Labshake search
Citations for Beckman :
101 - 150 of 1331 citations for 4 4 7 Triethoxy 7 Methyl 3 8 Dioxa 4 7 Disiladecane since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genomics 2023Quote: ... Five million cells were harvested at 315xg for 7 minutes in a 15 mL centrifuge tube (Beckman Coulter Allegra X-14R) and stored at -80°C ...
-
bioRxiv - Biochemistry 2024Quote: ... This extract was then carefully layered onto a 7% to 47% linear sucrose gradient and subjected to centrifugation in a SW41Ti rotor (Beckman Coulter) at 36,000 rpm for 2 h at 4°C ...
-
bioRxiv - Cell Biology 2024Quote: ... 96-well plates were incubated at the permissive temperature (15°C) for 7 days and then replicated with a Biomek FX (Beckman Coulter). These replica plates were incubated at the non-permissive temperature (25°C ...
-
bioRxiv - Bioengineering 2024Quote: Frozen TGFb1/ET1-treated and untreated hvCTS (n=7 per condition) and hvCOC (n=5 per condition) were lysed using Agencourt RNAdvance Tissue kit (Beckman Coulter) lysis buffer and homogenized at 1000 rpm for 2 min with 5 mm Stainless Steel Beads (Qiagen ...
-
bioRxiv - Cell Biology 2024Quote: ... We loaded 2 mL of the homogenate mixture on top of a 3.92 ml 62% sucrose in MAB cushion in an Ultra-Clear 5/8” X 4” Beckman Coulter tube (344061, Beckman Coulter). We added the remaining sucrose in MAB solutions ...
-
bioRxiv - Microbiology 2020Quote: ... The supernatant was filtered by 0.22 μm nylon membrane followed by centrifugation through a cushion of 50 % (w/v) sucrose with 36,000 rpm at 4 °C for 4 h (Beckman SW41 Ti rotor). The pellet was resuspended with PBS and the copy number of DWV was quantified by qRT-PCR.
-
bioRxiv - Biophysics 2024Quote: ... The gradients were then centrifuged at 187,000 × g for 4 h at 4°C in a SW 41 Ti rotor (Beckman Coulter, Brea, CA). Bands corresponding to purified virus particles (∼1.36 g/mL ...
-
bioRxiv - Microbiology 2020Quote: ... 4°C in SW 60 Ti rotor (Beckman Coulter) to pellet cyanophage particles ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (SW32Ti rotor, Optima L-80XP ultracentrifuge, Beckman) with the maximum acceleration and minimum deceleration ...
-
bioRxiv - Biochemistry 2021Quote: ... 4°C in swinging-bucket rotor SW40 (Beckman Coulter). Fractions (1 ml ...
-
bioRxiv - Microbiology 2022Quote: ... at 4°C cells were resuspended in Isoflow (Beckman) for further reading the percentage of fluorescent labelled cells on the cytometer (FC500 ...
-
bioRxiv - Microbiology 2022Quote: ... 4 °C (SW41 Ti Swinging-Bucket rotor, Beckman & Coulter). Bands containing virus particles were extracted with a syringe ...
-
bioRxiv - Biochemistry 2023Quote: ... counted using a coulter counter (Beckman Coulter, Multisizer 4) and seeded onto 24-well dishes (Nunc ...
-
bioRxiv - Cell Biology 2024Quote: ... at 4°C in a Ti70 rotor (Beckman Coulter). Clarified lysates were loaded using a sample pump or super-loop (Cytiva ...
-
bioRxiv - Biophysics 2021Quote: ... The VP2 capsid protein fractions were pooled and subjected to centrifugation at 28,000 rpm (139,065 × g) for 3 h at 4°C (Sw40Ti rotor, Beckman Coulter). The pellet was resuspended in 50 mM Tris (pH 7.4) ...
-
bioRxiv - Cell Biology 2021Quote: ... and centrifuged at 97,658 x g for 3 h at 4°C using a SW41Ti rotor (Beckman & Coulter, # 331362). The polysome fractions were collected using the Foxy R1 Fraction Collector and immediately snap frozen with liquid nitrogen and stored at −80 °C ...
-
bioRxiv - Cell Biology 2021Quote: ... and centrifuged at 40,000 rpm (∼128,000 × g) for 3 h at 4°C using an MLS-5 rotor (Beckman Coulter). Aldolase (158 kDa ...
-
bioRxiv - Plant Biology 2020Quote: ... 50 μg/ml cycloheximide) and centrifuged for 3 h at 55,000 g and 4 °C in a Type 70 Ti rotor (Beckman). The pellet was dissolved in 1% SDS ...
-
bioRxiv - Molecular Biology 2022Quote: ... Gradients were spun for 3 hours at 4° C and 36,000 RPM (221,632 x g) on SW41-Ti rotor (Beckman Coulter). Monosome fractions were isolated from each sucrose gradient with Brandel Density Gradient Fractionator using 1.5 mL/min flow speed and 60% CsCl ...
-
bioRxiv - Biochemistry 2022Quote: ... The membrane was solubilized for 3 hours at 4°C before separation by ultracentrifugation at 100,000 g (Ti45, Beckman) for 45 min ...
-
bioRxiv - Neuroscience 2022Quote: ... supernatant was centrifuged for 3 h at 115,000 g and 4°C using the XPN-80 ultracentrifuge equipped with a Ti70 rotor (Beckman). EV pellets were resolved in 1 mL ice-cold PBS (Gibco ...
-
bioRxiv - Microbiology 2023Quote: ... The tube was centrifuged for 3 hours at 150’000 x g (4°C) using a SW 32.1 Ti swinging bucket (369651, Beckman Coulter). Finally ...
-
bioRxiv - Neuroscience 2023Quote: ... the liposomes were isolated by centrifugation for 3 h 40 mins at 55,000 rpm at 4°C in a SW 60 rotor (SW 60 Ti, Beckman). 20 µl were harvested from the top of the gradient and mixed with 8 µl of 4x Laemmli buffer (final 62.5 mM Tris-HCl ...
-
bioRxiv - Neuroscience 2024Quote: ... Tubes were centrifugated at 100,000 x g (32,500 RPM) for 3 hours at 4°C using a SW55Ti rotor (Beckman Coulter). Synaptosomes enriched in the interface between 1.0-1.25 M sucrose were collected and diluted with ice-cold 0.1 mM CaCl2 ...
-
bioRxiv - Microbiology 2024Quote: ... the supernatants were loaded onto 1 mL of 30% sucrose in PBS buffer and centrifuged at 25,000 rpm at 4°C for 3 hours using the 90AT rotor (Beckman). The pelleted viral particles were resuspended in 100 μL of PBS and fixed with formaldehyde (working concentration 0.1% ...
-
bioRxiv - Cell Biology 2024Quote: ... The 100,000xg SEV-containing pellets were resuspended in 3 ml sterile cold PBS and repelleted at 100,000xg for 4 hrs in a TLA110 rotor (Beckman). SEVs were analyzed for size and number by nanoparticle tracking (ZetaView ...
-
bioRxiv - Cell Biology 2021Quote: ... Cell lysate was then applied on a continuous 7-47% sucrose gradient (mol weight/volume) in ultra clear tubes (Beckman & Coulter, #331372) and centrifuged at 97,658 x g for 3 h at 4°C using a SW41Ti rotor (Beckman & Coulter ...
-
bioRxiv - Biophysics 2022Quote: ... 50 μl of each sample was centrifuged at a speed of 180000Xg (180000 RCF) in 7 mm x 20 mm polycarbonate centrifugation tubes (Beckman Coulter, USA) for at least 2h ...
-
bioRxiv - Molecular Biology 2024Quote: ... The cells were harvested at 7 400 x g for 30 min in a JLA 9.1000 rotor (Beckman Coulter, Brea, California, USA), washed with 150 mM NaCl ...
-
bioRxiv - Biophysics 2022Quote: ... Fractions of EV-specific density were then pooled together and subsequently concentrated via ultracentrifugation (100,000 × g, 4 h, 4 °C) through a 20% w/v sucrose cushion in a SW41 rotor (Beckman Coulter, Fullerton, CA, USA). The resulting supernatant was discarded ...
-
bioRxiv - Biochemistry 2024Quote: ... Purified nucleosome arrays were subsequently isolated on 5-40% w/v sucrose gradients in 0.5X TE by centrifuging the gradients at 39,000 rpm and 4°C for 8 h in a SW41 Ti rotor (Beckman Coulter, Brea, CA). After centrifugation ...
-
bioRxiv - Cell Biology 2021Quote: ... The post-nuclear supernatants were ultracentrifuged using SW41Ti rotor at 100,000 g for 3 h at 4 °C on Optima L-90K (Beckman Coulter). The fraction between 0.4–0.5 M sucrose was collected ...
-
ACE2-lentiviral transduction enables mouse SARS-CoV-2 infection and mapping of receptor interactionsbioRxiv - Microbiology 2021Quote: ... UV-inactive SARS-CoV-2 was then partially-purified using a 20% sucrose cushion centrifuged at 175,000 x g for 3-4 hr using SW32Ti rotor (Beckman Coulter). The sample that has passed through the sucrose was collected and concentrated using Amicon Ultra-15 Centrifugal Filter Units with 100 kDa cutoff (Merck Millipore) ...
-
bioRxiv - Cell Biology 2021Quote: ... The samples were centrifuged at 4°C for 3 h at 100,000 g by using Avanti J-30XP (Beckman, USA), and the fractions were collected using a Brandel Fractionation System (USA ...
-
bioRxiv - Microbiology 2022Quote: ... 20 mL of the filtrate was then ultracentrifuged at 150,000 × g at 4°C for 3 h (Beckman Coulter, USA) through a 20% (w/v ...
-
bioRxiv - Molecular Biology 2023Quote: ... using 10-40 % sucrose gradients in buffer A after 3 hours of centrifugation at 35,000 rpm and 4 °C in SW41 rotor (Beckman Coulter). To isolate ribosomes for structural analysis ...
-
bioRxiv - Molecular Biology 2022Quote: ... The gradients were ultra-centrifuged for 3 h at 175,000g at 4°C in a SW41Ti rotor (Beckman-Coulter, USA) and analyzed by measuring the absorbance continuously at 260 nm using a piston gradient fractionator (Biocomp Instruments) ...
-
bioRxiv - Molecular Biology 2022Quote: ... and spun at 40,000 rpm for 3 hours at 4°C using a SW 41 Ti Swinging-Bucket Rotor (Beckman Coulter). Sucrose gradient fractionation was performed by using a Brandel Density Gradient Fractionation System ...
-
bioRxiv - Molecular Biology 2023Quote: 8 mL of viral supernatant on a 3 mL of 20% sucrose cushion were ultracentrifugated for 3 h at 100,000 x g at 4°C using an Optima L80-XP instrument (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The gradients were ultra-centrifuged at 41,000 rpm for 3 hours at 4°C (Optima L-80 XP ultracentrifuge (Beckman-Coulter)) ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 300,000×g at 4°C for 3 h in a TLA-110 fixed angle rotor (k-factor 13) (Beckman Coulter). The pellet was resuspended in 10 µL PBS of which 3 µL was adsorbed onto glow-discharged 2 nm carbon layer coated Quantifoil R1.2/1.3 400 mesh gold grids ...
-
bioRxiv - Microbiology 2023Quote: ... Each tube was centrifuged for 3 hours at 150’000 x g (4°C) using an Optima XPN-80 ultracentrifuge (Beckman Coulter) equipped with a SW 32 Ti swinging bucket (369650 ...
-
bioRxiv - Cell Biology 2023Quote: ... The obtained supernatant was layered onto 30 w/v% sucrose solution in ultracentrifugation tubes and subjected to ultracentrifugation at 100,000 × g for 3 h at 4°C using SW32Ti rotor (Beckman courter). The collected sucrose solutions were mixed with PBS and washed by ultracentrifugation at 100,000 × g for 1 h ...
-
bioRxiv - Biochemistry 2023Quote: ... The sucrose density gradient was centrifuged at 50,000 rpm for 3 hours at 4°C in a TLS-55 swinging bucket rotor (Beckman Coulter) with minimum acceleration up to 5,000 RPM and deceleration with no break ...
-
bioRxiv - Bioengineering 2023Quote: ... For performing cryogenic transmission electron microscopic imaging EVs were centrifuged and washed in PBS at 100,000 x g for 3 hours at 4°C in a SW41 Ti rotor (Beckman Coulter).
-
bioRxiv - Cell Biology 2023Quote: ... The concentrated CFS was then ultracentrifuged at 100,000 ˗ g and 4 °C for 3 h (Optima L-80 XP Ultracentrifuge with Type 70.1 Ti Fixed-Angle Titanium Rotor (Beckman Coulter)) ...
-
bioRxiv - Molecular Biology 2024Quote: ... The gradient was centrifuged at 54,000 rpm for 3 h at 4 °C using a SW55 Ti rotor (Beckman Coulter). After centrifugation ...
-
bioRxiv - Biochemistry 2024Quote: ... Equivalent amounts of cell lysates prepared as described above were loaded onto the sucrose gradients and spun at 35,000 g for 3 hours at 4°C in a SW41 rotor (Beckman Coulter). After centrifugation the polysomes were fractionated and absorbance was monitored at 254 nm for RNA and 680 nm for GFP using the TriaxTM Flowcell (BioComp Instruments) ...
-
bioRxiv - Cell Biology 2023Quote: ... 2.5 M sucrose in HK was added to the reaction to a final concentration of 1 M (“Input” sample) and transferred to 7 × 20 mm polycarbonate centrifuge tubes (Beckman Coulter cat #343775). HK buffer with 0.75 M sucrose was gently laid on top of the reaction mixture followed by a layer of HK ...
-
bioRxiv - Biophysics 2021Quote: ... centrifuged (Beckman Avanti, 1500 x g, 10 min, 4 °C) and pellets were flash-frozen and stored at −80 °C.