Labshake search
Citations for Beckman :
101 - 150 of 701 citations for P N Nonylphenol Diethoxylate Ring 13C6 99% 100 Ug Ml In Methanol since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2020Quote: ... anti-CD45RO ECD (clone UCHL1, Beckman Coulter, Cat. M2712U, 1:100), anti-PD1 APC (clone NAT105 ...
-
bioRxiv - Neuroscience 2023Quote: ... All centrifugations were performed with Beckman TL-100 Ultracentrifuge (Beckman Coulter) at 4°C ...
-
bioRxiv - Neuroscience 2024Quote: ... for 30 minutes in a TLA-100 ultracentrifuge rotor (Beckman Coulter). The pellet was resuspended in the buffer containing 20 mM Tris-HCl at pH 8.0 ...
-
bioRxiv - Immunology 2021Quote: ... was from Thermo Fisher eBioscience. CD45RA (2H4LDH11LDB9) (dilution: 1/100; Cat. Number: IM2711U) was from Beckman Coulter ...
-
bioRxiv - Biochemistry 2020Quote: ... for ultra-centrifugation (centrifuge Optima TLX with rotor TLA 100, Beckman Coulter), which was carried out at 100,000 x g for 20 min at 4 °C ...
-
bioRxiv - Microbiology 2021Quote: ... Tubes were loaded into a TLN-100 near-vertical rotor (Beckman Coulter) and spun for 72 hours at 136,000 × gav and 20°C ...
-
bioRxiv - Immunology 2020Quote: ... 100 μl aliquots of Flow-Count Fluoroshperes (Beckman Coulter, catalog number 7547053) were added to each sample ...
-
bioRxiv - Microbiology 2024Quote: ... All tubes were spun in an Optima XPN-100 ultracentrifuge (Beckman Coulter) using a VTi 65.2 rotor at 177,000 g at 18 °C for 72 h with minimum acceleration and braking.
-
bioRxiv - Biophysics 2023Quote: ... then centrifuged at 95 krpm in a TLA-100 rotor (Beckman Coulter) at 4°C for 20 min ...
-
bioRxiv - Biophysics 2024Quote: ... and centrifuged at 150000×g for 2 h (Beckman XPN-100 Coulter) to obtain precipitate B ...
-
bioRxiv - Bioengineering 2024Quote: ... Crude lEVs were isolated by ultracentrifugation (Beckman XP-100, Ti 70 rotor) at 20,000 × g for 30 min ...
-
bioRxiv - Cancer Biology 2020Quote: ... The pellets were resuspended in 0.2 mL PBS and re-lysed with 1 mL OptiLyse C (Beckman Coulter) for 15 min ...
-
bioRxiv - Cancer Biology 2021Quote: ... 0.03 mg/ml) and RNAsi A (0.2 mg/ml) using a flow cytofluorimeter Epics XL apparatus (Beckman Coulter). Cell aggregates were gated out on bi-parametric graph FL-3lin/ratio as described in (Ferrara et al. ...
-
bioRxiv - Microbiology 2024Quote: ... 10 ml of viral stock was concentrated in 12 ml polypropylene tubes (14 x 89 mm, Beckman Coulter) by ultracentrifugation (Optima XPN-80 ...
-
bioRxiv - Molecular Biology 2023Quote: ... and 70 ml polycarbonate bottles (Beckman Coulter) in a Sorvall™ WX Ultra Series ultracentrifuge (Thermo Fisher) ...
-
bioRxiv - Cell Biology 2019Quote: ... 48 and 72 hours then concentrated by ultracentrifugation (Beckman Coulter Optima XL-100) for 1 hour at 25K in an SW28 rotor and resuspended in PBS.
-
Multimodal tubulin binding by the yeast kinesin-8, Kip3, underlies its motility and depolymerizationbioRxiv - Biophysics 2021Quote: ... A final spin at 30,000 x g in a TLA 100 rotor (Beckman) for 10 min at 4 °C was carried out to remove big aggregates.
-
bioRxiv - Biochemistry 2022Quote: ... The mixture was clarified by centrifugation at 90,000 rpm (TLA-100; Beckman Coulter) for 5 minutes at 4 °C ...
-
bioRxiv - Cell Biology 2019Quote: ... The sample was spun in a TLA-100 rotor (Beckman Coulter, Brea, CA) at 80,000 rpm for 30 minutes at 4°C and gel filtered on a HiLoad Superdex 75pg column (GE-Healthcare ...
-
bioRxiv - Molecular Biology 2024Quote: ... samples were cleaned up by adding 100 ul of SPRIselect beads (Beckman Coulter) and following the manufacturer’s instructions ...
-
bioRxiv - Neuroscience 2023Quote: ... cells were fixed and lysed in 100 µL of OptiLyse B (Beckman Coulter) for 10 min at RT ...
-
bioRxiv - Biophysics 2023Quote: ... This mixture was then spun down in a TLA-100 rotor (Beckman Coulter) at 9,892 g for 30 min at 4°C to sediment actin filament bundles into a low-speed pellet ...
-
bioRxiv - Bioengineering 2024Quote: ... and the resulting supernatant was then ultracentrifuged (Beckman XP-100, Ti 70 rotor) at 100,000 × g for 60 min to isolate crude sEVs ...
-
bioRxiv - Microbiology 2021Quote: ... and 500 μl of a 10 ml resuspension of cells from each flask diluted with 19.5 ml Isoton II Diluent (Beckman). PD time ...
-
bioRxiv - Biochemistry 2021Quote: Samples of filtered 0.5 mL plasma or CSF were added to 3.5 mL Open-Top Thickwall Polycarbonate ultracentrifuge tubes (Beckman Coulter), and PBS was added to fill tubes to the top ...
-
bioRxiv - Microbiology 2022Quote: ... Fractions were diluted in 5 ml PBS and washed by ultracentrifugation at 200,000 × g (60 min, 4°C, AH-650 rotor, 5 ml Beckman Ultra-Clear tubes ...
-
bioRxiv - Microbiology 2022Quote: CsCl linear gradients were prepared by overlaying 8.5 mL of 1.46 g/cm3 CsCl solution with 8.5 mL of 1.2 g/cm3 CsCl solution in 17 mL Ultra-Clear tubes (Beckman Coulter), which were then spun at a 45-degree angle and a speed of 20 rpm for 13.5 minutes using Gradient Master (BioComp).
-
bioRxiv - Plant Biology 2022Quote: ... was gently layered on top of 4.4 mL sucrose gradient solution (15 to 55%) in a 5.1 mL Quick-Seal polypropylene tube (Beckman Coulter) and centrifuged at 45,000 rpm for 65 min at 4°C (Sorval NVT 90 ...
-
bioRxiv - Neuroscience 2022Quote: ... myelin was layered onto 3 mL ice cold 0.85 M sucrose solution in a 10 mL ultracentrifuge tube (Beckman) before centrifugation at 75 000 x g for 30 min at 4 °C on a Beckman Ultracentrifuge with MLA-55 rotor (acceleration 7 ...
-
bioRxiv - Cell Biology 2022Quote: ... and 3.5 mL of 5% iodixanol in a 16.8 mL open top polyallomer tube (Beckman Coulter, Fullerton, California, USA). One milliliter of concentrated conditioned medium was pipetted on top of the gradient and samples were centrifuged for 18 h at 100,000 ×g and 4 °C using a SW 32.1 Ti rotor (Beckman Coulter ...
-
bioRxiv - Cell Biology 2024Quote: ... 1.6 ml of each fraction was very slowly layered in a 14 ml ultracentrifuge tube (Beckman Coulter, California, USA), starting from higher to lower concentrations ...
-
bioRxiv - Immunology 2023Quote: ... Layers of 2.1 mL of each solution were successively poured into 12.5 mL polyallomer tubes (Beckman-Coulter, Cat. # 331372), starting from the most concentrated solution (50 % ...
-
bioRxiv - Molecular Biology 2020Quote: ... The gradient was formed by adding 3 mL of the iodixanol solutions to a 17 mL polypropylene tube (Beckman Coulter). Ultracentrifugation was performed using a SW Type 32.1 Ti rotor in Optima XPN-100 Ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2020Quote: ... Four mL of each density (3.5 mL for the 5% density) was stacked into an open polyallomer tube (337986, Beckman Coulter) using a Tecan freedom EVO ...
-
bioRxiv - Microbiology 2021Quote: ... and 1.3 mL of 5% (v/v) glycerol in TNE buffer) in 5 mL thin-walled Ultraclear centrifuge tubes (Beckman Coulter). Viral nucleocapsids were pelleted by centrifugation at 23,000 rpm in an SW 55 Ti rotor for 1 h at 4°C ...
-
bioRxiv - Microbiology 2022Quote: ... and layered onto a preformed 11 mL 5% to 15% (wt/vol) Ficoll gradient in a 13.2 mL thin-wall polyallomer ultracentrifuge tube (Beckman Coulter). Gradients were centrifuged at 12,000 rpm for 2 h at 4°C in an SW41 Ti swinging-bucket rotor in a Sorvall Discovery SE ultracentrifuge ...
-
bioRxiv - Physiology 2019Quote: ... Agencourt AMPure XP PCR purification kit (5 ml Beckman Coulter Part No. A63880; 60 ml Beckman Coulter Part No. A63881) was used ...
-
bioRxiv - Cell Biology 2022Quote: ... 1 mL samples were supplemented with 500 uL of Optiprep to yield a 20% iodixanol solution and underlayered beneath 1.5 mL layers of 9% and 12% Optiprep/PBS solutions in a 4.9 mL OptiSeal tube (Beckman-Coulter, 362185) using a disposable glass cannula ...
-
bioRxiv - Neuroscience 2024Quote: ... at a ratio of 1:2.3 before layering on 3 ml of SCB in a 12 ml Thinwall Ultra-clear centrifuge tubes (Beckman Coulter). Samples were centrifuged at 30,000 xg for 45 min at 4 °C using a SW41 Ti swinging bucket rotor (Beckman Coulter ...
-
bioRxiv - Microbiology 2023Quote: ... A volume of 30 mL of supernatant was dispensed in two 38.5 mL ultracentrifuge tubes (Ultra-Clear, 25×89 mm, 344058, Beckman Coulter) before adding 5 mL of a 20% sucrose solution in NTE buffer (100 mM NaCl ...
-
bioRxiv - Microbiology 2023Quote: ... Each 250 mL batch of conditioned media was divided between six 39 mL QuickSeal Ultracentrifugation tubes (Beckman Coulter, Cat. # 342414) and OMVs isolated by ultracentrifugation at 100,000 x g (as described above) ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... 100 μl whole blood was added to antibody cocktails (mo-anti-CD159a-PE, Beckman Coulter ...
-
bioRxiv - Neuroscience 2019Quote: ... and again for 20 min at 100,000g with a TLA-100 rotor (Beckman Coulter). For IP ...
-
bioRxiv - Cell Biology 2021Quote: ... before removal of DNA fragments under 100 bp using AMPure XP beads (Beckman Coulter), followed by addition of dA tails by Klenow fragment (exo- ...
-
bioRxiv - Cell Biology 2020Quote: ... The supernatant was then centrifuged at 100 000g using 70Ti rotor (Beckman Coulter Genomics), for 120 min ...
-
bioRxiv - Cell Biology 2020Quote: ... Exosomes were then pelleted (TLA-100 rotor Beckman, 1 h at 90 000 rpm). Supernatants and pellets were then loaded on 12% SDS-PAGE and the indicated proteins were analyzed by Western blot.
-
bioRxiv - Biochemistry 2022Quote: ... Kinesin motor was pre-cleared by centrifugation at 90,000 rpm (TLA-100; Beckman Coulter) for 5 minutes at 4 °C ...
-
bioRxiv - Molecular Biology 2022Quote: ... Fractionation was performed by ultracentrifugation (Optima XPN-100, Beckman; SW-41Ti swinging bucket rotor) at 35,000 rpm for 3.5 hrs at 4 °C ...
-
bioRxiv - Biochemistry 2022Quote: ... kinesin motor was pre-cleared by centrifugation at 90,000 rpm (TLA-100; Beckman Coulter) for 5 minutes at 4 °C ...
-
bioRxiv - Genomics 2022Quote: ... DNA between 100-400 bp was selected for using AMPure XP beads (Beckman Coulter). Biotinylated DNA was pulled down using streptavidin coated magnetic beads and prepared for multiplex sequencing on an Illumina platform using the NEBNext Ultra II kit (NEB ...