Labshake search
Citations for Beckman :
351 - 400 of 439 citations for Octreotide acetate impurity H since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2024Quote: ... The final Hcp1-VLPs particles were pelletized by ultracentrifugation at 274,000 ×g at 4°C for 1 h in a SW41 Ti rotor (Beckman Coulter, Inc). The final pellet was resuspended in PBS pH 7.4.
-
bioRxiv - Microbiology 2024Quote: ... 0.2% Triton X-100 and 100 µg/mL chloramphenicol) and ultracentrifuged at 42500 rpm for 5 h in type 70 Ti rotor (Beckman Coulter) at 4°C ...
-
bioRxiv - Bioengineering 2023Quote: ... The gradient tube was balanced and subjected to ultracentrifugation at 150,000 × g for 2 h at 4 °C using a swinging-bucket rotor (SW 41 Ti Beckman Coulter, USA).
-
bioRxiv - Biochemistry 2024Quote: ... 50 mM Tris-HCl pH 7.4) and ultracentrifuged at 250 000 x g for 2 h (Beckman Optima TL 100 Ultracentrifuge). After ultracentrifugation ...
-
bioRxiv - Microbiology 2023Quote: ... viruses were collected and concentrated by ultracentrifugation (37,000 rpm, 2 h 30, 15 °C; Beckman Type 45 Ti fixed-angle rotor). The virus titer was determined using a plaque assay.
-
bioRxiv - Microbiology 2023Quote: ... The isopycnic centrifugation of DNA was performed with an initial CsCl buoyant density of 1.725 g mL-1 subjected to centrifugation at 177,000 × g for 36-40 h at 20 °C in an Optima XPN-80 ultracentrifuge (Beckman Coulter, USA). At the end of the centrifugation ...
-
bioRxiv - Immunology 2023Quote: ... The live singlets were counted using DAPI 1:10 dilution by mixing 45 μl of cell suspension with 5 μl DAPI by gating on FSC-A vs FSC-H measuring average event/ μl on Cytoflex (Beckman Coulter). Subsequently ...
-
bioRxiv - Biophysics 2023Quote: ... the SWCNT suspension was centrifuged at 30000 rpm (164 000 x g) for 4 h at 25 °C (Optima XPN-80, Beckman Coulter) to remove any remaining nanotube aggregates.
-
bioRxiv - Biophysics 2022Quote: ... EVs were separated from protein aggregates and free reagents by bottom-up density gradient centrifugation in sucrose for 17.30 h at 192,000 g and 4°C using a SW40 rotor (k-factor 144.5; Beckman Coulter, Fullerton, California, USA). Twelve fractions of 1 mL were then collected from the top of the gradient and respective densities were determined by refractometry using an Atago Illuminator (Japan) ...
-
bioRxiv - Neuroscience 2023Quote: ... The resulting supernatant was filtered with a membrane pore size of 0.2 μm (Whatman) and centrifuged at 120,000 × g for 4 h at 4 °C in polycarbonate bottle assemblies (Beckman coulter, 355603) in a 70.1 Ti fixed angle rotor (Beckman coulter ...
-
bioRxiv - Biophysics 2023Quote: ... The bottom-loaded 45-10% gradient was then centrifuged at 120 000 x gav for 16 h in a SW40 Ti Swinging Bucket rotor (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Biophysics 2023Quote: ... and 12-fold diluted in ice-cold SCL and subjected to ultracentrifugation at 100 000 x gav for 2 h in a Ti 70 fixed-angle rotor (Beckman Coulter). The resulting pellets were resuspended in SCL and freshly used for downstream analysis and never subjected to freezing and thawing.
-
Expanding the toolbox for phycobiliprotein assembly: phycoerythrobilin biosynthesis in SynechocystisbioRxiv - Synthetic Biology 2023Quote: ... Ultracentrifugation was performed in a SW40 Ti swinging-bucket rotor at 130000 × g for 16 h at 20 °C (Optima L-80 XP, Beckman Coulter).
-
bioRxiv - Microbiology 2023Quote: ... Samples were centrifuged at 35 000 rpm for 18 h in a Beckman SW41 rotor in an OptimaXE-90 Ultra-centrifuge (Beckman Coulter). Eleven fractions were manually collected from each tube ...
-
bioRxiv - Cancer Biology 2023Quote: ... in phenol red free media 24 h prior to addition of drugs through an automated robotic liquid handler (BioMek, Beckman Coulter). After 72h ATP-luciferase assay reagent was added (CellTiter-Glo ...
-
bioRxiv - Bioengineering 2023Quote: ... The gradient tubes were balanced and subjected to centrifugation at 135,000 × g for 2 h at 4 °C using a fixed-angle rotor (TLA-55, Beckman Coulter, USA). After DGUC ...
-
bioRxiv - Bioengineering 2023Quote: ... The gradient tubes were subjected to centrifugation at 135,000 × g for 2 h at 4 °C using a fixed-angle rotor (TLA-55, Beckman Coulter, USA). After DGUC ...
-
bioRxiv - Cell Biology 2024Quote: ... to a volume of ∼12 mL with PBS and separated by ultracentrifugation at 160.000 × g for 2 h (4 °C) in a SW Ti41 rotor (Beckman Coulter #331362). Top-layer LDs were collected by aspiration using a pre-wetted 200 µL pipette tip so that maximal LDs were collected in minimal buffer volume ...
-
bioRxiv - Biochemistry 2024Quote: ... Non-solubilized materials were removed by centrifuging the sample at 41,000 r.p.m for 1 h at 4 °C using rotor type 45 Ti in the OptimaTM L-100 XP Ultracentrifuge (BECKMAN COULTER). The resulting supernatant containing the solubilized LysP-GFP was incubated with Ni2+-NTA resin (Qiagen ...
-
bioRxiv - Molecular Biology 2024Quote: ... Transfected cells recovered for 72 h before sorting for single cell clones on a MoFlo Astrios EQ Cell Sorter (Beckman Coulter). Single cell clones were validated by genotyping and immunoblotting ...
-
bioRxiv - Microbiology 2024Quote: ... and resolved by ultracentrifugation at 36,000 rpm for 3 h at 4°C with the fastest braking in Optima XPN-80 Ultracentrifuge equipped with SW-41Ti rotor (Beckman Coulter). Gradients were fractionated (0.5 mL/fraction ...
-
bioRxiv - Neuroscience 2024Quote: ... The supernatants were collected and subjected to high-speed centrifugation at 100,000× g for 1 h (TLS-55 rotor, OptimaTMMAX Ultracentrifuge; Beckman Coulter, USA). The supernatants (S100 ...
-
bioRxiv - Microbiology 2024Quote: ... This sample was then ultracentrifuged at 150,000 g for 2.5 h at 4 °C using a Type 70 Ti or Type 45 Ti rotor in an Optima XE Ultracentrifuge (Beckman Coulter). The translucent VLP pellet formed by this process was resuspended in 200 μl PBS buffer ...
-
bioRxiv - Microbiology 2024Quote: ... Particles from the filtrate were concentrated by ultracentrifugation at 100,000 x g for 2 h at 4°C using an SW32Ti rotor in an Optima LE-80K centrifuge (Beckman Coulter). The pellets from different centrifuge tubes were pooled and resuspended in 1 mL of 1X PBS and pelleted again by ultracentrifugation at 165,700 x g for 2 h at 4°C in a TLA-55 rotor (Beckman Coulter) ...
-
Sense codon-misassociated eRF1 elicits widespread ribosome stalling and induction of quality controlbioRxiv - Molecular Biology 2024Quote: ... The mixture was layered over 900 μl of 1 M sucrose cushion 46 and ultracentrifuged at 100,000 rpm ( 543,000 × g) at 4°C for 1 h using a TLA-110 rotor and an Optima MAX-TL Ultracentrifuge (both Beckman Coulter).
-
bioRxiv - Molecular Biology 2024Quote: ... lysed by sonication and ultracentrifuged at 26K rpm at 4 °C for 2 h (using optima XPNs Ultra Centrifuge, Beckman Coulter). The clarified lysate was loaded onto pre-equilibrated Ni-NTA column ...
-
bioRxiv - Molecular Biology 2024Quote: ... The supernatant was then subjected to ultracentrifugation at 26K RPM at 4 °C for 2 h (using optima XPNs Ultra Centrifuge, Beckman Coulter). Cell-free extract so prepared was loaded onto 1 ml pre-equilibrated Ni-NTA column ...
-
bioRxiv - Molecular Biology 2024Quote: ... The supernatant was subjected to ultracentrifugation at 26K rpm at 4 °C for 2 h (using optima XPNs Ultra Centrifuge, Beckman Coulter). Cell lysate was loaded onto 1 ml pre-equilibrated Ni-NTA column ...
-
bioRxiv - Molecular Biology 2024Quote: ... The tube was centrifuged at 38,000 x g for 21-24 h at 4°C using the SW40T1 rotor in the Optima L-60+ Ultracentrifuge (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Microbiology 2024Quote: ... the supernatant was filtered through 0.45-μm syringe filters and ultracentrifuged at 100,000 ×g for 1 h at 4 °C (MLA-50 fixed angle rotor, Beckman Coulter, Germany). The supernatant was discarded ...
-
bioRxiv - Cancer Biology 2024Quote: ... The exosome pellet was resuspended in 35 ml of 0.2 μm-filtered 1x PBS and collected by ultracentrifugation at 100,000 × g for 2 h (45ti rotor, Optima L-100 XP Centrifuge, Beckman Coulter, USA). Exosome pellets were resuspended in 200-300 µL of 0.2 μm-filtered 1x PBS and stored at -80°C ...
-
bioRxiv - Cell Biology 2024Quote: ... The samples were centrifuged at 4°C for 24 h at 274,400 x g in a SW-40Ti rotor (Beckman Coulter Inc.). To remove KBr ...
-
bioRxiv - Biophysics 2020Quote: ... The lysates were clarified by centrifugation (16,000 rpm for 1 h at 4°C, rotor JA 25.50, Beckman Coulter, Brea, California, USA). The supernatant was incubated with amylose resin for 1 h at 4°C and loaded onto a 20 ml chromatography column (Bio-Rad ...
-
bioRxiv - Biophysics 2020Quote: ... Very small amounts of fibrillar species formed during this time were removed by ultracentrifugation for 1 h at 90000 rpm (Optima TLX Ultracentrifuge, Beckman Coulter, TLA-120.2 Beckman rotor, 288000 g). The excess monomeric protein and some small oligomers were then removed by multiple filtration steps using 100-kDa cut-off membranes ...
-
bioRxiv - Immunology 2021Quote: ... The pelleted exosomes from above supernatants were further centrifuged at 100,000g (26,450rpm) for 2 h at 4 °C (Beckman Coulter, Optima XE-90) and resuspended in PBS ...
-
bioRxiv - Microbiology 2021Quote: ... Samples were centrifuged at 130,000 × g for 2 h at 4°C in a TLA100.3 rotor (Beckman Optima TLX table top centrifuge). Following centrifugation ...
-
bioRxiv - Neuroscience 2021Quote: ... The post nuclear supernatant was transferred to an ultracentrifuge tube and centrifuged for 2 h at 245,000 g at 4 °C in a Beckman L90 Ultracentrifuge (Beckman Coulter, Mississauga, Canada) to pellet remaining membrane.
-
bioRxiv - Biochemistry 2020Quote: ... to a final volume of 1 ml and then further centrifuged (120000 g, 4°C, 2 h) in a TLA-120.2 rotor (Beckman Coulter, Brea, CA). Pellets were washed twice with 4°C cold PBS and centrifuged (120000 g ...
-
bioRxiv - Biochemistry 2020Quote: ... was layered on NaBr δ=1.28 g/mL and centrifuged at 207,000g for 22 h at 10 °C on a Beckman L8M centrifuge (Beckman, Palo Alto, CA). A tube layered with 20 mM Tris-HCl in lieu of the sample was used as a blank for density calculations ...
-
bioRxiv - Bioengineering 2021Quote: ... the culture medium was replaced with a similar volume of DMEM supplemented with 0.5% exosome-free FBS [the supernatants were centrifuged at 100,000 × g for 12 h (Beckman Coulter, Optima L-100XP) using normal FBS] ...
-
bioRxiv - Biophysics 2020Quote: ... The lysate was then centrifuged at 4° C in the SW32Ti rotor with a speed of 30,000 rpm for 1 h to pellet the membrane fraction using an Optima L-90K Ultracentrifuge (Beckman Instruments, Brea, CA). The pellet was resuspended in HND buffer and bulk membrane proteins were extracted by adding 2% ANAPOE-X-100 (Anatrace ...
-
bioRxiv - Microbiology 2020Quote: ... The supernatant was filtered by 0.22 μm nylon membrane followed by centrifugation through a cushion of 50 % (w/v) sucrose with 36,000 rpm at 4 °C for 4 h (Beckman SW41 Ti rotor). The pellet was resuspended with PBS and the copy number of DWV was quantified by qRT-PCR.
-
bioRxiv - Microbiology 2020Quote: ... were pelleted through a 20% (wt/vol) sucrose cushion at 25,000 rpm for 2 h in an SW41 rotor (Beckman Coulter, Tokyo, Japan). Then ...
-
bioRxiv - Microbiology 2020Quote: ... RNA was pelleted by centrifugation for 24 h at 4 °C and 104.000 g in a SW28.1 swing out rotor (Beckman Coulter, Brea, CA, USA). RNA was taken up in 100 µl H2O and 500 µl TS buffer was added ...
-
Micro RNAs are minor constituents of extracellular vesicles and are hardly delivered to target cellsbioRxiv - Cell Biology 2020Quote: ... Cat no UZ-PA-38.5-1) at 100,000 g at 4 °C for 2 h in a swinging-bucket rotor (Beckman Coulter; SW28 or SW32).
-
bioRxiv - Neuroscience 2022Quote: ... The crude viral lysate was purified with two rounds of CsCl gradient ultracentrifugation at 100,000×g and 4°C for 23 h using 13.5-mL Quick-Seal tubes and a NVT65 rotor (Beckman Coulter, Brea, CA). Each tube was placed gently and 500– 750 µL of white turbid bands were collected ...
-
bioRxiv - Molecular Biology 2020Quote: ... was subjected to centrifugation at 100,000g for 2 h in an Optima MAX-XP benchtop ultracentrifuge with a TLA-100.3 rotor (Beckman Coulter, Inc., Brea, CA). Pellets were resuspended in 100 µl PBS and stored at −80 °C.
-
bioRxiv - Pathology 2021Quote: ... Samples were weighed and balanced by adding PEB and centrifuged in TLA100.3 rotor at 100,000 rpm for 1.4 h in a pre-chilled ultracentrifuge (Beckman coulter Optima MAX-XP Ultracentrifuge). The supernatant was decanted ...
-
bioRxiv - Biochemistry 2020Quote: ... which was then centrifuged at 160,000×g at 4°C for 16 h in a Beckman MLS–50 rotor (Beckman–Coulter, CA, USA), and 24 fractions were collected ...
-
bioRxiv - Immunology 2020Quote: ... Plate was then incubated 1 h à 37 °C with 1 μg per well of alkaline phosphatase-coupled anti-Igκ or anti-IgM (Beckman Coulter) in PBS ...