Labshake search
Citations for Beckman :
951 - 1000 of 1639 citations for 1 Methoxy 4 1 methylbutyl benzene since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2023Quote: ... Fractions were diluted with 15 mL of cold PBS and centrifuged at 100,000 x g for 70 min at 4°C using a 70.1Ti rotor (Beckman). The supernatants were discarded and the pellets (containing EVs ...
-
bioRxiv - Molecular Biology 2023Quote: ... Digested extracts were then loaded on 1 M sucrose cushions 116 and centrifuged at 70,000 rpm for 2 hours at 4°C in a TLA100.4 rotor (Beckman). Ribosome pellets were resuspended in 300 µl of TRIzol reagent (Invitrogen) ...
-
bioRxiv - Biochemistry 2023Quote: ... Gradients were centrifuged at 35K rpm for 3 hrs at 4°C in a SW-41Ti rotor (Beckman) with maximum acceleration and no brake using a Beckman Optima L-90 Ultracentrifuge ...
-
bioRxiv - Microbiology 2023Quote: ... This OMV solution was then pelleted by ultracentrifugation at 100,000 x g for 3h at 4°C (Beckman Coulter Optima L-80 XP Ultracentrifuge ...
-
bioRxiv - Microbiology 2023Quote: ... concentrated by ultracentrifugation at 22.000 rpm for 2.5 h at 4°C (Optima™ XPN-80 – Beckman Coulter), redissolved in 100 µL of DMEM and stored in small aliquots at −80 °C ...
-
bioRxiv - Genomics 2023Quote: ... Extracts were then centrifuged at 148,000 g for 2.5 hours at 4°C using the SW 28 Ti rotor (Beckman). Resulting pellet was resuspended overnight at 4°C in 1.5 ml of HBSS ...
-
bioRxiv - Bioengineering 2023Quote: ... at 4°C using an Optima Max Ultracentrifuge and a TLA-55 rotor (Beckman Coulter, Brea, CA, USA). The pellet from this supernatant (i.e. ...
-
bioRxiv - Cell Biology 2023Quote: ... Mitochondrial membranes were pelleted at 72000 xg for 30 min at 4°C using an optimaTM ultracentrifuge (Beckman) with Beckman rotor (TLA 120) ...
-
bioRxiv - Biochemistry 2023Quote: ... samples were centrifuged at 80,000 rpm for 20 min at 4°C in a TLA-100.1 rotor (Beckman). The supernatant was carefully removed ...
-
bioRxiv - Cancer Biology 2023Quote: ... Following centrifugation at 50,000 rpm for 16 hours at 4 °C in SW 55 Ti Rotor (Beckman Coulter), fractions (100 μL each ...
-
bioRxiv - Cell Biology 2023Quote: ... The fraction containing TpPyShell was further concentrated by centrifugation (4000 g, 15 min, 4°C, SX4400 rotor; Beckman) with Amicon Ultra (M.W.4000 ...
-
bioRxiv - Cell Biology 2023Quote: ... Cells were harvested by two rounds of centrifugation (6,000 rpm, 10 min, 4°C, JLA-9.1000 rotor; Beckman), resuspended in Buffer A containing 50 mM Tris-HCl pH8.0 ...
-
bioRxiv - Cancer Biology 2023Quote: ... the high-speed centrifugation at 167,000g for 4 hours in an SW32 Ti swinging-bucket rotor (Beckman Coulter) was used to separate and further wash the EV from the concentrate collected in the previous step ...
-
Faa1 membrane binding drives positive feedback in autophagosome biogenesis via fatty acid activationbioRxiv - Biochemistry 2023Quote: ... Lysates were cleared by centrifugation (20,000 rpm for 45 min at 4°C in a Beckman SW45Ti rotor). The supernatant was incubated with IgG Sepharose beads (GE Healthcare ...
-
bioRxiv - Cell Biology 2023Quote: ... samples were centrifuged at 80,000 rpm for 20 min at 4°C in a TLA-100.1 rotor (Beckman). The supernatant was carefully removed ...
-
bioRxiv - Biophysics 2024Quote: ... Lysates were then clarified by centrifugation (100,000 xg, 60 min, 4 °C, JA 30.50 rotor, Avanti JXN-26 centrifuge (Beckman)) before filtering the supernatant through 0.45 μm syringe filters ...
-
bioRxiv - Cell Biology 2024Quote: ... Following an 18-hr centrifugation at 4°C (44,000 rpm, SW55 rotor, Beckman Optima LE-80 K Ultracentrifuge), 420-μl fractions (1-11 ...
-
bioRxiv - Cell Biology 2024Quote: ... The post-nuclear supernatants were centrifuged at 60,000 rpm for 60 min at 4°C with a TLA 120.2 rotor (Beckman) to collect ER-mitochondria-enriched fractions ...
-
bioRxiv - Microbiology 2024Quote: ... The cells were collected by centrifugation (8,000 rpm, 10 minutes at 4°C, JLA-10.500 rotor (Beckman Coulter)) ...
-
bioRxiv - Microbiology 2024Quote: ... cultures were harvested by centrifugation for 30 minutes at 5,000 rpm and 4 °C in an Avanti JXN-26 Floor Centrifuge using the JXN 12.500 rotor (Beckman). The resulting pellets were resuspended in 40 mL Lysis buffer (20 mM HEPES pH 7.5 ...
-
bioRxiv - Neuroscience 2024Quote: ... Ultracentrifugation was done at 134,000xg for 4h at 4°C using an SW 41 Ti rotor (Beckman Coulter) in an Optima XE-90 ultracentrifuge (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2024Quote: ... microsomes from the IVT reactions were first recovered by centrifugation at 4°C in the TLA55 rotor (Beckman) for 20 min at 55,000 rpm ...
-
bioRxiv - Immunology 2024Quote: ... and 20% OptiPrep density gradient at 100,000 × g overnight and at 4 °C (SW 40 Ti, Beckman Coulter). The following day ...
-
bioRxiv - Genomics 2024Quote: ... by centrifuging the chip facing downwards at 3,220 g for 5 min at 4 °C and purified with 1.5 × Ampure XP beads (Beckman), followed by DNA QC and trace checking.
-
bioRxiv - Cancer Biology 2024Quote: ... followed by ultracentrifugation at 100,000 g for 90 min at 4°C (45Ti or TLA110 rotors, Beckman Coulter). The pellet containing EVs was washed in cold 1x PBS (Gibco ...
-
bioRxiv - Biochemistry 2024Quote: ... and subjected to centrifugation at 35,000 rpm for 2.5 hr at 4 °C using a SW41Ti rotor (Beckman). The polysome profile in sucrose gradients was resolved using a Brandel gradient fractionator ...
-
bioRxiv - Biophysics 2024Quote: ... and the lysate was cleared by ultracentrifugation for 30 minutes at 4°C (Ti45 rotor, 37,000rpm, Beckman Coulter). The proteins were purified by affinity chromatography using an ÄKTA Start (GE Healthcare ÄKTA Start) ...
-
bioRxiv - Cancer Biology 2020Quote: ... and NEBNext® Multiplex Oligos for Illumina® (Index Primers Set 1 E7335S, Index Primers Set 2, E7500S) with Agencourt AMPure XP magnetic beads (Beckman coulter A63881) exactly as per manufacturer’s instructions ...
-
bioRxiv - Immunology 2021Quote: Immune cell types in Cohort 1 were measured from whole blood by 10-color flow cytometry with Navios flow cytometer (Beckman Coulter, CA, USA). Staining and gating strategies were previously described in detail by Aguirre-Gamboa et al ...
-
bioRxiv - Biochemistry 2020Quote: ... The labeled and unlabeled polymerized actin samples were pelleted down by ultracentrifugation at room temperature (45000 rpm for 1 hour, Beckman TLA-55 rotor). The pellets were rinsed once with 1 mL G-buffer and re-suspended into ice cold 0.5 mL G-buffer ...
-
bioRxiv - Microbiology 2020Quote: ... samples absorbance at 485 nm was measured in a 1 cm quartz cuvette using a DUTM 730 spectrophotometer (Beckman Coulter, Brea, CA, USA). 155 ...
-
bioRxiv - Cancer Biology 2022Quote: ... cells were incubated with an additional 400 µl 1× Binding Buffer and analyzed within 20 min by CytoFLEX S (Beckman Coulter Life Science). At least 1 × 104 cells were analyzed to determine the percentage of apoptotic cells ...
-
bioRxiv - Biochemistry 2022Quote: ... The polymerized actin samples were pelleted down by ultracentrifugation at room temperature (45000 rpm for 1 hour, TLA-55 rotor, Beckman Coulter, Indianapolis, IN). The pellets were rinsed once with a 1 mL G-buffer and re-suspended into ice-cold 0.5 mL G-buffer ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... Sequencing libraries for each replicate were generated via qPCR and sequencing libraries were purified and size selected using Ampure XP Beads at a 1.8:1 bead volume: library volume (Beckman Coulter, Brea, CA, USA). Library quality and transposition efficiency was accessed using a Fragment Analyzer and PROSize 2.0 (Agilent) ...
-
bioRxiv - Microbiology 2023Quote: ... The cells were then incubated for 30 minutes with the following antibodies: anti-HIV-1 core antigen (p24)-RD1 (Beckman Coulter catalog # 6604667), anti-TNFα PE/Dazzle 594 (BioLegend catalog # 502946) ...
-
bioRxiv - Cell Biology 2023Quote: ... 2.5 M sucrose in HK was added to the reaction to a final concentration of 1 M (“Input” sample) and transferred to 7 × 20 mm polycarbonate centrifuge tubes (Beckman Coulter cat #343775). HK buffer with 0.75 M sucrose was gently laid on top of the reaction mixture followed by a layer of HK ...
-
bioRxiv - Microbiology 2024Quote: ... labelled virus was purified through ultracentrifugation for 1 hour at 35,000 RPM using a rotor SW40Ti (Beckman Coulter Life Sciences, Brea, CA, USA), at 4 °C in a 6–30% OptiPrep (Sigma- Aldrich ...
-
bioRxiv - Biophysics 2024Quote: ... The cell lysate was centrifuged at 4 °C at 35000 rpm for 1 hour with a Beckman OptimaTM L-80XP Ultracentrifuge equipped with a Ti45 rotor (Beckman, Brea, CA, USA). The pellet containing membranes and cell debris was discarded ...
-
bioRxiv - Immunology 2024Quote: ... Cells were then washed in FACS buffer and fixed in 1% formalin before being suspended in FACS buffer and analyzed using a BD LSR II FACS system and Cytoflex (Beckman Coulter, Memorial University). Cell populations were gated based on viability dye and subjected to forward and side scattering to identify single cell population before additional analysis using Flowjo (BD Biosciences).
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were centrifuged at 26,000 xg for 25 min (Sorvall RC 5B Plus) followed by membrane isolation through ultracentrifugation at 55,000 pm for 1 h (Beckman, Type 70 Ti Rotor). Membranes were resuspended in HBS by mortar and pestle at 20 mL/g and snap-frozen in LN2 before storage at -80 °C until further use ...
-
bioRxiv - Neuroscience 2024Quote: ... Samples were centrifuged at 136,000 x g for 1 hour at ambient temperature using a Beckman Coulter Optima MAX-XP Ultracentrifuge with a TLA-55 rotor (Beckman Coulter, CA, USA). The resulting sarkosyl-insoluble pellet was washed in homogenization buffer containing 1% sarkosyl ...
-
bioRxiv - Biophysics 2021Quote: ... Cell debris was removed by centrifugation (12,000x□g for 15□min at 4°C) and membranes were then pelleted at 45,000 rpm in a Type 45 Ti rotor (Beckman) for 3□h at 4°C ...
-
bioRxiv - Biochemistry 2020Quote: ... Lysates were cleared by ultracentrifugation (40 000 rpm for 30 min at 4°C in a Beckman Ti45 rotor). Supernatant was filtered (0.45 μm ...
-
bioRxiv - Biochemistry 2020Quote: ... Lysates were cleared by ultracentrifugation (25 000 rpm for 30 min at 4°C in a Beckman Ti45 rotor). Supernatant was incubated with GSH beads (GE Healthcare ...
-
bioRxiv - Biochemistry 2021Quote: ... after which the lysate was clarified by centrifugation at 30,000 x g for 60 min at 4 °C in a JA 25.50 rotor in an Avanti J-E centrifuge (Beckman). Nucleic acids in the clarified lysate were precipitated by slowly adding polyethyleneimine with constant stirring in an ice bath to a final concentration of 0.4% ...
-
bioRxiv - Microbiology 2020Quote: ... of 1.5 mL and then centrifuged 45 min at 100,000g at 4°C in a TLA-100 ultracentrifuge (Beckman Coulter). The supernatant contains the soluble fraction and the pellet corresponds to the total membranes ...
-
bioRxiv - Cell Biology 2020Quote: ... 0.5 mM DTT, 100 μg/ml cycloheximide) and centrifuged (160,000 g, 120 min, 4°C) in an SW41Ti rotor (Beckman). After centrifugation the sediment in the tube went through a UV detector at the wavelength of 254nm and simultaneously the required fractions (>=5 ribosomes ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... The filtered supernatant from one 400 ml batch was then pelleted (1.5 hour at 24 000 rpm at 4 °C with Beckman Coulter L-90K centrifuge and 45 Ti rotor ...
-
bioRxiv - Biophysics 2022Quote: ... The sample was loaded on top of the glycerol gradient and centrifuged at 4°C for 18 h at a speed of 35,000 rpm in SW-41Ti rotor (Beckman). Fractions of 500 μL were collected ...
-
bioRxiv - Microbiology 2020Quote: ... Phage were pelleted by centrifugation at 82705 xg (25,000 rpm) for 4 hours using an SW28Ti rotor (Beckman Coulter). Phage pellets were gently resuspended overnight in 1 mL of phage buffer at 4°C with shaking ...