Labshake search
Citations for Beckman :
201 - 250 of 443 citations for H Leu arg pro gly nh2 2hcl since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2023Quote: ... the liposomes were isolated by centrifugation for 3 h 40 mins at 55,000 rpm at 4°C in a SW 60 rotor (SW 60 Ti, Beckman). 20 µl were harvested from the top of the gradient and mixed with 8 µl of 4x Laemmli buffer (final 62.5 mM Tris-HCl ...
-
bioRxiv - Molecular Biology 2023Quote: ... Small extracellular vesicles were pelleted at 100,000 X g for 1,5 h at 4°C by using Ti-45 rotor (Beckman Coulter) and 70 ml polycarbonate bottles (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2023Quote: ... Pellets were pooled in 1 ml PBS and centrifuged at 100,000 X g for 1,5 h at 4°C in 1,5 ml tubes in a Ti-45 rotor (Beckman Coulter) using adapters (#11004 ...
-
bioRxiv - Cancer Biology 2023Quote: ... the obtained supernatant was filtered through a 0.22 μm filter before ultracentrifugation at 150,000 g for 2 h at 4 °C (Beckman Coulter). The nsEV-containing pellet was resuspended in phosphate buffer saline (PBS).
-
bioRxiv - Neuroscience 2023Quote: ... NP-40 prepared in DPBS] and then ultracentrifuged at 100,000x g for 1 h at 4 °C using a TLA-55 rotor (Beckman). The supernatant was removed ...
-
bioRxiv - Cell Biology 2023Quote: ... of proteins were applied on the top of a 16 ml 10-30% continuous sucrose density gradient and centrifuged at 74,400 g for 15 h at 4 °C (SW 32.1 Ti; Beckman Coulter). 24 equal volume fractions were collected ...
-
bioRxiv - Biochemistry 2023Quote: ... The mixture was incubated for 30 min at 4 °C and centrifuged at 100,000 × g at 4 °C for 1 h using a TLA100 fixed angle rotor (Beckman). The supernatant fraction was carefully removed ...
-
bioRxiv - Plant Biology 2024Quote: ... and centrifuged for 3 h at 260,000 g using an SW 55 Ti swinging-bucket rotor (Beckman Coulter, USA). The final supernatant was discarded ...
-
bioRxiv - Microbiology 2022Quote: ... 1 mM dithiothreitol and 100 μg/ml cycloheximide) and spun for 1 h at 100,000 rpm using TLA-110 rotor (Beckman) at 4 °C ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was centrifuged at 4°C and 35,000 rpm for 2.5 h using an SW 40 Ti rotor (Beckman Coulter). Afterward ...
-
bioRxiv - Microbiology 2022Quote: ... the cross-linked material was loaded onto glycerol-tartrate gradients as described elsewhere 53 and centrifuged for 1 h at 25,000 rpm in an SW-40 rotor (Beckman), with brakes set at the slowest possible deceleration ...
-
bioRxiv - Neuroscience 2022Quote: ... supernatant was centrifuged for 3 h at 115,000 g and 4°C using the XPN-80 ultracentrifuge equipped with a Ti70 rotor (Beckman). EV pellets were resolved in 1 mL ice-cold PBS (Gibco ...
-
bioRxiv - Microbiology 2022Quote: ... The post-nuclear supernatant was adjusted to 0.8 M sucrose and loaded in the middle of a step gradient ranging from 0.1 to 1.8 M sucrose in STKM buffer and centrifuged at 50’000 g for 1 h at 4°C in a TLA-120.1 fixed-angle rotor (Beckman Coulter). LDs formed a white cushion on top of the tube and were collected by aspiration of the upper fraction of the gradient (125 µl).
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and the pellet was resuspended in 25 ∝l lysis buffer ...
-
Comparative membrane proteomics reveals diverse cell regulators concentrated at the nuclear envelopebioRxiv - Cell Biology 2023Quote: ... The gradients then were centrifuged at 35,000 rpm (210,000g) for 1 h at 4°C with no brake in an SW41Ti rotor (Beckman Coulter). Two samples were collected from the nucleus gradient ...
-
bioRxiv - Neuroscience 2023Quote: ... the supernatant was collected and applied for further centrifugation at 40,000 rpm for 1 h at 4°C (45 Ti fixed-angle rotor, Beckman) to pellet the membranes ...
-
bioRxiv - Immunology 2023Quote: ... and then centrifuged at 260,800 x g for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman–Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and Red-C12 fluorescence of the starting material ...
-
bioRxiv - Microbiology 2024Quote: ... Samples within each biological replicate were centrifuged simultaneously for 2.5 h at 209,490 x g and 4°C using the SW41Ti rotor in an LE-80 ultracentrifuge (Beckman). Subsequently ...
-
bioRxiv - Cell Biology 2024Quote: ... Solutions of 15% and 23% Optiprep were layered on top or below the sample and centrifuged at 4°C for 16 h at 120,000g in a SW 28 Ti swinging bucket rotor (Beckman).
-
bioRxiv - Cell Biology 2024Quote: ... The gradients were centrifuged at 39,000 rpm for 2.5 h at 4°C using a SW41Ti rotor (Beckman Instruments), and 21 fractions of 0.5 ml were collected ...
-
bioRxiv - Synthetic Biology 2024Quote: ... The suspension was incubated at room temperature rotating for 1 h and then ultracentrifuged (38,000 rpm; Beckman 70Ti rotor) for 1 h at 4 °C ...
-
bioRxiv - Microbiology 2024Quote: ... Phage particles were pelleted by centrifugation at 75,000 x g at 4°C for 1 h using a 50.2 Ti rotor (Beckman Coulter) and resuspended in the phage buffer.
-
bioRxiv - Plant Biology 2024Quote: ... the supernatant after the 40,000 g spin was transferred to ultracentrifuge tubes and centrifuged at 100,000 g for 1 h at 4 °C (TLA100.3 rotor, Optima TLX Ultracentrifuge; Beckman Coulter). P40 and P100-P40 pellets were resuspended in cold and filtered VIB or 100 mM Tris pH 7.4 and either used immediately or stored at –80 °C until further use.
-
bioRxiv - Plant Biology 2024Quote: ... tubes and centrifuged at 40,000 g for 1 h at 4 °C (TLA100.3 rotor, Optima TLX Ultracentrifuge; Beckman Coulter). Where indicated ...
-
bioRxiv - Molecular Biology 2024Quote: ... the CP was centrifuged at 72,000 rpm (280,000 × g) for 1 h at 5 °C in a TLA-100.3 rotor (Beckman Coulter, USA) on a TL-100 ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2024Quote: ... the samples were centrifuged at 72,000 rpm (280,000 × g) for 1 h at 5 °C in a TL-100.1 rotor (Beckman Coulter, USA) on a TL-100 ultracentrifuge to pellet the reassembled VLPs ...
-
bioRxiv - Biophysics 2024Quote: ... The supernatant was then centrifuged for 1 h at 38000 rpm and 4 °C in a TI45 rotor (Beckman) to pellet the membranes ...
-
bioRxiv - Biochemistry 2024Quote: ... and membranes were removed by ultracentrifugation at 396,000 ×g for 1.5 h (55,000 rpm, Beckman L-90K, Ti70 rotor). The supernatant was filtered with a 0.45 μm syringe filter and applied to 1.5 mL anti-FLAG M2 affinity gel (Millipore Sigma ...
-
bioRxiv - Cell Biology 2024Quote: ... The percentage of cells expressing the reporter was determined 48 h post-infection via flow cytometry (FC500, Beckman Coulter). TCID50 was determined by titrating the multiplicity of infection (MOI ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Ribosomes were pelleted by centrifugation at 27,000 rpm (57,000 xg) for 16 h at 4 °C in a Ti-45 rotor (Beckman-Coulter). Ribosomes pellets were then resuspended in dissociation buffer (20 mM Tris-HCl pH 7.5 ...
-
bioRxiv - Microbiology 2020Quote: ... Excess dye was removed by ultracentrifugation of the virus through a 10% sucrose cushion for 2 h at 107,000 × g and 4°C using an SW41 rotor (Beckman Coulter). Labeled virus pellets were resuspended at a viral protein concentration of 1 mg/ml ...
-
bioRxiv - Biochemistry 2021Quote: ... 10 U/mL SuperASE-In and was ultracentrifuged at 100,000 × g for for 16 h at 4 °C in a SW Ti41 rotor (Beckman Coulter). After removing the supernatant ...
-
bioRxiv - Biophysics 2020Quote: ... Very small amounts of fibrillar species formed during this time were removed by ultracentrifugation for 1 h at 90000 rpm (Optima TLX Ultracentrifuge, Beckman Coulter ...
-
bioRxiv - Cell Biology 2020Quote: ... Crude mitochondria were loaded on top of the chilled gradient and separated at 100,000 Å∼ g for 1 h at 4°C (SW41 rotor; Beckman). Intact purified mitochondria were recovered from a brown band at around 16% Histodenz™ concentration ...
-
bioRxiv - Biochemistry 2022Quote: ... Viral particles were pelleted at 30,000 rpm for 1.5 h at 25°C in an Optima XPN ultracentrifuge using an SW 32 Ti rotor (Beckman Coulter), resuspended in 500 μL DMEM supplemented with 10% FBS ...
-
bioRxiv - Neuroscience 2021Quote: ... PMCA products were centrifuged at 45,000 rpm for 2.5 h at 4 °C (Optima™ Max Ultracentrifuge, Beckman Coulter, USA), the supernatants discarded and the pellets resuspended in an equal volume of PBS.
-
bioRxiv - Molecular Biology 2021Quote: ... The samples were centrifuged at 34,000 rpm at 4°C for 16 h using an SW60 Ti rotor (Beckman Coulter). Subsequently ...
-
bioRxiv - Molecular Biology 2020Quote: ... Debris was clarified by centrifuging at 18,000 ×g followed by fractionation on a discontinuous sucrose gradient (10-50 %) by ultracentrifugation at 39,000 rpm for 3 h in an SW41-Ti rotor (Beckman coulter). Monosome fractions were collected by pumping of Fluorinert FC-40 and using a fraction collector by measuring UV trace ...
-
bioRxiv - Molecular Biology 2020Quote: ... Gradients were centrifuged at 39 000 rpm for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman– Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Microbiology 2021Quote: ... Viral bands were pooled and re-precipitated by centrifugation in PBS(-) at 120k × g for 1.5 h in an SW55 rotor (Beckman Coulter) at 4°C ...
-
bioRxiv - Biochemistry 2020Quote: ... Protein expression was continued for 24 h before harvesting cells by centrifugation (4°C, 8000 rpm, 10 min in Beckman Coulter Avanti JXN-26 centrifuge ...
-
bioRxiv - Biochemistry 2020Quote: ... Protein expression was continued for 18 h before harvesting cells by centrifugation (4°C, 8000 rpm, 10 min in Beckman Coulter Avanti JXN-26 centrifuge ...
-
bioRxiv - Plant Biology 2020Quote: ... The sucrose gradient was centrifuged at 154,300 × g for 15 h at 4 °C using a SW 41 Ti rotor (Beckman Coulter). The LHCII proteoliposomes separated from empty liposomes were collected dropwise from the bottom of the tube and used for analysis.
-
bioRxiv - Biochemistry 2021Quote: ... Equal parts of 30% and 10% iodixanol gradient solutions were layered on the mitochondrial fraction and then samples were centrifuged at 50,000 x g for 2 h (Beckman SW41TI). The mitochondrial layer was collected ...
-
bioRxiv - Cell Biology 2021Quote: Microtubules were sedimented onto poly-L-lysine coated coverslips by centrifuging through 20% glycerol BRB80 cushion at 4700 rpm for 2 h in S6096 rotor (Beckman). Coverslips were subsequently fixed with 20°C methanol ...
-
bioRxiv - Microbiology 2020Quote: ... the sample was centrifuged for 16 h at 4°C and 100,000 rcf using a type 70 Ti rotor (Beckman Coulter). The pellet was gently washed with 500 μl of storage buffer (lysis buffer C + 10% (v/v ...
-
bioRxiv - Microbiology 2021Quote: ... The density gradient centrifugation was performed at 141,000 g and 4 °C for 20 h in a SW28 swing rotor (Beckman Coulter). A total of 18 fractions were collected starting from the top.
-
bioRxiv - Microbiology 2020Quote: ... was overlaid on 25% sucrose in PBS and centrifuged at 26,000 rpm for 3 h at 4C using SW28 rotor (Beckman Coulter). Pellets were dissolved in PBS overnight at 4C and 1/3 of used for RNA was extraction using Macherey Nagel Virus RNA isolation kit without carrier RNA according to the manufacturer’s recommendations ...
-
bioRxiv - Cell Biology 2021Quote: ... The post-nuclear supernatants were ultracentrifuged using SW41Ti rotor at 100,000 g for 3 h at 4 °C on Optima L-90K (Beckman Coulter). The fraction between 0.4–0.5 M sucrose was collected ...