Labshake search
Citations for Beckman :
51 - 100 of 1754 citations for 6H Imidazo 4 5 1 ij quinolin 6 one 4 5 dihydro 9CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2021Quote: Cells were analyzed using 4-to 6-color direct immunofluorescence staining on a Cytoflex LX or S (Beckman Coulter) flow cytometer ...
-
bioRxiv - Cancer Biology 2021Quote: ... Libraries were further amplified 4–6 PCR cycles as described [43] and purified using AMPure XP beads (Beckman Coulter). ATAC-seq libraries were subsequently sequenced 2 x 75 bp on an Illumina NextSeq500.
-
bioRxiv - Microbiology 2022Quote: ... The gradient was spun at 45,000 rpm (~200,000 x g) for 6 hours at 4 °C in a SW60Ti rotor (Beckman Coulter). Successive 0.4 mL fractions were collected by pipetting and their densities measured ...
-
bioRxiv - Biochemistry 2019Quote: ... 4 °C (Beckman JLA 16.2500) and then bound to 0.1 cell paste volumes of anti-FLAG resin (Sigma M2 ...
-
bioRxiv - Biochemistry 2019Quote: ... 4 °C (Beckman JLA 8.1000), washed in pre-chilled PBS and resuspended in 20 cell paste volumes of preparation buffer (50 mM Tris pH 8 ...
-
bioRxiv - Biochemistry 2020Quote: ... A Multisizer 4 (Beckman Coulter) machine was used ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (SW55Ti rotor, Beckman). The pellets were resuspended in 25% (w/v ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (VTi65.1 rotor, Beckman) with the maximum acceleration and minimum deceleration allowing for isopycnic separation of subcellular particles and membranes ...
-
bioRxiv - Biochemistry 2021Quote: ... 4°C (SW41 rotor, Beckman). The supernatant was concentrated with a 100-kDa molecular weight cutoff concentrator (Merck Millipore ...
-
bioRxiv - Cancer Biology 2023Quote: ... cells were seeded into 6-well plates at a concentration of 4×105 cells per well and counted cumulatively with a Coulter counter (Beckman) every three days for two weeks ...
-
bioRxiv - Cell Biology 2023Quote: ... down to 6 ml and ultracentrifuged at 10,000xg for 16 min at 4°C in MLA-80 rotor (Beckman Coulter). The pellet was resuspended and washed with PBS at the same conditions (volume ...
-
bioRxiv - Immunology 2021Quote: ... Soluble CuMV-CP-containing protein solution was separated from the cellular proteins by ultracentrifugation in a sucrose gradient (20%-60% sucrose; ultracentrifugation at 25,000 rpm for 6 hours at 5°C [SW28 rotor, Beckman]). After dialysis CuMVTT-containing gradient fractions ...
-
bioRxiv - Microbiology 2019Quote: ... performed ultracentrifugation (40,000 rpm, either 4 h or 18 h, +4 °C, SW41 rotor, Beckman Coulter), and collected approximately 600 μl fractions by puncturing the tubes with a thin (23G or 25G ...
-
bioRxiv - Cancer Biology 2020Quote: ... cells were grown for 4-6 days and counted using an Incucyte (Essen Biosciences) or a Z2 Coulter Counter (Beckman Coulter). Small molecule dose-response curves were printed using an D300e Digital Dispenser (HP Specialty Printing Systems ...
-
bioRxiv - Cancer Biology 2021Quote: ... 4°C (Beckman Coulter Allegra X15r). After the final wash to remove Matrigel ...
-
bioRxiv - Molecular Biology 2021Quote: ... 4°C (SW41Ti rotor, Beckman Coulter) and 16 fractions were collected ...
-
bioRxiv - Molecular Biology 2021Quote: ... 4°C (SS34 Rotor, Beckman Coulter).
-
bioRxiv - Cell Biology 2020Quote: ... 4°C (with Beckman SW32 rotor). The pellet will contain rough microsomes and the interface between 0.25-1.3M will contain smooth microsomes ...
-
bioRxiv - Neuroscience 2021Quote: ... 4°C (Beckman Coulter F301.5 rotor) to remove large aggregates ...
-
bioRxiv - Biophysics 2023Quote: ... 4 °C (TLA-45 Beckman rotor). The solubilized proteins were separated on 4–15 % BN-gels and analyzed by immune detection using polyclonal α-YidC antibodies ...
-
bioRxiv - Microbiology 2020Quote: ... for 5 minutes using a FIBERLite F10BCI-6×500y rotor (Piramoon Technologies) in an Avanti JXN-30 centrifuge (Beckman Coulter). The clarified cell lysate was further centrifuged in a JS-24.38 rotor (Beckman Coulter ...
-
bioRxiv - Neuroscience 2021Quote: ... Samples were centrifuged at 135,000 × g for 1 hr at 4°C (Beckman OptimaTM Max centrifuge ...
-
bioRxiv - Genetics 2022Quote: ... 5 mL (Beckman Coulter, B23317) using a DynaMag™-2 Magnet magnetic stand (Thermo Fisher Scientific ...
-
bioRxiv - Molecular Biology 2019Quote: ... was loaded onto 4 ml of a 10% −30% (w/v) linear sucrose gradient and centrifuged at 74,000g at 4°C for 6 h (Beckman MLS-50 rotor). Fractions (250 µl ...
-
bioRxiv - Pathology 2020Quote: ... Hemocytes stained with 4’-6-diamidino-2-phenylindole (DAPI) were analyzed on a CytoFLEX flow cytometer with CytExpert software (Beckman-Coulter, USA). Plots of side scatter SSC-A versus forward scatter FSC-A were used for visualization of cell groups ...
-
bioRxiv - Biophysics 2023Quote: ... and at 4 °C for 1 hour for ultracentrifugation (70,658 g, Beckman, Type 70Ti) in vacuum ...
-
bioRxiv - Plant Biology 2023Quote: ... at 10,000 x g for 1 h at 4 ⁰C (JA-17 rotor, Beckman Coulter ...
-
bioRxiv - Biochemistry 2023Quote: ... for 1 hour at 4°C in a Type 45 Ti rotor (Beckman Coulter). The clarified lysate was then incubated with 5 mL of Ni-NTA agarose beads (Qiagen) ...
-
bioRxiv - Developmental Biology 2023Quote: ... cleared by ultracentrifugation at 100,000Lg for 1 hour at 4□°C (Beckman Coulter, 343775), then and vacuum-dried overnight.
-
bioRxiv - Microbiology 2024Quote: ... 4°C for 1 h in a SW 41 Ti rotor (Beckman Coulter, Inc). The pellet was resuspended in 1 ml of PBS pH 7.4 ...
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Microbiology 2020Quote: ... 4°C in an SW55Ti rotor (Beckman), and the virus pellet harvested for analysis by WB with αGag.
-
bioRxiv - Biochemistry 2020Quote: ... for 15 min at 4°C (Beckman centrifuge J-20-XP ...
-
bioRxiv - Cell Biology 2020Quote: ... 4 °C with 70Ti rotor (Beckman Coulter) to collect sEV pellets in double 0.22 μm-filtered PBS ...
-
bioRxiv - Microbiology 2022Quote: ... 4 °C in SW41 rotor (Beckman Coulter). Samples were fractionated and collected using Biocomp Piston Gradient Fractionator (BioComp Instruments) ...
-
bioRxiv - Microbiology 2022Quote: ... 4 °C in SW28 rotor (Beckman Coulter). Gradients were fractionated using Biocomp Piston Gradient Fractionator (BioComp Instruments) ...
-
bioRxiv - Microbiology 2024Quote: ... 4 °C in SW41 rotor (Beckman Coulter). Polysomes profiles were obtained using Biocomp Piston Gradient Fractionator (BioComp Instruments ...
-
bioRxiv - Microbiology 2024Quote: ... 4°C (Optima TLX Ultracentrifuge, Beckman Coulter). The pellet was resuspended in 200 µL of ultrapure water.
-
bioRxiv - Cell Biology 2021Quote: ... then finally at 100,000 g for 4 h at 4 ℃ using an SW28 rotor (Beckman Coulter, Fullerton, CA, USA). The pelleted exosomes were collected then subsequently resuspended in PBS ...
-
bioRxiv - Cell Biology 2021Quote: ... Hettich) at 4°C and then centrifuged at 40000 rpm for 4h30 at 4°C using SW41Ti rotor (Beckman). The supernatant was then UV inactivated at a wavelength of 254 nm for 4 min (3 times ...
-
bioRxiv - Microbiology 2023Quote: ... The lysates containing matured PsVs were loaded on an OptiPrep gradient that had been stabilized at least 1 h and centrifuged at 50k x g for 3.5-4 h at 4°C in a SW-55Ti rotor (Beckman). Fractions were collected in siliconized tubes and subjected to SDS-PAGE followed by Coomassie blue staining to assess the abundance of L1 and L2 proteins ...
-
bioRxiv - Cell Biology 2023Quote: ... Samples were spun at 200,000 × g at 4°C for 4 h in an MLS-50 rotor (Beckman Coulter), and 60 µL of top layer was collected ...
-
bioRxiv - Developmental Biology 2023Quote: ... and centrifuged at 40,000 rpm for 1 h at 4°C (Beckman SW-41Ti rotor). Supernatants were discarded ...
-
bioRxiv - Biophysics 2019Quote: ... Total volume was centrifuged at 10000 xg for 30 minutes at 4°C at 10000 xg for 30 minutes at 4 °C (Beckman Coulter Optima L-80 XP Ultracentrifuge ...
-
bioRxiv - Biochemistry 2020Quote: ... which were centrifuged at 50,000rpm for 4 hours at 4°C using a TLS55 rotor and an Optima MAX-XP Ultracentrifuge (Beckman Coulter). The sample was physically fractionated into 10 fractions of 85 uL each ...
-
bioRxiv - Molecular Biology 2022Quote: ... 800 µl of EDTA-treated lysate was layered on top of the sucrose gradient and ultracentrifuged at 35000 rpm for 4 hours at 4 °C in a SW41Ti rotor (Beckman). After centrifugation ...
-
bioRxiv - Immunology 2020Quote: ... all CCMV CP preparations were purified two times using an ultracentrifuge and 30% sucrose cushion – first with additional 0.5% Triton X-100 and the second time without Triton X-100 (4 h, 50 000 rmp, 4°C; Type 70Ti rotor, Beckman) and the pellet was then dissolved in buffer A ...
-
bioRxiv - Cell Biology 2022Quote: ... 4–40% sucrose gradient prepared in lysis buffer and centrifuged at 150,000 × g for 4 or 16 h at 4°C in a MLS-50 rotor (Beckman Coulter). Thereafter ...
-
bioRxiv - Neuroscience 2023Quote: ... the samples were filtered with a membrane pore size of 0.2 μm and centrifuged at 120,000 × g for 4 h at 4 °C in polycarbonate bottle assemblies (Beckman coulter, 355603) in a 70.1 Ti fixed angle rotor (Beckman coulter ...