Labshake search
Citations for Beckman :
1451 - 1500 of 1639 citations for 1 Methoxy 4 1 methylbutyl benzene since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Bioengineering 2023Quote: ... The gradient tube was balanced and subjected to ultracentrifugation at 150,000 × g for 2 h at 4 °C using a swinging-bucket rotor (SW 41 Ti Beckman Coulter, USA).
-
bioRxiv - Biochemistry 2023Quote: ... then centrifuged at 27,000 gmax for 15 min at 4°C (Optima XPN-100 Ultracentrifuge, Beckman Coulter, with SW60 Ti rotor). Resuspension of the pellet (sub-mitochondrial particles ...
-
bioRxiv - Bioengineering 2023Quote: ... Samples were ultracentrifuged at 100,000×g for 70 min at 4°C using the Beckman OptimaTM L-80 XP ultracentrifuge (Beckman Coulter, CA). The supernatant was discarded ...
-
bioRxiv - Bioengineering 2022Quote: ... Cells were subsequently incubated with 2.5×103 CFSE-RJ-EVs per cell for 4 hours and analyzed with flow cytometry (CyAn ADP, Beckman Coulter, US). Treatment groups were compared to unstained control as well as CFSE-RJ-EVs without inhibitor ...
-
bioRxiv - Cell Biology 2022Quote: Whole bovine milk samples (200 mL) were centrifuged at 3,000 x g for 15 min at 4°C (Allegra X-15R, Beckman Coulter, France) to separate the fat from the skimmed milk ...
-
bioRxiv - Cell Biology 2022Quote: ... After ultracentrifugation at 200,000 x g for 5 h at 4°C (SW55Ti rotor in a XL-90 Beckman Coulter centrifuge), fractions containing purified EVs or purified phages were extracted from the top following the scheme in Supp ...
-
bioRxiv - Biochemistry 2022Quote: ... Soluble and insoluble fractions were isolated via centrifugation (90,000 x g, 30 min, 4 °C) in an Optima™ MAX-OP (Beckman Coulter) centrifuge using the TLA-100.3 rotor ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was recovered and centrifuged at 60,000 rpm for 15 min at 4°C in an Optima TL micro-ultracentrifuges (TLA 100.3 rotor Beckman Coulter, Fullerton, CA) to obtain the Golgi-enriched p100 pellet fraction ...
-
bioRxiv - Physiology 2022Quote: ... 40 ml of filtrates were ultracentrifuged twice in sterile 10.4 mL polycarbonate bottles at 100 000 x g for 70 min at 4°C using an Optima L-100 XP Ultracentrifuge equipped with 90 Ti Fixed-Angle Titanium Rotor (Beckman Coulter). The final EVs pellets were suspended in 200 µl of PBS (Lonza) ...
-
bioRxiv - Microbiology 2022Quote: ... respectively) by centrifugation at 4000 × rpm for 10 min at 4 °C using an Allegra® X-15R centrifuge (Beckman Coulter) and flash-frozen in liquid nitrogen before RNA isolation ...
-
bioRxiv - Neuroscience 2022Quote: ... layers F1/2 were removed before transferring the combined F3/4 layer into a clean 25mL centrifuge tube (Beckman Coulter, #355618) and diluting in GM buffer (at least 1:4 ...
-
bioRxiv - Biochemistry 2023Quote: ... The sample was run on the gradient for 16 hrs at 4 °C using an Optima XE-90 ultracentrifuge (SW40Ti rotor, Beckman-Coulter) at 30,000 rpm ...
-
bioRxiv - Cell Biology 2023Quote: ... and ultracentrifuged at 200,000 × g for 4 hours using a SW 55 Ti rotor in a Beckman OPTIMA90X ultracentrifuge (Beckman Coulter, USA). Finally ...
-
bioRxiv - Biophysics 2023Quote: ... the SWCNT suspension was centrifuged at 30000 rpm (164 000 x g) for 4 h at 25 °C (Optima XPN-80, Beckman Coulter) to remove any remaining nanotube aggregates.
-
bioRxiv - Genomics 2023Quote: ... cellular/protein debris were then collected by centrifugation at 1,000xg for 15 minutes at 4°C (Beckman Coulter Allegra X-14R), and the supernatant (DNA ...
-
bioRxiv - Biophysics 2022Quote: ... EVs were separated from protein aggregates and free reagents by bottom-up density gradient centrifugation in sucrose for 17.30 h at 192,000 g and 4°C using a SW40 rotor (k-factor 144.5; Beckman Coulter, Fullerton, California, USA). Twelve fractions of 1 mL were then collected from the top of the gradient and respective densities were determined by refractometry using an Atago Illuminator (Japan) ...
-
bioRxiv - Plant Biology 2024Quote: ... The tubes were then centrifuged for 20 min at 700 x g with slow acceleration at 4°C using a JA-14 rotor (Avanti J-20 XP centrifuge; Beckman Coulter). The resulting apoplastic wash collected was passed through a 0.22 µm membrane filter to remove bacteria and larger debris ...
-
bioRxiv - Microbiology 2024Quote: ... and resolved by ultracentrifugation at 36,000 rpm for 3 h at 4°C with the fastest braking in Optima XPN-80 Ultracentrifuge equipped with SW-41Ti rotor (Beckman Coulter). Gradients were fractionated (0.5 mL/fraction ...
-
bioRxiv - Cell Biology 2024Quote: ... to a volume of ∼12 mL with PBS and separated by ultracentrifugation at 160.000 × g for 2 h (4 °C) in a SW Ti41 rotor (Beckman Coulter #331362). Top-layer LDs were collected by aspiration using a pre-wetted 200 µL pipette tip so that maximal LDs were collected in minimal buffer volume ...
-
bioRxiv - Bioengineering 2024Quote: ... we first measured a cell line population in PBS suspension using a coulter counter (Beckman Coulter Multisizer 4, 100 μm aperture) to obtain a cell volume distribution with the standard unit ...
-
bioRxiv - Cell Biology 2024Quote: ... We loaded 2 mL of the homogenate mixture on top of a 3.92 ml 62% sucrose in MAB cushion in an Ultra-Clear 5/8” X 4” Beckman Coulter tube (344061, Beckman Coulter). We added the remaining sucrose in MAB solutions ...
-
bioRxiv - Microbiology 2024Quote: Bacterial isolates were grown overnight on LB agar and DNA extraction was performed using the GenFind v3 gDNA extraction kit according to standard protocol (Supp. Table 4) (Beckman Coulter). For the mock microbial community ...
-
bioRxiv - Neuroscience 2024Quote: ... The combined supernatants were centrifuged at 100,000 g for 40 min (4°C) on a TL110 rotor (Beckman Coulter, Paris, France) and the pellet was suspended in the same buffer ...
-
bioRxiv - Molecular Biology 2024Quote: ... lysed by sonication and ultracentrifuged at 26K rpm at 4 °C for 2 h (using optima XPNs Ultra Centrifuge, Beckman Coulter). The clarified lysate was loaded onto pre-equilibrated Ni-NTA column ...
-
bioRxiv - Molecular Biology 2024Quote: ... The supernatant was then subjected to ultracentrifugation at 26K RPM at 4 °C for 2 h (using optima XPNs Ultra Centrifuge, Beckman Coulter). Cell-free extract so prepared was loaded onto 1 ml pre-equilibrated Ni-NTA column ...
-
bioRxiv - Molecular Biology 2024Quote: ... The supernatant was subjected to ultracentrifugation at 26K rpm at 4 °C for 2 h (using optima XPNs Ultra Centrifuge, Beckman Coulter). Cell lysate was loaded onto 1 ml pre-equilibrated Ni-NTA column ...
-
bioRxiv - Molecular Biology 2024Quote: ... The tube was centrifuged at 38,000 x g for 21-24 h at 4°C using the SW40T1 rotor in the Optima L-60+ Ultracentrifuge (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Microbiology 2024Quote: ... Particles from the filtrate were concentrated by ultracentrifugation at 100,000 x g for 2 h at 4°C using an SW32Ti rotor in an Optima LE-80K centrifuge (Beckman Coulter). The pellets from different centrifuge tubes were pooled and resuspended in 1 mL of 1X PBS and pelleted again by ultracentrifugation at 165,700 x g for 2 h at 4°C in a TLA-55 rotor (Beckman Coulter) ...
-
bioRxiv - Microbiology 2024Quote: ... This sample was then ultracentrifuged at 150,000 g for 2.5 h at 4 °C using a Type 70 Ti or Type 45 Ti rotor in an Optima XE Ultracentrifuge (Beckman Coulter). The translucent VLP pellet formed by this process was resuspended in 200 μl PBS buffer ...
-
bioRxiv - Immunology 2024Quote: ... Centrifugation was performed (30 min, 800 g, 4 °C) in a swinging bucket on a Beckman Coulter JS-13.1 rotor (Beckman Coulter, USA). Hemocytes concentrated at each density interface were collected separately with a 70 mm long 20Gx2.75” needle mounted on a 1 mL syringe ...
-
bioRxiv - Cancer Biology 2024Quote: ... cells were resuspended in 100µL of PBS and stored at 4°C in the dark until samples were analyzed on a CytoFLEX LX Flow Cytometer (Beckman Coulter). Data was analyzed using FlowJo® software.
-
bioRxiv - Microbiology 2024Quote: ... Samples were balanced and centrifuged at 42,000 rpm for 35m at 4°C in a SW55Ti rotor and buckets with tube adaptors (Beckman REF: 356860). The supernatant was then concentrated to 80μl by spinning through Amicon 3kDa MWCO concentrator units at 14,000xg for 15-30m at 4°C ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... The total number of microglia (CD11b+ CD45+ cells) in the L3/4 spinal cord or SDH was analyzed using CytoFLEX SRT (Beckman Coulter) and FlowJo software (TreeStar) ...
-
bioRxiv - Molecular Biology 2024Quote: ... The obtained culture was pelleted at low speed (7000 rpm for 10 minutes at 4 0C in a Beckman Coulter centrifuge). Harvested cells were resuspended (1 g of cell pellet per 10 mL ...
-
bioRxiv - Genomics 2024Quote: ... We then pelleted this concentrate by centrifugation in a swinging bucket centrifuge (25,000g, 2 hours, 4°, Beckman Coulter SW 32 Ti) and resuspended it in cold PBS + 4% glucose ...
-
bioRxiv - Biochemistry 2024Quote: ... After centrifugation at 60,000 x g for 20 min at 4°C in a swing-out rotor (MLS-50, Optima Max-XP, Beckman Coulter), the mitochondrial fraction localized in the interphase between the two sucrose layers was carefully removed with a syringe ...
-
bioRxiv - Biophysics 2024Quote: ... SV experiments were performed at 20°C by UV intensity detection using a 4-hole An-60 Ti rotor and standard 2-channel 12-mm Epon charcoal-filled centerpieces (Beckman Coulter). Samples were run at 26,000 rpm ...
-
bioRxiv - Cell Biology 2024Quote: ... The samples were centrifuged at 4°C for 24 h at 274,400 x g in a SW-40Ti rotor (Beckman Coulter Inc.). To remove KBr ...
-
bioRxiv - Cancer Biology 2024Quote: ... supernatants were ultracentrifuged at 120,000 to 140,000 x g (SW-28 rotor) for 2 hours at 4°C to pellet EVs on an OptimaTM L-100 XP ultracentrifuge (Beckman Coulter). The supernatant was removed ...
-
bioRxiv - Cell Biology 2024Quote: ... cells were resuspended in PBS and stored in the dark at 4°C until analyzing them with a Navios flow cytometer (Beckman Coulter). At least 10’000 living cells were measured for each sample ...
-
bioRxiv - Biophysics 2021Quote: ... which were centrifuged at 3000 rpm for 15 minutes at 4°C using a fixed angle centrifuge (Beckman Coulter, Brea, CA, USA). After removal of excess supernatant ...
-
bioRxiv - Cancer Biology 2021Quote: Proliferation of IL-32 KO and WT mock cells was assessed by cell counting every day for 4 days using cell coulter (Beckman Coulter Diagnostics). Cell viability was assessed by Trypan blue staining or by annexin/PI flow cytometry and analyzed by FACS Diva software (BD Biosciences).
-
bioRxiv - Immunology 2021Quote: ... The pelleted exosomes from above supernatants were further centrifuged at 100,000g (26,450rpm) for 2 h at 4 °C (Beckman Coulter, Optima XE-90) and resuspended in PBS ...
-
bioRxiv - Microbiology 2021Quote: ... Samples were centrifuged at 130,000 × g for 2 h at 4°C in a TLA100.3 rotor (Beckman Optima TLX table top centrifuge). Following centrifugation ...
-
bioRxiv - Neuroscience 2021Quote: ... The post nuclear supernatant was transferred to an ultracentrifuge tube and centrifuged for 2 h at 245,000 g at 4 °C in a Beckman L90 Ultracentrifuge (Beckman Coulter, Mississauga, Canada) to pellet remaining membrane.
-
bioRxiv - Biophysics 2022Quote: ... The tubes were filled with PBS to reach the final volume and samples were ultracentrifuged at 120,000 g for 60 minutes at 4°C (70.1 Ti rotor, k-factor 36, Beckman Coulter, Brea, CA, USA). Finally ...
-
bioRxiv - Plant Biology 2020Quote: ... All samples were centrifuged in a single 2 h run with sedimentation at 50,000 g and 4°C using small 13 x 51 mm ultracentrifugation tubes in SW55 Ti rotor (Beckman Coulter, Krefeld, Germany). These centrifugation settings were optimized for polysome and monosome separations ...
-
bioRxiv - Cell Biology 2020Quote: ... Vacuoles were separated from free dye by centrifugation (100,000 x g, 25 min, 4°C, SW-60 Ti rotor, Beckman L8-80M Ultracentrifuge) and recovered from the 0%-4% interface ...
-
bioRxiv - Biophysics 2021Quote: ... then the supernatant was ultracentrifuged at 100000×g for 20 min at 4 °C using an Optima L-100K ultracentrifuge (Beckman Coulter, USA) equipped with a SW 40 Ti swinging bucket rotor ...
-
bioRxiv - Plant Biology 2021Quote: ... The resulting slurry was centrifuged for 15 min at 9000 rpm at 4 °C using a JA14 rotor (Beckman Coulter, Brea, CA). The supernatant was filtered with a Miracloth and kept on ice ...