Labshake search
Citations for Beckman :
251 - 300 of 1932 citations for Copper;5 10 15 20 tetrakis 4 methylphenyl porphyrin 22 24 diide since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2023Quote: ... Cells were harvested by centrifugation at 8000 g at 4°C for 20 min (Avanti® J-E centrifuge from Beckman Coulter, rotor: JLA 16.250).
-
bioRxiv - Bioengineering 2023Quote: ... subtilis spores were collected from the culture by the centrifugation at 8000 rpm at 4 °C for 20 min (Avanti J-E, Beckman Coulter Life Science, IN, USA). Supernatant was removed and the spore pellets were resuspended in fresh 100 mM PBS pH 7.4 ...
-
bioRxiv - Cancer Biology 2020Quote: ... equivalent amounts of ribosomes for each lysate was loaded onto each 10%-45% sucrose density gradient (BioComp Gradient Master machine) for ultracentrifugation at 33,000 rpm for 5 hours (Beckman Optima L80K Ultracentrifuge ...
-
bioRxiv - Cell Biology 2024Quote: ... 10% and 0% in buffered sucrose on top of one another in 5 ml Ultra-Clear centrifuge tubes (Beckman). Gradients were centrifuged for 16 h at 100,000 x g and 4 °C ...
-
bioRxiv - Molecular Biology 2020Quote: ... The resulting cDNA was PCR-amplified to about 10–20 ng/μl using a high-fidelity DNA polymerase and purified with the Agencourt AMPure XP Kit (Beckman Coulter Genomics). The cDNA samples were pooled based on the ratios according to the RNA concentrations of the input samples ...
-
bioRxiv - Biochemistry 2020Quote: ... The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor) to separate the soluble and detergent-enriched phases ...
-
bioRxiv - Genomics 2020Quote: ... Samples were eluted in 20 μL of elution buffer and 10 μL of each sample was pooled and concentrated to 20 μL using 0.7x AMPureXP beads (Beckman Coulter, Brea, CA). The final pooled sample was quantified using a Qubit Fluorometer and High Sensitivity DNA assay (Thermo Fisher Scientific ...
-
HIV-2 Immature Particle Morphology Provides Insights into Gag Lattice Stability and Virus MaturationbioRxiv - Microbiology 2023Quote: ... The pellet was resuspended in STE buffer and banded out over an OptiPrepTM step gradient (10, 20, 30% OptiPrepTM (v/v)) with a SW55 Ti rotor (Beckman Coulter, CA) at 45,000 rpm for 3 h ...
-
bioRxiv - Biochemistry 2022Quote: ... The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor) to separate the soluble and detergent-enriched phases ...
-
bioRxiv - Cell Biology 2024Quote: ... conditioned media were subjected to 10 min at 200g for 3 cycles (G146D centrifuge, Gelec®) and 20 min at 2000g (Allegra 64R Centrifuge, Beckman Coulter) to remove cellular debris and apoptotic bodies respectively ...
-
bioRxiv - Developmental Biology 2024Quote: ... 7 mL 1.4 g/mL CsCl and 22 mL cell lysate were layered from bottom to top in 38.5 mL tubes (Beckman Coulter, Brea, CA) and centrifuged at 110,880 x g for 1 h at 4°C ...
-
Potential for virus endogenization in humans through testicular germ cell infection: the case of HIVbioRxiv - Microbiology 2020Quote: ... CD45-PC7 Ab (clone J33, 1/15, Beckman Coulter), CD3-BV510 Ab (clone HIT3a ...
-
bioRxiv - Genomics 2021Quote: ... The spores were washed twice with sterile ddH2O and pelleted at 3700g for 5 min at 4 °C in an Allegra X-12R centrifuge (Beckman, Brea, CA, USA). Spores were resuspended in sterile ddH2O and kept at 4°C until experiments.
-
bioRxiv - Microbiology 2022Quote: ... then clarified by centrifugation at 2000 rpm at 4°C for 5 min in a refrigerated tabletop centrifuge (Beckman Coulter, Indianapolis IN, USA) to remove large debris ...
-
bioRxiv - Biophysics 2020Quote: ... Cells were counted every 24 h by flow cytometer (CytoFLEX S, Beckman Coulter), and in parallel ...
-
bioRxiv - Microbiology 2022Quote: ... Counting every 24 hrs was performed using a Z1 Coulter counter (Beckman Coulter) counting at a 1:200 dilution and averaging three counts per sample ...
-
bioRxiv - Molecular Biology 2021Quote: ... pombe cells were pelleted down for 10 min at 5000 rpm at 4°C (Rotor: F10-6X500, FiberLite Beckman J2-MC). The pellet was washed with buffer 1 (HEPES- 20 mM ...
-
bioRxiv - Bioengineering 2022Quote: ... The 60-70 mL were then divided equally into two 50-mL centrifuge tubes and spun down outside the anaerobic chamber at 4 °C and 3500 rpm for 10 min using an Allegra 64R ultracentrifuge (Beckman Coulter). Next ...
-
bioRxiv - Bioengineering 2022Quote: ... Each 250 mL culture was divided equally into six 50-mL centrifuge tubes and spun down at 4 °C and 3500 rpm for 10 min using an Allegra 64R centrifuge (Beckman Coulter). The supernatant was discarded and 6 mL of ice-cold 10% glycerol was used to wash and combine the six cell pellets into one suspension ...
-
bioRxiv - Molecular Biology 2020Quote: ... the lysate was incubated under rotation for 30 min at 4 °C and cleared for 10 min in an MLA-80 rotor (Beckman Coulter) at 11,500 xg and 4 °C ...
-
bioRxiv - Systems Biology 2020Quote: ... the 500xg supernatant was first spun at 10,000xg for 10 minutes at 4°C (Beckman Coulter, fixed angle rotor TLA 120.2) in 1 ml 11×34 mm polycarbonate uncapped centrifuge tubes (Beckman Coulter 343778) ...
-
bioRxiv - Cell Biology 2023Quote: ... Homogenates were then transferred to a 50 ml tube and centrifuged for 10 mins at 1 000 × g at 4°C (Beckman Coulter). The resulting supernatant was then transferred to microfuge tubes for storage at -80°C as whole liver lysates or to fresh ultracentrifuge tubes for further processing.
-
bioRxiv - Microbiology 2022Quote: ... respectively) by centrifugation at 4000 × rpm for 10 min at 4 °C using an Allegra® X-15R centrifuge (Beckman Coulter) and flash-frozen in liquid nitrogen before RNA isolation ...
-
bioRxiv - Molecular Biology 2024Quote: ... The obtained culture was pelleted at low speed (7000 rpm for 10 minutes at 4 0C in a Beckman Coulter centrifuge). Harvested cells were resuspended (1 g of cell pellet per 10 mL ...
-
bioRxiv - Biophysics 2020Quote: ... 150 μl of the sample was ultracentrifuged at 22°C and 205000 × g for 19 min (TLA 100.3, Beckman Coulter Inc., Fullerton, California). The experiments were performed in HEPES buffer ...
-
bioRxiv - Cell Biology 2022Quote: ... the culture supernatant was passed through a 0.22 μm filter to remove any remaining MPs and centrifuged at 100,000g for 90 minutes (SW-28 rotor, Beckman Coulter Optima LE-80K). Exosomes were concentrated with the Beckman Coulter Optima MAX Ultracentrifuge (TLA-55 rotor ...
-
bioRxiv - Microbiology 2020Quote: ... for 20 min (Beckman, JA18.0). The pellets were dissolved in TM buffer ((Tris-Mg2+ Buffer ...
-
bioRxiv - Neuroscience 2022Quote: ... The samples were then spun at 31000 x g (18468 rpm) for 5 min at 4°C in a fixed-angle rotor (50.2 Ti rotor in Beckman Coulter Optima L-100 XP) with slow brake ...
-
bioRxiv - Microbiology 2020Quote: ... virions were purified from the infected S2 cells by centrifugation at 8,000 RPM for 10 minutes at 4 °C using a Beckman GSA rotor (Beckman Coulter, Brea, California). The supernatant was then collected and centrifuged at 8,000 RPM for 30 minutes at 4 °C using a Beckman GSA rotor ...
-
bioRxiv - Cell Biology 2020Quote: ... The insect cells were harvested after 4 days by centrifugation at 300 x g for 10 min at 4 °C in an Avanti J-26S ultracentrifuge (JLA-9.1000 rotor, Beckman Coulter, Brea, CA). The cell pellet was resuspended in 5 ml ice-cold PBS and stored at −80 °C for further use ...
-
bioRxiv - Microbiology 2024Quote: ... Saliva was collected by expectoration into tubes on ice followed by centrifugation for 10 minutes at 4°C at 4000 x g (Beckman SX4750 rotor) to remove large debris and bacterial aggregates ...
-
bioRxiv - Plant Biology 2024Quote: ... The fluid was centrifuged at 1,000 x g for 10 minutes at 4 C using an Allegra X-30R centrifuge (Beckman Coulter Life Sciences). The resulting supernatant was centrifuged at 200,000 x g for 30 minutes at 4 °C using a Beckman Optima Ultracentrifuge with TLA110 rotor (Beckman Coulter Life Sciences) ...
-
bioRxiv - Biochemistry 2024Quote: ... Supernatant was incubated in a boiling water bath for 5 min and centrifuged for 10 min at 40,000 rpm (Beckman Ti45 rotor). Supernatant was supplemented with ammonium sulfate (1 g per 6.1 ml) ...
-
bioRxiv - Microbiology 2021Quote: ... the SBV samples were purified via sucrose density gradient centrifugation (10–50% range) at 32,500 rpm for 4 h with an SW 41 Ti Swinging-Bucket Rotor (Beckman Coulter Inc., Brea, CA). The SBV band that corresponded to the 40% sucrose gradient was harvested and then centrifuged at 25,000 rpm for 12 h ...
-
bioRxiv - Microbiology 2024Quote: ... was added to the supernatant on ice with constant stirring until protein precipitate was observed followed by centrifugation at 10,000 rpm at 4°C for 10 minutes (Beckman coulter, JA-25.50 rotor). The pellet was resuspended in 4 ml of binding buffer (20 mM Tris-HCl ...
-
bioRxiv - Cell Biology 2024Quote: ... 1:20 human FITC-BRIC6 (IBGRL Research) and 1:20 human APC-anti-CD49d (Beckman Coulter). For viability analyses ...
-
bioRxiv - Biochemistry 2024Quote: ... at 60,000 rpm at 20°C for 20 h in an OptimaMAX-XP ultracentrifuge (Beckman Coulter). Gradients were pumped out from bottom to top through a glass capillary tube attached to silicone tubing ...
-
bioRxiv - Plant Biology 2024Quote: ... The cell lysate was centrifuged at about 16000 g for 10 min at 5 °C (Avanti J-265 XP, Beckman Coulter, USA). The starch pellet was recovered ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C (Beckman Coulter). The pellet containing lentiviral particles was suspended in the residual medium ...
-
bioRxiv - Genomics 2020Quote: ... 4°C (Beckman Coulter). Supernatant was loaded onto 5 ml HisTrap FF columns (GE Healthcare ...
-
bioRxiv - Molecular Biology 2020Quote: ... 4°C (Beckman Coulter). Clarified lysates were poured several times over 0.5-1 ml Streptactin resin (IBA ...
-
bioRxiv - Cancer Biology 2023Quote: ... 4°C (Beckman Coulter). The pellet containing lentiviral particles was suspended in the residual medium ...
-
bioRxiv - Neuroscience 2020Quote: ... for further depletion of cell debris and spun at 10,000 × g for 30 min at 4°C (AH-650 rotor, Beckman Ultra-Clear Tube with 5 ml capacity). The pellet was resuspended in 100 μl PBS and considered to be the “10K pellet” (10K or 10K fraction) ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... 20 min at 20 000 g to pellet mitochondria (8 °C, 11 300 RPM, Beckman JA-13.1), 40 min at 20 000 g (8 °C ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... and further centrifuged 20 min at 20 000 g (8 °C, 11 300 RPM, Beckman JA-13.1) to pellet mitochondria after Percoll removal by dilution with 40 mL mitochondrial wash buffer (250 mM Sorbitol ...
-
bioRxiv - Biophysics 2024Quote: ... and centrifuged for 15 h at 25,000 rpm (Beckman SW 32 rotor). The fractions enriched with AE1 protein were collected and incorporated into lipid nanodiscs with a 1:5:250 molar ratio of protein ...
-
bioRxiv - Microbiology 2024Quote: ... Culture density was monitored by flow cytometry at 24 h intervals using a CytoFLEX (Beckman Coulter).
-
bioRxiv - Biochemistry 2020Quote: ... A Multisizer 4 (Beckman Coulter) machine was used ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (SW55Ti rotor, Beckman). The pellets were resuspended in 25% (w/v ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (VTi65.1 rotor, Beckman) with the maximum acceleration and minimum deceleration allowing for isopycnic separation of subcellular particles and membranes ...