Coulter, USA). The final supernatant was discarded ...
-
bioRxiv - Molecular Biology 2021Quote: ... RNA concentration of the cleared lysate was measured by nanodrop and 500 μg of this RNA was loaded onto the gradient and run for 2.5 hr at 220,000 g and 4°C in an SW41-rotor (Beckman). Gradients were then run at 850 μL/min in a density gradient fractionation system (Teledyne Isco) ...
-
bioRxiv - Bioengineering 2021Quote: ... The resulting solution was centrifuged at 164,000 × g (30,000 rpm) for 4 h at 20°C (Optima XPN-80 Ultracentrifuge, Beckman) to remove any remaining nanotube aggregates.
-
bioRxiv - Biochemistry 2020Quote: ... Beckman CoulterTM at 150.000 g for 120 minutes at 4°C with a TLA-55 Rotor (Beckman CoulterTM) to pellet EVs ...
-
bioRxiv - Biochemistry 2021Quote: ... and separated by ultracentrifugation in a TLA120.2 rotor (Beckman Coulter; 1.5 h at 278,000 x g, 4°C).
-
bioRxiv - Biophysics 2020Quote: ... and then sonicated and ultracentrifuged (440,000 g, 35 min, 4°C; MLA80 rotor, Beckman Optima™ MAX-TL). The supernatant was applied to a Ni-NTA column (Machery-Nagel ...
-
bioRxiv - Cell Biology 2020Quote: ... pellets obtained by ultracentrifugation (100,000 x g in Ti45 Beckman Coulter rotor for 70 min. at 4 ° C) were washed and resuspended in 1.25 ml buffer [0.25 M sucrose ...
-
Targeted attenuation of elevated histone marks at SNCA alleviates α-synuclein in Parkinson’s diseasebioRxiv - Neuroscience 2020Quote: ... The samples were then centrifuged at 107,163.6 X g for 2.5 hours at 4°C in an ultracentrifuge (XPN 100, Beckman Coulter). After centrifugation ...
-
bioRxiv - Biochemistry 2019Quote: ... and then was centrifuged at 100,000 × g for 70 min at 4°C (# Optima-XE SW41 Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Cell Biology 2020Quote: ... the cleared supernatant was ultracentrifuged at 47,000 g for 2 hours at 4 °C using the JA25.50 rotor (Beckman). The virus was resuspended overnight in 180 μL D10 medium at 4 °C ...
-
bioRxiv - Microbiology 2019Quote: ... EVs were precipitated at 100,000 × g for 90 min at 4 °C (50.2Ti rotor, Beckman Coulter, Brea, CA) and suspended in PBS ...
-
bioRxiv - Biochemistry 2021Quote: ... and then centrifuging at 30,000 x g for 25 min at 4 °C in a JA 25.50 rotor (Beckman). GsI-IIC RT and other cellular proteins were then precipitated from the supernatant with 60% saturating ammonium sulfate ...
-
bioRxiv - Cell Biology 2021Quote: ... supernatants were spun for 70 minutes at 200,000 × g and 4°C in an XPN-80 ultracentrifuge equipped with a Type 50.4 Ti rotor (Beckman Coulter ...
-
bioRxiv - Microbiology 2022Quote: ... The supernatant fractions were collected and centrifuged at 75,600 x g for 90 min at 4 °C (Beckman JA25.50 rotor ...
-
bioRxiv - Molecular Biology 2022Quote: ... The elutions were combined and centrifuged at 186,000 x g at 4 °C for 1.5 h in a (TLA-120.1) rotor (Beckman Coulter). Supernatant was discarded and the pellet was resuspended in the RNC buffer at a concentration of ~200 nM ...
-
bioRxiv - Biochemistry 2022Quote: ... Membrane contamination was removed by centrifugation 100,000 x g 1.25 hours 4°C in an NVT65.2 rotor (Beckman Coulter). The clarified supernatant was concentrated to 50 µl by ultrafiltration (Sartorius Vivaspin Turbo ...
-
bioRxiv - Neuroscience 2023Quote: EVs suspensions were pelleted by centrifugation at 100,000 x g for 70 min at 4°C using a 70.1Ti rotor (Beckman) and resuspended in 20 volumes (w/v ...
-
bioRxiv - Neuroscience 2023Quote: ... Fractions were diluted with 15 mL of cold PBS and centrifuged at 100,000 x g for 70 min at 4°C using a 70.1Ti rotor (Beckman). The supernatants were discarded and the pellets (containing EVs ...
-
bioRxiv - Microbiology 2023Quote: ... This OMV solution was then pelleted by ultracentrifugation at 100,000 x g for 3h at 4°C (Beckman Coulter Optima L-80 XP Ultracentrifuge ...
-
bioRxiv - Genomics 2023Quote: ... Extracts were then centrifuged at 148,000 g for 2.5 hours at 4°C using the SW 28 Ti rotor (Beckman). Resulting pellet was resuspended overnight at 4°C in 1.5 ml of HBSS ...
-
bioRxiv - Cell Biology 2023Quote: ... The fraction containing TpPyShell was further concentrated by centrifugation (4000 g, 15 min, 4°C, SX4400 rotor; Beckman) with Amicon Ultra (M.W.4000 ...
-
bioRxiv - Cell Biology 2023Quote: ... pH 11.5) and were centrifuged for 60 min at 4 °C (150,000 g, Rotor TLA-100, Beckman Coulter). The yielded pellet was analyzed by immunoblotting and mass spectrometry (Supplementary Figure 1).
-
bioRxiv - Cell Biology 2023Quote: ... pH 11.5) and is centrifuged for 60 min at 4 °C (150,000 g, Rotor TLA-100, Beckman Coulter). The resulting supernatant contains the released matrix proteins and peripheral membrane proteins ...
-
bioRxiv - Cell Biology 2023Quote: ... pH 11.5) and was centrifuged for 60 min at 4 °C (150,000 g, Rotor TLA-100, Beckman Coulter). The resulting supernatant contains matrix proteins and peripheral membrane proteins ...
-
bioRxiv - Microbiology 2024Quote: ... The eluent was ultracentrifuged (100,000 ×g, 4°C, 16 h) using Optima L-100 XP Ultracentrifuge (Beckman Coulter) to sediment ribosomes.
-
bioRxiv - Neuroscience 2024Quote: ... the samples were ultracentrifuged (4 °C for 60 min) at 100,000×g (Optima MAX Preparative Ultracentrifuge, Beckman Coulter). Supernatants ...
-
bioRxiv - Microbiology 2024Quote: ... it was concentrated by ultracentrifugation through OptiPrepTM Density Gradient Medium (D1556) at 154,000 g at 4℃ for 2.5 hours using a SW41Ti rotor (Beckman). The pelleted viral particles were suspended in 100 μL of PBS ...
-
bioRxiv - Molecular Biology 2023Quote: ... After ultracentrifugation (Beckman Ti70 rotor, 150,000 x g for 1 h), the collected membrane fraction was homogenized with a glass Dounce homogenizer in 20ml buffer [HN buffer + 1% (w/v ...
-
bioRxiv - Molecular Biology 2019Quote: ... 500 mM sucrose) in a 5 × 44 mm micro centrifuge tube (Beckman Coulter) and sedimented by centrifugation (12000 rpm ...
-
bioRxiv - Biochemistry 2020Quote: ... Crosslinking reactions were loaded on 600µl 5∼35% glycerol gradients (Beckman 344090 tubes) in BC300N buffer and centrifuged for 4hr at 55,000rpm at 4°C in a TLS-55 rotor (with Beckman 356860 adaptors) ...
-
bioRxiv - Bioengineering 2019Quote: ... 5′ cDNAs were purified using the Agencourt AMPure XP Kit (Beckman Coulter Genomics) and analysed by capillary electrophoresis before sequencing the single-end libraries using the Illumina NextSeq 500 system and a MID 150 Kit with 75 bp read length.
-
bioRxiv - Cell Biology 2023Quote: ... and then spun for 5 minutes in a chilled airfuge (Beckman Coulter, 340401) at around 80,000 rpm ...
-
bioRxiv - Molecular Biology 2024Quote: ... Discontinuous sucrose gradient was prepared in 5 ml ultracentrifuge tubes (Beckman Coulter, C14279) with 2 ml of 1.2 M sucrose solution (1.2 M sucrose ...
-
bioRxiv - Biophysics 2020Quote: ... After centrifugation at 30,000 rpm (4 ° C for 3 h) in the SW45Ti rotor (Beckman Instruments), eight 1.5-ml fractions were collected from the top of a gradient ...
-
bioRxiv - Biochemistry 2020Quote: ... Gradients were resolved at 36,000 rpm for 3 hours at 4 °C in SW41 rotor (Beckman). Both separation and fractionation of gradients used a Biocomp Gradient Station (BioComp Instruments ...
-
bioRxiv - Biochemistry 2020Quote: ... subjected to centrifugation (36,000 rpm for 3 hours at 4 °C, SW-41Ti Beckman Coulter rotor) and analysed using Biocomp Gradient Station (BioComp Instruments ...
-
bioRxiv - Immunology 2022Quote: ... The gradients were spun at 150,200 x g for 3 h in a SW41 Ti swinging-bucket rotor (Beckman Coulter). 13 fractions of 0.95 ml were collected from the top and subjected to TCA precipitation ...
-
bioRxiv - Microbiology 2022Quote: ... The sample-containing tube was spun at 347,000 × g and 20°C for 3 hours using Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Bioengineering 2024Quote: ... The sample tubes were then centrifuged at 347,000 × g and 20°C for 3 hours using a Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Biochemistry 2021Quote: ... after which the lysate was clarified by centrifugation at 30,000 x g for 60 min at 4 °C in a JA 25.50 rotor in an Avanti J-E centrifuge (Beckman). Nucleic acids in the clarified lysate were precipitated by slowly adding polyethyleneimine with constant stirring in an ice bath to a final concentration of 0.4% ...
-
bioRxiv - Cell Biology 2020Quote: ... 0.5 mM DTT, 100 μg/ml cycloheximide) and centrifuged (160,000 g, 120 min, 4°C) in an SW41Ti rotor (Beckman). After centrifugation the sediment in the tube went through a UV detector at the wavelength of 254nm and simultaneously the required fractions (>=5 ribosomes ...
-
bioRxiv - Cell Biology 2020Quote: ... Lysates were loaded on the top of the gradient and centrifuged at 260,000 × g and 4 °C for 2 h using SW 41 rotor (Beckman). Collection of polysomal fractions were done using Piston Gradient Fractionator (BioComp) ...