Labshake search
Citations for Beckman :
1351 - 1400 of 2183 citations for 6H 1 3 Thiazin 6 one 2 ethoxy 4 hydroxy 5 nitro 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2022Quote: ... respectively) by centrifugation at 4000 × rpm for 10 min at 4 °C using an Allegra® X-15R centrifuge (Beckman Coulter) and flash-frozen in liquid nitrogen before RNA isolation ...
-
bioRxiv - Neuroscience 2022Quote: ... The discontinuous sucrose gradient was centrifuged at 242K g for 47 min at 4 °C in a vertical rotor (VTi50 rotor, Beckman Coulter). The bulk GC fraction (GCF ...
-
bioRxiv - Microbiology 2022Quote: ... Lysates were then submitted to centrifugation at 100,000 g for 45 min at 4°C in an Ultracentrifuge Beckman XL-90 (Beckman France, Villepinte) equipped with a 70.1T1 rotor ...
-
bioRxiv - Cell Biology 2024Quote: ... Samples were then spun at 100,000 xg for 16 h at 4°C using a TLS-55 swinging-bucket rotor and benchtop ultracentrifuge (Optima Max-XP, Beckman Coulter). Fractions were collected and loaded in SDS-PAGE for WB.
-
bioRxiv - Cancer Biology 2024Quote: ... CRC cells were then cocultured at a 1:1 ratio with BMDCs for 4 hours and analyzed for uptake of CRC DNA by flow cytometry on the CytoFlex S cytometer (Beckman Coulter). Analysis was performed in FlowJo.
-
bioRxiv - Biophysics 2024Quote: ... The virions were harvested from the supernatant by centrifugation through 1.5ml of 30% sucrose at 10,000 RPM at 4°C for 2hrs (Beckman L8-70M Ultracentrifuge). The resulting pellet of virions was resuspended in 20ul of RIPA lysis buffer containing protease inhibitors.
-
bioRxiv - Molecular Biology 2024Quote: ... for ultracentrifugation at 100,000 rcf for 70 min at 4 °C using a Optima XE-90 ultracentrifuge with a SW 32 Ti rotor (Beckman Coulter). The EV pellet was resuspended in 0.22 μm-filtered sterile PBS and freshly-used or stored at −80 °C until further use ...
-
bioRxiv - Neuroscience 2024Quote: ... and centrifuged at ∼14.000 x g max (∼10900 x g average) for 22 min at 4 °C (Beckman Coulter, MAX-XP). After centrifugation ...
-
bioRxiv - Cell Biology 2024Quote: ... The samples were ultracentrifuged at 39,000 rpm at 4°C for 2.5 h in an SW41 rotor (Beckman Coulter, California, USA). Finally ...
-
bioRxiv - Microbiology 2023Quote: ... The normalized cultures were then centrifuged at 5030 x g and 4°C for 20 minutes on an Avanti J-26 XPI (Beckman-Coulter) centrifuge (JS 5.3 rotor) ...
-
bioRxiv - Microbiology 2024Quote: ... Most of the supernatant was discarded leaving 12x∼200 µL of concentrated broken pieces of genomic fiber that were pooled and layered on top of ultracentrifuge tubes of 4 mL (polypropylene centrifuge tubes, Beckman Coulter) containing a discontinuous cesium chloride gradient (1.4 ...
-
bioRxiv - Neuroscience 2023Quote: ... Supernatant were loaded on top of a discontinuous 0.75/1.0/2.33 M sucrose density gradient and centrifuge at 242,000 x g for 60 min at 4°C (Beckman SWTi41 swing rotor). The growth cone depleted fraction was collected between 0.75 M and 1.0 M sucrose ...
-
bioRxiv - Physiology 2023Quote: ... was ultracentrifuged twice in sterile 10.4 mL polycarbonate bottles at 100 000 × g for 70 min at 4°C (Optima L-100 XP Ultracentrifuge, 90 Ti Fixed-Angle Titanium Rotor; Beckman Coulter). The final EV pellet was suspended in 50 µl of PBS without Ca2+ and Mg2+ (Lonza ...
-
bioRxiv - Cancer Biology 2023Quote: ... and centrifuged at 100,000 x g either for 4 hr (hollow fiber bioreactor) or overnight (2D flask culture) in a SW32 rotor (Beckman Coulter). For the preparation of the density gradient ...
-
bioRxiv - Plant Biology 2023Quote: ... The cAW was collected by spinning at 700 x g for 20 min at 4 ⁰C (JA-14 rotor, Beckman Coulter; Avanti J-20TM centrifuge, Beckman Coulter). vAW was filtered through a single layer of Miracloth and was combined with the cAW ...
-
bioRxiv - Cell Biology 2023Quote: ... The cilia in the upper phase were sedimented by centrifugation (27,000 g, 4°C, 20 min; Beckman Coulter, Avanti JXN-26) and resuspended in Hepes-Magnesium-EGTA-Potassium (HMEK ...
-
bioRxiv - Biochemistry 2023Quote: ... The sample was run on the gradient for 16 hrs at 4 °C using an Optima XE-90 ultracentrifuge (SW40Ti rotor, Beckman-Coulter) at 30,000 rpm ...
-
bioRxiv - Cell Biology 2023Quote: ... and ultracentrifuged at 200,000 × g for 4 hours using a SW 55 Ti rotor in a Beckman OPTIMA90X ultracentrifuge (Beckman Coulter, USA). Finally ...
-
bioRxiv - Biophysics 2023Quote: ... the SWCNT suspension was centrifuged at 30000 rpm (164 000 x g) for 4 h at 25 °C (Optima XPN-80, Beckman Coulter) to remove any remaining nanotube aggregates.
-
bioRxiv - Genomics 2023Quote: ... cellular/protein debris were then collected by centrifugation at 1,000xg for 15 minutes at 4°C (Beckman Coulter Allegra X-14R), and the supernatant (DNA ...
-
bioRxiv - Biophysics 2022Quote: ... EVs were separated from protein aggregates and free reagents by bottom-up density gradient centrifugation in sucrose for 17.30 h at 192,000 g and 4°C using a SW40 rotor (k-factor 144.5; Beckman Coulter, Fullerton, California, USA). Twelve fractions of 1 mL were then collected from the top of the gradient and respective densities were determined by refractometry using an Atago Illuminator (Japan) ...
-
bioRxiv - Neuroscience 2024Quote: ... The same mass of total extracts was taken for a high spin at 154,000 g for 20 minutes in 4 °C using an ultracentrifuge (Beckman, TLX-120K) to obtain the supernatant soluble fraction (S1 ...
-
bioRxiv - Biochemistry 2023Quote: ... Mitochondrial crude was pelleted by centrifugation at 9500 ×g (4 °C, 15 min) using the Optima XE-90 Ultracentrifuge with a Ti-45 rotor (Beckman Coulter). The final pellet was resuspended in 2 mL of Resuspension buffer (250 mM sucrose ...
-
bioRxiv - Biochemistry 2023Quote: ... then centrifuged at 27,000 gmax for 15 min at 4°C (Optima XPN-100 Ultracentrifuge, Beckman Coulter, with SW60 Ti rotor). Resuspension of the pellet (sub-mitochondrial particles ...
-
bioRxiv - Bioengineering 2023Quote: ... Samples were ultracentrifuged at 100,000×g for 70 min at 4°C using the Beckman OptimaTM L-80 XP ultracentrifuge (Beckman Coulter, CA). The supernatant was discarded ...
-
bioRxiv - Plant Biology 2024Quote: ... The tubes were then centrifuged for 20 min at 700 x g with slow acceleration at 4°C using a JA-14 rotor (Avanti J-20 XP centrifuge; Beckman Coulter). The resulting apoplastic wash collected was passed through a 0.22 µm membrane filter to remove bacteria and larger debris ...
-
bioRxiv - Bioengineering 2024Quote: ... we first measured a cell line population in PBS suspension using a coulter counter (Beckman Coulter Multisizer 4, 100 μm aperture) to obtain a cell volume distribution with the standard unit ...
-
bioRxiv - Cancer Biology 2024Quote: ... cells were resuspended in 100µL of PBS and stored at 4°C in the dark until samples were analyzed on a CytoFLEX LX Flow Cytometer (Beckman Coulter). Data was analyzed using FlowJo® software.
-
bioRxiv - Microbiology 2024Quote: ... Samples were balanced and centrifuged at 42,000 rpm for 35m at 4°C in a SW55Ti rotor and buckets with tube adaptors (Beckman REF: 356860). The supernatant was then concentrated to 80μl by spinning through Amicon 3kDa MWCO concentrator units at 14,000xg for 15-30m at 4°C ...
-
bioRxiv - Microbiology 2024Quote: Bacterial isolates were grown overnight on LB agar and DNA extraction was performed using the GenFind v3 gDNA extraction kit according to standard protocol (Supp. Table 4) (Beckman Coulter). For the mock microbial community ...
-
bioRxiv - Immunology 2020Quote: ... and anti-CD27-PE-Cy5 (clone 1A4CD27; 2.5 μL; cat. # 6607107) and anti-NKG2A-APC (clone Z199; 5 μL; cat. # A60797) from Beckman Coulter (Supplementary Fig ...
-
bioRxiv - Biochemistry 2020Quote: ... The cultures were grown until OD600 of 0.8 at 37 °C and the cells were collected by centrifugation at 8,000 rpm for 5 minutes in JLA-16.25 rotor (Beckman Coulter), dissolved in 0.5 mL of HEPES:Polymix buffer ...
-
bioRxiv - Microbiology 2021Quote: ... liquid-captured bioaerosols (5 – 10 mL) were centrifuged for 10 minutes at 3000 × g (Allegra X-15R, Beckman Coulter) and resuspended in 200 μL of Middlebrook 7H9 medium supplemented with 100 μM DMN-tre ...
-
bioRxiv - Cell Biology 2021Quote: ... and the mixtures were ultracentrifuged at 80,000 rpm for 5 min at 30 °C using a TLA100 rotor and an Optima TLX ultracentrifuge (Beckman). The microtubule pellets were resuspended in PEM supplemented with 1 mM DTT ...
-
bioRxiv - Cell Biology 2020Quote: ... and 5 % solutions on top of each other in a 13.2 ml open-top polyallomer tube (331372, Beckman Coulter). The 1 ml concentrates were overlaid on top of the gradient ...
-
bioRxiv - Microbiology 2021Quote: ... Linear sucrose gradients were prepared by layering 1.8 ml each of sucrose solutions (wt/wt; prepared in 5 mM EDTA, pH 7.5) into 14-by 95-mm ultracentrifuge tubes (Beckman) in the following order ...
-
bioRxiv - Cancer Biology 2020Quote: ... equivalent amounts of ribosomes for each lysate was loaded onto each 10%-45% sucrose density gradient (BioComp Gradient Master machine) for ultracentrifugation at 33,000 rpm for 5 hours (Beckman Optima L80K Ultracentrifuge ...
-
bioRxiv - Microbiology 2022Quote: ... Cells were grown for additional 1 hour at 30 °C and the biomass was harvested by centrifugation (10,000 rpm, for 5 minutes, JLA-10.500 rotor (Beckman Coulter)).
-
bioRxiv - Biochemistry 2019Quote: ... The cell lysates were subjected to two rounds of centrifugation at 18000 rpm for 5 and 30 mins in a JA-25.50 rotor (Beckman). Bradford assay was used to normalize protein levels for co-immunoprecipitation and immunoblot analysis ...
-
bioRxiv - Genetics 2020Quote: ... 5 μL of each PCR reaction from the single worm lysate was pooled and purified by SPRI (Beckman Coutler) to remove unincorporated oligos ...
-
bioRxiv - Microbiology 2020Quote: ... The sample was vortexed for 10 s and incubated at room temperature for 5 minutes before centrifugation at 12,000 rpm (JA-15 1.5 rotor, Beckman Coulter) 4°C for 5 minutes ...
-
bioRxiv - Cell Biology 2022Quote: ... Resuspended pellets were then subjected to an iodixanol density gradient in 5-mL Ultra-Clear centrifuge tubes (Beckman Coulter). The tubes were first filled with a two-layer gradient ...
-
bioRxiv - Cell Biology 2022Quote: ... The stock solution of aggregate-depleted BSA (5% w/v) was prepared by overnight centrifugation at 100,000 x g (SW28 rotor Beckman Coulter ...
-
bioRxiv - Cell Biology 2022Quote: ... and 3.5 mL of 5% iodixanol in a 16.8 mL open top polyallomer tube (Beckman Coulter, Fullerton, California, USA). One milliliter of concentrated conditioned medium was pipetted on top of the gradient and samples were centrifuged for 18 h at 100,000 ×g and 4 °C using a SW 32.1 Ti rotor (Beckman Coulter ...
-
bioRxiv - Microbiology 2024Quote: ... respectively) were gently layered on top of each other in ultracentrifuge tubes (Ultra-Clear 5 mL Tube, Beckman Coulter) and a continuous gradient was generated using a gradient maker (Gradient Master ...
-
bioRxiv - Microbiology 2024Quote: ... The phage was purified by isopycnic centrifugation in a CsCl discontinuous gradient for 5 h at 32,000 rpm in a SW41 rotor (Beckman) at 20°C ...
-
bioRxiv - Plant Biology 2023Quote: ... Cell debris was removed by centrifugation at 1,300 g for 5 min (Beckman Centrifuge Avanti® J-26-XP). Afterwards ...
-
bioRxiv - Neuroscience 2023Quote: ... after which the cells were harvested by centrifugation at 4,000 rpm for 30 min at 5°C using the JLA 8.1000 rotor (Beckman Coulter). The harvested pellets were stored at −20°C until use ...
-
bioRxiv - Microbiology 2022Quote: ... the stained cells were detached by 5 mM of EDTA/PBS and analyzed with a CytoFLEX Flow Cytometer (Beckman). 10,000 events in a gated live cell population (based on SSC/FSC ...
-
bioRxiv - Cancer Biology 2023Quote: ... Percentage of cells with each DNA content (2N, 3N, 4N, 5-8N) were estimated using CytExpert software (Beckman Coulter). For DNA content analysis using sorted cells ...