Labshake search
Citations for Beckman :
851 - 900 of 1167 citations for 6 chloro 4 methoxyquinoline since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Developmental Biology 2023Quote: ... The resulting supernatant was subjected to ultracentrifugation at 120,000 × g at 4°C for 2 h (Optima Max TL, Beckman Coulter). Pellets were resuspended in 1 ml cold PBS and centrifuged at 120,000 × g at 4°C for 2 h ...
-
bioRxiv - Immunology 2023Quote: ... and purified and concentrated by ultracentrifugation on a 20% sucrose cushion (24,000 rpm and 4°C for 2 hours with a SW32Ti or SW28 rotor (Beckman Coulter)) ...
-
bioRxiv - Pathology 2023Quote: ... The mixture was then layered under a 20–40% discontinuous iodixanol gradient and centrifuged at 260,000 g for 15h at 4°C using an SW 41 Ti Rotor (Beckman Coulter). After spinning ...
-
bioRxiv - Neuroscience 2023Quote: ... and samples were centrifuged at 24,000 rpm at 4°C for 1h in a SW41Ti Swinging-Bucket Rotor (Beckman Coulter). After discarding the supernatant ...
-
bioRxiv - Cell Biology 2023Quote: ... The samples were sedimented by velocity centrifugation at 36,000 x rpm for 2 h at 4°C using SW40Ti rotor in Optima L-80XP ultracentrifuge (Beckman Coulter). Absorbance at 254 nm was measured from lower to higher sucrose gradients using an ISCO gradient fractionation system and the optical density at 254 nm was continuously recorded with a Foxy JR Fractionator (Teledyne ISCO).
-
bioRxiv - Microbiology 2024Quote: ... The resulting gradient was then subjected to centrifugation for 16 hours at 150,000 x g and 4 °C (SW55 Ti rotor, Beckman-Coulter). Sample banding was visually observed at the interface of the 30% and 20% fractions (Supporting Information ...
-
bioRxiv - Cell Biology 2024Quote: ... The step gradients were centrifuged for 5 h at 132.000 x g at 4 °C (SW60 Beckman and Coulter, # 335649). Subsequently ...
-
bioRxiv - Cell Biology 2024Quote: ... The same amounts of proteins were loaded on a double sucrose cushion (20% and 30% sucrose) and centrifuged at 190,000 g for 2 h at 4 °C in an Optima L-100XP ultracentrifuge (Beckman–Coulter). Extracts were incubated with pre-washed anti-Flag beads (Sigma ...
-
bioRxiv - Neuroscience 2024Quote: ... Digested samples were ultracentrifuged at 100,000x g for 1 h at 4 °C using a TLA-55 rotor (Beckman Coulter) to concentrate the insoluble ...
-
bioRxiv - Immunology 2023Quote: ... virus solutions were clarified of debris by centrifugation at 10,000 rpm at 4°C for 30 minutes in a chilled SW32Ti rotor (Beckman Coulter), followed by pelleting through a 30% cold sucrose solution at 25,000 rpm for 90 minutes ...
-
bioRxiv - Microbiology 2023Quote: ... Medium was cleared from EVs by ultracentrifugation at 100,000 ×g for 18 h at 4°C in a LE-80 ultracentrifuge (Beckman Coulter) with a 60Ti rotor [13] ...
-
bioRxiv - Microbiology 2023Quote: ... Cells were washed twice with 200µl BD 1X Perm/Wash solution and stained 1h at 4°C with anti-HIV-1 p24 (RD1/PE, Beckman Coulter #6604667 ...
-
bioRxiv - Biochemistry 2023Quote: ... The sucrose density gradient was centrifuged at 50,000 rpm for 3 hours at 4°C in a TLS-55 swinging bucket rotor (Beckman Coulter) with minimum acceleration up to 5,000 RPM and deceleration with no break ...
-
bioRxiv - Biochemistry 2023Quote: ... The diluted extract was then centrifuged at 31,200 rpm for 30 minutes at 4°C in a Type 70 Ti rotor (Beckman Coulter). The supernatant was filtered through a 0.45 µm syringe filter (Millex-GP PES membrane (Millipore SLHP033RS ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was centrifuged at 40,000 rpm for 60 min at 4°C (XPN-100 ultracentrifuge, Type 45 Ti rotor, Beckman, USA). The supernatant was filtered through a 0.45 μm filter (Pall ...
-
bioRxiv - Bioengineering 2023Quote: ... For performing cryogenic transmission electron microscopic imaging EVs were centrifuged and washed in PBS at 100,000 x g for 3 hours at 4°C in a SW41 Ti rotor (Beckman Coulter).
-
bioRxiv - Bioengineering 2023Quote: ... The final supernatant was centrifuged at 100,000g at 4°C for 70 min using an ultracentrifuge (Optima MAX-XP Tabletop Ultracentrifuge, Beckman Coulter). The pellet was either used immediately or stored dry at −80°C ...
-
bioRxiv - Biochemistry 2023Quote: ... and the mixtures were then layered under a 20-40% iodixanol discontinuous gradient before to be centrifuged at 260,000 x g for 16h at 4°C using an SW41 Ti rotor (Beckman Coulter). After spinning ...
-
bioRxiv - Cancer Biology 2023Quote: ... Filtered supernatants were concentrated by ultracentrifugation at 22.000 rpm for 2h at 4°C with OptimaTM L-90K ultracentrifuge (Beckman Coulter) and stored at −80°C (never refrozen).
-
bioRxiv - Cell Biology 2023Quote: ... and pelleted at 100,000xg for 20 min at 4 °C using fixed angle rotor (TLA-100 rotor, Beckman Coulter, 349481) in a benchtop ultracentrifuge (OptimaTL ...
-
bioRxiv - Cell Biology 2023Quote: ... Equilibrated tubes were ultra-centrifuged at 100,000xg for 1h at 4°C using a swinging-bucket rotor (SW 32Ti, Beckman Coulter, 369650; Optima XE, Beckman Coulter). Phagosome-containing beads float at the interface between the 10% and 25% layers ...
-
bioRxiv - Biophysics 2023Quote: ... The lysate was clarified by centrifugation at 40,000 rpm for 35 min at 4°C (Type 45 Ti Rotor, Beckman Coulter). The resulting supernatant was mixed with 1ml pre-washed IgG Sepharose 6 FastFlow beads (Cytiva ...
-
bioRxiv - Microbiology 2023Quote: ... Media was cleared from EVs by ultracentrifugation at 100,000×g for 18 h at 4 °C in a LE-80 ultracentrifuge (Beckman Coulter) with a 60Ti rotor ...
-
bioRxiv - Biophysics 2023Quote: ... Centrifugation was performed at 154,300 × g for 24 h at 4◦C (SW 41 Ti swinging-bucket rotor, Beckman Coulter). The separated bands were collected dropwise from the bottom of the tube ...
-
bioRxiv - Cell Biology 2023Quote: ... The concentrated CFS was then ultracentrifuged at 100,000 ˗ g and 4 °C for 3 h (Optima L-80 XP Ultracentrifuge with Type 70.1 Ti Fixed-Angle Titanium Rotor (Beckman Coulter)) ...
-
bioRxiv - Biochemistry 2024Quote: ... The homogenate was clarified by centrifugation for 30 min at 70,560 × g at 4°C in an Optima XPN Ultracentrifuge (Beckman Coulter) using a Ti-45 rotor ...
-
bioRxiv - Cell Biology 2024Quote: ... The samples were then centrifuged for 1 h at 100,000 g and 4°C in a TLS 55 rotor (Beckman-Coulter) with the appropriate adapters (#358614) ...
-
bioRxiv - Plant Biology 2024Quote: ... and centrifuged at 10,000 x g for 30 min at 4°C using a TLA100.3 fixed angle rotor and an Optima TLX Ultracentrifuge (Beckman Coulter).
-
bioRxiv - Microbiology 2024Quote: ... sucrose gradients prepared with buffer C and centrifuged for 16 h at 71,935 g at 4 °C in a SW28 rotor (Beckman Coulter). Gradients were fractionated on a Biocomp Piston Gradient Fractionator (BioComp Instruments ...
-
bioRxiv - Microbiology 2024Quote: ... 20 mL of supernatant was gently layered on top of 10mL of 20% sucrose dissolved in PBS (4°C, sterile filtered) in an ultra-clear 1×3.5′ centrifuge tube (Beckman 344058). The tubes were spun down in a SW28 rotor (Beckman ...
-
bioRxiv - Neuroscience 2024Quote: ... and samples were centrifuged at 24,000 rpm at 4°C for 1h in a SW41Ti Swinging-Bucket Rotor (Beckman Coulter). After discarding the supernatant ...
-
bioRxiv - Molecular Biology 2024Quote: ... and EVs were pelleted by ultracentrifugation for 60 minutes at 100,000 x g at 4 ° C in an SW40.Ti rotor (Beckman Coulter). After centrifugation ...
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were clarified by ultracentrifugation at 4℃ at 184,000 x (g) in a 70Ti rotor for 50 minutes (Beckman Coulter). After affinity chromatography with StrepTactin SuperFlow resin (IBA) ...
-
bioRxiv - Biochemistry 2024Quote: ... A crude ribosome pellet was obtained by centrifugation for 2h at 200,000 × g at 4 °C (70Ti rotor, Beckman Coulter) and solubilized in HMA6/30 for 16h at 4°C ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... EVs were purified from concentrated HES by ultracentrifugation at 100,000 x g for 90 mins at 4 °C in polyallomer tubes (Beckman Coulter) in a SW40 rotor (Beckman Coulter) ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... and pelleted each time by ultracentrifugation at 100,000 x g for 70 mins at 4 °C in polyallomer tubes (Beckman Coulter) in a SW40 rotor (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were clarified by ultracentrifugation for 35 minutes at 4℃ at 70,000 x (g) in a 45Ti rotor (Beckman Coulter). Constructs containing N-terminal TOG domains (TOG1 ...
-
bioRxiv - Plant Biology 2021Quote: ... the samples were centrifuged at 35 000 RPM for 18 hours at 4°C in a 70Ti rotor and L8-M ultracentrifuge (Beckman Coulter). The ribosome pellets were then gently washed with RNase-free water and resuspended in 300 μl of resuspension buffer (100 mM Tris·HCl (pH 8.0) ...
-
bioRxiv - Cell Biology 2019Quote: ... by ultracentrifugation at 150,000 × g for 12 h at 4°C using an Optima L-100XP centrifuge equipped with a SW55Ti rotor (Beckman Coulter). Eleven fractions were collected from the top of the sucrose gradient.
-
bioRxiv - Evolutionary Biology 2021Quote: ... using a Beckman Coulter TLA100 rotor at 70,000 rpm at 4 C for 2 hours in a 13 mm x 51 mm polycarbonate ultracentrifuge tube (Beckman Coulter 349622). The sucrose solution was removed from the tube ...
-
bioRxiv - Molecular Biology 2021Quote: ... The gradient was ultracentrifuged at 55,000 rpm for 55 min at 4 °C with max acceleration and slow deceleration using an Optima LE-80K Ultracentrifuge and SW55Ti rotor (Beckman Coulter). The sucrose gradient was fractionated according to the number of associated ribosomes as determined by the profile of the absorbance at 254 nm using a Density Gradient Fractionation System (Brandel ...
-
bioRxiv - Neuroscience 2021Quote: ... This was incubated for 1 hour at room temperature while rotating before centrifugation at 100,000 x g for 90 minutes at 4°C using the Optima™ MAX-XP Ultracentrifuge (Beckman Coulter). The supernatant was then collected (sarkosyl-soluble fraction) ...
-
bioRxiv - Molecular Biology 2021Quote: ... pombe cells were pelleted down for 10 min at 5000 rpm at 4°C (Rotor: F10-6X500, FiberLite Beckman J2-MC). The pellet was washed with buffer 1 (HEPES- 20 mM ...
-
bioRxiv - Bioengineering 2022Quote: ... The 60-70 mL were then divided equally into two 50-mL centrifuge tubes and spun down outside the anaerobic chamber at 4 °C and 3500 rpm for 10 min using an Allegra 64R ultracentrifuge (Beckman Coulter). Next ...
-
bioRxiv - Bioengineering 2022Quote: ... Each 250 mL culture was divided equally into six 50-mL centrifuge tubes and spun down at 4 °C and 3500 rpm for 10 min using an Allegra 64R centrifuge (Beckman Coulter). The supernatant was discarded and 6 mL of ice-cold 10% glycerol was used to wash and combine the six cell pellets into one suspension ...
-
bioRxiv - Genomics 2020Quote: ... Lentiviral supernatant was collected at 48 and 72hrs post-transfection and subsequently concentrated by ultracentrifugation (24,000 rpm, 4°C, 2hrs) (Beckman Coulter SW32).
-
bioRxiv - Biophysics 2019Quote: AUC-SV analyses were performed in XL-A analytical ultracentrifuge equipped with a 4-hole An-60 Ti rotor and 12-mm double-sector charcoal-filled epon centerpieces (Beckman Coulter). Sedimentation velocity measurements using absorbance optics of reference buffer and samples in 20 mM Tris-HCl (pH 8.0) ...
-
bioRxiv - Cell Biology 2019Quote: Viability of unlabeled and ferumoxytol-labeled murine MSCs (n=4) and human MSCs (n=3) was assessed by Trypan blue dye exclusion using ViCell (Beckman Coulter).
-
bioRxiv - Molecular Biology 2019Quote: ... The cleared supernatant was layered over 15-40% sucrose gradients in disassociation buffer and spun 28000 rpm for 16 hours at 4°C in a SW-32 rotor (Beckman-Coulter). Gradients were fractionated with an ISCO fractionation system and 30S + 50S peaks were combined ...
-
bioRxiv - Genetics 2020Quote: ... The homogenates were incubated on ice for 15–20 min and then centrifuged at 3000xg for 10 min at 4°C in a GPR Data Settop centrifuge (Beckman, Inc.). The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042 ...