Labshake search
Citations for Beckman :
51 - 100 of 252 citations for 6 FLUOROCHROMONE 3 CARBONITRILE 97 since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2019Quote: ... and centrifuged for 6 hours at 55,000 rpm at 4°C on a TLS-55 rotor (Beckman Coulter) in a TL-100 ultracentrifuge (Beckman Coulter) ...
-
bioRxiv - Cell Biology 2023Quote: ... 10% and 6% and ultracentrifuged at 187,000xg for 1:30h at 4°C in Sw32.1Ti rotor (Beckman Coulter). Afterwards ...
-
bioRxiv - Cell Biology 2021Quote: ... equipped with 3 lasers (405 nm, 488 nm, 633 nm, Beckman Coulter, Milan, Italy) and data were analysed with Kaluza Analysis Software v ...
-
bioRxiv - Neuroscience 2022Quote: ... Each stained sample was analyzed on a 3-laser Navios flow cytometer (Beckman-Coulter), based on a protocol standardized with Megamix-Plus FSC beads (BioCytex ...
-
bioRxiv - Developmental Biology 2023Quote: ... and ultracentrifuged at 50,000 x g for 3 hours in a SW41Ti rotor (Beckman). 12 fractions of 1 ml each were manually separated ...
-
bioRxiv - Cell Biology 2019Quote: ... A 0.6-1.9 M continuous sucrose gradient was prepared in 10 mM HEPES pH 7.2 in ultracentrifuge tubes (Beckman Coulter) that were coated with Sigmacote (Sigma #SL2) ...
-
bioRxiv - Immunology 2021Quote: Cells were analyzed using 4-to 6-color direct immunofluorescence staining on a Cytoflex LX or S (Beckman Coulter) flow cytometer ...
-
bioRxiv - Cancer Biology 2021Quote: ... Libraries were further amplified 4–6 PCR cycles as described [43] and purified using AMPure XP beads (Beckman Coulter). ATAC-seq libraries were subsequently sequenced 2 x 75 bp on an Illumina NextSeq500.
-
bioRxiv - Microbiology 2020Quote: ... filtered through 45 μm-pore size filters and concentrated onto a 20% sucrose cushion by ultracentrifugation (24,000 rpm, 2h, 6°C) using a SW32 rotor (Beckman). HIV-1-based lentiviral particles were produced by co-transfecting 293T cells with packaging (psPAX2) ...
-
bioRxiv - Genomics 2020Quote: ... eluted in 6 μl TE and size-selected using a 0.9X volume of Ampure XP Beads (Beckman Coulter A63882) to remove excess oligos.
-
bioRxiv - Immunology 2021Quote: ... Soluble CuMV-CP-containing protein solution was separated from the cellular proteins by ultracentrifugation in a sucrose gradient (20%-60% sucrose; ultracentrifugation at 25,000 rpm for 6 hours at 5°C [SW28 rotor, Beckman]). After dialysis CuMVTT-containing gradient fractions ...
-
bioRxiv - Cell Biology 2019Quote: ... A 0.6-1.9 M continuous sucrose gradient was prepared in 10 mM HEPES pH 7.2 in ultracentrifuge tubes (Beckman Coulter) that were coated with Sigmacote (Sigma #SL2) ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was spun at 45,000 rpm (~200,000 x g) for 6 hours at 4 °C in a SW60Ti rotor (Beckman Coulter). Successive 0.4 mL fractions were collected by pipetting and their densities measured ...
-
bioRxiv - Microbiology 2019Quote: ... The bacterial cells were recovered by centrifugation (in a JLA 81000 rotor, Beckman-Coulter, at 6 Krpm for 15 min) and disrupted by sonication (VibraCell 75042 sonicator ...
-
bioRxiv - Microbiology 2020Quote: ... for 5 minutes using a FIBERLite F10BCI-6×500y rotor (Piramoon Technologies) in an Avanti JXN-30 centrifuge (Beckman Coulter). The clarified cell lysate was further centrifuged in a JS-24.38 rotor (Beckman Coulter ...
-
bioRxiv - Biophysics 2022Quote: SpeMreBs with a volume of 200 μL were polymerised for 1 to 6 h and centrifuged (100,000 rpm, 23°C, 120 min) in a TLA-100 rotor (Beckman Coulter). The pellet was resuspended in 200 μL of water ...
-
bioRxiv - Biochemistry 2022Quote: ... The lysed cells were centrifuged at 41399 g and 6 °C and for 1 hour (Beckman Avanti J-25 centrifuge) to obtain the cytoplasmic protein extract.
-
bioRxiv - Developmental Biology 2022Quote: ... Supernatant was then filtered using 0.22 µm filter unit and divided into 6 Ultra-Clear tubs (Beckman Coulter – Ref.344058). Tubes were ultra-centrifuged at 31000 G for 1h30 at 4°C ...
-
bioRxiv - Cell Biology 2022Quote: ... were mixed 1:1 with liposomes (6 mg/ml) and floated for 2h at 55 000 rpm in a TLS-55 rotor (Beckman) at 25°C through a sucrose gradient ...
-
bioRxiv - Microbiology 2022Quote: ... for 90 min or for the 6-well format at 44,000 rpm using a Beckman TLA-55 fixed angle-rotor (Beckman Coulter) for 45 min at 4°C ...
-
bioRxiv - Cancer Biology 2023Quote: ... cells were seeded into 6-well plates at a concentration of 4×105 cells per well and counted cumulatively with a Coulter counter (Beckman) every three days for two weeks ...
-
bioRxiv - Biophysics 2023Quote: SpeMreBs in buffer S polymerized at room temperature with a volume of 200 μL were polymerized for 1–6 h and centrifuged (100,000 rpm at 23 °C for 120 min) in a TLA-100 rotor (Beckman Coulter) (2) ...
-
bioRxiv - Cell Biology 2023Quote: ... down to 6 ml and ultracentrifuged at 10,000xg for 16 min at 4°C in MLA-80 rotor (Beckman Coulter). The pellet was resuspended and washed with PBS at the same conditions (volume ...
-
bioRxiv - Biochemistry 2024Quote: ... The indicated cell lines were seeded into 6 well plates and then trypsinized and cell number counted using a Z Coulter Counter (Beckman). Approximately 200 cells were seeded into 60 mm dishes and exposed 25 ...
-
bioRxiv - Plant Biology 2024Quote: ... The mixture was then centrifuged for 20 min at 9,700 g at 6°C using an Avanti J-E centrifuge and a JLA-16.250 rotor (Beckman Coulter, USA). The supernatant was separated and centrifuged for 2.5 h at 200,000 g at 6°C using an Optima XPN-90 ultracentrifuge and a Type 45 Ti rotor (Beckman Coulter ...
-
bioRxiv - Plant Biology 2024Quote: ... The suspension was then centrifuged for 20 min at 9,700 g at 6°C using an Avanti J-E centrifuge and a JLA-16.250 rotor (Beckman Coulter, USA). The supernatant was separated and centrifuged for 3 h at 200,000 g at 6°C using an Optima XPN-90 ultracentrifuge with a Type 45 Ti rotor (Beckman Coulter ...
-
bioRxiv - Cell Biology 2024Quote: ... EVs were then placed in the bottom 36% layer of a 6-step gradient in a 13.2 ml open top polyallomer tube (331372, Beckman Coulter). A reference gradient was prepared in parallel and OptiPrep absorbance was measured at 340 nm to estimate the fraction density ...
-
bioRxiv - Biochemistry 2024Quote: ... The cells were sonicated for 6-8 cycles of 20 secs and centrifuged at 40.000 rpm in MLA 80 rotor (Beckman coulter) for 45 min ...
-
bioRxiv - Cell Biology 2021Quote: ... About 9 ml interface that came from 3×SW28 tubes (25×89 mm, Beckman Coulter) was loaded in a SW41 tube (14×89 mm ...
-
bioRxiv - Genomics 2020Quote: ... and separated by ultracentrifugation at 4°C for 3 hours (35300 rpm, Beckman, SW41 rotor) through a 5-50% sucrose gradient (40 mM Tris-HCl pH 8.4 ...
-
bioRxiv - Microbiology 2020Quote: ... The gradient was centrifuged at 150,000 × g for 3 hr (Beckman SW 55 Ti rotor) and subsequently ten fractions ...
-
bioRxiv - Molecular Biology 2022Quote: ... Liberated adipocytes were measured using a 400 micrometer aperture on a Multisizer 3 (Beckman Coulter).
-
bioRxiv - Neuroscience 2022Quote: ... Libraries were barcoded and pooled then underwent three 3 rounds of AMPure bead (Beckman-Coulter) cleanup at a 0.8:1 ratio of beads to library ...
-
bioRxiv - Bioengineering 2022Quote: ... or by electrozone sensing (EZS) using the Multisizer 3 (Coulter Counter, Beckman Coulter, Brea, CA). Samples of 0.5–150 µL were used for the AccuSizer and Multisizer ...
-
Phenotypic and genotypic adaptation of E. coli to thermal stress is contingent on genetic backgroundbioRxiv - Evolutionary Biology 2023Quote: ... and measuring cell density in volumetric mode on a Multisizer 3 Coulter Counter (Beckman Coulter). An isolate survived if its cell density measurements were maintained over the course of the test while allowing for fluctuations of +/− 1×106 cells.
-
bioRxiv - Biophysics 2023Quote: ... precipitated by ultracentrifugation (35,000 rpm for 3 h at 4 ° C, Beckman-Coulter L90K, USA), and then redissolved in TNE/5 buffer.
-
bioRxiv - Microbiology 2020Quote: ... were added into cells (1×106 cells/sample in 100 μL) and incubated for 60 min at 2-6°C and analyzed using flow cytometry (CytoFLEX, Beckman Coulter).
-
bioRxiv - Cell Biology 2020Quote: Interstitial macrophages (CD45+CD64+Siglec-F−CD11bhigh) or alveolar macrophages (CD45+CD64+Siglec-F+CD11blow) were isolated from C57BL/6 by MOFLO system (Beckman Coulter). Isolated macrophages were cultured for 24 hrs in RPMI-1640 medium containing 10% FBS and 50μM 2-mercaptoethanol with or without GM-CSF (10 ng/ml).
-
bioRxiv - Cancer Biology 2020Quote: ... cells were grown for 4-6 days and counted using an Incucyte (Essen Biosciences) or a Z2 Coulter Counter (Beckman Coulter). Small molecule dose-response curves were printed using an D300e Digital Dispenser (HP Specialty Printing Systems ...
-
bioRxiv - Cell Biology 2022Quote: ... Resulting libraries were then pooled in sets of 6 (approximately 36,000 beads per pool) and products purified by Agencourt AMPure XP beads (Beckman Coulter, A63881) with a 0.6x volume wash followed by a 0.8x volume wash ...
-
bioRxiv - Microbiology 2022Quote: ... The recovered supernatant of both induced and uninduced cultures was transferred in 6 polyallomer (36 ml each) centrifuge tubes (25×89 mm, Beckman Coulter) to which 1 ml of Protease Inhibitor Cocktail (Sigma Aldrich ...
-
bioRxiv - Immunology 2023Quote: ... Resulting libraries were then pooled in sets of 6 (approximately 36,000 beads per pool) and products purified by Agencourt AMPure XP beads (Beckman Coulter, A63881) with a 0.6x volume wash followed by a 0.8x volume wash ...
-
bioRxiv - Plant Biology 2023Quote: ... the vesicle containing fraction was dispersed in 350 µl fractions in 1.5 mL (9.5 x 38 mm) in 6 polypropylene microfuge tubes (Beckman Coulter, Cat. # 357448) and the volume in each tube was brought up to 1,500 µl using 20 mM Tris-HCl pH 6.0 ...
-
bioRxiv - Cancer Biology 2024Quote: ... Cells were trypsinized 3 or 6 days later to make single cell suspensions and were counted using a Vi-Cell XR Cell Counter (Beckman Coulter). Cell counts were then normalized to the number of cells plated at day 0.
-
bioRxiv - Immunology 2023Quote: ... Genomic DNA isolated from sorted cells were pre-amplified to the target value of 6 to 24 billion number of copies and subsequently purified using Agencourt AMPure XP beads (Beckman Coulter). The purified DNA were compartmented into oil droplets together with ddPCR Supermix (Bio-rad ...
-
bioRxiv - Neuroscience 2023Quote: ... After PCR the samples were combined into small pool of 2-6 samples and size selection was carried out by adding 0.55x volume of AMPure XP beads (Beckman Coulter, #A68831). The concentrations of purified library pools were quantified with Collibri™ Library Quantification Kit (ThermoFisher ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was separated and centrifuged for 2.5 h at 200,000 g at 6°C using an Optima XPN-90 ultracentrifuge and a Type 45 Ti rotor (Beckman Coulter, USA). The supernatant was discarded ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was separated and centrifuged for 3 h at 200,000 g at 6°C using an Optima XPN-90 ultracentrifuge with a Type 45 Ti rotor (Beckman Coulter, USA). The supernatant was discarded ...
-
bioRxiv - Microbiology 2020Quote: ... 3′ ligated RNA was cleaned by incubating with 2.5X volume of RNAClean XP beads (Beckman Coulter) and 1.5X volume of isopropanol for 15 min ...
-
bioRxiv - Neuroscience 2019Quote: ... and 3% Percoll (1 ml each) in Polycarbonate centrifuge tubes (13 x 51 mm; Beckman Coulter). The gradients were then centrifuged for 15 min at 18,700 rcf ...