Labshake search
Citations for Beckman :
201 - 250 of 549 citations for ATPase H+ Transporting V0 Subunit A1 ATP6V0A1 Antibody HRP since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2023Quote: ... the supernatant was collected and applied for further centrifugation at 40,000 rpm for 1 h at 4°C (45 Ti fixed-angle rotor, Beckman) to pellet the membranes ...
-
bioRxiv - Immunology 2023Quote: ... and then centrifuged at 260,800 x g for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman–Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Microbiology 2023Quote: ... 500 μ g of the lysate was loaded on the top of 15–50% sucrose gradient containing 100μ g/ml cycloheximide and the gradients were centrifuged at 36,000 rpm for 2 h at 4°C in SW41 rotor (Beckman). Density Gradient Fractionation System (ISCO ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and Red-C12 fluorescence of the starting material ...
-
bioRxiv - Plant Biology 2023Quote: ... The supernatant from this step was decanted into the new tubes and centrifuged at 39,800 x g for 2 h at 4 ⁰C (JA-17 rotor, Beckman Coulter ...
-
bioRxiv - Neuroscience 2023Quote: ... NP-40 prepared in DPBS] and then ultracentrifuged at 100,000x g for 1 h at 4 °C using a TLA-55 rotor (Beckman). The supernatant was removed ...
-
bioRxiv - Microbiology 2023Quote: ... The samples were centrifugated at 70000 rpm for 2 h at 4°C in an Optima TLX Ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... of proteins were applied on the top of a 16 ml 10-30% continuous sucrose density gradient and centrifuged at 74,400 g for 15 h at 4 °C (SW 32.1 Ti; Beckman Coulter). 24 equal volume fractions were collected ...
-
bioRxiv - Molecular Biology 2023Quote: ... Small extracellular vesicles were pelleted at 100,000 X g for 1,5 h at 4°C by using Ti-45 rotor (Beckman Coulter) and 70 ml polycarbonate bottles (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2023Quote: ... Pellets were pooled in 1 ml PBS and centrifuged at 100,000 X g for 1,5 h at 4°C in 1,5 ml tubes in a Ti-45 rotor (Beckman Coulter) using adapters (#11004 ...
-
bioRxiv - Neuroscience 2023Quote: ... the liposomes were isolated by centrifugation for 3 h 40 mins at 55,000 rpm at 4°C in a SW 60 rotor (SW 60 Ti, Beckman). 20 µl were harvested from the top of the gradient and mixed with 8 µl of 4x Laemmli buffer (final 62.5 mM Tris-HCl ...
-
bioRxiv - Genetics 2023Quote: ... Fifteen A260 units of WCEs were layered on a pre-chilled 10-50% sucrose gradient and centrifuged at 40,000 rpm for 2 h at 4°C in a SW41Ti rotor (Beckman). Gradient fractions were continuously scanned at A260 using the BioComp Gradient Station and polysome to monosome (P/M ...
-
bioRxiv - Cancer Biology 2023Quote: ... the obtained supernatant was filtered through a 0.22 μm filter before ultracentrifugation at 150,000 g for 2 h at 4 °C (Beckman Coulter). The nsEV-containing pellet was resuspended in phosphate buffer saline (PBS).
-
bioRxiv - Neuroscience 2023Quote: ... Samples were then centrifuged at 82,600×g at 4°C for 2 h (Beckman ultracentrifuge optima L-100 XP). After the first ultracentrifugation ...
-
bioRxiv - Biochemistry 2023Quote: ... The mixture was incubated for 30 min at 4 °C and centrifuged at 100,000 × g at 4 °C for 1 h using a TLA100 fixed angle rotor (Beckman). The supernatant fraction was carefully removed ...
-
bioRxiv - Cell Biology 2023Quote: ... Solutions of 15% and 23% Optiprep were layered on top or below the sample and centrifuged at 4°C for 16 h at 120,000g in a SW 28 Ti swinging bucket rotor (Beckman).
-
bioRxiv - Cell Biology 2024Quote: ... samples were ultracentrifuged at 160,000 xg for 2 h at 4 °C in ultracentrifuge tubes (Beckman Coulter Cat #328874). The resulting pellet contained the insoluble AMB-1 cell fraction and the supernatant contained the soluble fraction ...
-
bioRxiv - Cell Biology 2023Quote: ... Samples were spun at 200,000 × g at 4°C for 4 h in an MLS-50 rotor (Beckman Coulter), and 60 µL of top layer was collected ...
-
bioRxiv - Plant Biology 2024Quote: ... and centrifuged for 3 h at 260,000 g using an SW 55 Ti swinging-bucket rotor (Beckman Coulter, USA). The final supernatant was discarded ...
-
bioRxiv - Molecular Biology 2024Quote: ... and spun at 32,000 rpm (max 124,436 rcf) and 4 ºC for 13 h using SW55Ti rotor in Optima L80 (Beckman Coulter). The centrifuged samples were fractionated from the top of the sucrose gradient ...
-
bioRxiv - Neuroscience 2024Quote: ... Ultracentrifugation was performed for 2.5 h at 18 °C at 350,000 × g in a type 70 Ti rotor (Beckman Coulter). The interface between the 60 and 40% gradient was extracted along with the 40% layer ...
-
bioRxiv - Cell Biology 2024Quote: ... The supernatant was then subjected to ultracentrifugation at 100,000 x g for 2 h at 4 °C to sediment small EVs (Optima L-80K ultracentrifuge, Beckman Coulter ...
-
bioRxiv - Cancer Biology 2024Quote: ... 100 μg/mL cycloheximide) for 2 h at 40,000 g at 4 °C using an SW41 rotor (Beckman Coulter). Gradients were fractionated using Teledyne Isco Tris Peristaltic Pump and fractions were collected and pooled according to the UV trace ...
-
bioRxiv - Molecular Biology 2024Quote: ... and 1 M sucrose) at 100,000 rpm (543,000 × g) and 4°C for 1 h with a TLA110 rotor (Beckman Coulter) and an Optima MAX-TL Ultracentrifuge (Beckman Coulter) ...
-
bioRxiv - Microbiology 2024Quote: ... The phage was purified by isopycnic centrifugation in a CsCl discontinuous gradient for 5 h at 32,000 rpm in a SW41 rotor (Beckman) at 20°C ...
-
bioRxiv - Microbiology 2020Quote: ... Excess dye was removed by ultracentrifugation of the virus through a 10% sucrose cushion for 2 h at 107,000 × g and 4°C using an SW41 rotor (Beckman Coulter). Labeled virus pellets were resuspended at a viral protein concentration of 1 mg/ml ...
-
bioRxiv - Biochemistry 2021Quote: ... 10 U/mL SuperASE-In and was ultracentrifuged at 100,000 × g for for 16 h at 4 °C in a SW Ti41 rotor (Beckman Coulter). After removing the supernatant ...
-
bioRxiv - Biophysics 2020Quote: ... Very small amounts of fibrillar species formed during this time were removed by ultracentrifugation for 1 h at 90000 rpm (Optima TLX Ultracentrifuge, Beckman Coulter ...
-
bioRxiv - Cell Biology 2020Quote: ... Crude mitochondria were loaded on top of the chilled gradient and separated at 100,000 Å∼ g for 1 h at 4°C (SW41 rotor; Beckman). Intact purified mitochondria were recovered from a brown band at around 16% Histodenz™ concentration ...
-
bioRxiv - Biochemistry 2022Quote: ... Viral particles were pelleted at 30,000 rpm for 1.5 h at 25°C in an Optima XPN ultracentrifuge using an SW 32 Ti rotor (Beckman Coulter), resuspended in 500 μL DMEM supplemented with 10% FBS ...
-
bioRxiv - Neuroscience 2021Quote: ... PMCA products were centrifuged at 45,000 rpm for 2.5 h at 4 °C (Optima™ Max Ultracentrifuge, Beckman Coulter, USA), the supernatants discarded and the pellets resuspended in an equal volume of PBS.
-
bioRxiv - Molecular Biology 2021Quote: ... The samples were centrifuged at 34,000 rpm at 4°C for 16 h using an SW60 Ti rotor (Beckman Coulter). Subsequently ...
-
bioRxiv - Molecular Biology 2020Quote: ... Debris was clarified by centrifuging at 18,000 ×g followed by fractionation on a discontinuous sucrose gradient (10-50 %) by ultracentrifugation at 39,000 rpm for 3 h in an SW41-Ti rotor (Beckman coulter). Monosome fractions were collected by pumping of Fluorinert FC-40 and using a fraction collector by measuring UV trace ...
-
bioRxiv - Molecular Biology 2020Quote: ... Gradients were centrifuged at 39 000 rpm for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman– Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Microbiology 2021Quote: ... Viral bands were pooled and re-precipitated by centrifugation in PBS(-) at 120k × g for 1.5 h in an SW55 rotor (Beckman Coulter) at 4°C ...
-
bioRxiv - Molecular Biology 2019Quote: ... for 2 h at 4°C and then further purified using CsCl equilibrium gradient ultracentrifugation at 35,000 rpm (Beckman SW56) for 18 h at 4°C ...
-
bioRxiv - Biochemistry 2020Quote: ... Protein expression was continued for 24 h before harvesting cells by centrifugation (4°C, 8000 rpm, 10 min in Beckman Coulter Avanti JXN-26 centrifuge ...
-
bioRxiv - Biochemistry 2020Quote: ... Protein expression was continued for 18 h before harvesting cells by centrifugation (4°C, 8000 rpm, 10 min in Beckman Coulter Avanti JXN-26 centrifuge ...
-
bioRxiv - Plant Biology 2020Quote: ... The sucrose gradient was centrifuged at 154,300 × g for 15 h at 4 °C using a SW 41 Ti rotor (Beckman Coulter). The LHCII proteoliposomes separated from empty liposomes were collected dropwise from the bottom of the tube and used for analysis.
-
bioRxiv - Biochemistry 2021Quote: ... Equal parts of 30% and 10% iodixanol gradient solutions were layered on the mitochondrial fraction and then samples were centrifuged at 50,000 x g for 2 h (Beckman SW41TI). The mitochondrial layer was collected ...
-
bioRxiv - Cell Biology 2021Quote: Microtubules were sedimented onto poly-L-lysine coated coverslips by centrifuging through 20% glycerol BRB80 cushion at 4700 rpm for 2 h in S6096 rotor (Beckman). Coverslips were subsequently fixed with 20°C methanol ...
-
bioRxiv - Microbiology 2020Quote: ... the sample was centrifuged for 16 h at 4°C and 100,000 rcf using a type 70 Ti rotor (Beckman Coulter). The pellet was gently washed with 500 μl of storage buffer (lysis buffer C + 10% (v/v ...
-
bioRxiv - Microbiology 2021Quote: ... The density gradient centrifugation was performed at 141,000 g and 4 °C for 20 h in a SW28 swing rotor (Beckman Coulter). A total of 18 fractions were collected starting from the top.
-
bioRxiv - Microbiology 2020Quote: ... was overlaid on 25% sucrose in PBS and centrifuged at 26,000 rpm for 3 h at 4C using SW28 rotor (Beckman Coulter). Pellets were dissolved in PBS overnight at 4C and 1/3 of used for RNA was extraction using Macherey Nagel Virus RNA isolation kit without carrier RNA according to the manufacturer’s recommendations ...
-
bioRxiv - Cell Biology 2021Quote: ... The post-nuclear supernatants were ultracentrifuged using SW41Ti rotor at 100,000 g for 3 h at 4 °C on Optima L-90K (Beckman Coulter). The fraction between 0.4–0.5 M sucrose was collected ...
-
bioRxiv - Biophysics 2022Quote: SpeMreBs with a volume of 200 μL were polymerised for 1 to 6 h and centrifuged (100,000 rpm, 23°C, 120 min) in a TLA-100 rotor (Beckman Coulter). The pellet was resuspended in 200 μL of water ...
-
bioRxiv - Molecular Biology 2022Quote: ... The sucrose gradient was centrifuged at 24,400 rcf for 1 h at 4°C in a SW41Ti Swinging-Bucket Rotor (Beckman Coulter), and nuclei at the bottom of the gradient were resuspended in PBS ...
-
bioRxiv - Plant Biology 2021Quote: ... The thylakoid membranes with different densities were analytically separated at 125,000 × g and 4°C for 1 h (SW 41 Ti, Beckman Coulter).
-
bioRxiv - Microbiology 2021Quote: ... pspAX.2 and oligonucleotides were incubated for 48 h and GFP expression level was analyzed by CytoFLEX flow cytometer (Beckman).
-
bioRxiv - Neuroscience 2020Quote: ... The remaining supernatant (conditioned medium) was subjected to ultracentrifugation (UC) (100,000 x g 1 h) using rotors Ti45 or SW32Ti (Beckman Coulter). The pellet was rinsed with PBS and spun again using rotor SW55Ti (100,000 x g 1 h).