Labshake search
Citations for Beckman :
851 - 900 of 1911 citations for 4 Methoxy 2 2 3 4 5 5 Hexacb Unlabeled 50 Ug Ml In Nonane since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2023Quote: ... and then centrifuged at 260,800 x g for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman–Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and Red-C12 fluorescence of the starting material ...
-
bioRxiv - Cell Biology 2023Quote: ... After cell debris and undisrupted cells were removed by centrifugation (45,000 rpm, 30 min, 4°C, 70Ti rotor; Beckman), supernatant was applied to an open column with Ni-IMAC resin (BIO-RAD) ...
-
bioRxiv - Plant Biology 2023Quote: ... The cel lysates were clarified by high-speed centrifugation at 50,000g for 60 min at 4°C (Avanti J-26 XP centrifuge with JA-25.50 rotor; Beckman Coulter), followed by a 0.45-mm filtration (Millex-HP ...
-
bioRxiv - Molecular Biology 2024Quote: ... Virus was then purified by centrifugation through a 20% sucrose cushion at 25,000 rpm for 2.5 hours at 4 °C in a Sw32Ti rotor (Beckman Coulter). Virus pellets were resuspended in PBS and virus genomic RNA copy number was quantified by RTqPCR as described above ...
-
Ribonuclease Inhibitor and Angiogenin collaboratively regulate cell-type-specific global translationbioRxiv - Biochemistry 2024Quote: ... and were centrifuged at 39,000 rpm for 2.45 hours at 4°C using Optima XPN-80 Ultracentrifuge (Beckman Coulter). Following centrifugation ...
-
bioRxiv - Microbiology 2023Quote: ... The denatured protein fraction was then removed via ultracentrifugation at 100,000 g for 20 min at 4°C (Beckman Coulter Optima XE-90 – IVD ultracentrifuge with a 42.2 Ti rotor) ...
-
bioRxiv - Molecular Biology 2023Quote: ... Small extracellular vesicles were pelleted at 100,000 X g for 1,5 h at 4°C by using Ti-45 rotor (Beckman Coulter) and 70 ml polycarbonate bottles (Beckman Coulter ...
-
bioRxiv - Neuroscience 2023Quote: ... NP-40 prepared in DPBS] and then ultracentrifuged at 100,000x g for 1 h at 4 °C using a TLA-55 rotor (Beckman). The supernatant was removed ...
-
bioRxiv - Cell Biology 2023Quote: ... Equilibrated tubes were ultra-centrifuged at 100,000xg for 1h at 4°C using a swinging-bucket rotor (SW 32Ti, Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... of proteins were applied on the top of a 16 ml 10-30% continuous sucrose density gradient and centrifuged at 74,400 g for 15 h at 4 °C (SW 32.1 Ti; Beckman Coulter). 24 equal volume fractions were collected ...
-
bioRxiv - Biochemistry 2023Quote: ... at 18000 PSI and cell debris were separated by centrifugation (4 °C, 30 min, 75,600 ×g, JA25.50 rotor Beckman Coulter). The supernatant was loaded on an affinity chromatography column (GE Healthcare ...
-
bioRxiv - Biochemistry 2023Quote: ... The mixture was incubated for 30 min at 4 °C and centrifuged at 100,000 × g at 4 °C for 1 h using a TLA100 fixed angle rotor (Beckman). The supernatant fraction was carefully removed ...
-
bioRxiv - Cell Biology 2023Quote: ... Solutions of 15% and 23% Optiprep were layered on top or below the sample and centrifuged at 4°C for 16 h at 120,000g in a SW 28 Ti swinging bucket rotor (Beckman).
-
bioRxiv - Molecular Biology 2024Quote: ... for ultracentrifugation at 100,000 × g for 1 hour at 4°C (JXN-30 centrifuge, JA-30.50 Ti Rotor, Beckman Coulter). The pellet was washed with PBS and centrifuged again at 100,000 × g for 1 hour at 4°C to remove soluble contaminant ...
-
bioRxiv - Neuroscience 2024Quote: ... by centrifugation at 5,000 x g at 4°C for 30 minutes in a fixed angle rotor (Beckman Coulter). The qEV column washed with 1x PBS was then loaded with 500 µL of concentrated supernatant followed by 2.5 mL PBS to collect 3 mL void volume ...
-
bioRxiv - Neuroscience 2024Quote: ... and PBS was added to reach a 4.5 mL tube filling and centrifuged at 120,000xg for 100 min at 4°C in the L-60 Optima Ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2024Quote: ... the beads were collected with centrifugation at 13,894 rpm (16,000 rcf) at 4 ºC for 20 min using SX241.5 rotor in Allegron X-30R (Beckman Coulter) and resuspended with 200 µL of PBS containing 15∼30 % glycerol ...
-
bioRxiv - Molecular Biology 2024Quote: ... The soluble fraction was collected through centrifugation at 20,000 rpm (46,502 rcf) at 4 ºC for 30 min using a 45Ti rotor in Optima L80 (Beckman Coulter) and applied to the HisTrap HP column (Cytiva) ...
-
bioRxiv - Molecular Biology 2024Quote: ... and spun at 32,000 rpm (max 124,436 rcf) and 4 ºC for 13 h using SW55Ti rotor in Optima L80 (Beckman Coulter). The centrifuged samples were fractionated from the top of the sucrose gradient ...
-
bioRxiv - Molecular Biology 2024Quote: ... The soluble fraction was collected by centrifugation at 20,000 rpm (46,502 rcf) at 4 ºC for 30 min using a 45Ti rotor in Optima L80 (Beckman Coulter) and applied to a HisTrap HP column (Cytiva) ...
-
bioRxiv - Molecular Biology 2024Quote: ... and the soluble fraction was collected by centrifugation at 20,000 rpm (46,502 rcf) at 4 ºC for 30 min using a 45Ti rotor in Optima L80 (Beckman Coulter). This fraction was then mixed with Ni-NTA agarose beads (Qiagen) ...
-
bioRxiv - Molecular Biology 2024Quote: ... The soluble fraction was collected with centrifugation at 20,000 rpm (46,502 rcf) at 4 ºC for 30 min using a 45Ti rotor in Optima L80 (Beckman Coulter) and applied to the HisTrap HP column (Cytiva) ...
-
bioRxiv - Biochemistry 2023Quote: ... lysates were centrifuged at 60,000 x g (4 °C) for 45 min (Beckman Avanti JXN-26 (rotor: JA 25.5)) and immediately supplemented with 10 mL pre-washed Ni2+-NTA agarose (QIAGEN ...
-
bioRxiv - Molecular Biology 2024Quote: ... and 1 M sucrose) at 100,000 rpm (543,000 × g) and 4°C for 1 h with a TLA110 rotor (Beckman Coulter) and an Optima MAX-TL Ultracentrifuge (Beckman Coulter) ...
-
bioRxiv - Cell Biology 2020Quote: ... and the suspensions were ultracentrifuged at 100,000 × g for 1 h in MLS-50 rotor (Beckman Coulter) to wash the samples (final sample ...
-
bioRxiv - Microbiology 2023Quote: ... 50 µg/ml CHX) prepared using a BioComp gradient master in ultra-clear centrifuge tubes (Beckman Coulter) and centrifuged for 2:30 hours at 36.000 rpm in an SW41 rotor ...
-
bioRxiv - Synthetic Biology 2021Quote: ... 72C for 2’) and a X0.65 SPRI bead DNA clean up (AMPure XP, Beckman Coulter) a second PCR using a p5 primer (F6 ...
-
bioRxiv - Systems Biology 2022Quote: ... Final libraries were size-selected by performing 2-step bead cleaning (SPRIselect, Beckman Coulter B23318) to remove larger DNA fragments and primer dimers and quality was assessed by Bioanalyzer (Agilent 2100 ...
-
bioRxiv - Immunology 2022Quote: ... and SARS-CoV-2 RBD+ were sorted with MoFlo Astrios EQ Cell Sorter (Beckman Coulter).
-
bioRxiv - Immunology 2022Quote: ... and SARS-CoV-2 RBD+ were sorted with MoFlo Astrios EQ Cell Sorter (Beckman Coulter). FACS data were analyzed using FlowJo™ v10.8 (BD Biosciences).
-
bioRxiv - Genomics 2022Quote: ... then ultracentrifuge at 24,000 rpm for 2 h using SW28 swinging bucket rotor (Beckman Coulter). Upon completion ...
-
bioRxiv - Microbiology 2022Quote: ... The filtrate was then ultracentrifuged 100,000 g for 2 hours (Optima L-90K, Beckman Coulter). The vesicle pellet was resuspended in 100 μl of sterile PBS.
-
bioRxiv - Genomics 2023Quote: ... then ultracentrifuge at 24,000 rpm for 2 h using SW28 swinging bucket rotor (Beckman Coulter). Upon completion ...
-
bioRxiv - Microbiology 2024Quote: ... reinhardtii cell density and size were determined using a hemocytometer and ImageJ or a Beckman Coulter Multisizer 3 with a 50 μm orifice (Beckman Coulter, CA, USA). Bacterial cell density was determined by counting colony forming units (CFU ...
-
An anti-amyloidogenic treatment to specifically block the consolidation of traumatic events in mousebioRxiv - Animal Behavior and Cognition 2020Quote: ... the rest of the volume was centrifuged for 5 minutes at 4,000 rpm (Microfugue 18 centrifuge, Beckman Coulter) to obtain the cell debris fraction (P1 ...
-
bioRxiv - Biochemistry 2021Quote: ... The labeled peptides were further purified by C-18 (5 μm, 4.6 mm × 150 mm, Beckman Coulter Inc.) reverse phase-high performance liquid chromatography ...
-
bioRxiv - Biochemistry 2020Quote: ... After 20 minutes the cells were collected by centrifugation (8,000 rpm, 5 minutes, JLA-16.25 Beckman Coulter rotor), dissolved in 0.5 mL of HEPES:Polymix buffer (5 mM Mg(OAc)2 ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... and washed in 5 volumes of chloroplast wash buffer (8 °C, manual stop when reaching 3000 RPM, Beckman JA-20 ...
-
bioRxiv - Molecular Biology 2023Quote: ... Dialyzed nucleosomes were purified in a 5-30% w/v sucrose gradient with a SW41 Ti (Beckman Coulter) rotor in an Optima L-90K ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Biochemistry 2021Quote: ... 10 U/mL SuperASE-In and was ultracentrifuged at 100,000 × g for for 16 h at 4 °C in a SW Ti41 rotor (Beckman Coulter). After removing the supernatant ...
-
bioRxiv - Biochemistry 2021Quote: ... The lysate was clarified by ultracentrifugation at 30,000 × g 30 min at 4°C using a Ti45 rotor (Beckman Coulter) twice ...
-
bioRxiv - Biophysics 2020Quote: ... Escherichia coli BL21 cells overexpressing α-synuclein were collected by centrifugation (20 min, 4000 rpm, 4 °C) in a JLA-8.1000 rotor in a Beckman Avanti J25 centrifuge (Beckman Coulter), resuspended in lysis buffer (10 mM Tris ...
-
bioRxiv - Biophysics 2020Quote: ... The insect cells were harvested after 4 days by centrifugation at 300 g for 10 min at 4 °C in an Avanti J-26S ultracentrifuge (JLA-9.1000 rotor, Beckman Coulter). The cell pellet was resuspended in 5 ml ice-cold phosphate buffered saline (PBS ...
-
bioRxiv - Biophysics 2020Quote: ... and centrifuged at 45000 x g for 60 min at 4 °C in the Avanti J-26S ultracentrifuge (JA-30.50Ti rotor, Beckman Coulter). The cleared cell lysate was incubated in a lysis buffer-equilibrated Ni-NTA column (HisPur Ni-NTA Superflow Agarose ...
-
bioRxiv - Cell Biology 2020Quote: ... Crude mitochondria were loaded on top of the chilled gradient and separated at 100,000 Å∼ g for 1 h at 4°C (SW41 rotor; Beckman). Intact purified mitochondria were recovered from a brown band at around 16% Histodenz™ concentration ...
-
bioRxiv - Cell Biology 2020Quote: ... and the gradient was centrifuged for 60 min at 24,700 × g at 4 °C using a TLS-55 swinging bucket rotor (Beckman Coulter). Purified mouse POS were resuspended in DMEM/Ham’s F-12 containing 2.5% sucrose ...
-
bioRxiv - Cell Biology 2020Quote: ... lysed by sonication (UD-201 ultrasonic disrupter, Tomy Seiko), and centrifuged at 50,000 rpm (70 min, 4°C) with a 70 Ti rotor (Beckman Coulter). GST-His6-tagged LC3B-His12 and GATE-16-His12 proteins in the supernatants obtained were isolated by mixing with COSMOGEL GST-Accept beads (50% slurry ...
-
bioRxiv - Immunology 2021Quote: ... the culture medium containing the lentiviral particles was collected and ultracentrifuged at 25,000 rpm for 90 min at 4 °C using a Beckman SW28 ultracentrifuge rotor (Beckman Coulter) for the obtention of concentrated virus ...
-
bioRxiv - Microbiology 2019Quote: ... Samples were centrifuged at 27,000 x rpm for 16 hrs at 4°C in an Optima L-100 XP ultracentrifuge (Beckman Coulter) using a SW32Ti rotor.