Labshake search
Citations for Beckman :
451 - 500 of 1911 citations for 4 Methoxy 2 2 3 4 5 5 Hexacb Unlabeled 50 Ug Ml In Nonane since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2021Quote: ... After centrifugation (38,000 rpm, 210 min, 4°C) in an SW41 rotor (Beckman Coulter), RNA content was measured at A254 while fractions were collected using a Foxy Jr ...
-
bioRxiv - Biochemistry 2020Quote: ... and spun at 90,000 rpm for 10 min at 4°C (TLA120.1 Beckman Coulter). After incubation at 37°C for 2 mins ...
-
bioRxiv - Cell Biology 2022Quote: ... and centrifuged at 4°C for 30min at 5,000xg and subsequently at 10,000xg (Beckman Coulter Optima XPN-80 with a SW60 rotor) ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was centrifuged at 100,000 × g for 18 h at 4°C (Beckman-Coulter XPN-80 Ultracentrifuge ...
-
bioRxiv - Biophysics 2023Quote: ... and at 4 °C for 1 hour for ultracentrifugation (70,658 g, Beckman, Type 70Ti) in vacuum ...
-
bioRxiv - Plant Biology 2023Quote: ... at 10,000 x g for 1 h at 4 ⁰C (JA-17 rotor, Beckman Coulter ...
-
bioRxiv - Biochemistry 2023Quote: ... and cleared by centrifugation at 4°C (18500 rpm, JA-25.50 Beckman, 20 min,). The clarified extract was purified on a 4 ml His60 Ni-IDA Superflow resin (Ozyme ...
-
bioRxiv - Biochemistry 2023Quote: ... for 1 hour at 4°C in a Type 45 Ti rotor (Beckman Coulter). The clarified lysate was then incubated with 5 mL of Ni-NTA agarose beads (Qiagen) ...
-
bioRxiv - Developmental Biology 2023Quote: ... cleared by ultracentrifugation at 100,000Lg for 1 hour at 4□°C (Beckman Coulter, 343775), then and vacuum-dried overnight.
-
bioRxiv - Neuroscience 2024Quote: ... for 20 min at 4°C using the pre-cooled 70.1 rotor (Beckman, 342184). Pellets were kept on ice ...
-
bioRxiv - Cell Biology 2024Quote: ... and 10,000 g (30 min, 4 °C, SW28 rotor; Optima XPN Ultracentrifuge, Beckman Coulter) to pellet large EVs52 ...
-
bioRxiv - Microbiology 2024Quote: ... 4°C for 1 h in a SW 41 Ti rotor (Beckman Coulter, Inc). The pellet was resuspended in 1 ml of PBS pH 7.4 ...
-
bioRxiv - Cancer Biology 2024Quote: ... 10,000 × g for 30 min) at 4°C (Beckman Coulter Avanti J-E Centrifuge); filtered through a 0.22 μm PES filter (Genesee) ...
-
bioRxiv - Biochemistry 2020Quote: ... Fragments were purified using 2 volumes AMPure XP beads (Beckman Coulter) and amplified for 8-10 cycles using NEBNext Multiplex Oligos ...
-
bioRxiv - Biochemistry 2021Quote: ... 6 mM 2-mercaptoethanol and centrifuged with a 70Ti (Beckman coulter) rotor at 40,000 rpm for 18 hours at 4°C ...
-
bioRxiv - Genomics 2022Quote: ... and purified with 2 rounds of AMPure XP beads (Beckman Coulter). Libraries were sequenced on an Illumina NextSeq 550 ...
-
bioRxiv - Biochemistry 2020Quote: ... Fragments were purified using 2 volumes AMPure XP beads (Beckman Coulter) and amplified for 8-10 cycles using NEBNext Multiplex Oligos ...
-
bioRxiv - Immunology 2021Quote: The ACCESS SARS-CoV-2 CLIA (Beckman Coulter Inc., California, USA) was used for semiquantitative detection of IgG directed against S protein RBD using serum obtained from venipuncture blood ...
-
bioRxiv - Genomics 2023Quote: ... prepare sucrose gradient in 2 ultracentrifuge buckets (Beckman Coulter cat: 344058) by layering 5 mL of Interphase buffer atop 10 mL of SCB in each ...
-
bioRxiv - Molecular Biology 2019Quote: ... 500 mM sucrose) in a 5 × 44 mm micro centrifuge tube (Beckman Coulter) and sedimented by centrifugation (12000 rpm ...
-
bioRxiv - Biochemistry 2020Quote: ... Crosslinking reactions were loaded on 600µl 5∼35% glycerol gradients (Beckman 344090 tubes) in BC300N buffer and centrifuged for 4hr at 55,000rpm at 4°C in a TLS-55 rotor (with Beckman 356860 adaptors) ...
-
bioRxiv - Microbiology 2020Quote: ... Cells were pelleted at 200 x g 5 min in Allegra centrifuge (Beckman) and then resuspended in complete RPMI ...
-
bioRxiv - Bioengineering 2019Quote: ... 5′ cDNAs were purified using the Agencourt AMPure XP Kit (Beckman Coulter Genomics) and analysed by capillary electrophoresis before sequencing the single-end libraries using the Illumina NextSeq 500 system and a MID 150 Kit with 75 bp read length.
-
bioRxiv - Cell Biology 2023Quote: ... and then spun for 5 minutes in a chilled airfuge (Beckman Coulter, 340401) at around 80,000 rpm ...
-
bioRxiv - Microbiology 2024Quote: ... gradient (25 – 39 % OptiPrep, 309600 x g, 5 h, SW60Ti rotor (Beckman Coulter). Purification of VLPs was realized accordingly ...
-
bioRxiv - Biochemistry 2023Quote: ... cells were treated with the drugs (20 µM to a suspension at 500,000 cells/mL in PBS containing 2 % FBS at 37°C) and directly analyzed by flow cytometry (Gallios, Beckman-Coulter, 405/488 nm laser) over 2 h ...
-
bioRxiv - Cell Biology 2020Quote: ... an ultracentrifuge capable of spinning 50 ml falcon tubes at 10,000 rpm (Beckman Coulter Avanti J-30 I ultracentrifuge and a Beckman JA-12 fixed angle rotor) ...
-
bioRxiv - Cell Biology 2022Quote: ... two plastic slides were placed in a 50 ml tube (no.357007; Beckman) resistant to high-speed centrifugation in complete medium supplemented with Cytochalasin D (no.C8273 ...
-
bioRxiv - Cell Biology 2023Quote: ... The gradients were centrifuged at 150,000 × g in MLS-50 rotors (Beckman Instruments) for 3 h ...
-
bioRxiv - Cell Biology 2020Quote: ... and ultracentrifuged with a 70 Ti rotor (Beckman Coulter; 50,000 rpm, 75 min, 4°C). Supernatants after ultracentrifugation were mixed with COSMOGEL GST-Accept beads (Nacalai Tesque ...
-
bioRxiv - Molecular Biology 2021Quote: ... at 40000 rpm for 30 min at 4°C with a Ti45 rotor (Beckman, USA). Mpro-containing supernatant was applied to an immobilized metal affinity chromatography (IMAC ...
-
bioRxiv - Neuroscience 2021Quote: ... S1 was centrifuged at 30,000 rpm for 30 min at 4°C (Beckman S4180 rotor). The obtained pellet (P2 ...
-
bioRxiv - Molecular Biology 2020Quote: ... and 4 mM magnesium acetate) were prepared in 25 × 89 mm polyallomer tubes (Beckman Coulter) using a Gradient Master (BioComp) ...
-
bioRxiv - Biochemistry 2020Quote: ... the filtered cell culture fluid was ultracentrifuged (25k rpm, 4 °C, SW55Ti Rotor, Beckman Coulter) through a 20% sucrose cushion prepared in TNE buffer (10 mM Tris-HCl ...
-
bioRxiv - Biochemistry 2021Quote: ... and concentrated by ultracentrifugation (100,000 × g, 90 min 4 °C, SW41, Beckman Coulter, Brea, CA). The pellet was resuspended in reducing Laemmli SDS-PAGE sample buffer ...
-
bioRxiv - Biophysics 2021Quote: ... Cell debris was removed by centrifugation (Beckman Avanti, 45 min, 40,000 x g, 4 °C) and supernatants were diluted 3-fold in 20 mM Tris pH 8.0 ...
-
bioRxiv - Neuroscience 2020Quote: Particle size distribution was determined using a Coulter Multisizer 4 (Beckman Coulter, Inc., Miami, FL). Particles were resuspended in double distilled water and added dropwise to 100 ml of ISOTON II solution until the coincidence of the particles was between 8% and 10% ...
-
bioRxiv - Cell Biology 2020Quote: ... and ultracentrifuged with a 70 Ti rotor (Beckman Coulter; 50,000 rpm, 75 min, 4°C). The supernatants were mixed with COSMOGEL GST-Accept beads (Nacalai Tesque ...
-
bioRxiv - Biochemistry 2021Quote: ... The bacterial culture was centrifuged at 4,000 × g for 15 min at 4°C (Beckman) and the cell pellet was resuspended in 30-40 mL of lysis buffer (50 mM HEPES pH 8.0 ...
-
bioRxiv - Cell Biology 2019Quote: ... and ultracentrifuged with a 70 Ti rotor (Beckman Coulter; 50,000 rpm, 75 min, 4°C). The supernatants obtained (around 40 ml each ...
-
bioRxiv - Physiology 2019Quote: ... and spun at 100,000xg for 20m at 4°C in Optima Max ultracentrifuge (Beckman Coulter). Tubes were carefully removed from the ultracentrifuge with forceps and 30 uL of supernatant was removed to a PCR tube with every care taken to avoid the protein pellet ...
-
bioRxiv - Cancer Biology 2019Quote: ... held at 4 °C) and then cleaned up with the SPRIselect Reagent Kit (Beckman Coulter). A qualitative analysis on the amplified cDNA was performed using Agilent Bioanalyzer high sensitivity chip.
-
bioRxiv - Neuroscience 2021Quote: ... at 25000 rpm (SW28, 4°C) in an 80K ultracentrifuge (Beckman Coulter; Brea, California, USA). After centrifugation ...
-
bioRxiv - Immunology 2020Quote: ... at 5,000 g for 30 minutes at 4°C and subsequently at 10,000 g (Beckman Coulter Optima L-90K with a SW40Ti rotor) ...
-
bioRxiv - Biophysics 2021Quote: ... 2mM MgCl) centrifuged for 16 hours at 35k rpm at 4 °C (Beckman TLS-55). 80S ribosome was found to have formed a pellet at the bottom of the tube and was resuspended in 20mM HEPES pH 7.9 ...
-
bioRxiv - Neuroscience 2020Quote: ... The gradients were ultracentrifuged for 2.5 hours (4°C) in a SW41Ti rotor (Beckman Coulter) at 35000 rpm ...
-
bioRxiv - Immunology 2021Quote: ... at 23,000 rpm for 2,5h at 4°C in sterile Ultra-clear centrifuge tubes (Beckman) using an SW28 swinging bucket rotor (Beckman) ...
-
bioRxiv - Immunology 2021Quote: ... After overnight centrifugation (at 4 °C) at 100,000×g (Beckman Coulter Optima L-90 ultracentrifuge) collected 2 mL fractions were analysed by SDS-PAGE ...
-
bioRxiv - Genomics 2021Quote: ... (4) The final PCR product was purified by 1.8x AMPure XP beads (Beckman Coulter Genomics) followed by a second gel size-selection for the range of 300 to 575 bp for C ...
-
bioRxiv - Plant Biology 2022Quote: ... 0.1 mM AEBSF) and centrifuged (270000 g, 90 min, 4°C, TLA 100.3, Beckman Coulter). The pellet was solubilized in sample buffer and subsequently applied to SDS-PAGE and Western blot analyses.