Labshake search
Citations for Beckman :
401 - 450 of 1330 citations for Monoisodecyl Phthalate 100 Ug Ml In Mtbe Unlabeled Mono 3 7 Dimethyl 1 Octyl Phthalate since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Synthetic Biology 2023Quote: ... The gradients were ultra-centrifuged at 41,000 rpm for 3 hours at 4°C (Optima L-80 XP ultracentrifuge (Beckman-Coulter)) ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 300,000×g at 4°C for 3 h in a TLA-110 fixed angle rotor (k-factor 13) (Beckman Coulter). The pellet was resuspended in 10 µL PBS of which 3 µL was adsorbed onto glow-discharged 2 nm carbon layer coated Quantifoil R1.2/1.3 400 mesh gold grids ...
-
bioRxiv - Molecular Biology 2023Quote: 8 mL of viral supernatant on a 3 mL of 20% sucrose cushion were ultracentrifugated for 3 h at 100,000 x g at 4°C using an Optima L80-XP instrument (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Microbiology 2023Quote: ... Each tube was centrifuged for 3 hours at 150’000 x g (4°C) using an Optima XPN-80 ultracentrifuge (Beckman Coulter) equipped with a SW 32 Ti swinging bucket (369650 ...
-
bioRxiv - Cell Biology 2023Quote: ... The obtained supernatant was layered onto 30 w/v% sucrose solution in ultracentrifugation tubes and subjected to ultracentrifugation at 100,000 × g for 3 h at 4°C using SW32Ti rotor (Beckman courter). The collected sucrose solutions were mixed with PBS and washed by ultracentrifugation at 100,000 × g for 1 h ...
-
bioRxiv - Biochemistry 2023Quote: ... The sucrose density gradient was centrifuged at 50,000 rpm for 3 hours at 4°C in a TLS-55 swinging bucket rotor (Beckman Coulter) with minimum acceleration up to 5,000 RPM and deceleration with no break ...
-
bioRxiv - Bioengineering 2023Quote: ... For performing cryogenic transmission electron microscopic imaging EVs were centrifuged and washed in PBS at 100,000 x g for 3 hours at 4°C in a SW41 Ti rotor (Beckman Coulter).
-
bioRxiv - Cell Biology 2023Quote: ... The concentrated CFS was then ultracentrifuged at 100,000 ˗ g and 4 °C for 3 h (Optima L-80 XP Ultracentrifuge with Type 70.1 Ti Fixed-Angle Titanium Rotor (Beckman Coulter)) ...
-
bioRxiv - Microbiology 2024Quote: ... The flow cytometry analysis of the bacterial cells present in the suspension was performed using a Cytoflex flow cytometer (CytoFLEX 3; Beckman) as previously described (Supplementary Fig ...
-
bioRxiv - Cancer Biology 2024Quote: ... The fragments were repaired the 3’and 5’overhangs using End repair mix (component of SureselectXT) and purified using Agencourt AMPure XP Beads (Beckman). The purified fragments were added with ‘A’ tail using A tailing Mix (component of SureSelectXT ...
-
bioRxiv - Bioengineering 2024Quote: ... The sample tubes were then centrifuged at 347,000 × g and 20°C for 3 hours using a Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Neuroscience 2023Quote: ... The resulting lysate was loaded on top of 10 ml 29% iso-osmolar OptiPrep solution in a conical 30 ml centrifuge tube (Beckman Coulter, SW28 rotor). Samples were centrifuged at 10,100 × g (7,500 r.p.m. ...
-
bioRxiv - Cell Biology 2020Quote: ... Samples were centrifuged in an SW.41 rotor (OptimaTM L-100 XP, Beckman Coulter, Brea, CA) at 39,000 rpm for 16 h at 4°C ...
-
bioRxiv - Biochemistry 2019Quote: ... Complexes of kinesins and microtubules were pelleted using an Optima L-100 XP ultracentrifuge (Beckman Coulter) and a Ti-42.2 fixed-angle rotor at 100,000xg for 10 min ...
-
bioRxiv - Cell Biology 2021Quote: ... Individual Venus-positive cells were isolated on a Moflo XDP 100 cell sorter (Beckman Coulter, Inc.) following 5 min of stimulation with 10 ng/mL PDGF-AA or PDGF-BB (R&D Systems ...
-
bioRxiv - Microbiology 2022Quote: ... 100 μl of the eluate was transferred into a Beckman 11-mm ultracentrifuge tube (Beckman Coulter) for ultracentrifugation in an Optima TLX ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Bioengineering 2021Quote: Medium was filtered through a 0.45 μm pore filter and ultracentrifuged (Beckman Coulter Optima KPN-100) at 110,000 g for 75 min at 4°C ...
-
bioRxiv - Biochemistry 2021Quote: ... the supernatants were transferred to a new tube and spun in a TL-100 ultracentrifuge (Beckman) at 100,000 × g for 1 hour ...
-
bioRxiv - Cell Biology 2022Quote: ... Samples were subsequently centrifuged at 10,000 x g (TL-100, Beckman Coulter or accuSpin Micro 17R) for 20 minutes at 25C ...
-
bioRxiv - Biophysics 2022Quote: ... 100µL samples were then centrifuged at 42000rpm for 30min at 4°C (Beckman TLA 100 rotor). 2 fractions were isolated from these samples ...
-
bioRxiv - Plant Biology 2023Quote: ... The cDNA (100∼200 bp) samples were purified with AMPure XP system (Beckman Coulter, United States). PCR Enriched cDNAs were used to create the final cDNA library and library quality was assessed with the Agilent Bioanalyzer 2100 system (Agilent Technologies) ...
-
bioRxiv - Immunology 2023Quote: ... and spun for 100 min at 38,000rpm at 4°C in a SW41Ti rotor (Beckman Ultracentrifuge). Gradients were syringe-fractionated mechanically from the bottom up and monitored for absorbance at 254nm (Teledyne Isco ...
-
bioRxiv - Microbiology 2023Quote: ... 100 ng of DNA from each sample was buffer exchanged via Ampure XP bead purification (Beckman Coulter Life Sciences product number A63881 ...
-
bioRxiv - Microbiology 2021Quote: ... PE) and HIV-1 Gag core antigen (FH190-1-1, Beckman Coulter; PE, FITC). All samples were acquired on either an BD Fortessa X20 or LSR II using BD FACSDiva software and analyzed using FlowJo v10 (Tree Star) ...
-
bioRxiv - Molecular Biology 2019Quote: ... The concentrated urine sample was resuspended in 3.2 ml of a 50% iodixanol solution and layered on the bottom of a 17 ml Thinwall Polypropylene Tube (Beckman Coulter, Fullerton, California, USA). A discontinuous DG was prepared by additional layering of 4 ml of 20% ...
-
bioRxiv - Plant Biology 2023Quote: ... Supernatant was then filtered through a 0.45 μm sterile syringe filter and 10,4 ml of supernatant were put into an ultracentrifuge tube (Beckman Ultra clear 14 mL tubes (#344085)) ...
-
bioRxiv - Cell Biology 2022Quote: ... in a 50 mL ultracentrifuge tube (Beckman Coulter cat #344058). MN were pelleted by ultracentrifugation in an Optima XPN-80 ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Genetics 2019Quote: ... A 4.9 mL Optiseal tube (formerly polyallomer, 362185, Beckman-Coulter) was then loaded with 1.5 mL of 9% iodixanol/HBS solution ...
-
bioRxiv - Cell Biology 2022Quote: ... Supernatants were transferred to 1.5 mL microcentrifuge tubes (Beckman Coulter) and centrifuged in an ultracentrifuge at 100,000 x g for 1 h at 4°C ...
-
bioRxiv - Cell Biology 2019Quote: Viability of unlabeled and ferumoxytol-labeled murine MSCs (n=4) and human MSCs (n=3) was assessed by Trypan blue dye exclusion using ViCell (Beckman Coulter).
-
bioRxiv - Genetics 2020Quote: ... PCR products were pooled by region of interest using 2-3 μL of each reaction and the resulting pools of products were purified using a 1X Ampure XP cleanup (Beckman Coulter). Purified libraries were pooled and submitted for paired-end 150 cycle sequencing on an Illumina MiSeq ...
-
bioRxiv - Genomics 2021Quote: ... Cells were washed with 25 mm supplemented HBSS before depleting the sample of unnucleated cells using IOTest 3 Lysing solution (Beckman Coulter) following provider instructions ...
-
bioRxiv - Cell Biology 2020Quote: ... with densities ranging from 1.10 to 1.15 were pooled and washed in PBS (Beckman Ti50, 3 h at 42 000 rpm).
-
bioRxiv - Cancer Biology 2022Quote: ... 10 nM leptomycin b, vehicle control or library compounds (Supplementary Tables 2, 3) were added using an Echo liquid handler (Labcyte/Beckman Coulter). Cells were incubated for a further 24 h then fixed in 4% paraformaldehyde and stained with DAPI and Alexa Fluor 488 Phalloidin (ThermoFisher) ...
-
bioRxiv - Molecular Biology 2019Quote: ... Centrifugation was performed at 22 °C for 3 h at 217 874 g using a SW 40 Ti rotor (Beckman Coulter). Fractions of 600 µl were carefully collected manually ...
-
bioRxiv - Molecular Biology 2019Quote: ... followed by 3 h ultracentrifugation at 100,000 g and 4 °C using SW 32.1 Ti rotor (Beckman Coulter, Fullerton, California, USA). Resulting pellets were resuspended in 100 µl PBS and stored at −80 °C until further use ...
-
bioRxiv - Biochemistry 2020Quote: ... and pelleted for 3 min in a swing-out rotor at 1000 rpm in a tabletop centrifuge (Allegra X-30R, Beckman Coulter). The supernatant was aspirated and cells were suspended in the remaining liquid to 1 × 105 – 1 × 107 cells/100 μl ...
-
bioRxiv - Genetics 2020Quote: ... Timepoints were measured every 2-3 days by flow cytometry analysis of >7,000 cells (either a BD Accuri C6 or Beckman Coulter CytoFLEX). Data was analyzed using Cytoflow (https://github.com/bpteague/cytoflow ...
-
bioRxiv - Biophysics 2021Quote: The aggregation products formed in Eppendorf tubes under agitation conditions at pH 3 and pH 4 were centrifuged using an Optima MAX-XP ultracentrifuge (Beckman Coulter) in a TLA-55 rotor at 40,000 rpm at 20°C for 45 min ...
-
bioRxiv - Genomics 2020Quote: ... We carried out the first round of PCR for 3 cycles and purified the reactions with Ampure XP beads (Beckman-Coulter). We then carried out a second round of PCR with primers targeting the P5 and P7 sequences only ...
-
bioRxiv - Genomics 2021Quote: ... samples were purified with 45 µl of Agencourt AMPure XP magnetic beads with a sample to beads ratio of 3:2 (Beckman Coulter), normalized by Qubit quantification and pooled to generate a 4 nM library ...
-
bioRxiv - Cancer Biology 2022Quote: ... Cells were harvested after 3 days and counted using a Z2 Coulter Particle Count and Size Analyzer (Beckman Coulter, Brea, CA).
-
bioRxiv - Cancer Biology 2023Quote: Counting of CB CD34+ cells after 3 days of ex vivo co-culture was accurately obtained with flow-count fluorosphere beads (Beckman Coulter), in combination with the following antibodies ...
-
bioRxiv - Genetics 2023Quote: ... the cell pellet was resuspended in PBS supplemented with 2 % FCS and nucleated cells were counted in methylene blue with 3 % acetic acid on a Vi-Cell XR cell viability counter (Beckman Coulter). 10 × 106 bone marrow cells were resuspended in 200 μl of PBS supplemented with 2 % FCS containing the following antibody solution ...
-
bioRxiv - Cancer Biology 2024Quote: ... The percentage of fluorescence-positive cells was determined initially (baseline reference, passage 0, 3 days after transduction) and all following passages using the CytoFLEX Flow Cytometer (Beckman Coulter). In each passage ...
-
bioRxiv - Biophysics 2020Quote: ... The sample solution was centrifuged on a 60% glycerol cushion at 100,000 rpm (Beckman TLA-100 rotor) for 15 min at 30°C to precipitate the MTs ...
-
bioRxiv - Cell Biology 2020Quote: ... and gradients were spun 100,000rpm for 20min at 20°C in a TLA-100 ultracentrifuge rotor (Beckman). Top layers were collected ...
-
bioRxiv - Molecular Biology 2020Quote: ... Final libraries were then size selected for fragments between 100-1000bp using AMPure XP beds (Beckman Coulter) and quality was checked by DNA High Sensitivity bioanalyzer ...
-
bioRxiv - Molecular Biology 2020Quote: ... Fragments between 100 and 400 bp in size were selected using Agencourt AMPure XP beads (Beckman Coulter), according to the manufacturer’s instructions ...
-
bioRxiv - Genetics 2019Quote: ... Cell numbers in 100 μL of suspension were counted by Coulter Counter (Beckman Coulter, Brea, CA, USA) according to the manufacturer’s instruction and total cell numbers were calculated accordingly ...