Labshake search
Citations for Beckman :
151 - 200 of 2157 citations for Cystatin C ELISA Kit 1 Plate since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genetics 2022Quote: ... A final DNase treatment was performed in 50 μL total volume using 1 μL of Turbo DNase incubated for 4 hours at 37°C followed by inactivation with 1 μL of 10% SDS and purification using RNA Ampure XP beads (Beckman Coulter).
-
bioRxiv - Microbiology 2019Quote: ... The concentrated vesicles were washed twice with PBS by ultracentrifugation at 110,000xg at 4°C for 1 hour (Beckman Optma MAX-XP Ultracentrifuge, rotor TLA 120.2; Beckman Coulter Inc., USA). The final pellet (exosomes ...
-
bioRxiv - Systems Biology 2020Quote: ... each resultant fraction underwent separate ultracentrifugation at 100,000xg for 40 minutes at 4°C (rotor TLA 120.2) in 1 ml 11×34 mm polycarbonate uncapped centrifuge tubes (Beckman Coulter 343778). In EV-enriched pooled fraction experiments ...
-
bioRxiv - Microbiology 2020Quote: ... Vesicles were obtained by centrifugation at 38,400 x g for 1 h at 4°C in an Avanti J-20XP centrifuge (Beckman Coulter, Inc). Pelleted vesicles were resuspended in 20 ml of 50 mM HEPES (pH 6.8 ...
-
bioRxiv - Microbiology 2020Quote: ... cells were fixed with 4% FA in PBS for 90 min at room temperature and immunostained for intracellular HIV-1 CA for 30 min at 4°C using KC57-FITC antibody (Beckman Coulter) diluted in 0.1% Triton X-100 ...
-
bioRxiv - Cell Biology 2023Quote: ... Homogenates were then transferred to a 50 ml tube and centrifuged for 10 mins at 1 000 × g at 4°C (Beckman Coulter). The resulting supernatant was then transferred to microfuge tubes for storage at -80°C as whole liver lysates or to fresh ultracentrifuge tubes for further processing.
-
bioRxiv - Bioengineering 2023Quote: ... The suspension was then ultracentrifuged (58,000 × g, 1 hr., 4 °C) in an Optima MAX-XP (Beckman Coulter, Indianapolis, IN, USA) to separate residual catalyst ...
-
bioRxiv - Microbiology 2024Quote: ... The final Hcp1-VLPs particles were pelletized by ultracentrifugation at 274,000 ×g at 4°C for 1 h in a SW41 Ti rotor (Beckman Coulter, Inc). The final pellet was resuspended in PBS pH 7.4.
-
bioRxiv - Cell Biology 2024Quote: ... plasma samples were thawed on ice and subjected to ultracentrifugation at 100,000 g for 1 hr or 18 hr at 4 °C (TLA-55 rotor; Optima MAX-MP Tabletop Ultracentrifuge, Beckman Coulter). Pellets were washed once in 1.0 ml PBS ...
-
bioRxiv - Neuroscience 2023Quote: ... The absorbance was recorded at 1 min intervals for 10 min at 340 nm at 30°C using a spectrophotometer (DU 800, Beckman Coulter). The enzymatic activity was determined as the change in absorbance/min/mg protein.
-
bioRxiv - Cell Biology 2021Quote: ... Hettich) at 4°C and then centrifuged at 40000 rpm for 4h30 at 4°C using SW41Ti rotor (Beckman). The supernatant was then UV inactivated at a wavelength of 254 nm for 4 min (3 times ...
-
bioRxiv - Biochemistry 2020Quote: ... the supernatant was mixed with GMPCPP-seeds from the prior step and then incubated at 37°C for 30 mins followed by centrifugation at 90,000 rpm for 10 min at 37°C (TLA120.1 Beckman Coulter). The microtubule pellets were rinsed twice with 100 μ! warm (37°C ...
-
bioRxiv - Neuroscience 2022Quote: ... and ultracentrifuged at 25,000 g for 20 min 4°C (or 50,000 g for 30 min 4°C) in a Beckman TLA100.3 rotor (Optima™ TLX Ultracentrifuge, Beckman). The pellet was discarded ...
-
bioRxiv - Microbiology 2023Quote: ... 1 μl or 10 μL of dilution were added to the 384-well plates using automated dispenser BioMek FX (Beckman Coulter). Extracellular bacteria were then eliminated by adding antibiotic to the media 1h after infection ...
-
bioRxiv - Biophysics 2019Quote: ... Total volume was centrifuged at 10000 xg for 30 minutes at 4°C at 10000 xg for 30 minutes at 4 °C (Beckman Coulter Optima L-80 XP Ultracentrifuge ...
-
bioRxiv - Immunology 2022Quote: ... for 30 min at 37°C and for 10 min at 80°C followed by a 1.2X AMPure XP beads (Beckman Coulter) cleanup ...
-
bioRxiv - Microbiology 2022Quote: ... and C capsids were separated by sedimentation at 50,000 x g and 4°C for 80 min (SW40Ti, Beckman Coulter) on linear 20 to 50% sucrose gradients in TKE buffer (20 mM Tris ...
-
bioRxiv - Genomics 2019Quote: ... 37°C for 30 min then cooled to 4°C before proceeding to a 2.2x Agencourt RNAClean XP cleanup (Beckman Coulter). The RNA was eluted in 11.5 μL nuclease-free water ...
-
bioRxiv - Microbiology 2023Quote: ... buffer C containing 73% sucrose and buffer C containing 53% sucrose were layered in a 13 ml tube (Beckman Coulter), starting from the bottom ...
-
bioRxiv - Microbiology 2023Quote: ... sucrose gradients prepared with buffer C and centrifuged for 16 h at 71,935 g at 4 °C in a SW28 rotor (Beckman Coulter). Gradients were fractionated on a Biocomp Piston Gradient Fractionator (BioComp Instruments ...
-
bioRxiv - Biophysics 2020Quote: ... The lysates were clarified by centrifugation (16,000 rpm for 1 h at 4°C, rotor JA 25.50, Beckman Coulter, Brea, California, USA). The supernatant was incubated with amylose resin for 1 h at 4°C and loaded onto a 20 ml chromatography column (Bio-Rad ...
-
bioRxiv - Genetics 2021Quote: ... A final DNase treatment was performed in 50 μL total volume using 1 μL of Turbo DNase with addition of the buffer incubated for 60 min at 37 °C followed by inactivation with 1 μL of 10% SDS and purification using RNA clean SPRI beads (Beckman Coulter, A63987).
-
bioRxiv - Immunology 2019Quote: ... SSM cultures were grown for ∼22 h at 36°C with shaking at 180 rpm until the OD600 reached 0.5 on a 1 cm path width spectrophotometer (Beckman Coulter DU 530). The cultures were then diluted to 1 × 109/ml with SSM.
-
bioRxiv - Biochemistry 2020Quote: ... to a final volume of 1 ml and then further centrifuged (120000 g, 4°C, 2 h) in a TLA-120.2 rotor (Beckman Coulter, Brea, CA). Pellets were washed twice with 4°C cold PBS and centrifuged (120000 g ...
-
Micro RNAs are minor constituents of extracellular vesicles and are hardly delivered to target cellsbioRxiv - Cell Biology 2020Quote: ... Cat no UZ-PA-38.5-1) at 100,000 g at 4 °C for 2 h in a swinging-bucket rotor (Beckman Coulter; SW28 or SW32).
-
bioRxiv - Molecular Biology 2023Quote: ... The cell lysate was centrifuged at 4 °C at 35000 rpm for 1 hour with Beckman Optima™ L-80XP Ultracentrifuge equipped with Ti45 rotor (Beckman, USA). The pellet containing membranes and cell debris was discarded ...
-
bioRxiv - Neuroscience 2022Quote: ... The loaded gradient was ultracentrifuged at 69,150 x g for 1 h at 4 °C (SW 41 Ti Swinging-Bucket Rotor, Beckman Coulter, Cat. #331362) and the synaptosome fraction was harvested from the interface between the two sucrose layers ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C in a TLA 100.3 rotor (Beckman). P13 ...
-
bioRxiv - Cell Biology 2022Quote: ... 4°C (Type 45 Ti rotor, Beckman Coulter) for 30 min to collect supernatant ...
-
bioRxiv - Biochemistry 2020Quote: ... 4 °C (Beckman Coulter Optima LE-80K Ultracentrifuge). The clarified lysate was placed in a beaker on a stir plate at 4 °C and concentrated ammonium sulfate (5 mM HEPES pH 7.5 ...
-
bioRxiv - Neuroscience 2019Quote: ... 4°C (Optima™ MAX Ultracentrifuge, Beckman Coulter) to sediment amorphous aggregates ...
-
bioRxiv - Biochemistry 2022Quote: ... 4 °C on a Sorvall WX90 ultracentrifuge (Beckman) with SW55Ti rotor ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C in SW-41Ti rotor (Beckman Coulter). Subsequently ...
-
bioRxiv - Plant Biology 2021Quote: ... 4 °C for 18 h (Beckman SW41 rotor). The sugar solution contains 0.65 M sucrose ...
-
bioRxiv - Biochemistry 2022Quote: ... 4°C using a SW41Ti rotor (Beckman Coulter). A BioComp fractionator was used to collect fractions 1 – 16 ...
-
bioRxiv - Neuroscience 2022Quote: ... at 4°C in a Beckman ultracentrifuge (Beckman). After centrifugation ...
-
bioRxiv - Developmental Biology 2024Quote: ... Compounds for screening were picked from source plates and transferred to assay plates using an Echo 555 acoustic transfer liquid handler (Labcyte/Beckman). Each drug was tested at a concentration of 1 µM directly added in the Hashimoto plate ...
-
bioRxiv - Cancer Biology 2024Quote: ... The cells mixed with polybrene and lentivirus were then plated in 1 mL aliquots onto 12 well plates and centrifuged at 2000 rpm (931 x g) [Allegra® X-15R Centrifuge (Beckman Coulter), rotor SX4750A] for 2 hours at 30°C ...
-
bioRxiv - Cell Biology 2021Quote: ... then 2ml of 40% sucrose (in buffer C) and 1ml of 20% sucrose (in buffer C) were sequentially overlaid and the SW55 tubes (13×51 mm, Beckman Coulter) were centrifuged at ∼150,000×g (38,500 RPM ...
-
bioRxiv - Genomics 2022Quote: ... was added to each reaction and incubated for 15 minutes at 37 °C followed by 15 minutes at 80 °C and the samples were purified using 1x AMPure XP beads (Beckman Coulter). For the Panhandle protocol ...
-
bioRxiv - Biophysics 2023Quote: ... The labeling reaction mixture was separated using on a C-18 reverse phase HPLC Column (Beckman Ultrasphere C-18, 4.6 25cm) that was pre-equilibrated with Buffer 1(filtered MilliQ with 0.1% Trifluoroacetic acid (Sigma-Aldrich)) ...
-
bioRxiv - Biochemistry 2022Quote: ... NanoGlo luciferase assay substrate was prepared at a 1:100 dilution according to manufacturer’s protocol and 3 μl NanoGlo substrate was added to each well of media transfer plate and cell source plate with a BioRAPTR FRD (Beckman Coulter). Nanoluciferase luminescence for each plate was read on a ViewLux plate reader (PerkinElmer ...
-
bioRxiv - Biophysics 2023Quote: ... Plasmids were transferred from 96-well plates into 384-well plates using a Biomek FX Automated Workstation (Beckman Coulter, model A31843). Each plasmid was pipetted into 4 consecutive wells within the 384-well plate ...
-
bioRxiv - Biochemistry 2020Quote: ... The sample was centrifuged at 4°C for 1 hour and 40 minutes at 182,753 x g (38,000 rpm in a Beckman Coulter Type 42.2 Ti rotor).
-
bioRxiv - Molecular Biology 2021Quote: ... 1 mM ATP and 1 mM PMSF) and centrifuged for 15 h at 4°C and 74 400 x g (Beckman SW 32.1 Ti). From the gradient ...
-
bioRxiv - Pharmacology and Toxicology 2019Quote: ... for 10 m at 4°C and pelleted the lysates at 50,000×g for 1 h at 4°C using an Optima MAX-XP ultracentrifuge (Beckman Coulter, Brea, CA, USA). We resuspended cell fractions in 500 μL water and stored the samples at 4°C until analysis ...
-
bioRxiv - Microbiology 2019Quote: ... the extracts were added on top of layers in LCM buffer with 45% and 5% glycerol and ultracentrifuged at 77 000 x g for 1 h at +4°C (Beckman Coulter SW41Ti rotor). Viral nucleocapsids were recovered from the bottom of the ultracentrifuge tube ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... the cell lysate was layered on top of a discontinuous OptiPrep® gradient (50 %, 35 %, 30 %, 20 %, and 15 %) and centrifuged at 135,000 g for 1 h at 4°C (Beckman L8-80M Ultracentrifuge, USA). The melanin pellet was recovered ...
-
bioRxiv - Microbiology 2023Quote: ... Cells were incubated further overnight at 20°C and subsequently harvested by centrifugation (Beckman rotor 8.1000, 5000 rpm, 15 min, 4°C). The pellet was resuspended in PBS ...
-
bioRxiv - Microbiology 2020Quote: ... 4°C in SW 60 Ti rotor (Beckman Coulter) to pellet cyanophage particles ...