Labshake search
Citations for Beckman :
151 - 200 of 605 citations for 6 Ethyl N N dimethyl 1H pyrrolo 2 3 b pyridine 3 methanamine since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2023Quote: ... using 10-40 % sucrose gradients in buffer A after 3 hours of centrifugation at 35,000 rpm and 4 °C in SW41 rotor (Beckman Coulter). To isolate ribosomes for structural analysis ...
-
bioRxiv - Molecular Biology 2022Quote: ... The gradients were ultra-centrifuged for 3 h at 175,000g at 4°C in a SW41Ti rotor (Beckman-Coulter, USA) and analyzed by measuring the absorbance continuously at 260 nm using a piston gradient fractionator (Biocomp Instruments) ...
-
bioRxiv - Molecular Biology 2022Quote: ... and spun at 40,000 rpm for 3 hours at 4°C using a SW 41 Ti Swinging-Bucket Rotor (Beckman Coulter). Sucrose gradient fractionation was performed by using a Brandel Density Gradient Fractionation System ...
-
bioRxiv - Microbiology 2022Quote: ... HUVECs or LECs were infected for 3 days and the GFP positive population was quantified by CytoFLEX S (Beckman Coulter). Here ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The gradients were ultra-centrifuged at 41,000 rpm for 3 hours at 4°C (Optima L-80 XP ultracentrifuge (Beckman-Coulter)) ...
-
bioRxiv - Molecular Biology 2023Quote: ... The reactions were then layered on 100 μL of 32% sucrose cushion and centrifuged at 42,800 rpm for 3 hours in a Beckman TLA 100 rotor using the Optima-Max TL ultracentrifuge (Beckman Coulter). After centrifugation ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 300,000×g at 4°C for 3 h in a TLA-110 fixed angle rotor (k-factor 13) (Beckman Coulter). The pellet was resuspended in 10 µL PBS of which 3 µL was adsorbed onto glow-discharged 2 nm carbon layer coated Quantifoil R1.2/1.3 400 mesh gold grids ...
-
bioRxiv - Molecular Biology 2023Quote: 8 mL of viral supernatant on a 3 mL of 20% sucrose cushion were ultracentrifugated for 3 h at 100,000 x g at 4°C using an Optima L80-XP instrument (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Microbiology 2023Quote: ... Each tube was centrifuged for 3 hours at 150’000 x g (4°C) using an Optima XPN-80 ultracentrifuge (Beckman Coulter) equipped with a SW 32 Ti swinging bucket (369650 ...
-
bioRxiv - Cell Biology 2023Quote: ... The obtained supernatant was layered onto 30 w/v% sucrose solution in ultracentrifugation tubes and subjected to ultracentrifugation at 100,000 × g for 3 h at 4°C using SW32Ti rotor (Beckman courter). The collected sucrose solutions were mixed with PBS and washed by ultracentrifugation at 100,000 × g for 1 h ...
-
bioRxiv - Biochemistry 2023Quote: ... The sucrose density gradient was centrifuged at 50,000 rpm for 3 hours at 4°C in a TLS-55 swinging bucket rotor (Beckman Coulter) with minimum acceleration up to 5,000 RPM and deceleration with no break ...
-
bioRxiv - Bioengineering 2023Quote: ... For performing cryogenic transmission electron microscopic imaging EVs were centrifuged and washed in PBS at 100,000 x g for 3 hours at 4°C in a SW41 Ti rotor (Beckman Coulter).
-
bioRxiv - Cell Biology 2023Quote: ... The concentrated CFS was then ultracentrifuged at 100,000 ˗ g and 4 °C for 3 h (Optima L-80 XP Ultracentrifuge with Type 70.1 Ti Fixed-Angle Titanium Rotor (Beckman Coulter)) ...
-
bioRxiv - Microbiology 2024Quote: ... The flow cytometry analysis of the bacterial cells present in the suspension was performed using a Cytoflex flow cytometer (CytoFLEX 3; Beckman) as previously described (Supplementary Fig ...
-
bioRxiv - Cancer Biology 2024Quote: ... The fragments were repaired the 3’and 5’overhangs using End repair mix (component of SureselectXT) and purified using Agencourt AMPure XP Beads (Beckman). The purified fragments were added with ‘A’ tail using A tailing Mix (component of SureSelectXT ...
-
bioRxiv - Neuroscience 2024Quote: ... at a ratio of 1:2.3 before layering on 3 ml of SCB in a 12 ml Thinwall Ultra-clear centrifuge tubes (Beckman Coulter). Samples were centrifuged at 30,000 xg for 45 min at 4 °C using a SW41 Ti swinging bucket rotor (Beckman Coulter ...
-
bioRxiv - Bioengineering 2024Quote: ... The sample tubes were then centrifuged at 347,000 × g and 20°C for 3 hours using a Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Plant Biology 2020Quote: MP of pollen protoplasts was assessed by staining with 1 µM DiBAC4(3) for 5 min (Breygina et al. 2010) on Gallios flow cytometer (Beckman Coulter), analysis was performed with FlowJo software (TreeStar) ...
-
bioRxiv - Genetics 2020Quote: ... PCR products were pooled by region of interest using 2-3 μL of each reaction and the resulting pools of products were purified using a 1X Ampure XP cleanup (Beckman Coulter). Purified libraries were pooled and submitted for paired-end 150 cycle sequencing on an Illumina MiSeq ...
-
bioRxiv - Genomics 2021Quote: ... Cells were washed with 25 mm supplemented HBSS before depleting the sample of unnucleated cells using IOTest 3 Lysing solution (Beckman Coulter) following provider instructions ...
-
bioRxiv - Microbiology 2021Quote: ... triplicate spore preparations were made in 3 ml of 20% glycerol and suspended in Isoton II (Beckman Coulter, Brea, CA, USA). The particle volume was then measured for a minimum of 100 000 particles per sample using a Multisizer 4e Coulter counter (Beckman Coulter ...
-
bioRxiv - Cell Biology 2020Quote: ... with densities ranging from 1.10 to 1.15 were pooled and washed in PBS (Beckman Ti50, 3 h at 42 000 rpm).
-
bioRxiv - Microbiology 2022Quote: A 3 ml volume of pseudoparticles was pelleted using a TLA-55 rotor with an Optima-MAX-E ultracentrifuge (Beckman Coulter) for 2 hours at 42,000 rpm at 4°C ...
-
bioRxiv - Molecular Biology 2022Quote: ... Samples were then enriched in DNA sizes between 200 and 600 bp (corresponding to 1 to 3 nucleosomes) using AMPure XP magnetic beads (Beckman-Coulter), following the manufacturer’s guidelines ...
-
bioRxiv - Molecular Biology 2019Quote: ... Centrifugation was performed at 22 °C for 3 h at 217 874 g using a SW 40 Ti rotor (Beckman Coulter). Fractions of 600 µl were carefully collected manually ...
-
bioRxiv - Molecular Biology 2019Quote: ... followed by 3 h ultracentrifugation at 100,000 g and 4 °C using SW 32.1 Ti rotor (Beckman Coulter, Fullerton, California, USA). Resulting pellets were resuspended in 100 µl PBS and stored at −80 °C until further use ...
-
bioRxiv - Cell Biology 2020Quote: ... 3 ml of 50% and 3 ml of 40% sucrose) in Ultra-Clear Beckman tubes and centrifuged at 26000 rpm (SW32Ti rotor, Beckman Coulter) for 1 h at 4°C ...
-
bioRxiv - Biochemistry 2020Quote: ... and pelleted for 3 min in a swing-out rotor at 1000 rpm in a tabletop centrifuge (Allegra X-30R, Beckman Coulter). The supernatant was aspirated and cells were suspended in the remaining liquid to 1 × 105 – 1 × 107 cells/100 μl ...
-
bioRxiv - Microbiology 2020Quote: ... The supernatant was ultracentrifuged at 120,000 g for 3 h at 4°C using an MLS-50 rotor (Beckman Coulter, USA) to collect 120k pellet vesicles ...
-
bioRxiv - Biophysics 2021Quote: The aggregation products formed in Eppendorf tubes under agitation conditions at pH 3 and pH 4 were centrifuged using an Optima MAX-XP ultracentrifuge (Beckman Coulter) in a TLA-55 rotor at 40,000 rpm at 20°C for 45 min ...
-
bioRxiv - Genomics 2020Quote: ... We carried out the first round of PCR for 3 cycles and purified the reactions with Ampure XP beads (Beckman-Coulter). We then carried out a second round of PCR with primers targeting the P5 and P7 sequences only ...
-
bioRxiv - Bioengineering 2022Quote: ... Supernatant (33 mL) was placed on a 3 mL 25% (w/v) sucrose pad in SW28 tube (Beckman, Brea, CA, USA) and centrifuged at 24,000 rpm ...
-
bioRxiv - Cancer Biology 2022Quote: ... Cells were harvested after 3 days and counted using a Z2 Coulter Particle Count and Size Analyzer (Beckman Coulter, Brea, CA).
-
bioRxiv - Cancer Biology 2023Quote: Counting of CB CD34+ cells after 3 days of ex vivo co-culture was accurately obtained with flow-count fluorosphere beads (Beckman Coulter), in combination with the following antibodies ...
-
bioRxiv - Molecular Biology 2024Quote: ... bottom layer was made by diluting OptiPrep™ solution with clarified HM or digesta sample (2.25 mL OptiPrep™ + 0.75 mL sample = 3 mL) into a 5 mL open-top thin wall ultra-clear tube (Beckman Coulter). A discontinuous gradient was made with 40% (w/v) ...
-
bioRxiv - Cell Biology 2023Quote: ... 30% Percoll (v/v)] followed by 3 mL of MRB in a 13 mL ultracentrifuge tube (Beckman Instruments, Inc, CA 331372) and spun at 95,000 x g for 45 min in a TH641 rotor ...
-
bioRxiv - Genetics 2023Quote: ... the cell pellet was resuspended in PBS supplemented with 2 % FCS and nucleated cells were counted in methylene blue with 3 % acetic acid on a Vi-Cell XR cell viability counter (Beckman Coulter). 10 × 106 bone marrow cells were resuspended in 200 μl of PBS supplemented with 2 % FCS containing the following antibody solution ...
-
bioRxiv - Cancer Biology 2024Quote: ... The percentage of fluorescence-positive cells was determined initially (baseline reference, passage 0, 3 days after transduction) and all following passages using the CytoFLEX Flow Cytometer (Beckman Coulter). In each passage ...
-
bioRxiv - Microbiology 2020Quote: ... 1mM dithiothreitol and 100μg/ml cycloheximide) and spun for 1h at 100K RPM using TLA-110 rotor (Beckman) at 4c ...
-
bioRxiv - Molecular Biology 2020Quote: ... Lysates were cleared by spinning at 3,000xg followed by 20,000xg for 10min each and supernatant were loaded on a 30% sucrose cushion and spun for 1h at 31,200 r.p.m in SW60 rotor (Beckman Coulter). The non-polysomal supernatant was removed and polysomes collected below the sucrose layer was diluted with the hypotonic buffer [10mM HEPES pH 7.8 ...
-
bioRxiv - Microbiology 2020Quote: ... 1mM dithiothreitol and 100μg/ml cycloheximide) and spun for 1h at 100K RPM using TLA-110 rotor (Beckman) at 4c ...
-
bioRxiv - Cancer Biology 2019Quote: ... CD10 PE-TR (B-Ly6; Beckman Coulter; www.beckmancoulter.com); CD14 FITC (M5E2) ...
-
bioRxiv - Immunology 2020Quote: ... a lyse-wash protocol (Optilyse B, Beckman-Coulter) was performed ...
-
bioRxiv - Microbiology 2020Quote: ... were added into cells (1×106 cells/sample in 100 μL) and incubated for 60 min at 2-6°C and analyzed using flow cytometry (CytoFLEX, Beckman Coulter).
-
bioRxiv - Neuroscience 2023Quote: ... After PCR the samples were combined into small pool of 2-6 samples and size selection was carried out by adding 0.55x volume of AMPure XP beads (Beckman Coulter, #A68831). The concentrations of purified library pools were quantified with Collibri™ Library Quantification Kit (ThermoFisher ...
-
bioRxiv - Molecular Biology 2020Quote: ... MgCl2 5mM and Tris-Cl 50mM pH 7.4) was added into 3-mL polycarbonate tube for an ultracentrifuge TL100.3 rotor (Beckman Coulter, Brea, CA, USA). The KCl-adjusted ribosome-containing solution was carefully added above the sucrose cushion and tubes were balanced by weight using buffer B (sucrose 250mM ...
-
bioRxiv - Molecular Biology 2021Quote: ... Produced amplicons of 3-144 µm eukaryotes and Imitervirales were purified with the magnetic beads (Agencourt AMPure XP beads, Beckman Coulter, Inc.). Finial DNA production was dissolved in 27.5 µL ultrapure water ...
-
bioRxiv - Plant Biology 2021Quote: ... sucrose was transferred to the bottom of the tube using a Pasteur pipette and centrifuged at 27,000 rpm for 3 hours at 4° C using an SW28 Ti rotor (Beckman Coulter, Brea, CA). Each pellet containing the virus particles was resuspended in 1 mL resuspension buffer overnight with gentle shaking at 4 °C ...
-
bioRxiv - Microbiology 2019Quote: ... The filtrate was then re-centrifuged at 125000 × g at 4° C for 3 hours (Optima™ L-XP ultracentrifuge, Beckman, USA). The obtained pellet was suspended in 300 µl sterile phosphate-buffered saline (PBS) ...
-
bioRxiv - Cell Biology 2021Quote: ... supplemented with 100 μg/ml cycloheximide) and centrifuged for 3 hours at 35,000 rpm in an SW41 rotor in a Beckman L7 ultracentrifuge (Beckman Coulter, Krefeld, Germany). The gradients were simultaneously fractionated on a Density Gradient Fractionation System (#621140007 ...